This paper investigates the behavior of one-dimensional discrete-time binary cellular neural networks with both the A- and B-templates and gives the necessary and sufficient conditions for the above network to be stable for unspecified fixed boundaries.

This paper presents a new operation and maintenance system for PON (Passive Optical Network) subscriber loops and an assessment of its feasibility through experiments. This system adopts a broadband continuous wave light source as a testing signal and a fiber grating filter as a reflective component. The fiber grating filter is inserted somewhere in each subscriber loop for reflection of the testing signal. Our results show that the proposed system operates well for the purposes of quick decision of loop state and easy testing for PON subscriber loops.

Scattering of a plane wave obliquely incident on a meteor trail is studied using the full wave treatment by treating the trail as a stratified column which has Gaussian radial electron distribution. Due to the coupling of the fields, the coupled equations have to be solved simultaneously. They are treated in matrix form, so the uncoupled and the coupled components can be distinguished. Based on the oblique scattering geometry, the effects of the variation of the communication range and the trail orientation are investigated. In the case of the variation of the communication range, results are in accordance with the approximate models but they are in contrast in the case of the variation of the trail orientation. Calculated waveforms are compared with the experimental echo shapes. It is found that they are in good agreement with each other. Furthermore, a duration comparison indicates that the electron line densities of most of the received signals are in the transition region.

In this paper we analyze an asymptotic stability of nonlinear singularly perturbed systems and propose a composite control with gain scheduling where the fast controller is the gain scheduled controller and the slow state plays a role of slowly varying parameters in gain scheduling. Specifically, the slow controller is designed by the slow manifold to stabilize the reduced slow system. As a result, the slow manifold of the system is the same as the designed manifold.

Since the penetration of VSAT services is rapidly increasing, more earth stations will operate around airports than is currently true. This makes it essential to evaluate accurately and efficiently the impairment of received signals due to blockage by aircraft. This paper proposes developing an aircraft model using a thin, planar polygon to represent the aircraft projection and to apply GTD with corner diffraction terms. The effectiveness and applicability of the method is then examined numerically. It is demonstrated that the results measured in the Ku-band around two airports are a good match with the numerical simulations even when the distance between the aircraft and the stations is small.

This paper chronicles the leaky-mode leakages in a corner-fed square patch. First, the measured peak RPA (relative power absorbed, 1-|S11|2-|S21|2) values of the two-port corner-fed square patch (two-port test circuit) are reported. These are 21.1%, 52.3%, 89.8% and 81.3% at 5.68 GHz, 11.76 GHz, 16.68 GHz and 22.29 GHz, respectively. Such periodicity of frequencies and the phenomenon of increasing losses at higher frequencies enable us to link these peak frequencies to leaky-mode excitations. The modal spectra of the higher-order leaky modes with a strip width of 630 mil, equal to the side length of the square patch, are obtained by the well-known space-domain integral equation method. The maximum available power gain (GA,max), obtained by simultaneously complex conjugate matched impedance at the referenced two ports of the test circuit, depicts that (1) nearly loss-free transmission parameter outside the leaky-mode regions and (2) substantial losses inside the leaky-mode regions. This result suggests that the leaky modes are the main sources causing losses for the two-port test circuit. Furthermore, the valley points of the measured and theoretical GA,max are about -7.5 dB, -9.7 dB and -12.0 dB at 10.13 GHz, 16.68 GHz and 22.29 GHz, respectively, and all are in the leaky-mode regions of the modal spectra. The one-port properties of the two-port patch with the second port opened are then investigated. The degenerated (0,N) and (N,0) modes (N=1, 2, 3 and 4), calculated by the cavity model method, fall into the strong leakage regions from the first to the fourth higher-order leaky modes. The well-known leaky line's frequency-scanning characteristics also appear in the one-port test circuit, with the angle of the main beam moving from θ=30 to θ=40 as the operating frequency is increased from 22.50 GHz to 23.75 GHz. Lastly, a two-dimensional (2-D) transmission-line model of the one-port test circuit is proposed. This model uses two orthogonal modal currents as excitations to stimulate the corner-fed square patch. At 22.60 GHz, in the fourth higher-order leaky mode (EH4) region, the current distributions obtained by the 2-D transmission-line model closely agree with those of the full-wave simulation. This consistency shows that the damped-oscillation current distributions of the corner-fed square patch at 22.60 GHz are caused significantly by the multiple reflections of the leaky mode. Furthermore, at the resonant frequencies of the patch, the tangled bound-mode resonance of the EH0 mode can enhance the leaky-mode leakages.

In this paper, we present an efficient VLSI architecture for the stand-alone application of a speech recognition system based on discriminative Bayesian neural network (DBNN). Regarding the recognition phase, the architecture of the Bayesian distance unit (BDU) is constructed first. In association with the BDU, we propose a template-serial architecture for the path distance accumulation to perform the recognition procedure. A corresponding architecture is also developed to accelerate the discriminative training procedure. It contains the intelligent look-up table for the sigmoid function. In comparison to the traditional one-table method, the memory size reduces drastically with only slight loss of accuracy. Combining the proposed hardware accelerators with the cost efficient programmable core, we took the most out of both programmable and application-specific architectures, including performance, design complexity, and flexibility.

In this paper, we propose a novel higher order time-frequency distribution (GDH) for a discrete time signal. This distribution is defined over the original discrete time-frequency grids through a delicate discretization of an equivalent expression of a higher order distribution, for a continuous time signal, in [4]. We also present a constructive design method, for the kernel of the GDH, by which the distribution satisfies (i) the alias free condition as well as (ii) the marginal conditions. Numerical examples show that the proposed distributions reasonably suppress the artifacts which are observed severely in the Wigner distribution and its simple higher order generalization.

A novel formulation for the Scalar-field approach of Integral Equation formulation of the Measured Equation of Invariance (SIE-MEI) is derived from the scalar reciprocity relation to solve the scalar Helmholtz equation. The basics of this formulation are similar to IE-MEI method for the electromagnetic (EM) problem. The surface integral equation is derived from reciprocity relation and on-surface MEI postulates are used. As a result it generates a sparse linear system with the same number of unknowns as of Boundary Element Method (BEM) and keeps the merits in minimum storage memory requirements and CPU time consumption for computing the final matrix. IE-MEI method has been proposed for two-dimensional (2D) electromagnetic problem, but three-dimensional (3D) problem is very difficult to be extend. This scalar-field approach of IE-MEI method is identical to electromagnetic in 2D, but easily extended to the 3D scalar-field scattering problem contrary to EM problem. The numerical results of sphere and cube are verified with some rigorous or numerical solutions, which give excellent agreement.

The performances of M-ary PSK (MPSK) and QAM (MQAM) systems using L-branch selection combining (SC) diversity reception in frequency-nonselective slow Nakagami fading channels are derived theoretically. For integer values of the Nakagami fading parameter m, the general formula for evaluating symbol error rate (SER) of MPSK signals in the independent branch diversity system comprises numerical analyses with the integral-form expressions. An exact closed-form SER performance of MQAM signals under the effect of SC diversity via numerical integration is presented.

This paper suggests that a watermarking technique based on the number theoretic transform (NTT) may effectively be employed for detecting alterations on lossless digital master images. Due to its fragility, the NTT-based technique is sensitive to detecting alterations, compared with that based on the discrete Fourier transform (DFT).

This letter proposes a packet length-based group-wise transmission (LGT) rate scheduling scheme for non-real time data service for the uplink of direct sequence code division multiple access (DS/CDMA) system using the burst switching scheme to support the integrated voice/data service. The LGT scheme optimally determines two different rate groups and their optimal data rates so as to minimize the average packet transmission delay. It has shown that the packet transmission delay performance can be significantly improved over the conventional single-rate packet transmission scheme for integrated voice/data service. Furthermore, a main feature of the proposed scheme is simplicity in its implementation.

In this paper, we present new stability conditions for a class of large-scale hybrid dynamical systems composed of a number of interconnected hybrid subsystems. The stability conditions are given in terms of discontinuous Lyapunov functions of the stable hybrid subsystems. Furthermore, the stability conditions are represented by LMIs (Linear Matrix Inequalities) which are computationally tractable.

Reactive near field reflection characteristics of commercial RF absorbers are investigated to determine the minimum size of a reactive-field anechoic box necessary for measuring the reactive near field of an ESPAR antenna. The reflectivity of the absorber placed in close proximity to an antenna is inversely proportional to the distance between the antenna and the absorber. For carbon filled urethane foam tapered absorbers, we find that the backscattered reflection characteristics mainly depend on their tapered height rather than the thickness of absorber base. As a result, we show that carbon filled urethane foam pyramidal and wave surface shaped absorbers can be used to make reactive-field anechoic boxes. A prototype of a reactive-field anechoic box is presented and the distance from the absorber to the antenna is reduced to a wavelength. The prototype is verified by comparing its performance with that obtained from a large anechoic chamber.

This paper describes a single-chip RF transce-iver LSI for 2.4-GHz-band Bluetooth applications. This chip uses a 0.5 µm BiCMOS process, which provides 23 GHz fT. The LSI consists of almost all the required RF and IF building blocks--a power amplifier (PA), a low noise amplifier (LNA), an image rejection mixer (IRM), channel-selection filters, a limiter, a received signal strength indicator (RSSI), a frequency discriminator, a voltage controlled oscillator (VCO), and a phase-locked loop (PLL) synthesizer. The transceiver consumes 34.4 mA in TX mode (PA, VCO, PLL) and 44.0 mA in RX mode (LNA, IRM, channel-selection filters, limiter, RSSI, frequency discriminator, VCO, PLL). Direct-up conversion with a frequency doubler is used for the TX architecture. In order to avoid the VCO pulling, we used a 1.2 GHz VCO with the frequency doubler. In the receiver section, a low-IF single conversion RX architecture is employed for the integration of the channel-selection filters. The transceiver has a proposed linear frequency discriminator with a wide input range. The wide input-frequency range discriminator is required to realize the lower IF RX architecture because of the higher ratio of frequency deviation to the center IF frequency. The discriminator is the delay line type, and consists of a mixer and a delay line circuit with a locked loop. The delay line connects to one input terminal of the mixer. By using the delay locked at one fourth of the period of the IF frequency, a quadrature phase shift IF signal is applied to the mixer input terminal. For the frequency discriminator, the DC output voltage changes in proportion to the input frequency and a wide input range is achieved. This RF transceiver sufficiently satisfies all the target specifications for short-range Bluetooth applications. By using this chip, a -80 dBm sensitivity is obtained for the 10-3 BER, and the transceiver can deliver an output power of over 0.0 dBm.

A method is described for improving cooperation in supervisory control and data acquisition (SCADA) systems that uses multi-agent (MA) intelligent field terminals (IFTs). The MA function of each IFT evaluates the control conditions of the overall system and the conditions of the other IFTs. To shorten the turn-around time for data transfer among IFTs, the conflicts that occur when the data processed by different IFTs is inconsistent or irregular are cooperatively and autonomously resolved by predictive agents incorporated into each IFT. Experimental results showed that this method not only provides adequate control but also reduces the load on the network and the turn-around time when the number of IFTs is less than 30.

In this letter a low-complexity and low-power realization of the 2D discrete-cosine-transform and its inverse (DCT/IDCT) is presented. A VLSI circuit based on the Chen algorithm with the distributed arithmetic approach is described. Furthermore low-power design techniques, based on clock gating and data driven switching activity reduction, are used to decrease the circuit power consumption. To this aim, input signal statistics have been extracted from H.263/MPEG verification models. Finally, circuit performance is compared to known software solutions and dedicated full-custom ones.

For wireless communication, a low-voltage monolithic LC-tank CMOS voltage-controlled-oscillator (VCO) is developed with 0.2-µm fully-depleted silicon-on-insulator (SOI) CMOS process technology. The VCO features a double-tuning technique to achieve a wide tuning range with lateral p-n junction varactors. The VCO has the following features at the supply voltage of 1.5 V: (1) Output frequency range from 1.07 GHz to 1.36 GHz, (2) Third-harmonic below -37 dBc, and (3) Phase noise of -120 dBc/Hz at 1 MHz offset frequency.

This paper investigates the cell search time performance of our previously proposed three-step cell search method in a two-cell site environment by laboratory and field experiments supporting asynchronous cell site operation, which is one of the most notable features of wideband direct sequence code division multiple access (W-CDMA) mobile communications. The cell search methods used in the paper are based on the ongoing third generation partnership project (3GPP), in which our original scheme was refined with respect to several points in order to reduce the complexity of the receiver. The experimental results demonstrate that the method achieves the fast cell search time of less than one second in real multipath-fading channels. The cell search is accomplished in less than approximately 700 msec at 90% of the detection probability when 4.7% and 0.5% of the total transmit power of a cell site is assigned to the common pilot channel (CPICH) and synchronization channels (SCHs), respectively, in a two-cell site environment. We also elucidate that the cell search time at the detection probability of 90% using time switched transmit diversity (TSTD) is decreased by approximately 100 msec compared to that without TSTD in low-mobility environments such as the average vehicular speed of 5 km/h with a transmit power assignment of the CPICH of 4.7%.

This paper proposes an innovative Pipeline-based Maximal-sized Matching scheduling approach, called PMM, for input-buffered switches. It dramatically relaxes the limitation of a single time slot for completing a maximal matching into any number of time slots. In the PMM approach, arbitration is operated in a pipelined manner, where K subschedulers are used. Each subscheduler is allowed to take more than one time slot for its matching. Every time slot, one of the subschedulers provides the matching result. We adopt an extended version of Dual Round-Robin Matching (DRRM), called iterative DRRM (iDRRM), as a maximal matching algorithm in a subscheduler. PMM maximizes the efficiency of the adopted arbitration scheme by allowing sufficient time for the number of iterations. We show that PMM preserves 100% throughput under uniform traffic and fairness for best-effort traffic of the non-pipelined adopted algorithm, while ensuring that cells from the same virtual output queue (VOQ) are transmitted in sequence. In addition, we confirm that the delay performance of PMM is not significantly degraded by increasing the pipeline degree, or the number of subschedulers, when the number of outstanding requests for each subscheduler from a VOQ is limited to 1.