In this paper, we study the feasibility of a batteryless wireless sensor supplied with energy by using microwave power transmission (MPT). If we perform co-channel operation of MPT and wireless local area networks (WLANs) for the sake of spectral efficiency, a time division method for MPT and WLAN communications is required to avoid serious interference from MPT to WLAN data transmissions. In addition, to reduce the power consumption of a sensor, the use of power-save operation of the sensor is desirable. We proposed a scheduling scheme that allocates time for MPT and WLAN communications. Specifically, in the proposed scheduling system, an energy source transmits microwave power to a sensor station except when the sensor station transmits data frames or receives beacon frames. In addition, in the proposed scheduling system, we force the remaining energy of the sensor station to converge to a maximum value by adjusting the time interval of data transmission from the sensor station such that the power consumption of the sensor station is reduced. On the basis of the proposition, we implemented a scheduling system and then confirmed that it performed successfully in the conducted experiments. Finally, we discussed the feasibility of the proposed scheduling scheme by evaluating the coverage and then showed that the scheduling scheme can be applied to closed space or room.

Local descriptors, Local Binary Pattern (LBP) and Scale Invariant Feature Transform (SIFT) are widely used in various computer applications. They emphasize different aspects of image contents. In this letter, we propose to combine them in sparse coding for categorizing scene images. First, we regularly extract LBP and SIFT features from training images. Then, corresponding to each feature, a visual word codebook is constructed. The obtained LBP and SIFT codebooks are used to create a two-dimensional table, in which each entry corresponds to an LBP visual word and a SIFT visual word. Given an input image, LBP and SIFT features extracted from the same positions of this image are encoded together based on sparse coding. After that, spatial max pooling is adopted to determine the image representation. Obtained image representations are converted into one-dimensional features and classified by utilizing SVM classifiers. Finally, we conduct extensive experiments on datasets of Scene Categories 8 and MIT 67 Indoor Scene to evaluate the proposed method. Obtained results demonstrate that combining features in the proposed manner is effective for scene categorization.

It is known that the IP Multimedia Subsystem (IMS) provides various telecom services e.g., VoIP, instant messaging, and video conferencing. In the IMS, these services are provided with session initiation protocol (SIP) handled by call/session control function servers (CSCFs). Completing the SIP signaling call flow without delay is vital to provide satisfactory services to the users. For service continuity, previous studies redundantly synchronized session states of CSCFs with backup servers. This paper proposes an IMS restoration system that selectively stores the session states. This is achieved by utilizing the retransmission mechanism of SIP. Time-based simulation emulating the process of backup servers shows that the proposed system reduces the number of backup servers to less than 38% compared to the previous studies, without degrading the service quality.

We discuss the division of radio resources in the time and frequency domains for wireless local area network (WLAN) devices powered with microwave energy. In general, there are two ways to avoid microwave power transmission (MPT) from influencing data communications: adjacent channel operation of continuous MPT and WLAN data transmission and co-channel operation of intermittent MPT and WLAN data transmission. Experimental results reveal that, even when we implement these methods, several problems arise because WLAN devices have been developed without supposing the existence of MPT. One problem clarified in our experiment is that adjacent channel operation at 2.4GHz does not necessarily perform well owing to the interference from MPT. This interference occurs regardless of the frequency separation at 2.4GHz. The other problem is that intermittent MPT could result in throughput degradation owing to the data rate control algorithm and the association scheme of the WLAN. In addition, the experimental results imply that a microwave energy source and a WLAN device should share information on the timings of intermittent MPT and data transmission to avoid buffer overflow.

Millimeter-wave synthetic aperture imaging radiometer (SAIR) is a powerful sensor for near-field high-resolution observations. However, the large receiver number and system complexity affect the application of SAIR. To overcome this shortage (receiver number), an accurate imaging algorithm based on compressed sensing (CS) theory is proposed in this paper. For reconstructing the brightness temperature images accurately from the sparse SAIR with fewer receivers, the proposed CS-based imaging algorithm is used to accomplish the sparse reconstruction with fewer visibility samples. The reconstruction is performed by minimizing the $l_{1}$ norm of the transformed image. Compared to the FFT-based methods based on Fourier transform, the required receiver number can be further reduced by this method. The simulation results demonstrate that the proposed CS-based method has higher reconstruction accuracy for the sparse SAIR.

This paper presents a mechanism for detecting dynamic loop and procedure nesting during the actual program execution on-the-fly. This mechanism aims primarily at making better strategies for performance tuning or parallelization. Using a pre-compiled application executable machine code as an input, our mechanism statically generates simple but precise markers that indicate loop entries and loop exits, and dynamically monitors loop nesting that appears during the actual execution together with call context tree. To keep precise loop structures all the time, we monitor the indirect jumps that enter the loop regions and the setjmp/longjmp functions that cause irregular function call transfers. We also present a novel representation called Loop-Call Context Graph that can keep track of inter-procedural loop nests. We implement our mechanism and evaluate it using SPEC CPU2006 benchmark suite. The results confirm that our mechanism can successfully reveal the precise inter-procedural loop nest structures from all of SPEC CPU2006 benchmark executions without any particular compiler support. The results also show that it can reduce runtime loop detection overheads compared with the existing loop profiling method.

This paper presents a novel filter to keep from over-smoothing the edges and corners and rectify the outliers in the flow field after each incremental computation step, which plays a key role during the process of estimating flow field. This filter works according to the spatial-temporal derivatives distance of the input image and velocity field distance, whose principle is more reasonable in filtering mechanism for optical flow than other existing nonlinear filters. Moreover, we regard the spatial-temporal derivatives as new powerful descriptions of different motion layers or regions and give a detailed explanation. Experimental results show that our proposed method achieves better performance.

This paper presents a graph-based approach to designing arithmetic circuits over Galois fields (GFs) using normal basis representations. The proposed method is based on a graph-based circuit description called Galois-field Arithmetic Circuit Graph (GF-ACG). First, we extend GF-ACG representation to describe GFs defined by normal basis in addition to polynomial basis. We then apply the extended design method to Massey-Omura parallel multipliers which are well known as typical multipliers based on normal basis. We present the formal description of the multipliers in a hierarchical manner and show that the verification time can be greatly reduced in comparison with those of the conventional techniques. In addition, we design GF exponentiation circuits consisting of the Massey-Omura parallel multipliers and an inversion circuit over composite field GF(((22)2)2) in order to demonstrate the advantages of normal-basis circuits over polynomial-basis ones.

Feedback data loss can severely degrade overall system performance. In addition, it can affect the control and computation of the Cyber-physical Systems (CPS). CPS hold enormous potential for a wide range of emerging applications that include different data traffic patterns. These data traffic patterns have wide varieties of diversities. To recover various traffic patterns we need to know the nature of their underlying property. In this paper, we propose a data recovery framework for different traffic patterns of CPS, which comprises data pre-processing step. In the proposed framework, we designed a Data Pattern Analyzer to classify the different patterns and built a model based on the pattern as a data pre-processing step. Inside the framework, we propose a data recovery scheme, called Efficient Temporal and Spatial Data Recovery (ETSDR) algorithm to recover the incomplete feedback for CPS to maintain real time control. In this algorithm, we utilize the temporal model based on the traffic pattern and consider the spatial correlation of the nearest neighbor sensors. Numerical results reveal that the proposed ETSDR outperforms both the weighted prediction (WP) and the exponentially weighted moving average (EWMA) algorithms regardless of the increment percentage of missing data in terms of the root mean square error, the mean absolute error, and the integral of absolute error.

At present, vast numbers of information resources are available on the Internet. However, one emerging issue is how to search and exploit these information resources in an efficient and flexible manner with high scalability. In this study, we focused our attention on the design of a distributed hash table (DHT)-based search system that supports efficient scalable multi-attribute queries of information resources in a distributed manner. Our proposed system, named D-AVTree, is built on top of a ring-based DHT, which partitions a one-dimensional key space across nodes in the system. It utilizes a descriptive naming scheme, which names each resource using an attribute-value (AV) tree, and the resource names are mapped to d-bit keys in order to distribute the resource information to responsible nodes based on a DHT routing algorithm. Our mapping scheme maps each AV branch of a resource name to a d-bit key where AV branches that share a subsequence of AV pairs are mapped to a continuous portion of the key space. Therefore, our mapping scheme ensures that the number of resources distributed to a node is small and it facilitates efficient multi-attribute queries by querying only a small number of nodes. Further, the scheme has good compatibility with key-based load balancing algorithms for DHT-based networks. Our system can achieve both efficiency and a good degree of load balancing even when the distribution of AV pairs in the resource names is skewed. Our simulation results demonstrated the efficiency of our solution in terms of the distribution cost, query hit ratio, and the degree of load balancing compared with conventional approaches.

An accurate time-of-arrival (TOA) estimation method for isolated pulses positioning system is proposed in this paper. The method is based on a multi-level crossing timing (MCT) digitizer and least square (LS) criterion, namely LS-MCT method, in which TOA of the received signal is directly described as a parameterized combination of a set of MCT samples of the leading and trailing edges of the signal. The LS-MCT method performs a receiver training process, in which a GPS synchronized training pulse generator (TPG) is used to obtain training data and determine the parameters of the TOA combination. The LS method is then used to optimize the combination parameters with a minimization criterion. The proposed method is compared to the conventional TOA estimation methods such as leading edge level crossing discriminator (LCD), adaptive thresholding (ATH), and signal peak detection (PD) methods. Simulation results show that the proposed algorithm leads to lower sensitivity to signal-to-noise ratio (SNR) and attains better TOA estimation accuracy than available TOA methods.

Recently, radar resource management of multifunction radar is a challenging issue in electronically scanned array radar technology. This paper deals with radar beam scheduling, which is a core issue of radar resource management. This paper proposed stochastic scheduler algorithm using Simulated Annealing (SA) and Hybrid scheduler algorithm which automatically selects two different types of schedulers according to the radar load: Rule based scheduler using modified Butler algorithm for underload situations and SA based scheduler for overload situations. The proposed algorithms are evaluated in terms of scheduling latency, the number of scheduled tasks, and time complexity. The simulation results show that the performance of rule based scheduler is seriously degraded in overload situation. However, SA based scheduler and Hybrid scheduler have graceful performance degradation in overload situation. Compared with rule based scheduler, SA based scheduler and Hybrid scheduler can schedule many more tasks on time for the same operation duration in the overload situation. Even though their time complex is relatively high, it can be applied to real applications if the parameters are properly controlled. Especially, Hybrid scheduler has an advantage of low time complexity with good performance.

A new real-time sound field transmission system is presented. To construct this system, a large listening area needs to be reproduced at not less than a constant height. Additionally, the driving signals of the loudspeakers should be obtained only from received signals of microphones. Wave field reconstruction (WFR) filtering for linear arrays of microphones and loudspeakers is considered to be suitable for this kind of system. An experimental system was developed to show the feasibility of real-time sound field transmission using the WFR filter. Experiments to measure the reproduced sound field and a subjective listening test of sound localization were conducted to evaluate the proposed system. Although the reproduced sound field included several artifacts such as spatial aliasing and faster amplitude decay, the experimental results indicated that the proposed system was able to provide sound localization accuracy for virtual sound sources comparable to that for real sound sources in a large listening area.

For break arcs occurring between Ag and Ag/SnO$_2$ 12,wt% electrical contact pairs, the electrical conductivity, viscosity and specific heat at constant pressure are calculated as thermodynamic and transport properties. Mixture rates of contact material vapor are 0%, 1%, 10% and 100%. Influence of the contact material on the properties is investigated. Temperature for the calculation ranges from 2000,K to 20000,K. Following results are shown. When the mixture rate is changed, the electrical conductivity varies at lower temperature (< 10000,K), and the viscosity and specific heat vary widely at all temperature range. The electrical conductivity is independent of the mixture rate when the temperature is exceeding 10000,K. The thermodynamic and transport properties are independent of the kind of the contact materials.

A novel Two-dimensional Fuzzy Discriminant Locality Preserving Projections (2D-FDLPP) algorithm is proposed for learning effective subspace of two-dimensional images. The 2D-FDLPP algorithm is derived from the Two-dimensional Locality Preserving Projections (2D-LPP) by exploiting both fuzzy and discriminant properties. 2D-FDLPP algorithm preserves the relationship degree of each sample belonging to given classes with fuzzy k-nearest neighbor classifier. Also, it introduces between-class scatter constrain and label information into 2D-LPP algorithm. 2D-FDLPP algorithm finds the subspace which can best discriminate different pattern classes and weakens the environment factors according to soft assignment method. Therefore, 2D-FDLPP algorithm has more discriminant power than 2D-LPP, and is more suitable for recognition tasks. Experiments are conducted on the MNIST database for handwritten image classification, the JAFFE database and Cohn-Kanade database for facial expression recognition and the ORL database for face recognition. Experimental results reported the effectiveness of our proposed algorithm.

There has been increasing demand to research the measuring method to characterize the batch consistency of contact rivets. An automated test equipment has been described that makes it possible to measure the electrical contact resistance with high efficiency. The relationship between contact force and contact resistance during the loading and unloading process was measured explicitly using AgPd alloy, stainless steel and sapphire substrate material with Au coatings as sphere indenters separately. To explain the phenomena of contact resistance decreasing more slowly than the traditional theoretical results during loading, the indenter with coating and rivet are modeled by using the commercial FEM software COMSOL Multiphysics. Besides the constriction resistance, the transition region Au coating resistance and the bulk resistance of the substrate are deduced from the simulated current lines profiles and iso-potentials. The difference of electrical conductivity between indenter material and gold coating is the reason for the occurrence of the transition region.

In this paper, compact reconfigurable wideband Inverted-F Antenna (IFA) elements are proposed for a Long Term Evolution (LTE) mobile terminal. The proposed inverted-F antenna has a very simple planar arrangement. A capacitive coupling feed strip is employed to modify the input impedance matching. A chip inductor is connected in series to the feeding point to realize the wideband property. The whole Multiple-Input Multiple-Output (MIMO) antenna system consists of two similar inverted-F antenna elements. Antenna element #1 has a wideband property with a 6-dB bandwidth from 0.74 to 0.9GHz. To further expand the bandwidth, antenna element #2 has a reconfigurable property through the use of a Positive Intrinsic-Negative (PIN) diode. Antenna element #2 has a 6-dB bandwidth from 0.74 to 0.84GHz when the PIN diode is on and from 0.79 to 0.9GHz when the PIN diode is off. Moreover, the proposed MIMO antenna has a low radiation-pattern-based envelope correlation coefficient (ECC), which is less than 0.15 over LTE bands 4, 5, 13, and 14.

Since electromagnetic (EM) noise resulting from an arc discharge disturbs other electric devices, parameters on electromagnetic compatibility, as well as lifetime and reliability, are important properties for electrical contacts. To clarify the characteristics and the mechanism of the generation of the EM noise, the arc column and voltage fluctuations generated by slowly breaking contacts with external direct current (DC) magnetic field, up to 20,mT, was investigated experimentally using Ag$_{90.7{ m wt%}}$SnO$_{2,9.3{ m wt}%}$ material. Firstly the motion of the arc column is measured by high-speed camera. Secondary, the distribution of the motion of the arc and contact voltage are discussed. It was revealed that the contact voltage fluctuation in the arc duration is related to the arc column motion.

The excessively high temperature in a chip may cause circuit malfunction and performance degradation, and thus should be avoided to improve system reliability. In this paper, a novel oscillation-based on-chip thermal sensing architecture for dynamically adjusting supply voltage and clock frequency in System-on-a-Chip (SoC) is proposed. It is shown that the oscillation frequency of a ring oscillator reduces linearly as the temperature rises, and thus provides a good on-chip temperature sensing mechanism. An efficient Dynamic Voltage-to-Frequency Scaling (DF2VS) algorithm is proposed to dynamically adjust supply voltage according to the oscillation frequencies of the ring oscillators distributed in SoC so that thermal sensing can be carried at all potential hot spots. An on-chip Dynamic Voltage Scaling or Dynamic Voltage and Frequency Scaling (DVS or DVFS) monitor selects the supply voltage level and clock frequency according to the outputs of all thermal sensors. Experimental results on SoC benchmark circuits show the effectiveness of the algorithm that a 10% reduction in supply voltage alone can achieve about 20% power reduction (DVS scheme), and nearly 50% reduction in power is achievable if the clock frequency is also scaled down (DVFS scheme). The chip temperature will be significant lower due to the reduced power consumption.

We present a new lower bound on the number of gates in reversible logic circuits that represent a given reversible logic function, in which the circuits are assumed to consist of general Toffoli gates and have no redundant input/output lines. We make a theoretical comparison of lower bounds, and prove that the proposed bound is better than the previous one. Moreover, experimental results for lower bounds on randomly-generated reversible logic functions and reversible benchmarks are given. The results also demonstrate that the proposed lower bound is better than the former one.