This paper presents the iterative progressive numerical methods (IPNMs) based on the induced dimension reduction (IDR) theorem. The IDR theorem is mainly utilized for the development of new nonstationary linear iterative solvers. On the other hand, the use of the IDR theorem enables to revise the classical linear iterative solvers like the Jacobi, the Gauss-Seidel (GS), the relaxed Jacobi, the successive overrelaxation (SOR), and the symmetric SOR (SSOR) methods. The new IPNMs are based on the revised solvers because the original one is similar to the Jacobi method. In the new IPNMs, namely the IDR-based IPNMs, we repeatedly solve linear systems of equations by using a nonstationary linear iterative solver. An initial guess and a stopping criterion are discussed in order to realize a fast computation. We treat electromagnetic wave scattering from 27 perfectly electric conducting spheres and reports comparatively the performance of the IDR-based IPNMs. However, the IDR-based SOR- and the IDR-based SSOR-type IPNMs are not subject to the above numerical test in this paper because of the problem with an optimal relaxation parameter. The performance evaluation reveals that the IDR-based IPNMs are better than the conventional ones in terms of the net computation time and the application range for the distance between objects. The IDR-based GS-type IPNM is the best among the conventional and the IDR-based IPNMs and converges 5 times faster than a standard computation by way of the boundary element method.

A simple analytical model to predict the DC MOSFET behavior under electromagnetic interference (EMI) is presented. The model is able to describe the MOSFET performance in the linear and saturation regions under EMI disturbance applied to the gate. The model consists of a unique simple equivalent circuit based on a voltage dependent current source and a reduced number of parameters which can accurately predict the drift on the drain current due to the EMI source. The analytical approach has been validated by means of electric simulation and measurements and can be easily introduced in circuit simulators. The proposed modeling technique combined with the nth-power law model of the MOSFET without EMI, significantly improves its accuracy in comparison with the n-th power law directly applied to a MOSFET under EMI impact.

In this paper, we performed six human movement simulation by a commercial software (Poser7). We performed FDTD simulations for body area network propagation with one transmitter and six receivers. Received amplitudes were calculated for every time frame of 1/30 s interval. We also demonstrated a polarization diversity effectiveness for dynamic wearable body area network propagation.

Recently, photovoltaic power systems and electric vehicles have been commonly used. Therefore, the importance of DC (direct current) switching is expected to increase in the near future. The authors have been examining a method of evaluating the electrode loss of AgNi contacts for an electromagnetic contactor with a medium DC load current at a resistive circuit. In this study, the arc energy and electrode mass changes were investigated in more detail. We carried out experiments of 100,000 operations for an electromagnetic contactor at a load current of 5 A constant with a source voltage change from 100 to 160 V. The arc duration, contact resistance, arc energy, and electrode mass changes were measured. As a result, the arc duration was found out increase with the source voltage. In addition, the stationary cathode mass change (loss) increased proportion only to the total arc energy. However, the stationary cathode loss per unit arc energy decreased at the highest source voltage.

When contact failure occurs in a connector in a coaxial high-frequency (HF) signal transmission line, it is well known that common-mode (CM) radiation occurs on the line. We focus on contact conditions in a connector causing such CM radiation. Experiments and simulations verify that CM radiation increases as the contact resistance increases. While the CM current strongly depends on the distribution pattern of contact resistances at a low resistance, the CM current does not depend on these pattern at a high resistance. Our results indicate that it is important to maintain a symmetrical distribution of contact spots whenever the number of such spots is four or more.

A sensor network consisting of a number of palm-sized nodes with small electric and magnetic sensors has been proposed to monitor local electromagnetic activities in space plasmas. In the present study, a compact loop antenna system is designed and fabricated for use in sensor nodes that can capture magnetic vector fields from ELF to MF frequencies. The performance of the developed system is shown to be sufficient to allow measurement of the magnetic field activity around artificial structures in addition to intense natural plasma waves in geospace.

This paper presents various types of iterative progressive numerical methods (IPNMs) for the computation of electromagnetic (EM) wave scattering from many objects and reports comparatively the performance of these methods. The original IPNM is similar to the Jacobi method which is one of the classical linear iterative solvers. Then the modified IPNMs are based on other classical solvers like the Gauss-Seidel (GS), the relaxed Jacobi, the successive overrelaxation (SOR), and the symmetric SOR (SSOR) methods. In the original and modified IPNMs, we repeatedly solve linear systems of equations by using a nonstationary iterative solver. An initial guess and a stopping criterion are discussed in order to realize a fast computation. We treat EM wave scattering from 27 perfectly electric conducting (PEC) spheres and evaluate the performance of the IPNMs. However, the SOR- and SSOR-type IPNMs are not subject to the above numerical test in this paper because an optimal relaxation parameter is not possible to determine in advance. The evaluation reveals that the IPNMs converge much faster than a standard BEM computation. The relaxed Jacobi-type IPNM is better than the other types in terms of the net computation time and the application range for the distance between objects.

Owing to the concerns about electromagnetic interference (EMI) from wireless local area networks (WLAN), an investigation into its impact on medical equipment is carried out. The results indicate that there is no evidence of 802.11 Wireless LAN systems being unsafe for installation inside hospital premises and only one piece of equipment was found to be susceptible to IEEE 802.11b standard.

A novel computational method is proposed to investigate electromagnetic scattering problems. It is error controllable and reliable simulation in time domain can be performed. We apply the proposed method to analysis of transient scattering from open-ended structures and discuss scattering mechanisms.

This letter presents the field uniformity characteristics of a triangular prism reverberation chamber. A reverberation chamber that generally uses a stirrer to create a uniform electric field inside is an alternative to the semi-anechoic chamber for an electromagnetic compatibility test. To overcome the size and maintenance problems of a stirrer, we propose to replace it with a Quadratic Residue Diffuser which is commonly used in acoustics. To confirm that the diffuser is a valid alternative to the stirrer, a diffuser and an equilateral triangular prism reverberation chamber are designed and fabricated for 2.3-3.0 GHz operation. To investigate the field uniformity characteristics by varying the location of the transmitting antenna, both simulation and measurement in the triangular prism reverberation chamber were also done at its two positions, respectively. A commercial program XFDTD 6.2, engaging the finite difference time domain (FDTD), is used for simulation and a cumulative probability distribution, which the IEC 61000-4-21 recommends, is used to evaluate the field uniformity. Both simulation and measurement results show that the field uniformity in the chamber satisfies the international standard requirement of 6 dB tolerance and 3dB standard deviation, which means that a diffuser can be substituted for a stirrer.

A fast calculation tool for state-dependent capacitance of power distribution network is proposed. The proposed method achieves linear time-complexity, which can be more than four orders magnitude faster than a conventional SPICE-based capacitance calculation. Large circuits that have been unanalyzable with the conventional method become analyzable for more comprehensive exploration of capacitance variation. The capacitance obtained with the proposed method agrees SPICE-based method completely (up to 5 digits), and time-linearity is confirmed through numerical experiments on various circuits. The maximum and minimum capacitances are also calculated using average and variance estimation. Calculation times are linear time-complexity, too. The proposed tool facilitates to build an accurate macro model of an LSI.

This paper presents a method of expanding the operating frequency band of a Reverberating TEM Cell (RTC) for electromagnetic compatibility (EMC) testing. To expand the operating frequency band of an RTC, this paper places a wire septum inside the cell instead of a solid septum. The maximum usable frequency (MUF) for TEM cell operation and the lowest usable frequency (LUF) for reverberating chamber operation with the wire septum are studied and compared with a conventional solid septum. The E field strengths inside the RTC are measured and evaluated. The measurement results show that the RTC with the wire septum have similar MUF to the RTC with a solid septum at TEM mode, but have much lower LUF at a reverberating mode, which proves that the operating frequency band of the RTC can be expanded by using the wire septum.

A characteristic-based constrained interpolation profile (CIP) method for solving three-dimensional, time-dependent Maxwell's equations is successfully developed. It is utilized to solve one-dimensional wave equations in the formulation of the Maxwell's equations. Calculation procedure of the CIP method for three-dimensional scattering analysis is described in details. Update equations for boundary conditions of a perfectly conducting (PEC) interface and a dielectric interface are formulated and obtained in explicit forms. Numerical analyses of electromagnetic scatterings of PEC sphere, dielectric sphere and PEC cube are performed and the scattering coefficient is calculated and compared with the Mie's analytic results. As a result, the scattering coefficients show good agreement with the Mie's results, which demonstrates the validity of the CIP method and the formulated update equations. It is also shown that the phase of the scattering coefficients determined by the CIP method are slightly more accurate than that of the FDTD method.

An algorithm is formulated for reconstructing a dielectric cylinder with the use of the T-matrix and the singular value decomposition (SVD) and is discussed through numerical examples under noisy conditions. The algorithm consists of two stages. At the first stage the measured data of scattered waves is transformed into the T-matrix. At the second stage we reconstruct the cylinder from the T-matrix. The singular value decomposition is applied in order to separate the radiating and the nonradiating currents, and the radiating current is directly obtained from the T-matrix. The nonradiating current and the object are reconstructed by decreasing a residual error of the current in the least square approximation, where linear equations are solved repeatedly. Some techniques are used in order to reduce the calculation time and to reduce the effects of noise. Numerical examples show us that the presented approach is simple and numerically feasible, and enables us to reconstruct a large object in a short time.

In this paper a new electromagnetic (EM) interference analysis is proposed using the total harmonic distortion (THD) measurement of the audio signal by the 900 MHz cordless telephones. The cordless telephone network in 900 MHz was built up to be weak in EM interference. 400 and 800 Hz of the sine-wave signal were used in transmitter (TX) system, and the receiver (RX) system was exposed to the EM interference. The THD value varies as the level of the exposed EM interference changes. The model of the cordless telephone also affects the THD value. By using fluctuation of the THD value depending on the amount of the exposure, the threshold value of the interference electric field strength was derived. Based on the derived threshold value of the electric field strength, validity of the regulation value for low power radio devices by CISPR 22 [CLASS B] and FCC is discussed.

This paper investigates the effect of several frequency modulation profiles on conducted-noise reduction in dc-dc converters with programmed switching controller. The converter is operated in variable frequency modulation regime. Twelve switching frequency modulation profiles have been studied. Some of the modulation data are prepared using MATLAB software, and others are generated online. Moreover, all the frequency profiles have been designed and implemented using FPGA and experimentally investigated. The experimental results show that the conducted-noise spreading depends on both the modulation sequence profile and the statistical characteristics of the sequence. A substantial part of the manufacturing cost of power converters for telecommunication applications involves designing filters to comply with the EMI limits. Considering this investigation significantly reduces the filter size.

Correction factors are presented for estimating the RF electromagnetic field strength in the compliance assessment of human exposure from an indoor RF radio source in the frequency range from 800 MHz to 3.5 GHz. The correction factors are derived from the increase in the spatial average electric field strength distribution, which is dependent on the building materials. The spatial average electric field strength is calculated using relative complex dielectric constants of building materials. The relative complex dielectric constant is obtained through measurement of the transmission and reflection losses for eleven kinds of building materials used in business office buildings and single family dwellings.

In this paper, the transmission and reflection properties of the microstrip line with bends are investigated using the Fourier transform and a mode-matching technique. Based on the waveguide model, the microstrip bends are modeled as the rectangular waveguides with perfect electric conducting top and bottom walls and perfect magnetic conducting side walls. Analytical closed-form expressions for transmission and reflection coefficients are developed using the residue calculus. To verify the proposed method, numerical computations are performed for comparison with 3D full-wave simulations and measurements. A quarter-wavelength transmission line scheme is also proposed to improve the signal integrity of double bend discontinuity.

In this study, a new scanning method for measuring field distributions is proposed. In this method, measurement positions are automatically decided by a magnetic tracker. This method obtains field distributions in real-time, and can display field distribution map successively by interpolating.

The data dispersion of the measurement of electromagnetic disturbance above 1 GHz is mainly affected by site imperfections (expressed by the site voltage standing wave ratio (SVSWR)). To confirm the relationship between site imperfections and the measured field strength, we measured the SVSWR and the field strength radiated from the equipment under test (EUT) by changing the area covered by the RF absorber on the metal ground plane. From the results, we found that the data dispersion of measured field strength can be estimated from the measured SVSWR, and therefore, we can determine the measurement uncertainty of the measured field strength at the test site.