Controlling fluid simulation is one of the important research topics in computer graphics. In this paper, we focus on controlling the simulation of cumuliform cloud formation. Using a previously proposed method for controlling cloud simulation the convergence speed is very slow; therefore, it takes a long time before the clouds form the desired shapes. We improved the method and accelerated the convergence by introducing a new mechanism for controlling the amount of water vapor added. We demonstrate the effectiveness of the proposed method by several examples.

Due to its on-demand and pay-as-you-go properties, cloud computing has become an attractive alternative for HPC applications. However, communication-intensive applications with complex communication patterns still cannot be performed efficiently on cloud platforms, which are equipped with MapReduce technologies, such as Hadoop and Spark. In particular, one major obstacle is that MapReduce's simple programming model cannot explicitly manipulate data transfers between compute nodes. Another obstacle is cloud's relatively poor network performance compared with traditional HPC platforms. The traditional Strassen's algorithm of square matrix multiplication has a recursive and complex pattern on the HPC platform. Therefore, it cannot be directly applied to the cloud platform. In this paper, we demonstrate how to make Strassen's algorithm with complex communication patterns “cloud-friendly”. By reorganizing Strassen's algorithm in an iterative pattern, we completely separate its computations and communications, making it fit to MapReduce programming model. By adopting a novel data/task parallel strategy, we solve Strassen's data dependency problems, making it well balanced. This is the first instance of Strassen's algorithm in MapReduce-style systems, which also matches Strassen's communication lower bound. Further experimental results show that it achieves a speedup ranging from 1.03× to 2.50× over the classical Θ(n3) algorithm. We believe the principle can be applied to many other complex scientific applications.

Mobile virtual network operators (MVNOs) are mobile operators without their own infrastructure or government issued spectrum licenses. They purchase spectrum resources from primary mobile network operators (MNOs) to provide communication services under their own brands. MVNOs are expected to play an important role in mobile network markets, as this will increase the competition in retail markets and help to meet the demand of niche markets. However, with the rapidly increasing demand of mobile data traffic, efficient utilization of the limited spectrum resources owned by MVNOs has become an important issue. We propose here a resource sharing mechanism between MVNOs against the background of network functions virtualization (NFV). The proposed mechanism enables MVNOs to improve their quality of service (QoS) by sharing spectrum resources with each other. A nash bargaining solution based decision strategy is also devised to ensure the fairness of resource sharing. Extensive numerical evaluation results validate the effectiveness of the proposed models and mechanisms.

The pilot symbols in the broadband Air-to-Ground (A/G) communications system, e.g., L-band Digital Aeronautical Communications System (L-DACS1), are expected to be also utilized for navigation. In order to identify the co-channel signals from different Ground Stations (GSs), the N-Shift Zero Correlation Zone (NS-ZCZ) sequences are employed for pilot sequences. The ideal correlation property of the proposed pilot sequence in ZCZ can maintain the signal with less co-channel interference. The simulation confirms that the more co-channel GSs are employed, the higher navigation accuracy can be achieved.

An effective time-step control method is proposed for the damped pseudo-transient analysis (DPTA). This method is based on the idea of the switched evolution/relaxation method which can automatically adapt the step size for different circuit states. Considering the number of iterations needed for the convergence of the Newton-Raphson method, the new method adapts the suitable time-step size with the status of previous steps. By numerical examples, it is proved that this method can improve the simulation efficiency and convergence for the DPTA method to solve nonlinear DC circuits.

A field multiplication in the extended binary field is often expressed using Toeplitz matrix-vector products (TMVPs), whose matrices have special properties such as symmetric or triangular. We show that such TMVPs can be efficiently implemented by taking advantage of some properties of matrices. This yields an efficient multiplier when a field multiplication involves such TMVPs. For example, we propose an efficient multiplier based on the Dickson basis which requires the reduced number of XOR gates by an average of 34% compared with previously known results.

New classes of zero-difference balanced (ZDB) functions derived from Fermat quotients are proposed in this letter. Based on the new ZDB functions, some applications, such as the construction of optimal frequency hopping sequences set and perfect difference systems of sets, are introduced.

When there are multiple component predictors, it is promising to integrate them into one predictor for advanced reasoning. If each component predictor is given as a stochastic model in the form of probability distribution, an exponential mixture of the component probability distributions provides a good way to integrate them. However, weight parameters used in the exponential mixture model are difficult to estimate if there is no training samples for performance evaluation. As a suboptimal way to solve this problem, weight parameters may be estimated so that the exponential mixture model should be a balance point that is defined as an equilibrium point with respect to the distance from/to all component probability distributions. In this paper, we propose a weight parameter estimation method that represents this concept using a symmetric Kullback-Leibler divergence and generalize this method.

With the growth of cloud-based services, cloud data centers are experiencing large growth. A key component in a cloud data center is the network technology deployed. In particular, Ethernet technology, commonly deployed in cloud data centers, is already envisioned for 10 Tbps Ethernet. In this paper, we study and analyze the makespan, workload execution times, and virtual machine migrations as the network speed increases. In particular, we consider homogeneous and heterogeneous data centers, virtual machine scheduling algorithms, and workload scheduling algorithms. Results obtained from our study indicate that the increase in a network's speed reduces makespan and workloads execution times, while aiding in the increase of the number of virtual machine migrations. We further observed that the number of migrations' behaviors in relation to the speed of the networks also depends on the employed virtual machines scheduling algorithm.

In a multi-tenant data center, nodes and links of tenants' virtual networks (VNs) share a single component of the physical substrate network (SN). The failure of a single SN component can thereby cause the simultaneous failures of multiple nodes and links in a single VN; this complex of failures must significantly disrupt the services offered on the VN. In the present paper, we clarify how the fault tolerance of each VN is affected by a single SN failure, especially from the perspective of VN allocation in the SN. We propose a VN allocation model for multi-tenant data centers and formulate a problem that deals with the bandwidth loss in a single VN due a single SN failure. We conduct numerical simulations (with the setting that has 1.7×108bit/s bandwidth demand on each VN, (denoted by Ci)). When each node in each VN is scattered and mapped to an individual physical server, each VN can have the minimum bandwidth loss (5.3×102bit/s (3.0×10-6×Ci)) but the maximum required bandwidth between physical servers (1.0×109bit/s (5.7×Ci)). The balance between the bandwidth loss and the required physical resources can be optimized by assigning every four nodes of each VN to an individual physical server, meaning that we minimize the bandwidth loss without over-provisioning of core switches.

Router virtualization is becoming more common as a method that uses network (NW) equipment effectively and robustly similar to server virtualization. Edge routers, which are gateways of core NWs, should be virtualized because they have many functions and resources just as servers do. To virtualize edge routers, a metro NW, which is a wide area layer-2 NW connecting each user's residential gateway to edge routers, must trace dynamic edge router re-allocation by changing the route of each Ethernet flow. Therefore, we propose a scalable centralized control architecture of a virtual layer-2 switch on a metro NW to trace virtual router re-allocation and use metro NW equipment effectively. The proposed scalable control architecture improves the centralized route control performance by processing in parallel on a flow-by-flow basis taking into account route information even in the worst case where edge routers fail. In addition, the architecture can equalize the load among parallel processes dynamically by using two proposed load re-allocation methods to increase the route control performance stably while minimizing the amount of resources for the control. We evaluate the scalability of the proposed architecture through theoretical analysis and experiments on a prototype and show that the proposed architecture increases the number of flows accommodated in a metro NW. Moreover, we evaluate the load re-allocation methods through simulation and show that they can evenly distribute the load among parallel processes. Finally, we show that the proposed architecture can be applied to not only large-scale metro NWs but also to data center NWs, which have recently become an important type of large-scale layer-2 NW.

High gain extinction ratio and stable control of the phase in phase sensitive amplification are fundamental to realize either phase regeneration or quadrature squeezing of phase modulated signals in an efficient and robust manner. In this paper, we show that a combination of our previously demonstrated “sideband-assisted” dual-pump phase sensitive amplifier with a gain extinction ratio of more than 25dB, and a phase-locked loop based stabilization technique, enable efficient QPSK quadrature squeezing. Its stable operation is exploited to realize phase de-multiplexing of QPSK signals into BPSK tributaries. The phase de-multiplexed signals are evaluated through measurement of constellation diagrams, eye diagrams and more importantly, BER curves. The de-multiplexed BPSK signals exhibited an OSNR penalty of less than 1dB compared to the back-to-back BPSK signals.

In this paper, we propose a novel Autonomous Decentralized Control (ADC) scheme for indirectly controlling a system performance variable of large-scale and wide-area networks. In a large-scale and wide-area network, since it is impractical for any one node to gather full information of the entire network, network control must be realized by inter-node collaboration using information local to each node. Several critical network problems (e.g., resource allocation) are often formulated by a system performance variable that is an amount to quantify system state. We solve such problems by designing an autonomous node action that indirectly controls, via the Markov Chain Monte Carlo method, the probability distribution of a system performance variable by using only local information. Analyses based on statistical mechanics confirm the effectiveness of the proposed node action. Moreover, the proposal is used to implement traffic-aware virtual machine placement control with load balancing in a data center network. Simulations confirm that it can control the system performance variable and is robust against system fluctuations. A comparison against a centralized control scheme verifies the superiority of the proposal.

New payment technologies are coming that will raise user convenience. To support automatic hands-free payment, merchant devices will collect customer's information from the cloud of payment service providers or customer's smart phones, which should be removed after the transaction. Using Jaccard containment, we propose a proactive security approach of cleaning personal data at merchant-side point-of-sale terminals. We also propose a sampling method to reduce communication overhead by several orders of magnitude.

This paper proposes a new method that combines signal modulation and FDTD (Finite-Difference Time-Domain) simulations to reduce the computation time in multiple-antenna analysis. In this method, signals are modulated so as to maintain orthogonality among the excited signals; multiple antennas are excited at the same time. This means just one FDTD simulation is needed whereas the conventional method demands as many simulations as there are transmitting antennas. The simulation of a 2×2 multi-antenna system shows that the proposed method matches the performance of the conventional method even though its computation time is much shorter.

A low-complexity time-frequency multiplex estimator and low-complexity equalizer transceiver design are proposed to combat the problems of RF impairment associated with zero-IF transceiver of multi-carrier systems. Moreover, the proposed preambles can estimate the transmitter (TX) in-phase and quadrature-phase (IQ) imbalance, carrier frequency offset (CFO), and channel impulse response parameters. The proposed system has two parts. First, all parameters of the impairments are estimated by the designed time-frequency multiplex estimator. Second, the estimated parameters are used to compensate the above problems and detect the transmitted signal with low complexity. Simulation results confirm that the proposed estimator performs reliably with respect to IQ imbalance, CFO, and multipath fading channel effects.

An 8-Mbit 0.18-µm CMOS 1T1C ferroelectric RAM (FeRAM) in a planar ferroelectric technology was developed. Even though the cell area of 2.48 µm2 is almost equal to that of a 4-Mbit stacked-capacitor FeRAM (STACK FeRAM) 2.32 µm2[1], the chip size of the developed 8-Mbit FeRAM, including extra 2-Mbit parities for the error correction code (ECC), is just 52.37 mm2, which is about 30% smaller than twice of the 4-Mbit STACK FeRAM device, 37.68mm2×2[1]. This excellent characteristic can be attributed to the large cell matrix architectures of the sectional cyclic word line (WL) that was used to increase the column numbers, and to the 1T1C bit-line GND level sensing (BGS)[2][3] circuit design intended to sense bit lines (BL) that have bit cells 1K long and a large capacitance. An access time of 52 ns and a cycle time of 77 ns in RT at a VDD of 1.8 V were achieved.

Most error correction interfaces for speech recognition applications on smartphones require the user to first mark an error region and choose the correct word from a candidate list. We propose a simple multimodal interface to make the process more efficient. We develop Long Context Match (LCM) to get candidates that complement the conventional word confusion network (WCN). Assuming that not only the preceding words but also the succeeding words of the error region are validated by users, we use such contexts to search higher-order n-grams corpora for matching word sequences. For this purpose, we also utilize the Web text data. Furthermore, we propose a combination of LCM and WCN (“LCM + WCN”) to provide users with candidate lists that are more relevant than those yielded by WCN alone. We compare our interface with the WCN-based interface on the Corpus of Spontaneous Japanese (CSJ). Our proposed “LCM + WCN” method improved the 1-best accuracy by 23%, improved the Mean Reciprocal Rank (MRR) by 28%, and our interface reduced the user's load by 12%.

Middle-level parts have attracted great attention in the computer vision community, acting as discriminative elements for objects. In this paper we propose an unsupervised approach to mine discriminative parts for object detection. This work features three aspects. First, we introduce an unsupervised, exemplar-based training process for part detection. We generate initial parts by selective search and then train part detectors by exemplar SVM. Second, a part selection model based on consistency and distinctiveness is constructed to select effective parts from the candidate pool. Third, we combine discriminative part mining with the deformable part model (DPM) for object detection. The proposed method is evaluated on the PASCAL VOC2007 and VOC2010 datasets. The experimental results demons-trate the effectiveness of our method for object detection.

It is commonly believed that improved interaction between humans and electronic device, it is effective to draw the viewer's attention to a particular object. Augmented reality (AR) applications can call attention to real objects by overlaying highlight effects or visual stimuli (such as arrows) on a physical scene. Sometimes, more subtle effects would be desirable, in which case it would be necessary to smoothly and naturally guide the user's gaze without external stimuli. Here, a novel image modification method is proposed for directing a viewer's gaze to specific regions of interest. The proposed method uses saliency analysis and color modulation to create modified images in which the region of interest is the most salient region in the entire image. The proposed saliency map model that is used during saliency analysis reduces computational costs and improves the naturalness of the image using the LAB color space and simplified normalization. During color modulation, the modulation value of each LAB component is determined in order to consider the relationship between the LAB components and the saliency value. With the image obtained in this manner, the viewer's attention is smoothly attracted to a specific region very naturally. Gaze measurements as well as a subjective experiments were conducted to prove the effectiveness of the proposed method. These results show that a viewer's visual attention is indeed attracted toward the specified region without any sense of discomfort or disruption when the proposed method is used.