In the future satellite broadcasting system in 21GHz band, the rainfall attenuation is a most significant problem. To solve this problem, the hierarchical transmission systems have been studied. This paper analyzes the performance of the hierarchical modulation scheme from the view point of power assignment in the presence of the rainfall attenuation. This paper shows an optimum power assignment ratio to maximize the spectral efficiency and the signal-to-noise ratio of received image, and these optimum ratio is varied with the measure of system performance.

A new rate-controlled queueing discipline, called virtual rate-based queueing (VRBQ), is proposed for packet-switching nodes in connection-oriented, high-speed, wide-area networks. The VRBQ discipline is based on the virtual rate which has a value between the average and peak transmission rates. By choosing appropriate virtual rates, various requirements can be met regarding the performance and quality of services in integrated-service networks. As the worst-case performance guarantee, we determine the upper bounds of queueing delay when VRBQ is combined with an admission control mechanism, i.e., Dynamic Time Windows or Leaky Bucket. Simulation results demonstrate the fairness policy of VRBQ in comparison with other queueing disciplines, and the performance of sources controlled under different virtual rates.

In the modern hospital, the physical or chemical therapeutic procedure is regarded as paramount and psychological or spiritual care is quite frequently put aside. The goal of the Hyper Hospital" is to correct this. The Hyper Hospital is constructed in the computer based electronic network using an alternate reality system, such as the virtual reality system, as the human-machine-human interface. The nodes of the Hyper Hospital belong to a patient and also to a variety of medical care facilities; for example, the out patient office, the nursing care center, the medical examination unit, the operating theater, etc. The Hyper Hospital space consists of various kind of spaces including the alternate reality space owned and exclusively controlled by the patient himself or herself, and even the real space as well. Most of the physical contact, such as the visit to the out patient office by the patient, is actualized by the electronic connection of the patient private space and the public space of the hospital system. Prescription drugs, special care, and even the admission to the ward will be integrated into the distributed electronic network. To realize such a system, we need to solve many problems, such as the research on the network oriented architecture of the alternate reality, the development of human-machine interface particularly fitted to various disabilites, the study of the behavior of normal and diseased people, etc. The concept of the Hyper Hospital we are proposing is believed to be a new paradigm of the next generation of medical care.

The Hyper Hospital" is a novel medical care system which will be constructed on an electronic information network. The human interface of the Hyper Hospital based on the modern virtual reality technology is expected to enhance patients' ability to heal by providing computer-supported on-line visual consultations. In order to investigate the effects and features of on-line visual consultations in the Hyper Hospital, we conducted an experiment to clarify the influence of electronic interviews on the talking behavior of interviewees in the context of simulated doctor-patient interactions. Four types of distant-confrontation interviews were made with voluntary subjects and their verbal and non-verbal responses were analyzed from the behavioral point of view. The types of interviews included three types of electronic media-mediated interviews and one of a live face to face interview. There was a tendency in the media-mediated interviews that both the latency and the duration of interviewees' utterances in answering questions increased when they were compared with those of live face to face interviews. These results suggest that the interviewee became more verbose or talkative in the media-mediated interviews than in the live interviews. However, the interviewee's psychological tension was generally augmented in the media-mediated interviews, which was suggested by the delay of the initiation of conversations as compared to the conventional face-to-face interviews. We also discuss the applicability of media-mediated interviews by an electronic doctor which we are studying as a functional unit of our Hyper Hospital, a network based virtual reality space for medical care.

We have developed a Virtual Playground," which allows various activities such as virtual playground and virtual visiting areas for hospitalized children who can not usually go outside. A Virtual Playground system is composed of TV monitors, joysticks, cameras, video transmission devices, and a graphics workstation. In a Virtual Playground environment, children can experience what is impossible or difficult during their stay in a hospital. We have completed a couple of experiments already and discussed its effects.* In our recent work, we also introduced a simple version of the Cave display to the Virtual Playground system.

For a CBR (Constant Bit Rate) connection in an ATM (Asynchronous Transfer Mode) network, we determine the CDV (Cell Delay Variation) tolerance for the mapping of ATM cells from the ATM Layer onto the Physical Layer. Our result will be useful to properly allocate resources to connections and to accurately enforce the contract governing the user's cell traffic by UPC (Usage Parameter Control).

We discuss ISDB (Integrated Services Digital Broadcasting) which has a transport structure to meet the technical requirements such as the flexibility and the extensibility of broadcasting in the future. The basic configuration of the ISDB transmission signal for distribution into various transmission channels is shown. Hybrid multiplexing, which uses common fixed-length packets and structured transmission units called "slots," is introduced to construct a transmission signal for low-cost signal processing in ISDB receivers. We show that a fixed packet length of 40-240 bytes results in high transmission efficiency in a diverse range of service arrangements. Furthermore, we use transmission control methods, which show the relationship between programs and packet IDs, to select the desired program with certainty and ease.

This paper presents a new sort of multilayer piezoelectric ceramic transformer for switching regulated power supplies. This piezoelectric transformer operates in the second thickness extensional vibration mode. Its resonant frequency is higher than 1 MHz. First, numerical simulation was implemented using a distributed constant electromechanical equivalent circuit method. It was calculated that this piezoelectric transformer, which has higher than 200 mechanical quality factor Qm, could work with higher than 90% efficiency and in more than 20-W/cm3 high power density. Second, a trially fabricated transformer, which is 15 mm long, 15 mm wide and 2.2 mm thick, was examined. Modified PbTiO3 family ceramics were used for the piezoelectric transformer material, because of the large anisotropy between electromechanical coupling factors kt and kp. Obtained results indicate that the piezoelectric transformer has good resonant characteristics, with little spurious vibration, and exhibits 16-W/cm3 power density with high efficiency at 2 MHz. Moreover, a switching regulated power supply, applying the piezoelectric ceramic transformer, was built and examined.

This paper describes an adaptively weighted code division multiplexing (AW-CDM) system, in other words, power controlled spread-spectrum multiplexing system and describes its application to hierarchical digital broadcasting of television signals. The AW-CDM, being combined with multi-resolutional video encoder, can provide such a hierarchical transmission that allows both high quality services for fixed receivers and reduced quality services for mobile/portable receivers. The carrier and the clock are robustly regenerated by using a spread-spectrum multiplexed pseudorandom noise (PN) sounder as a reference in the receiver. The PN reference is also used for Rake combining with signals via different paths, and for adaptive equalization (EQ). In a prototype AW-CDM modem, three layers of hierarchical video signals (highs: 5.91Mbps, middles: 1.50Mbps, and lows: 0.46 Mbps) are divided into a pair of 64 orthogonal spread-spectrum subchannels, each of which can be given a different priority and therefore a different threshold. In this case, three different thresholds are given. The modem's transmission rate is 9.7Mbps in the 6MHz band. Indoor transmission tests confirm that lows (weighted power layer I), middles (averaged power layer II), and highs (lightened power layer III) are retrievable under conditions in which the desired to undesired signal ratios (DURs) are respectively 0dB, 8.5dB, and 13.5dB. If the undesired signals are multipaths, these performances are dramatically improved by Rake combining and EQ. The AW-CDM system can be used for 20-30 Mbps advanced television (ATV) transmission in the 6-MHz bandwidth simply by changing the binary inputs into quaternary or octonary inputs.

This paper compares three typical system-sharing configurations for FTTH networks that provide narrowband and video distribution services and proposes a remote node locating strategy for each configuration. Two new evaluation factors, required land space and service provisioning effort, are included in the calculation, in addition to facility cost and maintenance effort. By considering these factors together, the total network cost is calculated and the sensitivity to the number of remote nodes is evaluated. Finally, the most economical system-sharing configuration is identified on the basis of the evaluations for two typical service areas in Japan, for both present and future cost environments.

Mixed-signal LSIs promise to permit increased levels of integration, not only in voiceband but also in multi-GHz-band applications such as wireless communications and optical data links. This paper reviews the evolution of mixed-signal communications LSIs and discusses some of their design problems, including device noise and crosstalk noise. In the low-power and low-voltage designs emerging as new disciplines, the target supply voltage for voiceband LSIs is around 1 V, and even GHz-band circuits are approaching 2 V. MOS devices are expected to play an important role even in the frequency range over 100 MHz, in the area of wireless or optical communications circuits.

This paper presents an analysis of the control characteristics of the series resonant converter with a parallel resonant circuit, especially under parallel resonant frequency. Operations of the circuit are classified into several modes. The control characteristics are calculated using the equations derived from equivalent circuits, and are verified by the experiments. From the analysis, the mechanism of a jumping phenomenon in the closed-loop control characteristics is clarified.

This paper presents a fast and practical routing algorithm implemented on a supercomputer. In previously reported work, routing has been accelerated by executing the maze algorithm on parallel processing elements. However, although many parallel algorithms and special architectures have been introduced, practical aspects have not been addressed. We therefore present a novel approach that uses a vector processor as a routing accelerator and a wavefront control algorithm in order to avoid the wasteful searches that often occur in industrial routing problems. Experimental results that show the performance of a supercomputer using these algorithms is equivalent to over 1800 VAXMIPS, the fastest yet reported for routing accelerators. Results with industrial data also prove the validity of our approach.

Processing elements (PEs) with a dynamically reconfigurable pipeline architecture allow the high-speed calculation of widely used neural model which is multi-layer perceptrons with the backpropagation (BP) learning rule. Its architecture that was proposed for a single chip is extended to multiprocessors' structure. Each PE holds an element of the synaptic weight matrix and the input vector. Multi-local buses, a swapping mechanism of the weight matrix and the input vector, and transfer commands between processor elements allow the implementation of neural networks larger than the physical PE array. Estimated peak performance by the measurement of single processor element is 21.2 MCPS in the evaluation phase and 8.0 MCUPS during the learning phase at a clock frequency of 50 MHz. In the model, multi-layer perceptrons with 768 neurons and 131072 synapses are trained by a BP learning rule. It corresponds to 1357 MCPS and 512 MCUPS with 64 processor elements and 32 neurons in each PE.

This paper describes the circuit design and experimental results of a video-rate 10-b analog-to-digital converter (ADC) suitable for consumer video products, such as high-definition TV sets. Triple-stage conversion scheme combined with two new conversion methods, "Dynamic Sliding Reference Method" and "Triangular Interpolation Method," and an internal Bi-CMOS Sample/Hold circuit have been developed. These conversion methods require no adjustment circuit to fit reference voltages between conversion stages and realize small active area. As a result, a maximum conversion frequency of 16 MHz, acceptable SNRs of 56 dB and 48 dB for 10 kHz and 8 MHz input frequency respectively and small DNLE of 0.75 LSB have been achieved. This ADC is fabricated with 1.2 µm Bi-CMOS technology and integrates very small number of bipolar transistors of 2 K on a small active area of 2.52.7 mm2 and consumes 350 mW.

Technology mapping algorithms for LUT (Look Up Table) based FPGAs have been proposed to transfer a Boolean network into logic-blocks. However, since those algorithms take no layout information into account, they do not always lead to excellent results. In this paper, a simultaneous technology mapping, placement and global routing algorithm for FPGAs, Maple, is presented. Maple is an extended version of a simultaneous placement and global routing algorithm for FPGAs, which is based on recursive partition of layout regions and block sets. Maple inherits its basic process and executes the technology mapping simultaneously in each recursive process. Therefore, the mapping can be done with the placement and global routing information. Experimental results for some benchmark circuits demonstrate its efficiency and effectiveness.

This paper proposes a new signaling technique which employs multilevel block codes in conjunction with phase/frequency modulation. The proposed scheme exhibits an increased minimum squared Euclidean distances (MSEDs) and outperforms other conventional schemes in terms of asymptotic coding gain and decoding complexity. The proposed scheme is also considered for non-constant amplitudes, which turned out to show even better performances at small modulation indices in some cases. Examples are given to demonstrate how to optimize the signal set for a given block code to maximize the coding gain.

This paper describes a new clustering approach for VLSI placement, which is based on a fractal dimension analysis for the topological structure of modules in a logic diagram. A distinctive feature of this approach is that a measure of the 'fractal dimension' has been introduced into a logic diagram in such a way that the clustering of modules is iterated while the fractal dimension among clustered modules is retained in a prescribed range. A part of experimental results is also shown, which demonstrates that our clustering approach raises the placement performance much higher than the conventional clustering methods.

Considering the trend towards adopting high efficiency picture coding schemes into digital broadcasting services, we investigate objective picture quality scales for evaluating digitally encoded still and moving pictures. First, the study on the objective picture quality scale for high definition still pictures coded by the JPEG scheme is summarized. This scale is derived from consideration of the following distortion factors; 1) weighted noise by the spatial frequency characteristics and masking effects of human vision, 2) block distortion, and 3) mosquito noise. Next, an objective picture quality scale for motion pictures of standard television coded by the hybrid DCT scheme is studied. In addition to the above distortion factors, the temporal frequency characteristics of vision are also considered. Furthermore, considering that all of these distortions vary over time in motion pictures, methods for determining a single objective picture quality value for this time varying distortion are examined. As a result, generally applicable objective picture quality scale is obtained that correlates extremely well with subjective picture quality scale for both still and motion pictures, irrespective of the contents of the pictures. Having an objective scale facilitates automated picture quality evaluation and control.

This paper presents a heuristic floorplanning method that improves the method proposed by Vijayan and Tsay. It is based on tentative insertion of constraints, that intentionally produces redundant constraints to make it possible to search in a wide range of solution space. The proposed method can reduce the total area of blocks with the removal and insertion of constraints on the critical path in both horizontal and vertical constraint graphs. Experimental results for MCNC benchmarks showed that the quality of solutions of the proposed method is better than [7],[8] by about 15% on average, and even for the large number of blocks, the proposed method keeps the high quality of solutions.