In this paper, a one-class Naïve Bayesian classifier (One-NB) for detecting toll frauds in a VoIP service is proposed. Since toll frauds occur irregularly and their patterns are too diverse to be generalized as one class, conventional binary-class classification is not effective for toll fraud detection. In addition, conventional novelty detection algorithms have struggled with optimizing their parameters to achieve a stable detection performance. In order to resolve the above limitations, the original Naïve Bayesian classifier is modified to handle the novelty detection problem. In addition, a genetic algorithm (GA) is employed to increase efficiency by selecting significant variables. In order to verify the performance of One-NB, comparative experiments using five well-known novelty detectors and three binary classifiers are conducted over real call data records (CDRs) provided by a Korean VoIP service company. The experimental results show that One-NB detects toll frauds more accurately than other novelty detectors and binary classifiers when the toll frauds rates are relatively low. In addition, The performance of One-NB is found to be more stable than the benchmark methods since no parameter optimization is required for One-NB.

In sentiment classification, conventional supervised approaches heavily rely on a large amount of linguistic resources, which are costly to obtain for under-resourced languages. To overcome this scarce resource problem, there exist several methods that exploit graph-based semi-supervised learning (SSL). However, fundamental issues such as controlling label propagation, choosing the initial seeds, selecting edges have barely been studied. Our evaluation on three real datasets demonstrates that manipulating the label propagating behavior and choosing labeled seeds appropriately play a critical role in adopting graph-based SSL approaches for this task.

In this paper, we propose an optimum access method for a phase change memory (PCM) with NAND strings. A PCM with a block erase interface is proposed. The method, which has a SET block erase operation and fast RESET programming, is proposed since the SET operation causes a slow access time for conventional PCM;. From the results of measurement, the SET-ERASE operation is successfully completed while the RESET-ERASE operation is incomplete owing to serial connection. As a result, the block erase interface with the SET-ERASE and RESET program method realizes a 7.7 times faster write speed compared than a conventional RAM interface owing to the long SET time. We also give pass-transistor design guidelines for PCM with NAND strings. In addition, the write-capability and write-disturb problems are investigated. The ERASE operation for the proposed device structure can be realized with the same current as that for the SET operation of a single cell. For the pass transistor, about 4.4 times larger on-current is needed to carry out the RESET operation and to avoid the write-disturb problem than the minimum RESET current of a single cell. In this paper, the SET programming method is also verified for a conventional RAM interface. The experimental results show that the write-capability and write-disturb problems are negligible.

k-NN classification has been applied to classify normal tissues in MR images. However, the intensity inhomogeneity of MR images forces conventional k-NN classification into significant misclassification errors. This letter proposes a new interleaved method, which combines k-NN classification and bias field estimation in an energy minimization framework, to simultaneously overcome the limitation of misclassifications in conventional k-NN classification and correct the bias field of observed images. Experiments demonstrate the effectiveness and advantages of the proposed algorithm.

In this Letter, a new face recognition approach based on curvelets and local ternary patterns (LTP) is proposed. First, we observe that the curvelet transform is a new anisotropic multi-resolution transform and can efficiently represent edge discontinuities in face images, and that the LTP operator is one of the best texture descriptors in terms of characterizing face image details. This motivated us to decompose the image using the curvelet transform, and extract the features in different frequency bands. As revealed by curvelet transform properties, the highest frequency band information represents the noisy information, so we directly drop it from feature selection. The lowest frequency band mainly contains coarse image information, and thus we deal with it more precisely to extract features as the face's details using LTP. The remaining frequency bands mainly represent edge information, and we normalize them for achieving explicit structure information. Then, all the extracted features are put together as the elementary feature set. With these features, we can reduce the features' dimension using PCA, and then use the sparse sensing technique for face recognition. Experiments on the Yale database, the extended Yale B database, and the CMU PIE database show the effectiveness of the proposed methods.

Canonical correlation analysis (CCA) is applied to extract features for microphone classification. We utilized the coherence between near-silence regions. Experimental results show the promise of canonical correlation features for microphone classification.

In this paper, we propose a robust speech/music classification algorithm to improve the performance of speech/music classification in the selectable mode vocoder (SMV) of 3GPP2 using deep belief networks (DBNs), which is a powerful hierarchical generative model for feature extraction and can determine the underlying discriminative characteristic of the extracted features. The six feature vectors selected from the relevant parameters of the SMV are applied to the visible layer in the proposed DBN-based method. The performance of the proposed algorithm is evaluated using the detection accuracy and error probability of speech and music for various music genres. The proposed algorithm yields better results when compared with the original SMV method and support vector machine (SVM) based method.

In this paper, a simple yet efficient texture representation is proposed for texture classification by exploring the joint statistics of local quantized patterns (jsLQP). In order to combine information of different domains, the Gaussian derivative filters are first employed to obtain the multi-scale gradient responses. Then, three feature maps are generated by encoding the local quantized binary and ternary patterns in the image space and the gradient space. Finally, these feature maps are hybridly encoded, and their joint histogram is used as the final texture representation. Extensive experiments demonstrate that the proposed method outperforms state-of-the-art LBP based and even learning based methods for texture classification.

Text sentiment classification aims to automatically classify subjective documents into different sentiment-oriented categories (e.g. positive/negative). Given the high dimensionality of features describing documents, how to effectively select the most useful ones, referred to as sentiment-bearing features, with a lack of sentiment class labels is crucial for improving the classification performance. This paper proposes an unsupervised sentiment-bearing feature selection method (USFS), which incorporates sentiment discriminant analysis (SDA) into sentiment strength calculation (SSC). SDA applies traditional linear discriminant analysis (LDA) in an unsupervised manner without losing local sentiment information between documents. We use SSC to calculate the overall sentiment strength for each single feature based on its affinities with some sentiment priors. Experiments, performed using benchmark movie reviews, demonstrated the superior performance of USFS.

The paper introduces a novel pheromone update strategy to improve the functionality of ant colony optimization algorithms. This modification tries to extend the search area by an optimistic reinforcement strategy in which not only the most desirable sub-solution is reinforced in each step, but some of the other partial solutions with acceptable levels of optimality are also favored. therefore, it improves the desire for the other potential solutions to be selected by the following artificial ants towards a more exhaustive algorithm by increasing the overall exploration. The modifications can be adopted in all ant-based optimization algorithms; however, this paper focuses on two static problems of travelling salesman problem and classification rule mining. To work on these challenging problems we considered two ACO algorithms of ACS (Ant Colony System) and AntMiner 3.0 and modified their pheromone update strategy. As shown by simulation experiments, the novel pheromone update method can improve the behavior of both algorithms regarding almost all the performance evaluation metrics.

Traffic classification has recently gained much attention in both academic and industrial research communities. Many machine learning methods have been proposed to tackle this problem and have shown good results. However, when applied to traffic with out-of-sequence packets, the accuracy of existing machine learning approaches decreases dramatically. We observe the main reason is that the out-of-sequence packets change the spatial representation of feature vectors, which means the property of linear mapping relation among features used in machine learning approaches cannot hold any more. To address this problem, this paper proposes an Improved Dynamic Time Warping (IDTW) method, which can align two feature vectors using non-linear alignment. Experimental results on two real traces show that IDTW achieves better classification accuracy in out-of-sequence traffic classification, in comparison to existing machine learning approaches.

The classification of human motion is an important aspect of monitoring pedestrian traffic. This requires the development of advanced surveillance and monitoring systems. Methods to achieve this have been proposed using micro-Doppler radars. However, reliable long-term data and/or complicated procedures are needed to classify motion accurately with these conventional methods because their accuracy and real-time capabilities are invariably inadequate. This paper proposes an accurate and real-time method for classifying the movements of pedestrians using ultra wide-band (UWB) Doppler radar to overcome these problems. The classification of various movements is achieved by extracting feature parameters based on UWB Doppler radar images and their radial velocity distributions. Experiments were carried out assuming six types of pedestrian movements (pedestrians swinging both arms, swinging only one arm, swinging no arms, on crutches, pushing wheelchairs, and seated in wheelchairs). We found they could be classified using the proposed feature parameters and a k-nearest neighbor algorithm. A classification accuracy of 96% was achieved with a mean calculation time of 0.55s. Moreover, the classification accuracy was 99% using our proposed method for classifying three groups of pedestrian movements (normal walkers, those on crutches, and those in wheelchairs).

An S-band GaN on Si based 1kW-class SSPA system for space wireless applications is proposed. Since high-efficiency and high-reliability amplifier is one of the most important technologies for power and communication systems in a future space base station on a planet, compact, high-power, and high-efficiency SSPA is strongly requested instead of TWTA. Thus, we adopt GaN on Si based amplifier due to its remarkable material properties. At the beginning, thermal vacuum and radiation test of GaN on Si are conducted so as to confirm the space applicability. Fabricated SSPA system consists of eight 200W HPAs and coaxial waveguide power combiner. It achieves high efficiency such as 57% of drain efficiency and 87% of combining efficiency when RF output power achieves more than 60dBm. Furthermore, long-term stable operation and good phase noise characteristics are also confirmed.

Reducing the time complexity of character matching is critical to the development of efficient Japanese Optical Character Recognition (OCR) systems. To shorten the processing time, recognition is usually split into separate pre-classification and precise recognition stages. For high overall recognition performance, the pre-classification stage must both have very high classification accuracy and return only a small number of putative character categories for further processing. Furthermore, for any practical system, the speed of the pre-classification stage is also critical. The associative matching (AM) method has often been used for fast pre-classification because of its use of a hash table and reliance on just logical bit operations to select categories, both of which make it highly efficient. However, a certain level of redundancy exists in the hash table because it is constructed using only the minimum and maximum values of the data on each axis and therefore does not take account of the distribution of the data. We propose a novel method based on the AM method that satisfies the performance criteria described above but in a fraction of the time by modifying the hash table to reduce the range of each category of training characters. Furthermore, we show that our approach outperforms pre-classification by VQ clustering, ANN, LSH and AM in terms of classification accuracy, reducing the number of candidate categories and total processing time across an evaluation test set comprising 116,528 Japanese character images.

Design equations for satisfying off-nominal operating conditions of the class E amplifier with a nonlinear shunt capacitance for a grading coefficient of 0.5 and the duty cycle D=0.5 are derived. By exploiting the off-nominal class E operation, various amplifier parameters such as input voltage, operating frequency, output power, and load resistance can be set as design specifications. As a result of the analysis in this paper, the following extension of the usability of the class E amplifier was achieved. With rising up the dc supply voltage, the shunt capacitance which achieves the off-nominal operation can be increased. This means that a transistor with higher output capacitance can be used for ZVS operation. This also means that maximum operating frequency which achieves ZVS can be increased. An example of a design procedure of the class E amplifier is given. The theoretical results were verified with an experiment.

In the image classification applications, the test sample with multiple man-handcrafted descriptions can be sparsely represented by a few training subjects. Our paper is motivated by the success of multi-task joint sparse representation (MTJSR), and considers that the different modalities of features not only have the constraint of joint sparsity across different tasks, but also have the constraint of local manifold structure across different features. We introduce the constraint of local manifold structure into the MTJSR framework, and propose the Locality-constrained multi-task joint sparse representation method (LC-MTJSR). During the optimization of the formulated objective, the stochastic gradient descent method is used to guarantee fast convergence rate, which is essential for large-scale image categorization. Experiments on several challenging object classification datasets show that our proposed algorithm is better than the MTJSR, and is competitive with the state-of-the-art multiple kernel learning methods.

Aiming to alleviate the visual tracking problem of drift which reduces the abilities of almost all online visual trackers, a robust visual tracker (called CCMM tracker) is proposed with a coupled-classifier based on multiple representative appearance models. The coupled-classifier consists of root and head classifiers based on local sparse representation. The two classifiers collaborate to fulfil a tracking task within the Bayesian-based tracking framework, also to update their templates with a novel mechanism which tries to guarantee an update operation along the “right” orientation. Consequently, the tracker is more powerful in anti-interference. Meanwhile the multiple representative appearance models maintain features of the different submanifolds of the target appearance, which the target exhibited previously. The multiple models cooperatively support the coupled-classifier to recognize the target in challenging cases (such as persistent disturbance, vast change of appearance, and recovery from occlusion) with an effective strategy. The novel tracker proposed in this paper, by explicit inference, can reduce drift and handle frequent and drastic appearance variation of the target with cluttered background, which is demonstrated by the extensive experiments.

Apriori-based mining algorithms enumerate frequent patterns efficiently, but the resulting large number of patterns makes it difficult to directly apply subsequent learning tasks. Recently, efficient iterative methods are proposed for mining discriminative patterns for classification and regression. These methods iteratively execute discriminative pattern mining algorithm and update example weights to emphasize on examples which received large errors in the previous iteration. In this paper, we study a family of loss functions that induces sparsity on example weights. Most of the resulting example weights become zeros, so we can eliminate those examples from discriminative pattern mining, leading to a significant decrease in search space and time. In computational experiments we compare and evaluate various loss functions in terms of the amount of sparsity induced and resulting speed-up obtained.

Multi-label classification allows a sample to belong to multiple classes simultaneously, which is often the case in real-world applications such as text categorization and image annotation. In multi-label scenarios, taking into account correlations among multiple labels can boost the classification accuracy. However, this makes classifier training more challenging because handling multiple labels induces a high-dimensional optimization problem. In this paper, we propose a scalable multi-label method based on the least-squares probabilistic classifier. Through experiments, we show the usefulness of our proposed method.

Many successful methods for recognizing human action are spatio-temporal interest point (STIP) based methods. Given a test video sequence, for a matching-based method using a voting mechanism, each test STIP casts a vote for each action class based on its mutual information with respect to the respective class, which is measured in terms of class likelihood probability. Therefore, two issues should be addressed to improve the accuracy of action recognition. First, effective STIPs in the training set must be selected as references for accurately estimating probability. Second, discriminative STIPs in the test set must be selected for voting. This work uses ε-nearest neighbors as effective STIPs for estimating the class probability and uses a variance filter for selecting discriminative STIPs. Experimental results verify that the proposed method is more accurate than existing action recognition methods.