Superconductive LSIs with Josephson junctions have features such as low power dissipation and high switching speed. In this paper, we review our developed 4-Kbit RAM with vortex transitional memory cells as an illustration of superconductive LSIs with Josephson junctions. We have developed a fabrication process technology for the 4-Kbit RAM. In the 4-Kbit RAM, 380ps access time and 9.8 mW power dissipation have been experimentally obtained. And also, we have estimated a suitable moat structure to reduce the influence of trapped magnetic structure. The 4-Kbit RAM has been successfully operated with a bit yield of 99.8%. Furthermore, we discuss GHz testing which is one of the most significant issues concerning superconductive digital LSIs.

This paper develops an efficient mechanism for extracting primary information requests from 'Seek-Object' type query messages. The mechanism consists of three steps. The first step extracts sentences which signal that the query is 'Seek-Object' type by recognizing distinctive surface expressions. The second step, biased by the expression patterns, analyzes their internal structures. The third step integrates these fragments by a partial discourse processing and represents writers' goal-directed information request; as these sentences often include referential expressions and the referred expressions are in background goal descriptions. We claim the mechanism can extract information requests fairly accurately, by showing evaluation results.

A binary counter circuit in the extended phase-mode logic (EPL) family is presented. The EPL family utilizes a single flux quantum as an information bit carrier. Numerical simulations show that a binary counter circuit with a Josephson critical current density of 1 kA/cm2 can operate up to a 30 GHz input signal. The circuit has been fabricated using Nb/AlOx/Nb Josephson junction technology. New interface circuits are employed in the fabricated chip. A low speed test result shows the correct operation of the binary counter.

This paper proposes robust algorithms for linebased pose enumeration from a single view, and it reports on their evaluations by simulations. The proposed algorithms incorporate two major refinements into the algorithms originally proposed by Shakunaga [1]. The first refinement, introduction of zone-crossing detection to the 1-d search remarkably decreases the rate of overlooking a correct pose. The second refinement, adaptive selection of a PAT pair considerably reduces the average estimation error. Simulation results show that pose estimation precision depends primarily on the precision of line detection. Although the refinements are widely effective, they are more effective for more precise line detection. For 99% of rigid body samples, the algorithm can estimate rotation with an error of less than 2 degrees, and for 99.9% of the samples, the error is less than 10 degrees. Simulation experiments for articulated objects show similar results by using the second algorithm. The effectiveness of the algorithms is verified in an alignment approach by simulations.

In this paper, we define the distortion at a certain complexity level, which is the dual quantity of the distortion-complexity. We prove a theorem dual to the theorem which we have given of the asymptotic property of the distortion-complexity. We also give a universal data-base for fixed-rate data compression with distortion and prove its asymptotic optimality.

An algorithm for finding the unequal error protection (UEP) capability of a q-ary image of a low-rate qm-ary cyclic code is presented by combining its concatenated structure with the UEP capability of concatenated codes. The results are independent of a choice of a basis to be used for expanding an element over GF (qm) into GF (q). A table of the UEP capability of binary images of low-rate Reed-Solomon codes over GF (26) is given. It is shown that the encoding and decoding algorithms for superimposed concatenated codes can be applied to a q-ary image as a linear UEP code.

M-ary orthogonal keying (MOK) systems under carrier frequency offset (CFO) are investigated. It is shown that spurious signals are introduced by the offset frequency components of spectrum after multiplication in correlation detection process, and some conditions on robust orthogonal signal sets are derived. Walsh function sets are found to be very weak against CFO, since they produce large spurious signals. As robust orthogonal signal sets against CFO, the rows of circulant Hadamard matrices are proposed and their error performanses are evaluated. The results show that they are good M-ary orthogonal signal sets in the presence of CFO.

The performance of an M-ary spread-spectrum multiple-access (M-ary/SSMA) scheme in the presence of carrier frequency offset is discussed in this paper. The influence of carrier frequency offset on the non-coherent reception of M-ary/SSMA signals is examined and it is shown that the carrier frequency offset degrades the performance remarkably, yet. this influence has a distinctive property. Making use of this property, we propose a new M-ary/SSMA scheme that can mitigate the influence of the carrier frequency offset. The scheme is based on the assignment of two distinctive Hadamard codes to in-phase and quadrature components of the transmitted signal. The effect of simultaneous transmission is evaluated in terms of bit-error-rate performance with the carrier frequency offset. As the result, it is observed that the satisfactory bit-error-rate performance can be achieved in the presence of carrier frequendy offset.

The structure of an SST Viterbi decoder for general rate (n-1)/n convolutional codes is investigated in the light of syndrome decoding. Since the input to the main decoder is expressed as S(H-1)T (S: syndrome, H: dual encoder of G) for a general non-systematic convolutional code G if the inverse encoder G-1 is used as a pre-decoder, SST Viterbi decoding can be regarded as searching for the most likely error sequence through an extended syndrome trellis. We show that searching based on the extended syndrome trellis is equivalent to the original syndrome decoding by applying the invariant-factor theorem.

As the demand of wireless personal communications networks increases, detailed chracteristics of indoor radio propagation in UHF band are required. In this paper, multipath fading characteristics at 1 GHz in an indoor mobil (walking speed) channel are investigated. By using a computer-controlled antenna scanner, signal strength was measured at 1400 points with a quarter wavelength resolution, which forms a two-dimensional fading map. The fading characteristics were found to be mainly dominated by the signals through the LOS path and the reflected paths due to two side-walls and one front-wall. It is analytically shown that middle-scale (over three wavelengths) fading is caused by the reflection from the side-walls, and periodical small-scale (equal to or less than a wavelength) fading is caused by the reflection from the front-wall. A software simulator based on geometric optics was developed in order to predict the measured fades. A modified algorithm for the two-dimensional ray launching technique which removes the necessity of checking the "multiple-counted rays" is presented. Comparison between measurements and predictions shows good agreement highlighting the usefulness of the two-dimensional simulator as a tool for channel design.

For Nakagami-Rice fading environment which seems to become a principle propagation environment in the next generation wideband and high-capacity mobile systems such as personal communications, we have previously proposed an approximated evaluation scheme for wideband digital transmission characteristics such as errors due to intersymbol interference of multipath waves. We called the scheme 'Equivalent Transmission-Path (ETP) Model.' In this paper, through a discussion about more general equivalent propagation channel expressions, we clarify a theoretical foundation of the ETP model and extend the model to have an ability of expression of instantaneous fading condition varying with time. Also the appropriateness of the instantaneous expression is examined by a computer simulation analysis. Based on this model, statistics of link quality and service availability in Nakagami-Rice fading environments are discussed.

This paper presents a configuration of circularly polarized annular-ring microstrip antenna (ARMSA) and its design method to obtain high gain and low axial ratio including the analysis of finite ground plane effect using G.T.D. for personal satellite communication use. The ARMSA excited at TM21 mode through co-planar branch-line hybrid coupler for circular polarization produces a conical pattern which has high gain in low elevation angle. The relation of gain and axial ratio versus the dielectric constant of substrate are shown and the existence of the dielectric constant which satisfies two requirements, that is, high gain and low axial ratio are clarified. For car-top application, experimental results in the L-band showed satisfactory characteristics for vehicle antenna.

Hybrid direct sequence/slow frequency hopping-time division duplex (DS/SFH-TDD) multiple access system has some good features of each system. However it has a problem of hit between multiple users. If the designed frequency hopping patterns are inadequate, the quality of the multiple access system is degraded due to the frequent hit. In this paper, we propose an adaptive hopping pattern control system which is able to avoid the multiple access interference of hit. The proposed system decreases the influence of hit and increases the user capacity in the cell. And this adaptive hopping pattern control is applied to both single-cell and multi-cell systems. By computer simulation to evaluate the performance of this system, we found that this system is effective in increasing the multiple access capability.

This paper presents a new blind identification method of nonminimum phase FIR systems and an adaptive blind equalization for PAM/QAM inputs without employing higher-order statistics. They are based on the observation that the absolute mean of a second-order white sequence can measure whether the sequence is higher-order white or not. The proposed methods are new alternatives to many higher-order statistics approaches. Some computer simulations show that the absolute mean is exactly estimated and the proposed methods can overcome the disadvantages of the higher-order statistics approaches.

This paper compares the performance of an indoor cellular system in terms of capacity and channel assignment delay for different Dynamic Channel Assignment (DCA) and Fixed Channel Assignment (FCA) schemes. We refer to specific group of DCAs, namely Channel Segregation and Reuse Partitioning (RP). Our main concern is to show that these DCA schemes offer better performance than FCA. Since the structure and floor layout of a building will have a major influence on the propagation and hence on the cell shape, a path loss simulator is developed for predicting the path loss which is used in evolving base station layouts. Computer simulation, based on Monte Carlo method, is carried out using the path loss values and the base station layouts. The results indicate that increased traffic capacity can be achieved with all DCAs in comparison with FCA. The highest capacity and a shorter channel assignment delay are delivered by Self-Organized Reuse Partitioning DCA scheme.

This paper considers the evaluation of the acquisition performance for an access channel preamble based on the random access procedure of direct sequence code division multiple access (DS/CDMA) reverse link. The parallel acquisition technique that employs the single-dwell and multiple-dwell (double-dwell) detection schemes is investigated. The acquisition performance for two detection schemes is compared in terms of the acquisition probablity and the mean acquisition time. The parallel acquisition is done by a bank of N parallel I/Q noncoherent correlators. Expressions on the detection, false alarm, and miss probabilities of the single-dwell and multiple-dwell (double-dwell) detection schemes are derived for the multiple H1 cells and multipath Rayleigh fading channel. Comparing the single-dwell detection scheme with the multiple-dwell (double-dwell) detection scheme in the case of employing the parallel acquisition technique in the reverse link, the numerical results show that the single-dwell detection scheme provides a better performance.

ISM band has been approved for spread spectrum communication in radio LAN in Japan since December 1992. This frequency band extends from 2.474 GHz to 2.5 GHz with 26 MHz bandwide. In an indoor environment, the maximum observed delay spread is 100-200 ns in a room, it is too short to generate a selective fading, thus flat fading conditions are often observed. Serve as an alleviation, we propose a new system of multi-antenna in base station (BS) and single antenna in mobile station (MS). In this system, MS should have a simple structure for its small size and energy-saving.

The 4th harmonics of a Nd:YAG laser beam (266 nm) is applied to fabricate highly oriented Y1Ba2Cu3O7-δ -SrTiO3-Y1Ba2Cu3O7-δ multilayer structures. It has been shown that the emission temperature of a film surface will change during deposition, depending on deposition conditions, even though the heater temperature is constant. The change of substrate temperature is strongly correlated to film characteristics such as critical temperature, c-axis length, and resistivity. The insitu monitoring of the substrate temperature is useful for obtaining high-quality Y1Ba2Cu3O7-δ films reproducibly. It is also shown that a SrTiO3 layer prevents oxygen restoration in a Y1Ba2Cu3O7-δ underlayer. The relationship between oxygen deficiency and the annealing conditions is studied.

We have developed a strato-mesospheric ozone monitoring system with a low noise SIS mixer, which receives 110.836 GHz millimeter-wave emission due to the rotational transition of ozone molecules (J=61,560,6). The system is completely standalone. We derived the altitude profile of ozone density between 25 km and 80 km from the observed spectrum. The receiver noise temperature was as low as 17 K (DSB), so that the altitude profile could be obtained every 3-10 minutes. The monitoring system can operate continuously over one year without any maintenance work, because it utilizes a 4 K closed cycle helium refrigerator and reliable Nb/AIOx/Nb SIS junctions. We used two acousto-optical spectrometers (AOSs) as real-time spectrometers because of their high resolution and simple construction. In an up-to-date system, one AOS would have a band-width of 65 MHz and the other, a band-width of 250 MHz with resolutions of 40 kHz and 250 kHz, respectively. A computer controls the entire system and is also used to analyze measured data. In this paper, we present the principles of system operation, the latest performance and the construction of the system, and some observed data.

In the weakly coupled grain model which has been proposed to explain the residual surface resistance in high-Tc superconducting polycrystalline thin films, the superconducting polycrystalline thin films is described as a network of superconducting grains coupled via Josephson junctions. In order to evaluate this model we have fabricated the coplanar waveguide resonator using c-axis oriented YBa2Cu3Ox Thin Films and measured the residual surface resistance. The experimental results are in good agreement with theoretical prediction.