Compared with acoustic microphone (AM) speech, bone-conducted microphone (BCM) speech is much immune to background noise, but suffers from severe loss of information due to the characteristics of the human-body transmission channel. In this letter, a new method for the speaker-dependent BCM speech enhancement is proposed, in which we focus our attention on the spectra restoration of the distorted speech. In order to better infer the missing components, an attention-based bidirectional Long Short-Term Memory (AB-BLSTM) is designed to optimize the use of contextual information to model the relationship between the spectra of BCM speech and its corresponding clean AM speech. Meanwhile, a structural error metric, Structural SIMilarity (SSIM) metric, originated from image processing is proposed to be the loss function, which provides the constraint of the spectro-temporal structures in recovering of the spectra. Experiments demonstrate that compared with approaches based on conventional DNN and mean square error (MSE), the proposed method can better recover the missing phonemes and obtain spectra with spectro-temporal structure more similar to the target one, which leads to great improvement on objective metrics.

This paper introduces methods to modify a buggy sequential gate-level circuit to conform to the specification. In order to preserve the optimization efforts, the modifications should be as small as possible. Assuming that the locations to be modified are given, our proposed method finds an appropriate set of fan-in signals for the patch function of those locations by iteratively calculating the state correspondence between the specification and the buggy circuit and applying a method for debugging combinational circuits. The experiments are conducted on ITC99 benchmark circuits, and it is shown that our proposed method can work when there are at most 30,000 corresponding reachable state pairs between two circuits. Moreover, a heuristic method using the information of data-path FFs is proposed, which can find a correct set of fan-ins for all the benchmark circuits within practical time.

In wireless multi-hop networks such as ad hoc networks and sensor networks, backoff-based opportunistic routing protocols, which make a forwarding decision based on backoff time, have been proposed. In the protocols, each potential forwarder calculates the backoff time based on the product of a weight and global scaling factor. The weight prioritizes potential forwarders and is calculated based on hop counts to the destination of a sender and receiver. The global scaling factor is a predetermined value to map the weight to the actual backoff time. However, there are three common issues derived from the global scaling factor. First, it is necessary to share the predetermined global scaling factor with a centralized manner among all terminals properly for the backoff time calculation. Second, it is almost impossible to change the global scaling factor during the networks are being used. Third, it is difficult to set the global scaling factor to an appropriate value since the value differs among each local surrounding of forwarders. To address the aforementioned issues, this paper proposes a novel decentralized local scaling factor control without relying on a predetermined global scaling factor. The proposed method consists of the following three mechanisms: (1) sender-centric local scaling factor setting mechanism in a decentralized manner instead of the global scaling factor, (2) adaptive scaling factor control mechanism which adapts the local scaling factor to each local surrounding of forwarders, and (3) mitigation mechanism for excessive local scaling factor increases for the local scaling factor convergence. Finally, this paper evaluates the backoff-based opportunistic routing protocol with and without the proposed method using computer simulations.

We propose a distributed blind equalization method for wireless sensor networks, in which a source sends data and each node performs time-domain equalization to estimate the data from a received signal that is affected by inter-symbol interference. The equalization can be performed distributively based on the mutually referenced equalization principle. Even if the nodes in the network are not fully connected to each other, the average consensus technique enables us to perform the equalization of all channels.

The flexibility of wireless communication makes it more and more widely used in industrial scenarios. To satisfy the strict real-time requirements of industry, various wireless methods especially based on the time division multiple access protocol have been introduced. In this work, we first conduct a mathematical analysis of the network model and the problem of minimum packet loss. Then, an optimal Real-time Scheduling algorithm based on Backtracking method (RSBT) for industrial wireless sensor networks is proposed; this yields a scheduling scheme that can achieve the lowest network packet loss rate. We also propose a suboptimal Real-time Scheduling algorithm based on Urgency and Concurrency (RSUC). Simulation results show that the proposed algorithms effectively reduce the rate of the network packet loss and the average response time of data flows. The real-time performance of the RSUC algorithm is close to optimal, which confirms the computation efficiency of the algorithm.

In this paper, we propose an acceleration method for the Held-Karp algorithm that solves the symmetric traveling salesman problem by dynamic programming. The proposed method achieves acceleration with two techniques. First, we locate data-independent subproblems so that the subproblems can be solved in parallel. Second, we reduce the number of subproblems by a meet in the middle (MITM) technique, which computes the optimal path from both clockwise and counterclockwise directions. We show theoretical analysis on the impact of MITM in terms of the time and space complexities. In experiments, we compared the proposed method with a previous method running on a single-core CPU. Experimental results show that the proposed method on an 8-core CPU was 9.5-10.5 times faster than the previous method on a single-core CPU. Moreover, the proposed method on a graphics processing unit (GPU) was 30-40 times faster than that on an 8-core CPU. As a side effect, the proposed method reduced the memory usage by 48%.

A set of spanning trees of a graphs G are called completely independent spanning trees (CISTs for short) if for every pair of vertices x, y∈V(G), the paths joining x and y in any two trees have neither vertex nor edge in common, except x and y. Constructing CISTs has applications on interconnection networks such as fault-tolerant routing and secure message transmission. In this paper, we investigate the problem of constructing two CISTs in the balanced hypercube BHn, which is a hypercube-variant network and is superior to hypercube due to having a smaller diameter. As a result, the diameter of CISTs we constructed equals to 9 for BH2 and 6n-2 for BHn when n≥3.

Sequences that attain the smallest possible absolute sidelobes (SPASs) of periodic autocorrelation function (PACF) play fairly important roles in synchronization of communication systems, Large scale integrated circuit testing, and so on. This letter presents an approach to construct 16-QAM sequences of even periods, based on the known quaternary sequences. A relationship between the PACFs of 16-QAM and quaternary sequences is established, by which when quaternary sequences that attain the SPASs of PACF are employed, the proposed 16-QAM sequences have good PACF.

An annealing processor based on the Ising model is a remarkable candidate for combinatorial optimization problems and it is superior to general von Neumann computers. CMOS-based implementations of the annealing processor are efficient and feasible based on current semiconductor technology. However, critical problems with annealing processors remain. There are few simulated spins and inflexibility in terms of implementable graph topology due to hardware constraints. A prior approach to overcoming these problems is to emulate a complicated graph on a simple and high-density spin array with so-called minor embedding, a spin duplication method based on graph theory. When a complicated graph is embedded on such hardware, numerous spins are consumed to represent high-degree spins by combining multiple low-degree spins. In addition to the number of spins, the quality of solutions decreases as a result of dummy strong connections between the duplicated spins. Thus, the approach cannot handle large-scale practical problems. This paper proposes a flexible and scalable hardware architecture with time-division multiplexing for massive spins and high-degree topologies. A target graph is separated and mapped onto multiple virtual planes, and each plane is subject to interleaved simulation with time-division processing. Therefore, the behavior of high-degree spins is efficiently emulated over time, so that no dummy strong connections are required, and the solution quality is accordingly improved. We implemented a prototype hardware design for FPGAs, and we evaluated the proposed method in a software-based annealing processor simulator. The results indicate that the method increased the spins that can be deployed. In addition, our time-division multiplexing architecture improved the solution quality and convergence time with reasonable resource consumption.

For the impulse noise removal from a digital image, most of existing methods cannot repair line structures in an input image. In this letter, a method which considers the local line structure is proposed. In order to judge the direction of the line structure, adjacent lines are considered. The effectiveness of the proposed filter is shown by experiments.

This paper proposes a dual-band dual-rectangular-loop circular polarization antenna for Global Navigation Satellite Systems (GNSSs). The proposed antenna combines two large outer rectangular loops with two small inner loops. Each large outer loop is connected to its corresponding small inner rectangular loop. Each loop has gaps located symmetrically with respect to a feed point to produce Right Handed Circular Polarization (RHCP). The gap position and the shape of the rectangular loops are very important to adjust both the impedance matching and circular polarization characteristics. The proposed antenna offers dual-band Voltage Standing Wave Ratio (VSWR) and Axial Ratio (AR) frequency characteristics that include the L1 (1575.42 MHz) and L2 (1227.60 MHz) bands. The antenna gains exceed 8.7 dBi. Broad AR elevation patterns are obtained. These antenna characteristics are well suited to precise positioning.

Towards involving the convolutional neural networks into the object detection field, many computer vision tasks have achieved favorable successes. In order to adapt targets with various scales, deep feature pyramid is widely used, since the traditional object detection methods detect different objects in Gaussian image pyramid. However, due to the mismatching between the anchors and the feature distributions of targets, the accurate detection for targets with various scales is still a challenge. Considering the differences between the theoretical receptive field and effective receptive field, we propose a novel anchor generation method, which takes the effective receptive field as the standard. The proposed method is evaluated on the PASCAL VOC dataset and shows the favorable results.

A Service Function Chain (SFC) is an ordered sequence of virtual network functions (VNFs) to provide network service. Most existing SFC orchestration schemes, however, cannot optimize the resources allocation while guaranteeing the service delay constraint. To fulfill this goal, we propose a Layered Graph based SFC Orchestration Scheme (LGOS). LGOS converts both the cost of resource and the related delay into the link weights in the layered graph, which helps abstract the SFC orchestration problem as a shortest path problem. Then a simulated annealing based batch processing algorithm is designed for SFC requests set. Through extensive evaluations, we demonstrated that our scheme can reduce the end-to-end delay and the operational expenditure by 21.6% and 13.7% at least, and the acceptance ratio of requests set can be improved by 22.3%, compared with other algorithms.

We propose a novel compositing pipeline and a dynamic load balancing technique for volume rendering which utilizes a two-layered group structure to achieve effective and scalable load balancing. The technique enables each process to render data from non-contiguous regions of the volume with minimal impact on the total render time. We demonstrate the effectiveness of the proposed technique by performing a set of experiments on a modern GPU cluster. The experiments show that using the technique results in up to a 35.7% lower worst-case memory usage as compared to a dynamic k-d tree load balancing technique, whilst simultaneously achieving similar or higher render performance. The proposed technique was also able to lower the amount of transferred data during the load balancing stage by up to 72.2%. The technique has the potential to be used in many scenarios where other dynamic load balancing techniques have proved to be inadequate, such as during large-scale visualization.

Convolutional neural networks (CNNS) have a strong ability to understand and judge images. However, the enormous parameters and computation of CNNS have limited its application in resource-limited devices. In this letter, we used the idea of parameter sharing and dense connection to compress the parameters in the convolution kernel channel direction, thus greatly reducing the number of model parameters. On this basis, we designed Shared and Dense Channel-wise Convolutional Networks (SDChannelNets), mainly composed of Depth-wise Separable SD-Channel-wise Convolution layer. The advantage of SDChannelNets is that the number of model parameters is greatly reduced without or with little loss of accuracy. We also introduced a hyperparameter that can effectively balance the number of parameters and the accuracy of a model. We evaluated the model proposed by us through two popular image recognition tasks (CIFAR-10 and CIFAR-100). The results showed that SDChannelNets had similar accuracy to other CNNs, but the number of parameters was greatly reduced.

Volleyball video analysis plays important roles in providing data for TV contents and developing strategies. Among all the topics of volleyball analysis, qualitative player action recognition is essential because it potentially provides not only the action that being performed but also the quality, which means how well the action is performed. However, most action recognition researches focus on the discrimination between different actions. The quality of an action, which is helpful for evaluation and training of the player skill, has only received little attention so far. The vital problems in qualitative action recognition include occlusion, small inter-class difference and various kinds of appearance caused by the player change. This paper proposes a 3D global and multi-view local features combination based recognition framework with global team formation feature, ball state feature and abrupt pose features. The above problems are solved by the combination of 3D global features (which hide the unstable and incomplete 2D motion feature caused by occlusion) and the multi-view local features (which get detailed local motion features of body parts in multiple viewpoints). Firstly, the team formation extracts the 3D trajectories from the whole team members rather than a single target player. This proposal focuses more on the entire feature while eliminating the personal effect. Secondly, the ball motion state feature extracts features from the 3D ball trajectory. The ball motion is not affected by the personal appearance, so this proposal ignores the influence of the players appearance and makes it more robust to target player change. At last, the abrupt pose feature consists of two parts: the abrupt hit frame pose (which extracts the contour shape of the player's pose at the hit time) and abrupt pose variation (which extracts the pose variation between the preparation pose and ending pose during the action). These two features make difference of each action quality more distinguishable by focusing on the motion standard and stability between different quality actions. Experiments are conducted on game videos from the Semifinal and Final Game of 2014 Japan Inter High School Games of Men's Volleyball in Tokyo Metropolitan Gymnasium. The experimental results show the accuracy achieves 97.26%, improving 11.33% for action discrimination and 91.76%, and improving 13.72% for action quality evaluation.

This letter presents ternary convolutional codes and their punctured codes with optimum distance spectrum.

Optical circuits using nanophotonic devices attract significant interest due to its ultra-high speed operation. As a consequence, the synthesis methods for the optical circuits also attract increasing attention. However, existing methods for synthesizing optical circuits mostly rely on straight-forward mappings from established data structures such as Binary Decision Diagram (BDD). The strategy of simply mapping a BDD to an optical circuit sometimes results in an explosion of size and involves significant power losses in branches and optical devices. To address these issues, this paper proposes a method for reducing the size of BDD-based optical logic circuits exploiting wavelength division multiplexing (WDM). The paper also proposes a method for reducing the number of branches in a BDD-based circuit, which reduces the power dissipation in laser sources. Experimental results obtained using a partial product accumulation circuit used in a 4-bit parallel multiplier demonstrates significant advantages of our method over existing approaches in terms of area and power consumption.

This paper investigates the problem of variable-length intrinsic randomness for a general source. For this problem, we can consider two performance criteria based on the variational distance: the maximum and average variational distances. For the problem of variable-length intrinsic randomness with the maximum variational distance, we derive a general formula of the average length of uniform random numbers. Further, we derive the upper and lower bounds of the general formula and the formula for a stationary memoryless source. For the problem of variable-length intrinsic randomness with the average variational distance, we also derive a general formula of the average length of uniform random numbers.

Mobile video traffic is expected to increase explosively because of the proliferating number of Wi-Fi terminals. An overloaded multiple-input multiple-output (MIMO) technique allows the receiver to implement smaller number of antennas than the transmitter in exchange for degradation in video quality and a large amount of computational complexity for postcoding at the receiver side. This paper proposes a novel linear precoder for high-quality video streaming in overloaded multiuser MIMO systems, which protects visually significant portions of a video stream. A low complexity postcoder is also proposed, which detects some of data symbols by linear detection and the others by a prevoting vector cancellation (PVC) approach. It is shown from simulation results that the combination use of the proposed precoder and postcoder achieves higher-quality video streaming to multiple users in a wider range of signal-to-noise ratio (SNR) than a conventional unequal error protection scheme. The proposed precoder attains 40dB in peak signal-to-noise ratio even in poor channel conditions such as the SNR of 12dB. In addition, due to the stepwise acquisition of data symbols by means of linear detection and PVC, the proposed postcoder reduces the number of complex additions by 76% and that of multiplications by 64% compared to the conventional PVC.