This paper proposes a non-linear overloaded MIMO detector that outperforms the conventional soft-input maximum likelihood detector (MLD) with less computational complexity. We propose iterative log-likelihood ratio (LLR) estimation and multi stage LLR estimation for the proposed detector to achieve such superior performance. While the iterative LLR estimation achieves better BER performance, the multi stage LLR estimation makes the detector less complex than the conventional soft-input maximum likelihood detector (MLD). The computer simulation reveals that the proposed detector achieves about 0.6dB better BER performance than the soft-input MLD with about half of the soft-input MLD's complexity in a 6×3 overloaded MIMO OFDM system.

Device-to-device (D2D) communication allows user terminals to directly communicate with each other without the need for any base stations (BSs). Since the D2D communication underlaying a cellular system shares frequency channels with BSs, co-channel interference may occur. Successive interference cancellation (SIC), which is also called the serial interference canceler, detects and subtracts user signals from received signals in descending order of received power, can cope with the above interference and has already been applied to fog nodes that manage communications among machine-to-machine (M2M) devices besides direct communications with BSs. When differences among received power levels of user signals are negligible, however, SIC cannot work well and thus causes degradation in bit error rate (BER) performance. To solve such a problem, this paper proposes to apply parallel interference cancellation (PIC), which can simultaneously detect both desired and interfering signals under the maximum likelihood criterion and can maintain good BER performance even when power level differences among users are small. When channel coding is employed, however, SIC can be superior to PIC in terms of BER under some channel conditions. Considering the superiority, this paper also proposes to select the proper cancellation scheme and modulation and coding scheme (MCS) that can maximize the throughput of D2D under a constraint of BER, in which the canceler selection is referred to as adaptive interference cancellation. Computer simulations show that PIC outperforms SIC under almost all channel conditions and thus the adaptive selection from PIC and SIC can achieve a marginal gain over PIC, while PIC can achieve 10% higher average system throughput than that of SIC. As for transmission delay time, it is demonstrated that the adaptive selection and PIC can shorten the delay time more than any other schemes, although the fog node causes the delay time of 1ms at least.

The decoders, which improve the error-correction performance by finding and correcting the error bits caused by channel noise, are a hotspot for polar codes. In this paper, we present a threshold based D-SCFlip (TD-SCFlip) decoder with two improvements based on the D-SCFlip decoder. First, we propose the LLR fidelity criterion to define the LLR threshold and investigate confidence probability to calculate the LLR threshold indirectly. The information bits whose LLR values are smaller than the LLR threshold will be excluded from the range of candidate bits, which reduces the complexity of constructing the flip-bits list without the loss of error-correction performance. Second, we improve the calculation method for flip-bits metric with two perturbation parameters, which locates the channel-induced error bits faster, thus improving the error-correction performance. Then, TD-SCFlip-ω decoder is also proposed, which is limited to correcting up to ω bits in each extra decoding attempt. Simulation results show that the TD-SCFlip decoding is slightly better than the D-SCFlip decoding in terms of error-correction performance and decoding complexity, while the error-correction performance of TD-SCFlip-ω decoding is comparable to that of D-SCFlip-ω decoding but with lower decoding complexity.

This paper proposes a scheme that reduces residual self-interference significantly in the analog-circuit domain on wireless full-duplex relay systems. Full-duplex relay systems utilize the same time and frequency resources for transmission and reception at the relay node to improve spectral efficiency. Our proposed scheme measures multiple responses of the feedback path by changing the direction of the main beam of the transmitter at the relay, and then selecting the optimal direction that minimizes the residual self-interference. Analytical residual self-interference is derived as the criterion to select the optimal direction. In addition, this paper considers the target of residual self-interference power before the analog-to-digital converter (ADC) dependent on the dynamic range in the analog-circuit domain. Analytical probability that the residual interference exceeds the target is derived to help in determining the number of measured responses of the feedback path. Computer simulations validate the analytical results, and show that in particular, the proposed scheme with ten candidates improves the residual self-interference by approximately 6dB at the probability of 0.01 that the residual self-interference exceeds target power compared with a conventional scheme with the feedback path modeled as Rayleigh fading.

Cancellation of self interference (SI) is an important technology in order for wireless communication system devices to perform full-duplex communication. In this paper, we propose a novel self-interference cancellation using null beamforming to be applied entire IEEE 802.11 frame including the legacy part for full-duplex wireless communication on Cooperative MIMO (Multiple Input Multiple Output). We evaluate the SI cancellation amount by the proposed method using a field programmable gate array (FPGA) and software defined radio (SDR), and show the experimental results. In the experiment, it is confirmed that the amount of SI cancellation by the proposed method was at least 18dB. The SI cancellation amount can be further potentiated with more accurate CSI (channel state information) by increasing the transmission power. It is shown that SI can be suppressed whole frame which includes legacy preamble part. The proposed method can be applied to next generation wireless communication standards as well.

In this paper, two-stage BP detection is proposed for overloaded MIMO. The proposal combines BP with the MMSE pre-cancellation algorithm followed by normal BP detection. In overloaded MIMO systems, the loops in a factor graph degrade the demodulation performance of BP detection. MMSE pre-cancellation reduces the number of connections or coefficient values in the factor graph which improves the convergence characteristics of posteriori probabilities. Numerical results obtained through computer simulation show that the BERs of the proposed two-stage BP detection outperforms the conventional BP with MMSE pre-cancellation in a low bit energy range when the MMSE block size is four and the number of MMSE blocks is one. When the pre-cancellation is applied for complexity reduction, the proposed scheme reduces multiplication operations and summation operations by the same factor of 0.7 though the amount of the performance improvement to the conventional scheme is limited.

In-band full-duplex (IBFD) has been an attractive technology, which can theoretically double the spectral efficiency. However, when performing IBFD in the dynamic-duplex cellular (DDC) system, inter-user interference (IUI) deteriorates transmission performance in downlink (DL) communication and limits IBFD-applicable area and IBFD application ratio. In this paper, to expand the IBFD-applicable area and improve the IBFD application ratio, we propose an IUI reduction scheme using successive interference cancellation (SIC) for the DDC system. SIC can utilize the power difference and reduce the signal with the higher power. The effectiveness of the proposed scheme is evaluated by the computer simulation. The IUI reducing effect on the IBFD-inapplicable area is confirmed when the received power of the IUI is stronger than that of the desired signal at the user equipment for DL (DL-UE). The IBFD-inapplicable area within 95m from the DL-UE, where the IBFD does not work without the proposed scheme, can reduce by 43.6% from 52.8% to 9.2% by applying the proposed scheme. Moreover, the IBFD application ratio can improve by 24.6% from 69.5% to 94.1%.

This paper proposes a new class of signature codes for synchronous optical code-division multiple access (CDMA) and describes a general method for construction of the codes. The proposed codes can be obtained from generalized modified prime sequence codes (GMPSCs) based on extension fields GF(q), where q=pm, p is a prime number, and m is a positive integer. It has been reported that optical CDMA systems using GMPSCs remove not only multi-user interference but also optical interference (e.g., background light) with a constant intensity during a slot of length q2. Recently, the authors have reported that optical CDMA systems using GMPSCs also remove optical interference with intensity varying by blocks with a length of q. The proposed codes, referred to as p-chip codes in general and chip-pair codes in particular for the case of p=2, have the property of removing interference light with an intensity varying by shorter blocks with a length of p without requiring additional equipment. The present paper also investigates the algebraic properties and applications of the proposed codes.

Distributed detection techniques of multiple-input multiple-output (MIMO) spatially multiplexed signals are studied in this paper. This system considered employs multiple mobile stations (MSs) to receive signals from a base station, and then share their received signal waveforms with collaborating MSs. In order to reduce the amount of traffic over the collaborating wireless links, distributed detection techniques are proposed, in which multiple MSs are in charge of detection by making use of both the shared signal waveforms and its own received waveform. Selection combining schemes of detected bit sequences are studied to finalize the decisions. Residual error coefficients in iterative MIMO equalization and detection are utilized in this selection. The error-ratio performance is elucidated not only by computer simulations, but also by offline processing using experimental signals recorded in a measurement campaign.

This paper proposes a parallel peak cancellation (PC) process for the computational complexity-efficient algorithm called PC with a channel-null constraint (PCCNC) in the adaptive peak-to-average power ratio (PAPR) reduction method using the null space in a multiple-input multiple-output (MIMO) channel for MIMO-orthogonal frequency division multiplexing (OFDM) signals. By simultaneously adding multiple PC signals to the time-domain transmission signal vector, the required number of iterations of the iterative algorithm is effectively reduced along with the PAPR. We implement a constraint in which the PC signal is transmitted only to the null space in the MIMO channel by beamforming (BF). By doing so the data streams do not experience interference from the PC signal on the receiver side. Since the fast Fourier transform (FFT) and inverse FFT (IFFT) operations at each iteration are not required unlike the previous algorithm and thanks to the newly introduced parallel processing approach, the enhanced PCCNC algorithm reduces the required total computational complexity and number of iterations compared to the previous algorithms while achieving the same throughput-vs.-PAPR performance.

In this paper, we propose a model of a diversity receiver which uses an antenna whose antenna pattern can periodically change. We also propose a minimum mean square error (MMSE) based interference cancellation method of the receiver which, in principle, can suffer from the interference in neighboring frequency bands. Since the antenna pattern changes according to the sum of sinusoidal waveforms with different frequencies, the received signals are received at the carrier frequency and the frequencies shifted from the carrier frequency by the frequency of the sinusoidal waveforms. The proposed diversity scheme combines the components in the frequency domain to maximize the signal-to-noise power ratio (SNR) and to maximize the diversity gain. We confirm that the bit error rate (BER) of the proposed receiver can be improved by increase in the number of arrival paths resulting in obtaining path diversity gain. We also confirm that the proposed MMSE based interference canceller works well when interference signals exist and achieves better BER performances than the conventional diversity receiver with maximum ratio combining.

We propose a novel non-orthogonal multiple access (NOMA)-based optimal multiplexing method for multiple downlink service channels to maximize the integrated system throughput. In the fifth generation (5G) mobile communication system, the support of various wireless communication services such as massive machine-type communications (mMTC), ultra-reliable low latency communications (URLLC), and enhanced mobile broadband (eMBB) is expected. These services will serve different numbers of terminals and have different requirements regarding the spectrum efficiency and fairness among terminals. Furthermore, different operators may have different policies regarding the overall spectrum efficiency and fairness among services. Therefore, efficient radio resource allocation is essential during the multiplexing of multiple downlink service channels considering these requirements. The proposed method achieves better system performance than the conventional orthogonal multiple access (OMA)-based multiplexing method thanks to the wider transmission bandwidth per terminal and inter-terminal interference cancellation using a successive interference canceller (SIC). Computer simulation results reveal that the effectiveness of the proposed method is especially significant when the system prioritizes the fairness among terminals (including fairness among services).

This paper proposes a computational complexity-reduced algorithm for an adaptive peak-to-average power ratio (PAPR) reduction method previously developed by members of our research group that uses the null space in a multiple-input multiple-output (MIMO) channel for MIMO-orthogonal frequency division multiplexing (OFDM) signals. The proposed algorithm is an extension of the peak cancellation (PC) signal-based method that has been mainly investigated for per-antenna PAPR reduction. This method adds the PC signal, which is designed so that the out-of-band radiation is removed/reduced, directly to the time-domain transmission signal at each antenna. The proposed method, referred to as PCCNC (PC with channel-null constraint), performs vector-level signal processing in the PC signal generation so that the PC signal is transmitted only to the null space in the MIMO channel. We investigate three methods to control the beamforming (BF) vector in the PC signal, which is a key factor in determining the achievable PAPR performance of the algorithm. Computer simulation results show that the proposed PCCNC achieves approximately the same throughput-vs.-PAPR performance as the previous method while dramatically reducing the required computational cost.

In wireless sensor networks (WSN), communication interference and the energy limitation of sensor nodes seriously hamper the network performance such as throughput and network lifetime. In this paper, we focus on the Successive Interference Cancellation (SIC) and Wireless Energy Transmission (WET) technology aiming to design a heuristic power control algorithm and an efficient cross-layer strategy to realize concurrency communication and improve the network throughput, channel utilization ratio and network lifetime. We realize that the challenge of this problem is that joint consideration of communication interference and energy shortage makes the problem model more complicated. To solve the problem efficiently, we adopt link scheduling strategy, time-slice scheduling scheme and energy consumption optimization protocol to construct a cross-layer optimization problem, then use an approximate linearization method to transform it into a linear problem which yields identical optimal value and solve it to obtain the optimal work strategy of wireless charging equipment (WCE). Simulation results show that adopting SIC and WCE can greatly improve communication capability and channel utilization ratio, and increase throughput by 200% to 500% while prolonging the network lifetime.

In this letter, the principle of LLR-based successive-cancellation (SC) polar decoding algorithm is explored. In order to simplify the logarithm and exponential operations in the updating rules for polar codes, we further utilize a piece-wise linear algorithm to approximate the transcendental functions, where the piece-wise linear algorithm only consists of multiplication and addition operations. It is demonstrated that with one properly allowable maximum error δ chosen for success-failure algorithm, performances approach to that of the standard SC algorithm can be achieved. Besides, the complexity reduction is realized by calculating a linear function instead of nonlinear function. Simulation results show that our proposed piece-wise SC decoder greatly reduces the complexity of the SC-based decoders with no loss in error correcting performance.

This paper proposes a successive interference cancellation (SIC) of independent component analysis (ICA) aided spatial division multiple access (SDMA) for Gaussian filtered frequency shift keying (GFSK) in Bluetooth low energy (BLE) systems. The typical SDMA scheme requires estimations of channel state information (CSI) using orthogonal pilot sequences. However, the orthogonal pilot is not embedded in the BLE packet. This fact motivates us to add ICA detector into BLE systems. In this paper, focusing on the covariance matrix of ICA outputs, SIC can be applied with Cholesky decomposition. Then, in order to address the phase ambiguity problems created by the ICA process, we propose a differential detection scheme based on the MAP algorithm. In practical scenarios, it is subject to carrier frequency offset (CFO) as well as symbol timing offset (STO) induced by the hardware impairments present in the BLE peripherals. The packet error rate (PER) performance is evaluated by computer simulations when BLE peripherals simultaneously communicate in the presence of CFO and STO.

This paper presents a successive cancellation (SC) decoding of polar codes modified for insertion/deletion/substitution (IDS) error channels, in which insertions and deletions are described by drift values. The recursive calculation of the original SC decoding is modified to include the drift values as stochastic variables. The computational complexity of the modified SC decoding is O (D3) with respect to the maximum drift value D, and O (N log N) with respect to the code length N. The symmetric capacity of polar bit channel is estimated by computer simulations, and frozen bits are determined according to the estimated symmetric capacity. Simulation results show that the decoded error rate of polar code with the modified SC list decoding is lower than that of existing IDS error correction codes, such as marker-based code and spatially-coupled code.

To estimate angle, velocity, and range information of multiple targets jointly in FMCW MIMO radar, two-dimensional (2D) MUSIC with matched filtering and FFT algorithm is proposed. By reformulating the received FMCW signal of the colocated MIMO radar, we exploit 2D MUSIC to estimate the angle and Doppler frequency of multiple targets. Then by using a matched filter together with the estimated angle and Doppler frequency and FFT operation, the range of the target is estimated. To effectively estimate the parameters of multiple targets with large distance differences, we also propose a successive interference cancellation method that uses the orthogonal projection. That is, rather than estimating the multiple target parameters simultaneously using 2D MUSIC, we estimate the target parameters sequentially, in which the parameters of the target having strongest reflected power are estimated first and then, their effect on the received signal is canceled out by using the orthogonal projection. Simulations verify the performance of the proposed algorithm.

In this paper, we propose an adaptive fusion successive cancellation list decoder (ADF-SCL) for polar codes with single cyclic redundancy check. The proposed ADF-SCL decoder reasonably avoids unnecessary calculations by selecting the successive cancellation (SC) decoder or the adaptive successive cancellation list (AD-SCL) decoder depending on a log-likelihood ratio (LLR) threshold in the decoding process. Simulation results show that compared to the AD-SCL decoder, the proposed decoder can achieve significant reduction of the average complexity in the low signal-to-noise ratio (SNR) region without degradation of the performance. When Lmax=32 and Eb/N0=0.5dB, the average complexity of the proposed decoder is 14.23% lower than that of the AD-SCL decoder.

This paper studies the joint optimization of precoding, transmit power and data rate allocation for energy-efficient full-duplex (FD) cloud radio access networks (C-RANs). A new nonconvex problem is formulated, where the ratio of total sum rate to total power consumption is maximized, subject to the maximum transmit powers of remote radio heads and uplink users. An iterative algorithm based on successive convex programming is proposed with guaranteed convergence to the Karush-Kuhn-Tucker solutions of the formulated problem. Numerical examples confirm the effectiveness of the proposed algorithm and show that the FD C-RANs can achieve a large gain over half-duplex C-RANs in terms of energy efficiency at low self-interference power levels.