Recently, broadband wireless communication has been significantly enhanced; thus, frequency spectrum scarcity has become an extremely serious problem. Spatial frequency reuse based on spectrum databases has attracted significant attention. The spectrum database collects wireless environment information, such as the radio signal strength indicator (RSSI), estimates the propagation coefficient for the propagation loss and shadow effect, and finds a vacant area where the secondary system uses the frequency spectrum without harmful interference to the primary system. Wireless sensor networks are required to collect the RSSI from a radio environmental monitor. However, a large number of RSSI values should be gathered because numerous sensors are spread over the wireless environment. In this study, a data compression technique based on spatial features, such as buildings and houses, is proposed. Using computer simulation and experimental evaluation, we confirm that the proposed compression method successfully reduces the size of the RSSI and restores the original RSSI in the recovery process.

The Dynamic Spectrum Sharing (DSS) system, which uses the frequency band allocated to incumbent systems (i.e., primary users) has attracted attention to expand the available bandwidth of the fifth-generation mobile communication (5G) systems in the sub-6GHz band. In Japan, a DSS system in the 2.3GHz band, in which the ARIB STD-B57-based Field Pickup Unit (FPU) is assigned as an incumbent system, has been studied for the secondary use of 5G systems. In this case, the incumbent FPU is a mobile system, and thus, the DSS system needs to use not only a spectrum sharing database but also radio sensors to detect primary signals with high accuracy, protect the primary system from interference, and achieve more secure spectrum sharing. This paper proposes highly efficient sensing methods for detecting the ARIB STD-B57-based FPU signals in the 2.3GHz band. The proposed methods can be applied to two types of the FPU signal; those that apply the Continuous Pilot (CP) mode pilot and the Scattered Pilot (SP) mode pilot. Moreover, we apply a sample addition method and a symbol addition method for improving the detection performance. Even in the 3GPP EVA channel environment, the proposed method can, with a probability of more than 99%, detect the FPU signal with an SNR of -10dB. In addition, we propose a quantized reference signal for reducing the implementation complexity of the complex cross-correlation circuit. The proposed reference signal can reduce the number of quantization bits of the reference signal to 2 bits for in-phase and 3 bits for orthogonal components.

Time of arrival (TOA) is a widely used wireless cellular network ranging technology. How to perform accurate TOA estimation in multi-path and non-line-of-sight (NLOS) environments and then accurately calculating mobile terminal locations are two critical issues in positioning research. NLOS identification can be performed in the TOA measurement part and the position calculation part. In this paper, for the above two steps, two schemes for mitigating NLOS errors are proposed. First, a TOA ranging method based on clustering theory is proposed to solve the problem of line-of-sight (LOS) path estimation in multi-path channels. We model the TOA range as a Gaussian mixture model and illustrate how LOS and NLOS can be measured and identified based on non-parametric Bayesian methods when the wireless transmission environment is unknown. Moreover, for NLOS propagation channels, this paper proposes a user location estimator based on the maximum a posteriori criterion. Combined with the TOA estimation and user location computation scheme proposed in this paper, the terminal's positioning accuracy is improved. Experiments showed that the TOA measurement and localization algorithms presented in this paper have good robustness in complex wireless environments.

This paper proposes new acoustic feature signatures based on the multiscale fractal dimension (MFD), which are robust against the diversity of environmental sounds, for the content-based similarity search. The diversity of sound sources and acoustic compositions is a typical feature of environmental sounds. Several acoustic features have been proposed for environmental sounds. Among them is the widely-used Mel-Frequency Cepstral Coefficients (MFCCs), which describes frequency-domain features. However, in addition to these features in the frequency domain, environmental sounds have other important features in the time domain with various time scales. In our previous paper, we proposed enhanced multiscale fractal dimension signature (EMFD) for environmental sounds. This paper extends EMFD by using the kernel density estimation method, which results in better performance of the similarity search tasks. Furthermore, it newly proposes another acoustic feature signature based on MFD, namely very-long-range multiscale fractal dimension signature (MFD-VL). The MFD-VL signature describes several features of the time-varying envelope for long periods of time. The MFD-VL signature has stability and robustness against background noise and small fluctuations in the parameters of sound sources, which are produced in field recordings. We discuss the effectiveness of these signatures in the similarity sound search by comparing with acoustic features proposed in the DCASE 2018 challenges. Due to the unique descriptiveness of our proposed signatures, we confirmed the signatures are effective when they are used with other acoustic features.

A method for detecting the timing of photodiode (PD) saturation without using an in-pixel time-to-digital converter (TDC) is proposed. Detecting PD saturation time is an approach to extend the dynamic range of a CMOS image sensor (CIS) without multiple exposures. In addition to accumulated charges in a PD, PD saturation time can be used as a signal related to light intensity. However, in previously reported CISs with detecting PD saturation time, an in-pixel TDC is used to detect and store PD saturation time. That makes the resolution of a CIS lower because an in-pixel TDC requires a large area. As for the proposed pixel circuit, PD saturation time is detected and stored as a voltage in a capacitor. The voltage is read and converted to a digital code by a column ADC after an exposure. As a result, an in-pixel TDC is not required. A signal-processing and calibration method for combining two signals, which are saturation time and accumulated charges, linearly are also proposed. Circuit simulations confirmed that the proposed method extends the dynamic range by 36 dB and its total dynamic range to 95 dB. Effectiveness of the calibration was also confirmed through circuit simulations.

In this paper, we present the transmission characteristics control of a 125 GHz-band split-ring resonator (SRR) bandstop filter by coupling an alignment-free lattice pattern. We demonstrate that the transmission characteristics of the SRR filter can be controlled by coupling the lattice pattern; however, the required accuracy of alignment between the SRR filter and lattice pattern was below 200 µm. Therefore, we designed an alignment-free lattice pattern whose unit cell size is different from that of the SRR unit cell. S21 of the SRR bandstop filter changes from -38.7 to -4.0 dB at 125 GHz by arranging the alignment-free lattice pattern in close proximity to the SRR stopband filter without alignment. A 10 Gbit/s data transmission can be achieved over a 125 GHz-band wireless link by setting the alignment-free lattice pattern substrate just above the SRR bandstop filter.

In this paper, the uplink performance of Multi-User Multiple Input Multiple Output (MU-MIMO) Zero Forcing (ZF) receiver is investigated over correlated Rayleigh fading channels with channel estimation error. A mathematical expression for the sub-streams' output Signal to Noise Ratio (SNR) with transmit and receive-correlation is derived in the presence of erroneous channel estimates. Besides, an approximate and accurate expression for the Bit Error Rate (BER) of ZF receiver for 16-Quadrature Amplitude Modulation (QAM) with transmit-correlation is deduced in terms of the hypergeometric function. Subsequently, the developed analytical BER is verified by Monte-Carlo trails accounting various system parameters. The simulation results indicate that ZF receiver's BER relies solely on the transmit-correlation for the same number of transmit and receive-antennas at higher average SNR values per transmitted symbol (Es/N0). Also, a logarithmic and exponential growth in the BER is observed with an increase in the Mean Square estimation Error (MSE) and correlation coefficient, respectively.

Linear programming (LP) decoding based on the alternating direction method of multipliers (ADMM) has proved to be effective for low-density parity-check (LDPC) codes. However, for high-density parity-check (HDPC) codes, the ADMM-LP decoder encounters two problems, namely a high-density check matrix in HDPC codes and a great number of pseudocodewords in HDPC codes' fundamental polytope. The former problem makes the check polytope projection extremely complex, and the latter one leads to poor frame error rates (FER) performance. To address these issues, we introduce the even vertex algorithm (EVA) into the ADMM-LP decoding algorithm for HDPC codes, named as HDPC-EVA. HDPC-EVA can reduce the complexity of the projection process and improve the FER performance. We further enhance the proposed decoder by the automorphism groups of codes, creating diversity in the parity-check matrix. The simulation results show that the proposed decoder is capable of cutting down the average decoding time for each iteration by 30%-60%, as well as achieving near maximum likelihood (ML) performance on some BCH codes.

In this paper, we demonstrate that a formal approach is effective for improving reliability of cooperative robot designs, where the control logics are expressed in concurrent FSMs (Finite State Machines), especially in accordance with the standard FSM4RTC (FSM for Robotic Technology Components), by a case study of cooperative transport robots. In the case study, FSMs are modeled in the formal specification language CSP (Communicating Sequential Processes) and checked by the model-checking tool FDR, where we show techniques for modeling and verification of cooperative robots implemented with the help of the RTM (Robotic Technology Middleware).

Long-range radars (LRRs) for higher level autonomous driving (AD) will require more antennas than simple driving assistance. The point at issue here is 50-60% of the LRR module area is used for antennas. To miniaturize LRR modules, we use horn and lens antenna with highly efficient gain. In this paper, we propose two high-density implementation techniques for radio-frequency (RF) front-end using horn and lens antennas. In the first technique, the gap between antennas was eliminated by taking advantage of the high isolation performance of horn and lens antennas. In the second technique, the RF front-end including micro-strip-lines, monolithic microwave integrated circuits, and peripheral parts is placed in the valley area of each horn. We fabricated a prototype LRR operating at 77 GHz with only one printed circuit board (PCB). To detect vehicles horizontally and vertically, this LRR has a minimum antenna configuration of one Tx antenna and four Rx antennas placed in 2×2 array, and 30 mm thickness. Evaluation results revealed that vehicles could be detected up to 320 m away and that the horizontal and vertical angle error was less than +/- 0.2 degrees, which is equivalent to the vehicle width over 280 m. Thus, horn and lens antennas implemented using the proposed techniques are very suitable for higher level AD LRRs.

Service composition optimization is a classic NP-hard problem. How to quickly select high-quality services that meet user needs from a large number of candidate services is a hot topic in cloud service composition research. An efficient second-order beetle swarm optimization is proposed with a global search ability to solve the problem of cloud service composition optimization in this study. First, the beetle antennae search algorithm is introduced into the modified particle swarm optimization algorithm, initialize the population bying using a chaotic sequence, and the modified nonlinear dynamic trigonometric learning factors are adopted to control the expanding capacity of particles and global convergence capability. Second, modified secondary oscillation factors are incorporated, increasing the search precision of the algorithm and global searching ability. An adaptive step adjustment is utilized to improve the stability of the algorithm. Experimental results founded on a real data set indicated that the proposed global optimization algorithm can solve web service composition optimization problems in a cloud environment. It exhibits excellent global searching ability, has comparatively fast convergence speed, favorable stability, and requires less time cost.

To realize an information-centric networking, IPFS (InterPlanetary File System) generates a unique ContentID for each content by applying a cryptographic hash to the content itself. Although it could improve the security against attacks such as falsification, it makes difficult to realize a similarity search in the framework of IPFS, since the similarity of contents is not reflected in the proximity of ContentIDs. To overcome this issue, we propose a method to apply a locality sensitive hash (LSH) to feature vectors extracted from contents as the key of indexes stored in IPFS. By conducting experiments with 10,000 random points corresponding to stored contents, we found that more than half of randomly given queries return a non-empty result for the similarity search, and yield an accurate result which is outside the σ confidence interval of an ordinary flooding-based method. Note that such a collection of random points corresponds to the worst case scenario for the proposed scheme since the performance of similarity search could improve when points and queries follow an uneven distribution.

Heterogeneous networks (HetNets) are emerging as an inevitable method to tackle the capacity crunch of the cellular networks. Due to the complicated network environment and a large number of configured parameters, coverage and capacity optimization (CCO) is a challenging issue in heterogeneous cellular networks. By combining the self-optimizing algorithm for radio frequency (RF) parameters with the power control mechanism of small cells, the CCO problem of self-organizing network is addressed in this paper. First, the optimization of RF parameters is solved based on reinforcement learning (RL), where the base station is modeled as an agent that can learn effective strategies to control the tunable parameters by interacting with the surrounding environment. Second, the small cell can autonomously change the state of wireless transmission by comparing its distance from the user equipment with the virtual cell size. Simulation results show that the proposed algorithm can achieve better performance on user throughput compared to different conventional methods.

This paper proposes relay selection techniques for XOR physical layer network coding with MMSE based non-linear precoding in MIMO bi-directional wireless relaying networks. The proposed selection techniques are derived on the different assumption about characteristics of the MMSE based non-linear precoding in the wireless network. We show that the signal to noise power ratio (SNR) is dependent on the product of all the eigenvalues in the channels from the terminals to relays. This paper shows that the best selection techniques in all the proposed techniques is to select a group of the relays that maximizes the product. Therefore, the selection technique is called “product of all eigenvalues (PAE)” in this paper. The performance of the proposed relay selection techniques is evaluated in a MIMO bi-directional wireless relaying network where two terminals with 2 antennas exchange their information via relays. When the PAE is applied to select a group of the 2 relays out of the 10 relays where an antenna is placed, the PAE attains a gain of more than 13dB at the BER of 10-3.

In this paper, the world's first experimental evaluation of the Wi-SUN Japan Utility Telemetering Association (JUTA) profile-compliant feathery receiver-initiated transmission (JUTA F-RIT) protocol is conducted. Firstly, the transmission success rate in an interference environment is evaluated by theoretical analysis and computer simulations. The analysis is derived from the interference model focusing on the carrier sense. The analysis and simulation results agree as regards the transmission success rate of the JUTA F-RIT protocol. Secondly, we develop the dongle-type prototype that hosts the JUTA F-RIT protocol. Measurement results in a cochannel interference environment show that the transmission success rate at the lower MAC layer is around 94% when the number of terminals is 20. When the waiting time for the establishment of the communication link can be extended to exceed 10 s, the JUTA F-RIT protocol can achieve the transmission success rate of over 90% without the re-establishment of the communication link and re-transmission of data frames. Moreover, the experimental results are examined from two viewpoints of the performance of the frame transmissions and the timeout incident, and the feature of the JUTA F-RIT protocol are discussed.

For improving the fifth-generation mobile communication system, a highly efficient power amplifier must be designed for the base station. An outphasing amplifier is expected to be a solution for achieving high efficiency. We designed a combiner, one of the key components of the outphasing amplifier, using a serial Chireix combiner and fabricated an amplifier with a GaN HEMT, achieving 70% or more high efficiency up to 9 dB back-off power in an 800 MHz band. We also fabricated a 2 GHz-band outphasing amplifier with the same design. We applied digital predistortion (DPD) to control the balance of amplifying units in this amplifier and achieved an average efficiency of 65% under a 20 MHz modulation bandwidth.

This paper presents recent progress on high frequency and wide bandwidth GaN high power amplifiers (PAs) that are usable for high-data-rate wireless communications and modern radar systems. The key devices and design techniques for PA are described in this paper. The results of the state-of-the art GaN PAs for microwave to millimeter-wave applications and design methodology for ultra-wideband GaN PAs are shown. In order to realize high output power density, InAlGaN/GaN HEMTs were employed. An output power density of 14.8 W/mm in S-band was achieved which is 1.5 times higher than that of the conventional AlGaN/GaN HEMTs. This technique was applied to the millimeter-wave GaN PAs, and a measured power density at 96 GHz was 3 W/mm. The modified Angelov model was employed for a millimeter-wave design. W-band GaN MMIC achieved the maximum Pout of 1.15 W under CW operation. The PA with Lange coupler achieved 2.6 W at 94 GHz. The authors also developed a wideband PA. A power combiner with an impedance transformation function based on the transmission line transformer (TLT) technique was adopted for the wideband PA design. The fabricated PA exhibited an average Pout of 233 W, an average PAE of 42 %, in the frequency range of 0.5 GHz to 2.1 GHz.

A practical Doherty amplifier design method has been developed based on an asymmetric configuration scheme. By embedding a load modulation function into matching circuits of a carrier amplifier (CA) and a peaking amplifier (PA) in the Doherty amplifier, an issue of the Doherty amplifier design is boiled down to the CA and PA matching circuit design. The method can be applied to transistors with unknown parasitic elements if optimum termination impedance conditions for the transistor are obtained from a source-/load-pull technique in simulation or measurement. The design method was applied to GaN HEMT Doherty amplifier MMICs. The fabricated 4.5-GHz-band GaN HEMT Doherty amplifier MMIC exhibited a maximum drain efficiency of 66% and a maximum power-added efficiency (PAE) of 62% at 4.1GHz, with a saturation output power of 36dBm. In addition, PAE of 50% was achieved at 4.1GHz on a 7.2-dB output back-off (OBO) condition. The fabricated 8.5-GHz-band GaN HEMT Doherty amplifier MMIC exhibited a maximum drain efficiency of 53% and a maximum PAE of 44% at 8.6GHz, with a saturation output power of 36dBm. In addition, PAE of 35% was achieved at 8.6GHz on a 6.7-dB (OBO). And, the fabricated 12-GHz-band GaN HEMT Doherty amplifier MMIC exhibited a maximum drain efficiency of 57% and a maximum PAE of 52% at 12.4GHz, with a saturation output power of 34dBm. In addition, PAE of 32% was achieved at 12.4GHz on a 9.5-dB (OBO) condition.

With the advent of 5G and external pressure to reduce greenhouse gas emissions, wireless transceivers with low power consumption are strongly desired for future cellular systems. At the same time, increased modulation order due to the evolution of cellular systems will force power amplifiers to operate at much larger output power back-off to prevent EVM degradation. This paper begins with an analysis of load modulation and asymmetrical Doherty amplifiers. Measurement results will show an apparent 60% efficiency plateau for modulated signals with a large peak-to-average power ratio (PAPR). To exceed this efficiency limitation, the second part of this paper focuses on a new amplification topology based on the amalgamation between Doherty and outphasing. Measurement results of the proposed Doherty-outphasing power amplifier (DOPA) will confirm the feasibility of the approach with a modulated efficiency greater than 70% measured at 10 dB output power back-off.

The Fifth-Generation new radio (5G NR) services that started in 2020 in Japan use a higher peak-to-average power ratio (PAPR) of a modulated signal with a maximum bandwidth of up to 100MHz and support multi-input/multi-output (MIMO) systems even in mobile handsets, compared to the Third-Generation (3G) and/or Fourth-Generation (4G) handsets. The 5G NR requires wideband operation for power amplifiers (PAs) used in handsets under a high PAPR signal condition. The 5G NR also requires a number of operating bands for the handsets. These requirements often cause significand degradation of the PA efficiency, consequently. The degradation is due to wideband and/or high PAPR operation as well as additional front-end loss between a PA and an antenna. Thus, the use of an efficiency enhancement technique is indispensable to 5G NR handset PAs. An envelope tracking (ET) is one of the most effective ways to improve the PA efficiency in the handsets. This paper gives recent progress in ET power amplifiers (ETPAs) followed by a brief introduction of ET techniques. The introduction describes a basic operation for an ET modulator that is a key component in the ET techniques and then gives a description of some kinds of ET modulators. In addition, as an example of a 5G NR ETPA, the latest experimental results for a 5G ETPA prototype are demonstrated while comparing overall efficiency of the ET modulator and PA in the ET mode with that in the average power tracking (APT) mode.