To simultaneously enhance data rate and physical layer security (PLS) for low-luminance smartphone screen to camera uplink communication, space division multiplexing using high-luminance cell-size reduction arrangement is numerically analyzed and experimentally verified. The uplink consists of a low-luminance smartphone screen and an indoor telephoto camera at a long distance of 3.5 meters. The high-luminance cell-size reduction arrangement avoids the influence of spatial inter-symbol interference (ISI) and ambient light to obtain a stable low-luminance screen. To reduce the screen luminance without decreasing the screen pixel value, the arrangement reduces only the high-luminance cell area while keeping the cell spacing. In this study, two technical issues related to high-luminance cell-size reduction arrangement are solved. First, a numerical analysis and experimental results show that the high-luminance cell-size reduction arrangement is more effective in reducing the spatial ISI at low luminance than the conventional low-luminance cell arrangement. Second, in view point of PLS enhancement at wide angles, symbol error rate should be low in front of the screen and high at wide angles. A numerical analysis and experimental results show that the high-luminance cell-size reduction arrangement is more suitable for enhancing PLS at wide angles than the conventional low-luminance cell arrangement.

Iterative block decision feedback equalization with hard-decision feedback (HD-IBDFE) was proposed for single-carrier transmission with frequency-domain equalization (SC-FDE). The detection performance hinges upon not only error propagation, but also the accuracy of estimating the parameters used to re-compute the equalizer coefficients at each iteration. In this paper, we use the erasure zone (EZ) to de-emphasize the feedback values when the hard decisions are not reliable. EZ use also enables a more accurate, and yet computationally more efficient, parameter estimation method than HD-IBDFE. We show that the resulting equalizer coefficients share the same mathematical form as that of the HD-IBDFE, thereby preserving the merit of not requiring matrix inverse operations in calculating the equalizer coefficients. Simulations show that, by using the EZ and the proposed parameter estimation method, a significant performance improvement over the conventional HD-IBDFE can be achieved, but with lower complexity.

In this letter, a method for the construction of polar codes based on the mutual information approximation (MIA) is proposed for the 4Tb/in2 two-dimensional inter-symbol interference (2D-ISI) channels, such as the bit-patterned magnetic recording (BPMR) and two-dimensional magnetic recording (TDMR). The basic idea is to exploit the MIA between the input and output of a 2D detector to establish a log-likelihood ratio (LLR) distribution model based on the MIA results, which compensates the gap caused by the 2D ISI channel. Consequently, the polar codes obtained by the optimization techniques previously developed for the additive white Gaussian noise (AWGN) channels can also have satisfactory performances over 2D-ISI channels. Simulated results show that the proposed polar codes can outperform the polar codes constructed by the traditional methods over 4Tb/in2 2D-ISI channels.

In this paper, we consider interference suppression for a full-duplex (FD) multiuser system based on single-carrier transmission in frequency-selective channels where a FD base-station (BS) simultaneously communicates with half-duplex (HD) uplink and downlink mobile users. We propose a design method for time-domain filtering where the filters in the BS transmitter suppress inter-symbol interference (ISI) and downlink inter-user interference (IUI); those in the BS receiver, self-interference, ISI, and uplink IUI; and those in the downlink mobile users, co-channel interference (CCI) without the channel state information of the CCI channels. Simulation results indicate that the FD system based on the proposed method outperforms the conventional HD system and FD system based on multicarrier transmission.

In this paper, we propose a filter-and-forward relay scheme with energy harvesting for single-carrier transmission in frequency-selective channels. The relay node harvests energy from both the source node transmit signal and its own transmit signal by self-energy recycling. The signal received by the relay node is filtered to suppress the inter-symbol interference and then forwarded to the destination node using the harvested energy. We consider a filter design method based on the signal-to-interference-plus-noise power ratio maximization, subject to a constraint that limits the relay transmit power. In addition, we provide a golden-section search based algorithm to optimize the power splitting ratio of the power splitting protocol. The simulation results show that filtering and self-energy recycling of the proposed scheme are effective in improving performance. It is also shown that the proposed scheme is useful even when only partial channel state information is available.

A class of multimodulus algorithms (MMA(p)) optimized by an optimal step-size (OS) for blind equalization are firstly investigated in this letter. The multimodulus (MM) criterion is essentially a split cost function that separately implements the real and imaginary part of the signal, hence the phase can be recovered jointly with equalization. More importantly, the step-size leading to the minimum of the MM criterion along the search direction can be obtained algebraically among the roots of a higher-order polynomial at each iteration, thus a robust optimal step-size multimodulus algorithm (OS-MMA(p)) is developed. Experimental results demonstrate improved performance of the proposed algorithm in mitigating the inter-symbol interference (ISI) compared with the OS constant modulus algorithm (OS-CMA). Besides, the computational complexity can be reduced by the proposed OS-MMA(2) algorithm.

In this paper, we propose a relaying strategy for single-carrier relay networks with frequency selective channels, where each relay node delays its received signal before amplify-and-forward processing it. We propose a computationally efficient delay design method which reduces the number of delay candidates. To further reduce computational complexity, we develop a simplified delay design method which reduces the number of weight computations. Also, we extend the design method to the case where only partial channel state information of relay-to-destination channels is available. Simulation results show that the proposed relaying strategy outperforms a conventional amplify-and-forward relaying strategy and achieves the performance close to that of a more complex filter-and-forward relaying strategy. It is also shown that the proposed delay design method achieves near-optimum performance.

In this paper, a low complexity hybrid smart antenna system with directional elements and reduced-size digital beamformer is proposed to combat the inter-symbol interference (ISI) problem over frequency-selective fading channel. For the conventional smart antenna system with omni-directional elements, it utilizes the full-size digital beamformer to suppress interference and obtain the optimum performance. However, the proposed hybrid smart antenna system with directional elements can be split the linear array receiver for two branches. One branch is the subarray system with non ISI interference, which can be used for maximum ratio combiner (MRC). Another branch is the reduced-size subarray system with the ISI interference, which can use the reduced-size optimum beamformer to suppress interference. Finally, the output signals of the two branches can be combined to detect the transmitted signals. Simulation results confirm that the proposed low complexity system can provide robust performance under the multipath fading channel.

A differential inter-symbol interference (ISI) cancellation method for time domain synchronous orthogonal frequency division multiplexing (TDS-OFDM) systems is proposed. The differential output of an OFDM system can greatly reduce the impact of ISI in the frequency domain and it constructs a convolutional structure, thus the Viterbi decoding algorithm can be used to recover the transmitted information from the output signal. Simulation results show the effectiveness of the proposed method.

We present an attractive approach for OFDM transmission using an adaptive pre-FFT equalizer, which can select ICI reduction mode according to channel condition, and a degenerated-inverse-matrix-based channel estimator (DIME), which uses a cyclic sinc-function matrix uniquely determined by transmitted subcarriers. In addition to simulation results, the proposed system with an adaptive pre-FFT equalizer and DIME has been laboratory tested by using a software defined radio (SDR)-based test bed. The simulation and experimental results demonstrated that the system at a rate of more than 100 Mbps can provide a bit error rate of less than 10-3 for a fast multi-path fading channel that has a moving velocity of more than 200 km/h with a delay spread of 1.9 µs (a maximum delay path of 7.3 µs) in the 5-GHz band.

In orthogonal frequency division multiplexing (OFDM) system, a guard interval (GI) is used to remove the inter-symbol interference (ISI) due to a multipath channel. It is difficult to set an optimal GI length in the environment whose multipath varies. In this paper, we propose a variable guard interval based on the estimated maximum delay of a multipath channel. The maximum delay is estimated from a channel impulse response (CIR), which is estimated by a preamble symbol. However, since the estimated CIR includes the noise, it is difficult to decide the optimal GI. In order to solve the problem, we introduce the method which selects the path whose signal to noise ratio is high. Additionally, the information of the optimal GI length is required to be transmitted from a receiver to a transmitter. In this paper, we use an acknowledgment (ACK) frame for the feedback of the GI information.

An exact expression of error rate is developed for maximal ratio combining (MRC) in an independent but not necessarily identically distributed frequency selective Nakagami fading channel taking into account inter-symbol, co-channel and adjacent channel interferences (ISI, CCI and ACI respectively). The characteristic function (CF) method is adopted. While accurate analysis of MRC performance cannot be seen in frequency selective channel taking ISI (and CCI) into account, such analysis for ACI has not been addressed yet. The general analysis presented in this paper solves a problem of past and present interest, which has so far been studied either approximately or in simulations. The exact method presented also lets us obtain an approximate error rate expression based on Gaussian approximation (GA) of the interferences. It is shown, especially while the channel is lightly faded, has fewer multipath components and a decaying delay profile, the GA may be substantially inaccurate at high signal-to-noise ratio. However, the exact results also reveal an important finding that there is a range of parameters where the simpler GA is reasonably accurate and hence, we don't have to go for more involved exact expression.

This paper proposes a combination of novel Received Response (RR) sequence at the transmitter and Matched Filter-Equalizer-RAKE (MF-EQZ-RAKE) combining scheme receiver system for Direct Sequence-Ultra Wideband (DS-UWB) multipath channel model. When binary code sequence such as M sequence is used, there is a possibility of generating extra Inter-Symbol Interference (ISI) in the UWB system. Therefore, it is quite a challenging task to collect the energy efficiently although RAKE reception method is applied at the receiver. The main purpose of the proposed system is to overcome the performance degradation for UWB transmission due to the occurrence of Inter-Symbol Interference (ISI) during high speed transmission of ultra short pulses in a multipath channel. The proposed system improves the system performance by improving the RAKE reception performance using RR sequence and suppressing the ISI effect with the equalizer. Simulation results verify that significant improvement can be obtained by the proposed system especially in UWB multipath channel models such as channel CM4 that suffered severe ISI effect.

This paper proposes a combination of adaptive equalizer and Least Mean Square-RAKE (LMS-RAKE) combining scheme receiver system for Direct Sequence-Ultra Wideband (DS-UWB) multipath channel model. The main purpose of the proposed system is to overcome the performance degradation for UWB transmission due to the occurrence of Inter-Symbol Interference (ISI) during high speed transmission of ultra short pulses in a multipath channel. The proposed system improves the system performance by mitigating the multipath effect using LMS-RAKE receiver and suppressing the ISI effect with the adaptive equalizer. Simulation results verify that significant equalization gain can be obtained by the proposed system especially in UWB multipath channel models such as channel CM3 and channel CM4 that suffered severe ISI effect.

Sequences with ear zero correlation zones (EZCZs) are employed to suppress inter-symbol interference (ISI) and inter-user interference (IUI) in wireless communications. Theoretical limits on correlation functions of such sequences are investigated, lower bounds on the relations among length of sequence, width of EZCZs/ELCZs and family size are derived and presented, which play an important role in assessing performance of such sequences.

In this paper, we present a set of sequence pairs which produce zero correlation windows not only in the middle part of the sum of aperiodic correlation functions, but also in the two terminal parts. We name it "Ear Windows." In approximately synchronous CDMA communication system, this set of sequences is able to completely remove the inter-symbol interference (ISI) and multi-user interference (MUI) caused by the multi-path effect if the maximum delay is shorter than the length of the "Ear windows." In addition, it is also feasible in M-ary modulation. The inter-code interference will be mitigated drastically.

This paper proposes an accurate Fast Fourier Transform (FFT) window timing detection method based on the maximum signal-to-interference power ratio (SIR) criterion taking into account the received signal and inter-symbol interference power according to different detected FFT window timings in Orthogonal Frequency and Code Division Multiplexing (OFCDM) wireless access. In the proposed method, the SIR of the received signal is estimated using the desired signal power and inter-symbol interference power calculated based on the power delay profile, which is measured by the cross-correlation between the pilot symbol replica and the received signal. Furthermore, since the SIR is calculated only for the received path timing of the first path and those paths exceeding the guard interval duration, the computational complexity of the proposed method is low. Computer simulation results show that the proposed scheme reduces the required average received signal energy per symbol-to-noise power spectrum density ratio (Es/N0) for achieving the average packet error rate of 10-2 by approximately 1.0 dB compared to the conventional method, which detects the forward path timing of the power delay profile (16QAM data modulation, six-path Rayleigh fading channel, and the maximum delay time of 3 µsec (root mean squared (r.m.s.) delay spread of 0.86 µsec)).

This letter derives and computes the detection probability for timing synchronization in an orthogonal frequency division multiplexing (OFDM) system encountered with a multipath Rayleigh fading channel. OFDM timing synchronization using constant amplitude zero auto-correlation (CAZAC) training symbols and correlation techniques is adopted. With this provision, we focus on the numerical analysis for OFDM timing synchronization scheme employing a preadvancement technique to reduce the inter-symbol interference (ISI). For measuring system performance, the sync detection performance derived in the considered system is presented in a multipath Rayleigh fading channel.

When the multipath delay difference exceeds the guard interval (GI), the performance of MIMO-OFDM transmission suffers severely from both the inter-symbol interference (ISI) from the adjacent OFDM symbols and the inter-carrier interference (ICI) within the same symbol. This paper therefore proposes a MIMO-OFDM receiver employing the low-complexity turbo equalization. The proposed receiver initially separates the data streams and suppresses ICI by linear processing. In the iterative processing, it cancels the other data streams as well as ISI and ICI. The MIMO-OFDM turbo equalizer consists of an ISI canceller, an ICI canceller, an optimal detection filter, and a MAP detector. The proposed receiver can improve the transmission performance by exploiting the log-likelihood ratio that the decoding process produces for canceling both ISI and ICI and separating of the spatially multiplexed streams. Computer simulations, which apply the wireless LAN to MIMO, demonstrate that the proposed receiver can provide excellent performance in the severe multipath channels where the delay difference is greater than GI.

This paper proposes an inter-symbol interference (ISI) suppression scheme using only the even-numbered sub-carriers for the fixed-rate OFDM systems with the 2-dimensional modulation. The proposed scheme is based on the principle that the first half of the waveform in the time domain is the same as the second half when an OFDM symbol is composed of only the even-numbered sub-carriers. The feature of the proposed scheme is that, in the case of the maximum multipath delay beyond the duration of the guard interval, the OFDM symbol with only the even-numbered sub-carriers is transmitted in order to generate the extended virtual guard interval and that the high-level modulation with the sub-carrier power enhancement is applied to achieve the constant data rate. In addition, at the receiver, only the second half of the OFDM symbol is used for the FFT processing to avoid the ISI. Moreover, the condition of the maximum multipath delay is notified to the transmitter by using the feedback channel. Numerical results given by computer simulation showed that the proposed scheme provides far better bit error rate (BER) performance than the traditional OFDM transmission using all sub-carriers under the multipath delay beyond the duration of the guard interval.