We show measurement results of variation-tolerance of an error-hardened dual-modular-redundancy flip-flop fabricated in a 65-nm process. The proposed error-hardened FF called BCDMR is very strong against soft errors and also robust to process variations. We propose a shift-register-based test structure to measure variations. The proposed test structure has features of constant pin count and fast measurement time. A 65 nm chip was fabricated including 40k FFs to measure variations. The variations of the proposed BCDMR FF are 74% and 55% smaller than those of the conventional BISER FF on the twin-well and triple-well structures respectively.

The aim of this study is to improve the accuracy of flicker parameters estimation in old film sequences in which moving objects are present. Conventional methods tend to fail in flicker parameters estimation due to the effects of moving objects. Our proposed method firstly utilizes an adaptive Gaussian mixture model (GMM)-based method to detect the moving objects in the film sequences, and combines the detected results with the histogram-matched frames to generate reference frames for flicker parameters estimation. Then, on the basis of a linear flicker model, the proposed method uses an M-estimator with the reference frames to estimate the flicker parameters. Experimental results show that the proposed method can effectively improve the accuracy of flicker parameters estimation when the moving objects are present in the film sequences.

In the near future, interconnection networks of massively parallel computer systems will connect more than a hundred thousands of computing nodes. The performance evaluation of the interconnection networks can provide real insights to help the development of efficient communication library. Hence, to evaluate the performance of such interconnection networks, simulation tools capable of modeling the networks with sufficient details, supporting a user-friendly interface to describe communication patterns, providing the users with enough performance information, completing simulations within a reasonable time, are a real necessity. This paper introduces a novel interconnection network simulator NSIM, for the evaluation of the performance of extreme-scale interconnection networks. The simulator implements a simplified simulation model so as to run faster without any loss of accuracy. Unlike the existing simulators, NSIM is built on the execution-driven simulation approach. The simulator also provides a MPI-compatible programming interface. Thus, the simulator can emulate parallel program execution and correctly simulate point-to-point and collective communications that are dynamically changed by network congestion. The experimental results in this paper showed sufficient accuracy of this simulator by comparing the simulator and the real machine. We also confirmed that the simulator is capable of evaluating ultra large-scale interconnection networks, consumes smaller memory area, and runs faster than the existing simulator. This paper also introduces a simulation service built on a cloud environment. Without installing NSIM, users can simulate interconnection networks with various configurations by using a web browser.

In the Long-Term Evolution (LTE)-Advanced downlink, a user-specific demodulation reference signal (DM-RS) is used to support channel estimation and data demodulation for user-transparent multi-antenna and/or multi-point (MA/P) transmission techniques. A hybrid code division multiplexing (CDM) and frequency division multiplexing (FDM) scheme is adopted as a DM-RS multiplexing scheme for up to eight data streams per user. A time-domain orthogonal cover code (OCC) is used for CDM since time domain orthogonality among OCCs offers good robustness against channel variation. However, in a medium-to-high mobility environment, orthogonality distortion occurs among OCCs, which results in performance degradation. In this paper, we propose a two-dimensional (2D)-OCC mapping that achieves two-dimensional orthogonality in the time and frequency domains to improve the performance of CDM-based DM-RSs while reducing the peak transmission power of the OFDM symbol which includes the DM-RSs. Simulation results show that the proposed 2D-OCC mapping is effective in improving the block error rate performance especially in medium-to-high mobility environments. Furthermore, it is shown that the 2D-OCC mapping effectively reduces the peak power compared to the time-domain OCC mapping.

In spectrum sensing, if the primary user (PU) signal and the channel noise both follow Gaussian distribution and neither of their probability distribution functions (PDFs) are known, the traditional approaches based on entropy or Likelihood Ratio Test (LRT) etc., become infeasible. To address this problem, we propose a spectrum sensing method that exploits the similarity of PDFs of two time-adjacent detected data sets with cross entropy, while accounting for achieving the detection performance of LRT which is Neyman-Pearson optimal in detecting the primary user. We show that the detection performance of the proposed method asymptotically approximates that of LRT in detecting the PU. The simulation results confirm our analysis.

In heterogeneous cellular networks (HCN), which consists of macrocells and picocells, efficient interference management schemes between macrocells and picocells are crucial to the overall system performance. We propose a dynamic cooperative silencing (DCS) scheme for intercell interference control (ICIC). It is a low-complexity, low-feedback and distributed algorithm using only strongly interfered neighboring user information. A system simulation shows that the system performance and in particular the cell-edge throughput is significantly increased with the proposed silencing scheme.

In the fourth generation mobile communication system, the frequency band higher than the bands already used for IMT-2000 has been assigned. However, the higher radio frequency increases the propagation loss. To cope with the propagation loss, relay transmission has been investigated. In this paper, a transmission diversity scheme with frequency offset in amplify-and-forward (AF) relaying is proposed. In this scheme, the frequency of the OFDM signal is shifted at the relay station. A different amount of frequency offset is given in each relay station and the signals from the relay stations are separated and combined by MMSE detection at the base station. The numerical results obtained through computer simulation show that diversity is realized and the BER performance is improved by 1-2 dB at the BER of 10-2. When the number of the RSs increases, more BER improvement is achieved.

In recent Printed Circuit Boards (PCB), the design size and density have increased, and the improvement of routing tools for PCB is required. There are several routing tools which generate high quality routing patterns when connection requirement can be realized by horizontal and vertical segments only. However, in high density PCB, the connection requirements cannot be realized when only horizontal and vertical segments are used. Up to one third nets can not be realized if no non-orthogonal segments are used. In this paper, a routing method for a single-layer routing area that handles higher density designs in which 45-degree segments are used locally to relax the routing density is introduced. In the proposed method, critical zones in which non-orthogonal segments are required in order to realize the connection requirements are extracted, and 45-degree segments are used only in these zones. By extracting minimal critical zones, the other area that can be used to improve the quality of routing pattern without worry about connectivity issues is maximized. Our proposed method can utilize the routing methods which generate high quality routing pattern even if they only handle horizontal and vertical segments as subroutines. Experiments show that the proposed method analyzes a routing problem properly, and that the routing is realized by using 45-degree segments effectively.

The digital logic rewiring technique has been shown to be one of the most powerful logic transformation methods. It has been proven that rewiring is able to further improve some already excellent results on many EDA problems, ranging from logic minimization, partitioning, FPGA technology mappings to final routings. Previous studies have shown that ATPG-based rewiring is one of the most powerful tools for logic perturbation while a graph-based rewiring engine is able to cover nearly one fifth of the target wires with 50 times runtime speedup. For some problems that only require good-enough and very quick solutions, this new rewiring technique may serve as a useful and more practical alternative. In this work, essential elements in graph-based rewiring such as rewiring patterns, pattern size and locality, etc., have been studied to understand their relationship with rewiring performance. A structural analysis on the target-alternative wire pairs discovered by ATPG-based and graph-based engines has also been conducted to analyze the structural characteristics that favor the identification of alternative wires. We have also developed a hybrid rewiring approach that can take the advantages from both ATPG-based and graph-based rewiring. Experimental results suggest that our hybrid engine is able to achieve about 50% of alternative wire coverage when compared with the state-of-the-art ATPG-based rewiring engine with only 4% of the runtime. Through applying our hybrid rewiring approach to the FGPA technology mapping problem, we could achieve similar depth level and look-up table number reductions with much shorter runtime. This shows that the fast runtime of our hybrid approach does not sacrifice the quality of certain rewiring applications.

To estimate the field emission current associated with an array of carbon nanowalls (CNWs), the model of the floating rods between anode and cathode plates was proposed. An approximate formula for the enhancement factor was derived, showing that the interwall distance of the CNW array critically affects the field emission. The field enhancement factor was almost one order of magnitude less than that of vertically aligned CNTs. Considering the field emission current density, the field emission can be optimized when the interwall distance is comparable with the wall height. For same separation distance, the macroscopic field strength of the CNW array is almost one order of magnitude higher than that of vertical CNT array to obtain the emission current of 1 mA from the cathode surface of 1 cm2.

We propose a novel technique to grow the single-walled carbon nanotubes (SWNTs) with specific chirality at the desired position using free electron laser (FEL) irradiation during growth and surface treatment. As a result, only the semiconducting SWNTs grew at the area between triangle electrodes, where the ozone treatment was done to be hydrophilic when an alcohol chemical vapor deposition (ACCVD) process was carried out with the 800 nm FEL irradiation. Although the number of possible chiral index is 22 in the SWNTs grown without the FEL irradiation, the number is much reduced to be 8 by the FEL.

With advances in communication technologies, network services provided via the Internet have become widely diversified, and people can use these services not only via wired networks but also via wireless networks. There are several wireless systems in practical use such as cellular, WiMAX and WiFi. Although these wireless network systems have developed independently of each other, they should be integrated for seamless access by users. However, each system uses an individual spectrum prescribed by law to avoid radio interference. To overcome such a situation, dynamic spectrum access technology is receiving much attention. We propose a dynamic spectrum assignment method in which a WiFi system temporarily uses a spectrum band of the WiMAX system in WiFi/WiMAX integrated networks to reduce call blocking probability of multimedia communication services. We confirm the effectiveness of the proposed method by simulation experiments.

Secrecy on the physical layer is receiving increased research interest due to its theoretical and practical importance. In this letter, a subcarrier allocation scheme is proposed for physical-layer security in cooperative orthogonal frequency division multiple access (OFDMA) networks that use the Amplify-and-Forward (AF) strategy. We consider the subcarrier pairing and assignment to maximize overall system rates subject to a secrecy level requirement. Monte Carlo simulations are carried out to validate our analysis.

WSNs (Wireless Sensor Networks) are becoming more widely used in various fields, and localization is a crucial and essential issue for sensor network applications. In this letter, we propose a low-complexity localization mechanism for WSNs that operate in 3D (three-dimensional) space. The basic idea is to use aerial vehicles that are deliberately equipped with anchor nodes. These anchors periodically broadcast beacon signals containing their current locations, and unknown nodes receive these signals as soon as the anchors enter their communication range. We estimate the locations of the unknown nodes based on the proposed scheme that transforms the 3D problem into 2D computations to reduce the complexity of 3D localization. Simulated results show that our approach is an effective scheme for 3D self-positioning in WSNs.

In most existing warships combat simulation system, the tactics of a warship is manipulated by human operators. For this reason, the simulation results are restricted due to the capabilities of human operators. To deal with this, we have employed the genetic algorithm for supporting the evolutionary simulation environment. In which, the tactical decision by human operators is replaced by the human model with a rule-based chromosome for representing tactics so that the population of simulations are created and hundreds of simulation runs are continued on the basis of the genetic algorithm without any human intervention until finding emergent tactics which shows the best performance throughout the simulation. Several simulation tests demonstrate the techniques.

This paper presents a step-up/step-down DC-DC converter using a digital dither technique to achieve high efficiency and small output voltage ripple for portable electronic devices. The proposed control method minimizes not only the switching loss by operating like a pure buck or boost converter, but also the conduction loss by reducing the average inductor current even when four switches are used. Digital dither control is introduced to implement a buffer region for smooth transition between buck and boost modes. A minimum ripple dither with higher fundamental frequency is adopted to decrease the output voltage ripple. A window delay-line analog to digital converter (ADC) with delay calibration is achieved to digitalize the control voltage. The step-up/step-down DC-DC converter has been designed with a standard 0.5 µm CMOS process. The output voltage is regulated within the input voltage ranged from 2.5 V to 5.5 V, and the output voltage ripple is reduced to less than 25 mV during the mode transition. The peak power efficiency is 96%, and the maximum load current can reach 800 mA.

Object tracking is a major technique in image processing and computer vision. Tracking speed will directly determine the quality of applications. This paper presents a parallel implementation for a recently proposed scale- and rotation-invariant on-line object tracking system. The algorithm is based on NVIDIA's Graphics Processing Units (GPU) using Compute Unified Device Architecture (CUDA), following the model of single instruction multiple threads. Specifically, we analyze the original algorithm and propose the GPU-based parallel design. Emphasis is placed on exploiting the data parallelism and memory usage. In addition, we apply optimization technique to maximize the utilization of NVIDIA's GPU and reduce the data transfer time. Experimental results show that our GPGPU-based method running on a GTX480 graphics card could achieve up to 12X speed-up compared with the efficiency equivalence on an Intel E8400 3.0 GHz CPU, including I/O time.

In this paper, we propose a hybrid test application in partial skewed-load (PSL) scan design. The PSL scan design in which some flip-flops (FFs) are controlled as skewed-load FFs and the others are controlled as broad-side FFs was proposed in [1]. We notice that the PSL scan design potentially has a capability of two test application modes: one is the broad-side test mode, and the other is the hybrid test mode which corresponds to the test application considered in [1]. According to this observation, we present a hybrid test application of the two test modes in the PSL scan design. In addition, we also address a way of skewed-load FF selection based on propagation dominance of FFs in order to take advantage of the hybrid test application. Experimental results for ITC'99 benchmark circuits show that the hybrid test application in the proposed PSL scan design can achieve higher fault coverage than the design based on the skewed-load FF selection [1] does.

Coordinated multi-point processing at multiple base stations can improve coverage, system throughput, and cell-edge throughput for future cellular systems. In this paper, we study the coordinated reception of transmitted signals at multiple MIMO base stations to exploit cooperative diversity. In particular, we propose to employ cooperative multicell automatic repeat request (ARQ) protocol via backhaul links. The attractiveness of this protocol is that processing between coordinated base stations can be made completely transparent to the mobile user, and it improves the mobile user's link reliability and throughput significantly compared to noncooperative ARQ protocol. In our proposed protocol, we consider the scenario where the multicell processing involves one of the following three schemes: decode-and-forward, amplify-and-forward, and compress-and-forward schemes. We derive the average packet error rate and throughput for these cooperative multicell ARQ protocols. Numerical results show that the cooperative multicell ARQ protocols are promising in terms of average packet error rate and throughput. Furthermore, we show that the degree of improvement depends on the type of cooperative multicell ARQ protocol employed and the operating average signal-to-noise ratio of the main and backhaul links.

The interference rejection combining (IRC) receiver, which can suppress inter-cell interference, is effective in improving the cell-edge user throughput. The IRC receiver is typically based on the minimum mean square error (MMSE) criteria, which requires highly accurate channel estimation and covariance matrix estimation that includes the inter-cell interference. This paper investigates the gain from the IRC receiver in terms of the downlink user throughput performance in a multi-cell environment. In the evaluation, to assess the actual gain, the inter-cell interference signals including reference signals from the surrounding 56 cells are generated in the same way as the desired signals, and the channel propagation from all of the cells is explicitly taken into account considering pathloss, shadowing, and multipath fading. The results of simulations that assume the inter-site distance of 500 m, the spatial correlation at the transmitter and the receiver of 0.5, and the numbers of transmitter and receiver antennas of 2 and 2, respectively, show that the IRC receiver improves the cell-edge user throughput (defined as the 5% value in the cumulative distribution function) by approximately 15% compared to the simplified MMSE receiver that approximates the inter-cell interference as AWGN, at the cost of a drop in the average user throughput due to less accurate channel and covariance matrices. Furthermore, we consider dynamic switching between the IRC receiver and the simplified MMSE receiver according to the number of streams and modulation and coding scheme levels. The results show that with dynamic switching, both the cell-edge throughput and average user throughput are improved to the same level as that for the IRC receiver and the simplified MMSE receiver, respectively. Therefore, the best performance can be achieved by employing the dynamic switching in all throughput regions.