Blockchain is one of the prominent rapidly used technology in the last decade in various applications. In recent years, many researchers explored the capabilities of blockchain in smart IoT to address various security challenges. Integration of IoT and blockchain solves the security problems but scalability still remains a huge challenge. To address this, various AI techniques can be applied in the blockchain IoT framework, thus providing an efficient information system. In this survey, various works pertaining to the domains which integrate AI, IoT and Blockchain has been explored. Also, this article discusses potential industrial use cases on fusion of blockchain, AI and IoT applications and its challenges.

Convolutional approximate message-passing (CAMP) is an efficient algorithm to solve linear inverse problems. CAMP aims to realize advantages of both approximate message-passing (AMP) and orthogonal/vector AMP. CAMP uses the same low-complexity matched-filter as AMP. To realize the asymptotic Gaussianity of estimation errors for all right-orthogonally invariant matrices, as guaranteed in orthogonal/vector AMP, the Onsager correction in AMP is replaced with a convolution of all preceding messages. CAMP was proved to be asymptotically Bayes-optimal if a state-evolution (SE) recursion converges to a fixed-point (FP) and if the FP is unique. However, no proofs for the convergence were provided. This paper presents a theoretical analysis for the convergence of the SE recursion. Gaussian signaling is assumed to linearize the SE recursion. A condition for the convergence is derived via a necessary and sufficient condition for which the linearized SE recursion has a unique stationary solution. The SE recursion is numerically verified to converge toward the Bayes-optimal solution if and only if the condition is satisfied. CAMP is compared to conjugate gradient (CG) for Gaussian signaling in terms of the convergence properties. CAMP is inferior to CG for matrices with a large condition number while they are comparable to each other for a small condition number. These results imply that CAMP has room for improvement in terms of the convergence properties.

This paper presents examination result of possibility for automatic unclear region detection in the CAD system for colorectal tumor with real time endoscopic video image. We confirmed that it is possible to realize the CAD system with navigation function of clear region which consists of unclear region detection by YOLO2 and classification by AlexNet and SVMs on customizable embedded DSP cores. Moreover, we confirmed the real time CAD system can be constructed by a low power ASIC using customizable embedded DSP cores.

Recently, channel-aware steganography has been presented for high security. The corresponding selection-channel-aware (SCA) detecting algorithms have also been proposed for improving the detection performance. In this paper, we propose a novel detecting algorithm of JPEG steganography, where the embedding probability and block evaluation are integrated into the new probability. This probability can embody the change due to data embedding. We choose the same high-pass filters as maximum diversity cascade filter residual (MD-CFR) to obtain different image residuals and a weighted histogram method is used to extract detection features. Experimental results on detecting two typical steganographic methods show that the proposed method can improve the performance compared with the state-of-art methods.

In recent years, several reversible contrast-enhancement methods for color images using digital watermarking have been proposed. These methods can restore an original image from a contrast-enhanced image, in which the information required to recover the original image is embedded with other payloads. In these methods, the hue component after enhancement is similar to that of the original image. However, the saturation of the image after enhancement is significantly lower than that of the original image, and the obtained image exhibits a pale color tone. Herein, we propose a method for enhancing the contrast and saturation of color images and nearly preserving the hue component in a reversible manner. Our method integrates red, green, and blue histograms and preserves the median value of the integrated components. Consequently, the contrast and saturation improved, whereas the subjective image quality improved. In addition, we confirmed that the hue component of the enhanced image is similar to that of the original image. We also confirmed that the original image was perfectly restored from the enhanced image. Our method can contribute to the field of digital photography as a legal evidence. The required storage space for color images and issues pertaining to evidence management can be reduced considering our method enables the creation of color images before and after the enhancement of one image.

Global software engineering education faces unique challenges to reflect as close as possible real-world distributed team development in various forms. The complex nature of planning, collaborating, and upholding partnerships present administrative difficulties on top of budgetary constrains. These lead to limited opportunities for students to gain international experiences and for researchers to propagate educational and practical insights. This paper presents an empirical view on three different course structures conducted by the same research and educational team over a four-year time span. The courses were managed in Japan and Germany, facing cultural challenges, time-zone differences, language barriers, heterogeneous and homogeneous team structures, amongst others. Three semesters were carried out before and one during the Covid-19 pandemic. Implications for a recent focus on online education for software engineering education and future directions are discussed. As administrational and institutional differences typically do not guarantee the same number of students on all sides, distributed teams can be 1. balanced, where the number of students on one side is less than double the other, 2. unbalanced, where the number of students on one side is significantly larger than double the other, or 3. one-sided, where one side lacks students altogether. An approach for each of these three course structures is presented and discussed. Empirical analyses and reoccurring patterns in global software engineering education are reported. In the most recent three global software engineering classes, students were surveyed at the beginning and the end of the semester. The questionnaires ask students to rank how impactful they perceive factors related to global software development such as cultural aspects, team structure, language, and interaction. Results of the shift in mean perception are compared and discussed for each of the three team structures.

Software developers often use a web search engine to improve work efficiency. However, web search strategies (e.g., frequently changing web search keywords) may be different for each developer. In this study, we attempted to define a better web search strategy. Although many previous studies analyzed web search behavior in programming, they did not provide guidelines for web search strategies. To suggest guidelines for web search strategies, we asked 10 subjects four questions about programming which they had to solve, and analyzed their behavior. In the analysis, we focused on the subjects' task time and the web search metrics defined by us. Based on our experiment, to enhance the effectiveness of the search, we suggest (1) that one should not go through the next search result pages, (2) the number of keywords in queries should be suppressed, and (3) previously used keywords must be avoided when creating a new query.

The Canonical Polyadic Decomposition (CPD) is the tensor analog of the Singular Value Decomposition (SVD) for a matrix and has many data science applications including signal processing and machine learning. For the CPD, the Alternating Least Squares (ALS) algorithm has been used extensively. Although the ALS algorithm is simple, it is sensitive to a noise of a data tensor in the applications. In this paper, we propose a novel strategy to realize the noise suppression for the CPD. The proposed strategy is decomposed into two steps: (Step 1) denoising the given tensor and (Step 2) solving the exact CPD of the denoised tensor. Step 1 can be realized by solving a structured low-rank approximation with the Douglas-Rachford splitting algorithm and then Step 2 can be realized by solving the simultaneous diagonalization of a matrix tuple constructed by the denoised tensor with the DODO method. Numerical experiments show that the proposed algorithm works well even in typical cases where the ALS algorithm suffers from the so-called bottleneck/swamp effect.

Coprime (pair of) DFT filter banks (coprime DFTFB), which process signals like a spectral analyzer in time domain, divides the power spectrum equally into MN bands by employing two DFT filter banks (DFTFBs) of size only M and N respectively, where M and N are coprime integers. With coprime DFTFB, frequencies in wide sense stationary (WSS) signals can be effectively estimated with a much lower sampling rates than the Nyquist rates. However, the imperfection of practical FIR filter and the correlation based detection mode give rise to two kinds of spurious peaks in power spectrum estimation, that greatly limit the application of coprime DFTFB. Through detailed analysis of the spurious peaks, this paper proposes a modified spectral analyzer based on dual coprime DFTFBs and sub-decimation, which not only depresses the spurious peaks, but also improves the frequency estimation accuracy. The mathematical principle proof of the proposed spectral analyzer is also provided. In discussion of simultaneous signals detection, an O-extended MN-band coprime DFTFB (OExt M-N coprime DFTFB) structure is naturally deduced, where M, N, and O are coprime with each other. The original MN-band coprime DFTFB (M-N coprime DFTFB) can be seen a special case of the OExt M-N coprime DFTFB with extending factor O equals ‘1’. In the numerical simulation section, BPSK signals with random carrier frequencies are employed to test the proposed spectral analyzer. The results of detection probability versus SNR curves through 1000 Monte Carlo experiments verify the effectiveness of the proposed spectrum analyzer.

We present a novel circularly polarized ring microstrip antenna and its design. The shorting pins discretely disposed on the inner edge of the ring microstrip antenna are introduced as a new degree of freedom for improving the resonance frequency control. The number and diameter of the shorting pins control the resonance frequency; the resonance frequency can be almost constant with respect to the inner/outer diameter ratio, which expands the use of the ring microstrip antenna. The dual-band antenna where the proposed antenna includes another ring microstrip antenna is designed and measured, and simulated results agree well with the measured one.

Active network monitoring based on Boolean network tomography is a promising technique to localize link failures instantly in transport networks. However, the required set of monitoring trails must be recomputed after each link failure has occurred to handle succeeding link failures. Existing heuristic methods cannot compute the required monitoring trails in a sufficiently short time when multiple-link failures must be localized in the whole of large-scale managed networks. This paper proposes an approach for computing the required monitoring trails within an allowable expected period specified beforehand. A random walk-based analysis estimates the number of monitoring trails to be computed in the proposed approach. The estimated number of monitoring trails are computed by a lightweight method that only guarantees partial localization within restricted areas. The lightweight method is repeatedly executed until a successful set of monitoring trails achieving unambiguous localization in the entire managed networks can be obtained. This paper demonstrates that the proposed approach can compute a small number of monitoring trails for localizing all independent dual-link failures in managed networks made up of thousands of links within a given expected short period.

In this paper, we present a classification method for a Computer-Aided Diagnosis (CAD) system in a colorectal magnified Narrow Band Imaging (NBI) endoscopy. In an endoscopic video image, color shift, blurring or reflection of light occurs in a lesion area, which affects the discrimination result by a computer. Therefore, in order to identify lesions with high robustness and stable classification to these images specific to video frame, we implement a CAD system for colorectal endoscopic images with the Convolutional Neural Network (CNN) feature and Support Vector Machine (SVM) classification on the embedded DSP core. To improve the robustness of CAD system, we construct the SVM learned by multiple image sizes data sets so as to adapt to the noise peculiar to the video image. We confirmed that the proposed method achieves higher robustness, stable, and high classification accuracy in the endoscopic video image. The proposed method also can cope with differences in resolution by old and new endoscopes and perform stably with respect to the input endoscopic video image.

A new construction of shift sequences is proposed under the condition of P|L, and then the inter-group complementary (IGC) sequence sets are constructed based on the shift sequence. By adjusting the parameter q, two or three IGC sequence sets can be obtained. Compared with previous methods, the proposed construction can provide more sequence sets for both synchronous and asynchronous code-division multiple access communication systems.

In this paper, the influence of surface waves on the characteristics of on-glass antennas is clarified to enable appropriates design of C-band automotive on-glass antennas. Composite glasses are used in automotive windshields. These automotive composite glasses are composed of three layers. First, the surface wave properties of composite glass are investigated. Next, the effects of surface waves on the reflection coefficient characteristics of on-glass antennas are investigated. Finally, the antenna placement to reduce surface wave effect will be presented. Electromagnetic field analysis of a dipole antenna placed at the center of a 300mm × 300mm square flat composite glass showed that the electric field strength in the glass had ripples with the half wavelength period of the surface waves. Therefore, it was confirmed that standing waves are generated because of these surface waves. In addition, it is confirmed that ripples occur in the reflection coefficient at frequencies. Glass size is divisible by each of those guide wavelengths. Furthermore, it was clarified that the reflection coefficient fluctuates with respect to the distance between the antenna and a metal frame, which is attached to the end face in the direction perpendicular to the thickness of the glass because of the influence of standing waves caused by the surface waves; additionally, the reflection coefficient gets worse when the distance between the antenna and the metal frame is an integral multiple of one half wavelength. A similar tendency was observed in an electric field analysis using a model that was shaped like the actual windshield shape. Because radiation patterns also change as a result of the influence of surface waves and metal frames, the results imply that it is necessary to consider the actual device size and the metal frames when designing automotive on-glass antennas.

In this paper, we propose a new method based on copula theory to evaluate the detection performance of a distributed-processing multistatic radar system (DPMRS). By applying the Gaussian copula to model the dependence of local decisions in a DPMRS as well as data fusion rules of AND, OR, and K/N, the performance of a DPMRS for detecting Swerling fluctuating targets can be easily evaluated even under non-Gaussian clutter with a nonuniform dependence matrix. The reliability and flexibility of this method are validated by applying the proposed method to a previous problem by other authors, and our other investigation results indicate its high potential for evaluating DPMRS performance in various cases involving different models of target and clutter.

With the arrival of 5G and the popularity of smart devices, indoor localization technical feasibility has been verified, and its market demands is huge. The channel state information (CSI) extracted from Wi-Fi is physical layer information which is more fine-grained than the received signal strength indication (RSSI). This paper proposes a CSI correction localization algorithm using DenseNet, which is termed CorFi. This method first uses isolation forest to eliminate abnormal CSI, and then constructs a CSI amplitude fingerprint containing time, frequency and antenna pair information. In an offline stage, the densely connected convolutional networks (DenseNet) are trained to establish correspondence between CSI and spatial position, and generalized extended interpolation is applied to construct the interpolated fingerprint database. In an online stage, DenseNet is used for position estimation, and the interpolated fingerprint database and K-nearest neighbor (KNN) are combined to correct the position of the prediction results with low maximum probability. In an indoor corridor environment, the average localization error is 0.536m.

In this paper, we propose a novel user selection scheme based on jointly combining channel gain (CG) and signal to interference plus noise ratio (SINR) to improve the sum-rate as well as to reduce the computation complexity of multi-user massive multi-input multi-output (MU-massive MIMO) downlink transmission through a block diagonalization (BD) precoding technique. By jointly considering CG and SINR based user sets, sum-rate performance improvement can be achieved by selecting higher gain users with better SINR conditions as well as by eliminating the users who cause low sum-rate in the system. Through this approach, the number of possible outcomes for the user selection scheme can be reduced by counting the common users for every pair of user combinations in the selection process since the common users of CG-based and SINR-based sets possess both higher channel gains and better SINR conditions. The common users set offers not only sum-rate performance improvements but also computation complexity reduction in the proposed scheme. It is shown by means of computer simulation experiments that the proposed scheme can increase the sum-rate with lower computation complexity for various numbers of users as compared to conventional schemes requiring the same or less computational complexity.

This paper presents an X-band power-combined pulsed high power amplifier (HPA) based on the low insertion loss waveguide combiner. Relationships between the return loss and isolation of the magic Tee (MT) have been analyzed and the accurate design technique is given. The combination network is validated by the measurement of a single MT and a four-way passive network, and the characterization of the combined HPA module is designed, fabricated and discussed. The HPA delivers 200W output power with an associated power-added efficiency close to 40% within the frequency range of 7.8 GHz to 12.3 GHz. The combination efficiency is higher than 93%.

Although many software engineering studies have been conducted, it is not clear whether they meet the needs of software development practitioners. Some studies evaluated the effectiveness of software engineering research by practitioners, to clarify the research satisfies the needs of the practitioners. We performed replicated study of them, recruiting practitioners who mainly belong to SMEs (small and medium-sized enterprises) to the survey. We asked 16 practitioners to evaluate cutting-edge software engineering studies presented in ICSE 2016. In the survey, we set the viewpoint of the evaluation as the effectiveness for the respondent's own work. As a result, the ratio of positive answers (i.e., the answers were greater than 2 on a 5-point scale) was 33.3%, and the ratio was lower than past studies. The result was not affected by the number of employees in the respondent's company, but would be affected by the viewpoint of the evaluation.

Due to the rapid development of different processors, e.g., x86 and Sunway, software porting between different platforms is becoming more frequent. However, the migrated software's execution efficiency on the target platform is different from that of the source platform, and most of the previous studies have investigated the improvement of the efficiency from the hardware perspective. To the best of our knowledge, this is the first paper to exclusively focus on studying what software factors can result in performance change after software migration. To perform our study, we used SonarQube to detect and measure five software factors, namely Duplicated Lines (DL), Code Smells Density (CSD), Big Functions (BF), Cyclomatic Complexity (CC), and Complex Functions (CF), from 13 selected projects of SPEC CPU2006 benchmark suite. Then, we measured the change of software performance by calculating the acceleration ratio of execution time before (x86) and after (Sunway) software migration. Finally, we performed a multiple linear regression model to analyze the relationship between the software performance change and the software factors. The results indicate that the performance change of software migration from the x86 platform to the Sunway platform is mainly affected by three software factors, i.e., Code Smell Density (CSD), Cyclomatic Complexity (CC), and Complex Functions (CF). The findings can benefit both researchers and practitioners.