We demonstrated all-optical demultiplexing of 160-Gb/s signal to 40- and 80-Gb/s by a Mach-Zehnder Interferometric all-optical switch, where the picosecond cross-phase modulation (XPM) induced by intersubband excitation in InGaAs/AlAsSb coupled double quantum wells is utilized. A bi-directional pump configuration, i.e., two control pulses are injected from both sides of a waveguide chip simultaneously, increases a nonlinear phase shift twice in comparison with injection of single pump beam with forward- and backward direction. The bi-directional pump configuration is the effective way to avoid damaging waveguide facets in the case where high optical power of control pulse is necessary to be injected for optical gating at repetition rate of 40/80 GHz. Bit error rate (BER) measurements on 40-Gb/s demultiplexed signal show that the power penalty is decreased slightly for the bi-directional pump case in the BER range less than 10-6. The power penalty is 1.3 dB at BER of 10 - 9 for the bi-directional pump case, while it increases by 0.3-0.6 dB for single pump cases. A power penalty is influenced mainly by signal attenuation at "off" state due to the insufficient nonlinear phase shift, upper limit of which is constrained by the current low XPM efficiency of 0.1 rad/pJ and the damage threshold power of 100 mW in a waveguide facet.

In this paper, a perceptually adaptive watermarking scheme for color images is proposed in order to achieve robustness and transparency. A new just noticeable distortion (JND) estimator for color images is first designed in the wavelet domain. The key issue of the JND model is to effectively integrate visual masking effects. The estimator is an extension to the perceptual model that is used in image coding for grayscale images. Except for the visual masking effects given coefficient by coefficient by taking into account the luminance content and the texture of grayscale images, the crossed masking effect given by the interaction between luminance and chrominance components and the effect given by the variance within the local region of the target coefficient are investigated such that the visibility threshold for the human visual system (HVS) can be evaluated. In a locally adaptive fashion based on the wavelet decomposition, the estimator applies to all subbands of luminance and chrominance components of color images and is used to measure the visibility of wavelet quantization errors. The subband JND profiles are then incorporated into the proposed color image watermarking scheme. Performance in terms of robustness and transparency of the watermarking scheme is obtained by means of the proposed approach to embed the maximum strength watermark while maintaining the perceptually lossless quality of the watermarked color image. Simulation results show that the proposed scheme with inserting watermarks into luminance and chrominance components is more robust than the existing scheme while retaining the watermark transparency.

This paper deals with the scattering of a transverse magnetic (TM) plane wave from a perfectly conductive surface with a finite periodic array of rectangular grooves. By use of the method in a previous paper [IEICE TRANS. ELECTRON. VOL.E90-C, no.4, pp.903-906, APRIL 2007], the total scattering cross section is numerically calculated for several different numbers of grooves at a low grazing angle of incidence. It is newly found that, when the corrugation width becomes thousands times of wavelength, the total scattering cross section slightly depends on the groove depth and the period, and becomes almost proportional to square root of the corrugation width with a small correction.

The asymptotic behaviour of the light power at large distance in a random waveguide system with a short correlation length and a mathematical mechanism of the asymptotic behaviour are clarified. The discussion is based on the coupled mode theory. First, for the light propagation in an ordered waveguide system a new description in terms of the light power is presented. A solution of the integro-differential equation describing the light power is expressed as a contour integral in the Laplace transform domain. Singularities of the integrand are branch points and the branch cut integral determines the asymptotic behaviour of the solution. The light power decreases in inverse proportion to the distance. Secondly the description is extended to the case of a random waveguide system. The differential equation of the recurrence type describing the incoherent power is reduced to the integro-differential equation and it is shown that the kernel is the product of the kernel for an ordered system and the damping term. The equation is solved by using the same procedure as that for an ordered system and a contour integral representation of the solution is obtained. Singularities of the integrand are poles and branch points. The poles arise from the damping term of the kernel and the residues of the poles determine the asymptotic behaviour of the solution. The incoherent power decreases in inverse proportion to the square root of the distance.

Orthogonal Frequency Division Multiple Access (OFDMA) is the technique for the next generation wireless networks, whose enhanced capacity is to serve a combination of traffic with diverse QoS requirements. To realize this, the resource allocation scheme has to be carefully designed so that the instantaneous channel condition, QoS provision, and the network utilization are integrated. In this paper, we propose the resource allocation scheme for downlink traffic of 2 classes; guaranteed and non-guaranteed, having different traffic contracts. We provide guaranteed throughput for the guaranteed class by considering the cost incurred from serving this class. Then, we formulate the assignment problem with the objective of minimizing this cost. For the non-guaranteed class, we aim to maximize network utilization and to maintain throughput fairness, by employing Proportional Fairness (PF) utility function and emphasizing on the portion of network resource that the user received and the individual user's queue length. We use a heuristic approach to schedule users' data into the downlink subframe by exploiting multi-user multi-channel diversity to utilize system's bandwidth efficiently. Intensive simulation shows that our scheme differentiates classes of traffic and provides satisfied throughput, lower packet drop rate, and lower queuing delay to the guaranteed class, comparing with those of the non-guaranteed class. Furthermore, the results also show that the scheme is fair to users in the same class in both throughput and service time.

Clonal Selection Algorithm (CSA), based on the clonal selection theory proposed by Burnet, has gained much attention and wide applications during the last decade. However, the proliferation process in the case of immune cells is asexual. That is, there is no information exchange during different immune cells. As a result the traditional CSA is often not satisfactory and is easy to be trapped in local optima so as to be premature convergence. To solve such a problem, inspired by the quantum interference mechanics, an improved quantum crossover operator is introduced and embedded in the traditional CSA. Simulation results based on the traveling salesman problems (TSP) have demonstrated the effectiveness of the quantum crossover-based Clonal Selection Algorithm.

This paper presents a high performance and hardware efficient packet detection structure, which employs a cross correlator for the M-sample time delayed correlation operation and a signal power calculator using the received input samples less than or equal to a zero-padded suffix of length M. We investigate the detailed characteristics of the proposed packet detector. In this paper, the performance of a class of packet detection algorithms in the ultra-wideband (UWB) channel environments is also studied. The best packet detection algorithm for the multi-band orthogonal frequency division multiplexing (MB-OFDM) UWB transmission is determined through analysis and extensive simulations. The results of analysis show that the proposed packet detection structure has advantages in the hardware complexity as well as performance when compared with the existing packet detection structures. In order to effectively conduct the packet detection before the automatic gain control (AGC) mode, we investigate the effects of both a frequency offset and the initial gain level of a variable gain amplifier (VGA) on the performance of the packet detection. We also suggest a VGA gain control technique to enhance the performance of packet detection.

In situ observation of electrochemical activity and time dependent characteristics of cytochrome c (cyt c) was carried out in 0.01 M phosphate buffered saline (PBS, pH 7.4) containing 20 µM cyt c solutions at bare indium-tin-oxide (ITO) electrodes by using a cyclic voltammetry (CV) and a slab optical waveguide (SOWG) spectroscopy. The bare ITO electrodes could retain the electrochemical activity of cyt c in the PBS solutions, indicating the great advantage of using ITO electrodes against other electrode materials, such as gold (Au). The CV curves and simultaneously observed the time-resolved SOWG absorption spectra in the consecutive cycles implied that the cyt c molecules could retain its own electrochemical function for a long time.

As the semiconductor feature size decreases, the crosstalk due to the capacitive coupling of interconnects influences signal propagation delay more seriously. Moreover, the increase of the operating frequency further emphasizes the necessity of more accurate timing analysis. In this paper, we propose new gate models to calculate gate output waveforms under crosstalk effects, which can be used for gate-level delay estimation. We classify the operation modes of metal-oxide-semiconductor (MOS) devices of a gate into 3 regions, and then develop simple linear models for each region. In addition, we present a non-iterative gate modeling method that is more efficient than previous iterative methods. In the experiments, the proposed method exhibits a maximum error of 10.70% and an average error of 2.63% when it computes the 50% delays of two or three complementary MOS (CMOS) inverters driving parallel wires. In comparison, the existing method has a maximum error of 25.94% and an average error of 3.62% under these conditions.

In approximately synchronous CDMA (AS-CDMA) systems, zero correlation zone (ZCZ) sequences are known as the sequences to eliminate co-channel and multi-path interferences. Therefore, numerous constructions of zero correlation zone (ZCZ) sequences have been introduced e.g. based on perfect sequences and complete complementary codes etc. However, the previous construction method which based on complete complementary code is lacking for merit figures when none of whose elements are zero. In this paper, a new construction method of ZCZ sequences based on complete complementary codes is proposed. By proposed method, non zero elements ZCZ sequences whose merit figure is greater than 1/2 are constructable.

To evaluate frequency-domain interference between orthogonally intersecting stripline geometries, a lumped mutual capacitance was incorporated into a circuit model, and then a simplified circuit was proposed in the previous paper. The circuit model was approximated from an investigation of the distribution of mutual capacitance but it has remained how the capacitance is approximated. In this paper, a technique using an error function is proposed for the problem. Then, the time-domain response in an analytical expression is studied using the simplified circuit model in a Laplace transformation to make the mechanism clear. Comparing the experimental and the computed results verifies the proposed models.

In-situ measurement of photoelectron spectra of polypyrrole during electrochemical undoping/doping cycles has been carried out by using an open-type electrochemical cell. It has been observed that the ionization potential decreases with decreased electrochemical potential. This result seems to be reasonable because the decreased electrochemical potential corresponds to the undoping or recovery of electrons into vacant state of valence band.

This letter presents a novel approach for traffic light detection in a video frame captured by an in-vehicle camera. The algorithm consists of rotated principal component analysis (RPCA), modified amplitude thresholding with respect to the histograms of the PC planes and final filtering with a neural network. The proposed algorithm achieves an average detection rate of 96% and is very robust to variations in the image quality.

In this paper, we analyze existing vulnerabilities in handover for mobile WiMAX networks. To overcome these vulnerabilities, we propose a secure handover protocol that guarantees mutual authentication and forward/backward secrecy in handover. We present a formal analysis of our protocol using a logic-based formal method.

The electrostatic force required for the driving of liquid droplet injected in a microchannel was studied to obtain the guiding principle to reduce the driving voltage of waveguide optical switch based on the movement of droplet. We analytically calculated the relation between the threshold voltage and velocity of droplet and the surface roughness of microchannel, and clarified some unconfirmed parameters by comparing experimental results and aeromechanical analysis. The driving of droplet in a microchannel was best analyzed using the Hagen-Poiseuille flow theory, taking into account the movement of both ends of the droplet. When the droplet is driven by some external force, a threshold of the external force occurs in the starting of movement, and hysteresis occurs in the contact angle of the droplet to the side wall of the microchannel. The hysteresis of contact angle is caused by the roughness of side wall. In our experiment, the threshold voltage ranged from 200 to 350 V and the switching time from 34 to 36 ms. The velocity of droplet was evaluated to be 0.3-0.4 mm/s from these experimental results. On the other hand, the measured angle distribution of side wall roughness ranged from 30 to 110 degrees, and the threshold voltage was evaluated to be 100-320 V, showing a good agreement with experimental results. The reduction of threshold voltage can be realized by smoothing the side wall roughness of microchannel. The switching time of 10 ms, which is required for the optical stream switch, can be obtained by shortening the horizontal spot size down to 1.5 µm.

In 3D computer graphics, mesh parameterization is a key technique for digital geometry processings such as morphing, shape blending, texture mapping, re-meshing and so on. Most of the previous approaches made use of an identical primitive domain to parameterize a mesh model. In recent works of mesh parameterization, more flexible and attractive methods that can create direct mappings between two meshes have been reported. These mappings are called "cross-parameterization" and typically preserve semantic feature correspondences between target meshes. This paper proposes a novel approach for parameterizing a mesh into another one directly. The main idea of our method is to combine a competitive learning and a least-square mesh techniques. It is enough to give some semantic feature correspondences between target meshes, even if they are in different shapes or in different poses.

We propose Isochronous-MAC (I-MAC) using the Long-Wave Standard Time Code (so called "wave clock"), and introduce cross-layer design for a low-power wireless sensor node with I-MAC. I-MAC has a periodic wakeup time synchronized with the actual time, and thus we take the wave clock. However, a frequency of a crystal oscillator varies along with temperature, which incurs a time difference among nodes. We present a time correction algorithm to address this problem, and shorten the time difference. Thereby, the preamble length in I-MAC can be minimized, which saves communication power. For further power reduction, a low-power crystal oscillator is also proposed, as a physical-layer design. We implemented I-MAC on an off-the-shelf sensor node to estimate the power saving, and verified that the proposed cross-layer design reduces 81% of the total power, compared to Low Power Listening.

Ultra wideband (UWB) radar cross sections (RCSs) of several targets have been measured using various combinations of transmitting and receiving linear polarizations (V-V, H-H, and +45- -45) with a view to obtaining information on the design of vehicular short-range radars. This paper reports the UWB RCSs (σLR and σLL) of a typical passenger automobile using two circular polarization combinations (L and R denote left and right circular polarizations). The wideband measurements were carried out with use of a vector network analyzer by sweeping the frequency from 24.5 to 28.8 GHz in a radio anechoic chamber. The UWB RCSs were derived by integrating the received power in the frequency domain. Similar to the linear polarization results, fluctuations of the RCSs were smaller in the UWB than in narrowband for both L-R and L-L, because the ultra-wide bandwidth cancels out RCS plunges caused by narrowband interference among reflected waves from various facets of the target. The median of (σLR- σLL) was 2 dB, while the median of (σHH - σ+45 - -45) or (σVV-σ+45- -45) was 6 dB. This is because the body of the automobile comprises a number of smaller scattering objects yielding σ LL, either similar to the corner reflectors or asymmetrical to the radar boresight. Frequency-domain responses showed a number of notches caused by the interference between numerous reflecting waves having power levels of a similar order and different round-trip path lengths. Some representative reflective parts of the automobile were identified through analyses of time-domain responses.

This paper performs application-level QoS and user-level QoS assessment of audio-video streaming in cross-layer designed wireless ad hoc networks. In order to achieve high QoS at the user-level, we employ link quality-based routing in the network layer and media synchronization control in the application layer. We adopt three link quality-based routing protocols: OLSR-SS (Signal Strength), AODV-SS, and LQHR (Link Quality-Based Hybrid Routing). OLSR-SS is a proactive routing protocol, while AODV-SS is a reactive one. LQHR is a hybrid protocol, which is a combination of proactive and reactive routing protocols. For application-level QoS assessment, we performed computer simulation with ns-2 where an IEEE 802.11b mesh topology network with 24 nodes was assumed. We also assessed user-level QoS by a subjective experiment with 30 assessors. From the assessment results, we find AODV-SS the best for networks with long inter-node distances, while LQHR outperforms AODV-SS for short inter-node distances. In addition, we also examine characteristics of the three schemes with respect to the application-level QoS in random topology networks.

Recently, multimedia services are increasing with the widespread use of various wireless applications such as web browsers, real-time video, and interactive games, which results in traffic asymmetry between the uplink and downlink. Hence, time division duplex (TDD) systems which provide advantages in efficient bandwidth utilization under asymmetric traffic environments have become one of the most important issues in future mobile cellular systems. It is known that two types of intercell interference, referred to as crossed-slot interference, additionally arise in TDD systems; the performances of the uplink and downlink transmissions are degraded by BS-to-BS crossed-slot interference and MS-to-MS crossed-slot interference, respectively. The resulting performance unbalance between the uplink and downlink makes network deployment severely inefficient. Previous works have proposed intelligent time slot allocation algorithms to mitigate the crossed-slot interference problem. However, they require centralized control, which causes large signaling overhead in the network. In this paper, we propose to change the shape of the cellular structure itself. The conventional cellular structure is easily transformed into the proposed cellular structure with distributed receive antennas (DRAs). We set up statistical Markov chain traffic model and analyze the bit error performances of the conventional cellular structure and proposed cellular structure under asymmetric traffic environments. Numerical results show that the uplink and downlink performances of the proposed cellular structure become balanced with the proper number of DRAs and thus the proposed cellular structure is notably cost-effective in network deployment compared to the conventional cellular structure. As a result, extending the conventional cellular structure into the proposed cellular structure with DRAs is a remarkably cost-effective solution to support asymmetric traffic environments in future mobile cellular systems.