A 0.8-V CMOS Phase-Locked Loop (PLL) has been designed and fabricated by using a 0.13-µm 1p8m CMOS process. In the proposed PLL, the double-positive-feedbacks voltage-controlled oscillator (DPF-VCO) is used to generate current signals for the coupling current-mode injection-locked frequency divider (CCMILFD) and current-injection current-mode logic (CICML) divider. A short-pulsed-reset phase frequency detector (SPR-PFD) with the reduced pulse width of reset signal to improve the linear range of the PFD and a complementary-type charge pump to eliminate the current path delay are also adopted in the proposed PLL. The measured in-band phase noise of the fabricated PLL is -98 dBc/Hz. The locking range of the PLL is from 22.6 GHz to 23.3 GHz and the reference spur level is -69 dBm that is 54 dB bellow the carrier. The power consumption is 9.2 mW under a 0.8-V power supply. The proposed PLL has the advantages of low phase noise, low reference spur, and low power dissipation at low voltage operation.

A compact antenna capable of generating two wide operating bands to cover the GSM850/900 (824–960 MHz) and GSM1800/1900/UMTS (1710–2170 MHz) systems is presented. The antenna occupies just 81.5(L)7(W)0.5(H) mm3 on the top edge of the supporting metal frame of the display panel, and is therefore easily embedded in the ultra-thin laptop computers as an internal antenna. The antenna is implemented using a ceramic substrate and consists of multi-branch strips. Based on the principle of the inverted-F antenna, our design yields two operating bands covering 816–983 MHz and 1703–2196 MHz can be achieved with good radiation performance for our design. The proposed antenna is thus suitable to be installed in the ultra-thin laptop computers for Wireless Wide Area Network applications.

In this paper, we present an approach of detecting speech presence for which the decision rule is based on a combination of multiple features using a sigmoid function. A minimum classification error (MCE) training is used to update the weights adjustment for the combination. The features, consisting of three parameters: the ratio of ZCR, the spectral energy, and spectral entropy, are combined linearly with weights derived from the sub-band domain. First, the Bark-scale wavelet decomposition (BSWD) is used to split the input speech into 24 critical sub-bands. Next, the feature parameters are derived from the selected frequency sub-band to form robust voice feature parameters. In order to discard the seriously corrupted frequency sub-band, a strategy of adaptive frequency sub-band extraction (AFSE) dependant on the sub-band SNR is then applied to only the frequency sub-band used. Finally, these three feature parameters, which only consider the useful sub-band, are combined through a sigmoid type function incorporating optimal weights based on MSE training to detect either a speech present frame or a speech absent frame. Experimental results show that the performance of the proposed algorithm is superior to the standard methods such as G.729B and AMR2.

Complex-valued Associative Memory (CAM) is an advanced model of Hopfield Associative Memory. The CAM is based on multi-state neurons and has the high ability of representation. Lee proposed gradient descent learning for the CAM to improve the storage capacity. It is based on only the phases of input signals. In this paper, we propose another type of gradient descent learning based on both the phases and the amplitude. The proposed learning method improves the noise robustness and accelerates the learning speed.

Fourier transform is a significant tool in image processing and pattern recognition. By introducing a hypercomplex number, hypercomplex Fourier transform treats a signal as a vector field and generalizes the conventional Fourier transform. Inspired from that, hypercomplex polar Fourier analysis that extends conventional polar Fourier analysis is proposed in this paper. The proposed method can handle signals represented by hypercomplex numbers as color images. The hypercomplex polar Fourier analysis is reversible that means it can be used to reconstruct image. The hypercomplex polar Fourier descriptor has rotation invariance property that can be used for feature extraction. Due to the noncommutative property of quaternion multiplication, both left-side and right-side hypercomplex polar Fourier analysis are discussed and their relationships are also established in this paper. The experimental results on image reconstruction, rotation invariance, color plate test and image retrieval are given to illustrate the usefulness of the proposed method as an image analysis tool.

This paper presents a new low-dropout (LDO) regulator with low-quiescent, high-drive and fast-transient performance. This is based on a new composite power transistor composed of a shunt feedback class-AB embedded gain stage and the application of dynamic-biasing schemes to both the error amplifier as well as the composite power transistor. The proposed LDO regulator has been simulated and validated using BSIM3 models and GLOBALFOUNDRIES 0.18-µm CMOS process. The simulation results have shown that the LDO regulator consumes 4.7 µA quiescent current at no load, regulating the output at 1 V from a minimum 1.2 V supply. It is able to deliver up to 450 mA load current with a dropout of 200 mV. It can be stabilized using a 4.7 µF output capacitor with a 0.1 Ω ESR resistor. The maximum transient output voltage is 64.6 mV on the basis of a load step change of 450 mA/10 ns under typical condition. The full load transient response is less than 350 ns.

Locally linear embedding (LLE) is a well-known method for nonlinear dimensionality reduction. The mathematical proof and experimental results presented in this paper show that the neighborhood sizes in LLE must be smaller than the dimensions of input data spaces, otherwise LLE would degenerate from a nonlinear method for dimensionality reduction into a linear method for dimensionality reduction. Furthermore, when the neighborhood sizes are larger than the dimensions of input data spaces, the solutions to LLE are not unique. In these cases, the addition of some regularization method is often proposed. The experimental results presented in this paper show that the regularization method is not robust. Too large or too small regularization parameters cannot unwrap S-curve. Although a moderate regularization parameters can unwrap S-curve, the relative distance in the input data will be distorted in unwrapping. Therefore, in order to make LLE play fully its advantage in nonlinear dimensionality reduction and avoid multiple solutions happening, the best way is to make sure that the neighborhood sizes are smaller than the dimensions of input data spaces.

Distance to target is fundamental and very important information in numerous engineering fields. Many distance measurement methods using sound use the time delay of a reflected wave, which is measured in reference to the transmitted wave. This method, however, cannot measure short distances because the transmitted wave, which has not attenuated sufficiently by the time the reflected waves are received, suppresses the reflected waves for short distances. Therefore, we proposed an acoustic distance measurement method based on the interference between the transmitted wave and the reflected waves, which can measure distance in a short range. The proposed method requires a cancellation processing for background components due to the spectrum of the transmitted wave and the transfer function of the measurement system in real environments. We refer to this processing as background components cancellation processing (BGCCP). We proposed BGCCP based on subtraction or whitening. However, the proposed method had a limitation with respect to the transmitted wave or additive noise in real environments. In the present paper, we propose an acoustic distance measurement method based on the new BGCCP. In the new BGCCP, we use the calibration of a real measurement system and the whitening processing of the transmitted wave and introduce the concept of the cepstrum to the proposed method in order to achieve robustness. Although the conventional BGCCP requires the recording of the transmitted wave under the condition without targets, the new BGCCP does not have this requirement. Finally, we confirmed the effectiveness of the proposed method through experiments in real environments. As a result, the proposed method was confirmed to be valid and effective, even in noisy environments.

This paper presents the design consideration of a four-stage variable gain amplifier (VGA) with a wide dynamic range for receivers. The VGA uses parallel amplifiers for the first and second amplifiers in order to improve the input third-order intercept point (IIP3) in the low gain region. To investigate the behavior of the VGA, the gain and linearity analyses are newly derived for the parallel amplifiers, and are compared with the measured results. In addition, the principle of the temperature compensation is described. The gain control range of 110 dB, the IP1 dB of -11 dBm, and noise figure (NF) of 5.1 dB were measured using a 0.5 µm 26 GHz fT BiCMOS process.

We consider a queuing model with applications to electric vehicle (EV) charging systems in smart grids. We adopt a scheme where an Electric Service Company (ESCo) broadcasts a one bit signal to EVs, possibly indicating 'on-peak' periods during which electricity cost is high. EVs randomly suspend/resume charging based on the signal. To model the dynamics of EVs we propose an M/M/∞ queue with random interruptions, and analyze the dynamics using time-scale decomposition. There exists a trade-off: one may postpone charging activity to 'off-peak' periods during which electricity cost is cheaper, however this incurs extra delay in completion of charging. Using our model we characterize achievable trade-offs between the mean cost and delay perceived by users. Next we consider a scenario where EVs respond to the signal based on the individual loads. Simulation results show that peak electricity demand can be reduced if EVs carrying higher loads are less sensitive to the signal.

In this letter, we determine the linear complexity and minimum polynomial of the frequency hopping sequences over GF(q) introduced by Chung and Yang, where q is an odd prime. The results of this letter show that these sequences are quite good from the linear complexity viewpoint. By modifying these sequences, another class of frequency hopping sequences are obtained. The modified sequences also have low Hamming autocorrelation and large linear complexity.

An unsupervised algorithm is proposed for learning overcomplete topographic representations of nature image. Our method is based on Independent Component Analysis (ICA) model due to its superiority on feature extraction, and overcomes the weakness of traditional method in fast overcomplete learning. Besides, the learnt topographic representation, resembling receptive fields of complex cells, can be used as descriptors to extract invariant features. Recognition experiments on Caltech-101 dataset confirm that these complex cell descriptors are not only efficient in feature extraction but achieve comparable performances to traditional descriptors.

This paper proposed a novel platform for sensor nodes to resolve the energy and latency challenges. It consists of a processor, an adaptive compressing module and several compression accelerators. We completed the proposed chip in a 0.18µm HJTC CMOS technology. Compared to the software-based solution, the hardware-assisted compression reduces over 98% energy and 212% latency. Besides, we balanced the energy and latency metric using an adaptive module. According to the scheduling algorithm, the module tunes the state of the compression accelerator, as well as the sampling frequency of the online sensor. For example, given a 9µs constraint for a 1-byte operation, it reduces 34% latency while the energy overheads are less than 5%.

This research proposes a Coding-Gain-Based (CGB) complexity control method for real-time H.264 video encoding in complexity-constrained systems such as wireless handsets. By allocating more complexity to the encoding tools which have higher coding efficiency, the CGB method is able to maximize the overall coding efficiency of the encoder.

We demonstrate an all-optical picosecond pulse duration-tunable nonreturn-to-zero (NRZ)-to-return-to-zero (RZ) data format conversion using a Raman amplifier-based compressor and a fiber-based four-wave mixing (FWM) switch. A NRZ data signal is injected into the fiber-based FWM switch (AND gate) with a compressed RZ clock by the Raman amplifier-based compressor, and convert to RZ data signal by the fiber-based FWM switch. The compressed RZ clock train acts as a pump signal in the fiber-based FWM switch to perform the NRZ-to-RZ data format conversion. By changing the Raman pump power of the Raman amplifier-based compressor, it is possible to tune the pulse duration of the converted RZ data signal from 15 ps to 2 ps. In all the tuning range, the receiver sensitivity at bit error rate (BER) of 10-9 for the converted RZ data signal was about 1.31.7 dB better than the receiver sensitivity of the input NRZ data signal. Moreover, the pulse pedestal of the converted RZ data signals is well suppressed owing to the FWM process in the fiber-based FWM switch.

A stereo video coding scheme which is compatible with monoview-processor is presented in this paper. At the same time, this paper proposes an adaptive prediction structure which can make different prediction modes to be applied to different groups of picture (GOPs) according to temporal correlations and interview correlations to improve the coding efficiency. Moreover, the most advanced video coding standard H.264 is used conveniently for maximize the coding efficiency in this paper. Finally, the effectiveness of the proposed scheme is verified by extensive experimental results.

A translucent wavelength switched optical network (WSON) is a cost-efficient infrastructure between opaque networks and transparent optical networks, which aims at seeking a graceful balance between network cost and service provisioning performance. In this paper, we experimentally present a resilient translucent WSON with the control of an enhanced path computation element (PCE) and extended generalized multi-protocol label switching (GMPLS) controllers. An adaptive routing and wavelength assignment scheme with the consideration of accumulated physical impairments, wavelength availabilities and regenerator allocation is experimentally demonstrated and evaluated for dynamic provisioning of lightpaths. By using two different network scenarios, we experimentally verify the feasibility of the proposed solutions in support of translucent WSON, and quantitatively evaluate the path computation latency, network blocking probability and service disruption time during end-to-end lightpath restoration. We also deeply analyze the experimental results and discuss the synchronization between the PCE and the network status. To the best of our knowledge, the most significant progress and contribution of this paper is that, for the first time, all the proposed methodologies in support of PCE/GMPLS controlled translucent WSON, including protocol extensions and related algorithms, are implemented in a network testbed and experimentally evaluated in detail, which allows verifying their feasibility and effectiveness when being potentially deployed into real translucent WSON.

When a link or node fails in a network, the affected flows are automatically rerouted. This increases the hop counts of the flows, which can drastically degrade network performance. Keeping the hop lengths as stable as possible, i.e., minimizing the difference in hop length between the original flow and the rerouted flow is important for network reliability. Therefore, network service providers need a method for designing networks that stabilizes the flow hop length and maintains connectivity during a link or node failure with limited investment cost. First, we formulate the network design problem used for determining the set of links to be added that satisfies the required constraints on flow hop length stability, connectivity, and node degree. Next, we prove that this problem is NP-complete and present two approximation algorithms for the optimization problem so as to minimize the number of links added. Evaluation of the performance of these algorithms by using 39 backbone networks of commercial ISPs and networks generated by two well-known models showed that the proposed algorithms provide effective solutions in sufficiently short computation time.

This paper presents a novel technique to realize Karnin et al.'s (k,n)-threshold schemes over binary field extensions as a software. Our realization uses the matrix representation of finite fields and matrix-vector multiplications, and enables rapid operations in software implementation. The theoretical evaluation and computer simulation reveal that our realization of Karnin et al.'s scheme achieves much faster processing time than the ordinary symbol oriented realization of the scheme. Further, we show that our realization has comparable performance to the existing exclusive-OR-based fast schemes of Fujii et al. and Kurihara et al.

A 0.6-V voltage shifter and a 0.6-V clocked comparator are presented for sampling correlation-based impulse radio UWB receiver. The voltage shifter is used for a novel split swing level scheme-based CMOS transmission gate which can reduce the power consumption by four times. Compared to the conventional voltage shifter, the proposed voltage shifter can reduce the required capacitance area by half and eliminate the non-overlapping complementary clock generator. The proposed 0.6-V clocked comparator can operate at 100-MHz clock with the voltage shifter. To reduce the power consumption of the conventional continuous-time comparator based synchronization control unit, a novel clocked-comparator based control unit is presented, thereby achieving the lowest energy consumption of 3.9 pJ/bit in the correlation-based UWB receiver with the 0.5 ns timing step for data synchronization.