In this letter, we study the power control of a cognitive radio (CR) network, where the secondary user (SU) is allowed to share the spectrum with the primary user (PU) only if the signal to interference plus noise ratio (SINR) at the PU is higher than a predetermined level. Both PU fixed power control and PU adaptive power control are considered. Specifically, for the PU adaptive power control, the PU will cooperate with the SU by transmitting with adaptive power. The optimal power control schemes for the SU to maximize the SU throughput under the PU SINR constraint are derived. It is shown that the SU throughput achieved by the optimal power control with the PU adaptive power control is a significant improvement over the optimal power control with the PU fixed power control, especially under high power constraint and low SINR constraint.

Existing filtering methods of TCP ACK packets are known to be effective in reducing the required bandwidth, resulting in the improvement of TCP throughput. However, the methods cannot handle the filtering of piggyback ACK packets. Considering that most TCP applications require bidirectional data exchange, the lack of the functionality to deal with the piggyback ACK packets should be addressed. This paper proposes a novel filtering scheme for WiMAX systems that can handle the piggyback ACK packets. The novelty comes from the fact that the proposed method overlaps the processing time of packet merging with the round trip delay of the bandwidth request-and-grant procedure. It is advantageous because it does not require extra time for the merging. The results from an analytical model and simulations show that the required uplink bandwidth is decreased while the downlink throughput is increased.

This survey summarizes the state-of-the-art research on network coding, mainly focusing on its applications to computer networking. Network coding generalizes traditional store-and-forward routing techniques by allowing intermediate nodes in networks to encode several received packets into a single coded packet before forwarding. Network coding was proposed in 2000, and since then, it has been studied extensively in the field of computer networking. In this survey, we first summarize linear network coding and provide a taxonomy of network coding research, i.e., the network coding design problem and network coding applications. Moreover, the latter is subdivided into throughput/capacity enhancement, robustness enhancement, network tomography, and security. We then discuss the fundamental characteristics of network coding and diverse applications of network coding in details, following the above taxonomy.

This work presents a two-stage ordinal optimization theory-based approach for solving the throughput maximization problems with power constraints of sub-carrier assignment and power allocation in multi-user orthogonal frequency division multiplexing uplink systems. In the first stage, a crude but efficient model is employed to evaluate the performance of a sub-carrier assignment pattern and the genetic algorithm is used to search through the huge solution space. In the second stage, an exact model is employed to evaluate s best sub-carrier assignment patterns obtained in stage 1 and form the select subset. Finally, the best one of the select subset is the good enough solution that we seek. Via numerous tests, this work demonstrates the efficiency of the proposed algorithm and compares it with those of other heuristic methods.

This paper deals with our works on developing a high-throughput wireless LAN using a group layered space-time (GLST) system with low-complexity MIMO decoder. It achieves the throughput of 600 Mbps for 30 meter propagation distance by utilizing 80 MHz bandwidth in the 5 GHz frequency band. Run test under channel model B of IEEE802.11TGn demonstrates its excellent performance. The register transfer level results show that the developed system is synthesized successfully and the prototyping in the target FPGA chips of Stratix II EP2S180F1508C4 gives the expected results.

In this paper, we mathematically derive a matrix-form solution named resource allocation matrix (RAM) for sub-band allocation in an orthogonal frequency division multiple access (OFDMA) system. The proposed scheme is designed to enhance throughput under a strict user fairness condition such that every user has an equal number of sub-bands per frame. The RAM designates the most preferable sub-band for every user. The proposed scheme is evaluated in terms of throughput and user fairness by comparison with the proportional fairness (PF) scheme and greedy scheme. Numerical results show that the proposed scheme has overwhelming superiority to other schemes in terms of fairness and tight competitive in terms of throughput.

We present an orthogonal frequency division multiple access (OFDMA) based multichannel slotted ALOHA for cognitive radio networks (OMSA-CR). The performance of an infinite population based OMSA-CR system is analyzed in terms of channel capacity, throughput, delay, and packet capture effect. We investigate the channel capacity for OMSA-CR with perfect or imperfect spectrum sensing. We introduce the proposed CR MAC based on two channel selection schemes: non-agile channel selection (NCS) and agile channel selection (ACS). Comparing them, we show the tradeoff between complexity and system performance. We verify the proposed CR system model using numerical analysis. In particular, using simulation with a finite populated linear feedback model, we observe the OMSA-CR MAC tradeoff between throughput and minimum delay whose results matched those of the analytical framework. Numerical results for the proposed system throughput are also compared to conventional MACs, including pure ALOHA based CR MAC.

The demand of using applications that assume bidirectional communication such as voice telephony and peer-to-peer using wireless stations has been increasing and especially, the rapid increase of uplink traffic from wireless terminals is expected. However, in uplink WLANs, the hidden-station problem remains to be solved. In this paper, we point out this hidden-station problem and clarify the following unfairness between UDP and TCP uplink flows: 1) the effect of collision caused by hidden-station relationship on throughput and 2) the instability of the throughput depending on the number of hidden stations. To solve these problems, we propose a virtual multi-AP access mechanism. Our mechanism first groups stations according to the hidden-station relationship and type of transport protocol they use then assigns a virtually isolated channel to each group, which enables STAs to communicate as if STAs in different groups are connected to different isolated APs (virtual APs: VAPs). It can mitigate the effect caused by collisions between hidden stations and eliminate the contention between UDP and TCP uplink flows. Its performance is shown through simulation.

Network coding is a promising technique for improving system performance in wireless multihop networks. In this paper, the throughput and fairness in single-relay multi-user wireless networks are evaluated. The carrier sense multiple access with collision avoidance (CSMA/CA) protocol and network coding are used in the medium access control (MAC) sublayer in such networks. The fairness of wireless medium access among stations (STAs), the access point (AP), and the relay station (RS) results in asymmetric bidirectional flows via the RS; as a result the wireless throughput decreases substantially. To overcome this problem, an autonomous optimization of minimum contention window size is developed for CSMA/CA and network coding to assign appropriate transmission opportunities to both the AP and RS. By optimizing the minimum contention window size according to the number of STAs, the wireless throughput in single-relay multi-user networks can be improved and the fairness between bidirectional flows via the RS can be achieved. Numerical analysis and computer simulations enable us to evaluate the performances of CSMA/CA and network coding in single-relay multi-user wireless networks.

In this letter, we propose a novel approximate method for throughput calculation of crossbar switch with buffers only in crosspoints, in the case of uniform traffic. It is an iterative method based on the balance equations that describe crosspoint buffer state. Due to some approximations, we derive very simple formulas suitable for matrix calculation. This method gives results very close to the results obtained by numerous simulations, especially for larger switch and long buffers.

Both multiplexing and multi-user diversity are exploited based on Round Robin (RR) scheduling to achieve tradeoffs between average throughput and fairness in distributed antenna systems (DAS). Firstly, a parallel Round Robin (PRR) scheduling scheme is presented based on the multi-user multiplexing in spatial domain to enhance the throughput, which inherits the excellent fairness performance of RR. Then a parallel grouping Round Robin (PGRR) is proposed to exploit multi-user diversity based on PRR. Due to the integration of multi-user diversity and multi-user multiplexing, a great improvement of throughput is achieved in PGRR. However, the expense of the improvement is at the degradation of fairness since the "best channel criteria" is used in PGRR. Simulations verify analysis conclusions and show that tradeoffs between throughput and fairness can be achieved in PGRR.

From the viewpoint of service availability, which is an important evaluation factor in communication quality, we analytically study the performance improvement of heterogeneous radio networks that cooperatively select one system from among multiple communication systems. It is supposed herein that the heterogeneous network selects one system with the larger throughput or with the smaller time delay. To this end, we firstly derive analytical methods using the probability density function of the performance characteristics of the communication systems consisting of the heterogeneous radio network. The analytical method described here is comparatively general and enables the handling of cases where complete cooperation can and cannot be achieved in the heterogeneous network. As for the performance characteristics, we conduct an experiment using the wireless LAN to establish the probability distribution models of the throughput and time delay in the communication system. Using the analytical method and the experimental model obtained, we calculate the performance improvement by cooperative operation in the heterogeneous network. The equational expression to obtain the theoretical performance improvement limit is also investigated through the analytical equations.

The distribution of streaming multicast and real time audio/video applications in the Internet has been quickly increased in the Internet. Commonly, these applications rarely use congestion control and do not fairly share provided network capacity with TCP-based applications such as HTTP, FTP and emails. Therefore, Internet communities will be threatened by the increase of non-TCP-based applications that likely cause a significant increase of traffics congestion and starvation. This paper proposes a set of mechanisms, such as providing various data rates, background traffics, and various scenarios, to act friendly with TCP when sending multicast traffics. By using 8 scenarios of simulations, we use 6 layered multicast transmissions with background traffic Pareto with the shape factor 1.5 to evaluate performance metrics such as throughput, delay/latency, jitter, TCP friendliness, packet loss ratio, and convergence time. Our study shows that non TCP traffics behave fairly and respectful of the co-existent TCP-based applications that run on shared link transmissions even with background traffic. Another result shows that the simulation has low values on throughput, vary in jitter (0-10 ms), and packet loss ratio > 3%. It was also difficult to reach convergence time quickly when involving only non TCP traffics.

This letter presents a theoretical analysis of the Parallel Iterative Matching (PIM)'s dynamics with multiple iterations used in an input-buffered packet switch. In our approach, by carefully categorizing all unmatched patterns into several representative patterns after each iteration, probabilities of accumulated matched pairs in a recursive manner are successfully obtained. Numerical evaluations of the analytical formulas are performed.

Since the length of wires between different layers, even between the top and bottom layers, is acceptably small in 3D mesh-based NoC (three-Dimensional mesh-based Network on Chip), a structure in which an IP (Intelligence Property) core in a certain layer directly connected to a proper router in another layer may efficiently decrease the average latency of messages and increase the maximum throughput. With this idea, in the paper, we introduce a dual-port access structure, in which each IP core except that in the bottom layer is connected to two routers in two adjacent layers, and, in particular, the IP core in the bottom layer can be directly connected to the proper router in the top layer. Furthermore, we derive the close form expression of the average number of hops of messages and also give the quantitative analysis of the performance when the dual-port access structure is used. All the analytical results reveal that the average number of hops is reduced and the system performance is improved, including a decrease of average latency and an increase of maximum throughput. Finally, the simulation results confirm our theoretical analysis and show the advantage of the proposed dual-port access structure with a relatively small increment of area overhead.

We detail a self synchronous field programmable gate array (SSFPGA) with dual-pipeline (DP) architecture to conceal pre-charge time for dynamic logic, and its throughput optimization by using pipeline alignment implemented on benchmark circuits. A self synchronous LUT (SSLUT) consists of a three input tree-type structure with 8 bits of SRAM for programming. A self synchronous switch box (SSSB) consists of both pass transistors and buffers to route signals, with 12 bits of SRAM. One common block with one SSLUT and one SSSB occupies 2.2 Mλ2 area with 35 bits of SRAM, and the prototype SSFPGA with 3430 (1020) blocks is designed and fabricated using 65 nm CMOS. Measured results show at 1.2 V 430 MHz and 647 MHz operation for a 3 bit ripple carry adder, without and with throughput optimization, respectively. We find that using the proposed pipeline alignment techniques we can perform at maximum throughput of 647 MHz in various benchmarks on the SSFPGA. We demonstrate up to 56.1 times throughput improvement with our pipeline alignment techniques. The pipeline alignment is carried out within the number of logic elements in the array and pipeline buffers in the switching matrix.

We investigated the effect of a high-speed power line communication (PLC) signal induced into a very high-speed digital subscriber line (VDSL) system by conductive coupling based on a network model. Four electronic devices with AC mains and telecommunication ports were modeled using a 4-port network, and the parameters of the network were obtained from measuring impedance and transmission loss. We evaluated the decoupling factor from the mains port to the telecommunication port of a VDSL modem using these parameters for the four electric and electronic devices. The results indicate that the mean value of the decoupling factor for the differential and common mode signals were more than 88 and 62 dB, respectively, in the frequency range of a PLC system. Taking the following parameters into consideration; decoupling factor Ld, the average transmission signal powers of VDSL and PLC, desired and undesired (DU) ratio, and transmission loss of a typical 300-m-long indoor telecommunication line, the VDSL system cannot be disturbed by the PLC signal induced into the VDSL modem from the AC mains port in normal installation.

In this letter, we develop an analytical model for the drive-thru applications based on the IEEE 802.11p WAVE. The model shows that prioritizing the bitrates via the 802.11e EDCA mechanism leads to significant throughput improvement.

This paper illustrates a large-scale MIMO propagation channel measurement in a real life environment and evaluates throughput performance of various MIMO schemes in that environment. For that purpose, 44 MIMO transceivers and a novel spatial scanner are fabricated for wideband MIMO channel measurements in the 5 GHz band. A total of more than 50,000 spatial samples in an area of 150 m2, which includes a bedroom, a Japanese room, a hallway, and the living and dining areas, are taken in a real residential home environment. Statistical properties of the propagation channel and throughput performance of various MIMO schemes are evaluated by using measured data. Propagation measurement results show large dynamic channel variations occurring in a real environment in which statistical properties of the channel, such as frequency correlation and spatial correlation are not stationary any more, and become functions of the SNR. Furthermore, evaluation of throughput shows that although MIMO schemes outperform the SISO system in most areas, open loop systems perform badly in the far areas with low SNR. Paying for the cost of CSI or partial CSI at Tx, closed loop and hybrid systems have superior performance compared to other schemes, especially in reasonable SNR areas ranging from 10 dB to 30 dB. Spatial correlation, which is common in Japanese wooden residences, is also found to be a dominant factor causing throughput degradation of the open loop MIMO schemes.

The Burst ACK scheme enhances effective throughput by reducing ACK overhead when a transmitter sends sequentially multiple data frames to a destination. IEEE 802.11e is one such example. The size of the data frame body and the number of burst data frames are important burst transmission parameters that affect throughput. The larger the burst transmission parameters are, the better the throughput under error-free conditions becomes. However, large data frame could reduce throughput under error-prone conditions caused by signal-to-noise ratio (SNR) deterioration. If the throughput can be calculated from the burst transmission parameters and error rate, the appropriate ranges of the burst transmission parameters could be narrowed down, and the necessary buffer size for storing transmit data or received data temporarily could be estimated. In this paper, we present a method that features a simple algorithm for estimating the effective throughput from the burst transmission parameters and error rate. The calculated throughput values agree well with the measured ones for actual wireless boards based on the IEEE 802.11-based original MAC protocol. We also calculate throughput values for larger values of the burst transmission parameters outside the assignable values of the wireless boards and find the appropriate values of the burst transmission parameters.