This paper provides a new method to correct annotation errors in a treebank. The previous error correction method constructs a pseudo parallel corpus where incorrect partial parse trees are paired with correct ones, and extracts error correction rules from the parallel corpus. By applying these rules to a treebank, the method corrects errors. However, this method does not achieve wide coverage of error correction. To achieve wide coverage, our method adopts a different approach. In our method, we consider that if an infrequent pattern can be transformed to a frequent one, then it is an annotation error pattern. Based on a tree mining technique, our method seeks such infrequent tree patterns, and constructs error correction rules each of which consists of an infrequent pattern and a corresponding frequent pattern. We conducted an experiment using the Penn Treebank. We obtained 1,987 rules which are not constructed by the previous method, and the rules achieved good precision.

In this paper, we study robust Principal Component Analysis (PCA)-based anomaly detection techniques in network traffic, which can detect traffic anomalies by projecting measured traffic data onto a normal subspace and an anomalous subspace. In a PCA-based anomaly detection, outliers, anomalies with excessively large traffic volume, may contaminate the subspaces and degrade the performance of the detector. To solve this problem, robust PCA methods have been studied. In a robust PCA-based anomaly detection scheme, outliers can be removed from the measured traffic data before constructing the subspaces. Although the robust PCA methods are promising, they incure high computational cost to obtain the optimal location vector and scatter matrix for the subspace. We propose a novel anomaly detection scheme by extending the minimum covariance determinant (MCD) estimator, a robust PCA method. The proposed scheme utilizes the daily periodicity in traffic volume and attempts to detect anomalies for every period of measured traffic. In each period, before constructing the subspace, outliers are removed from the measured traffic data by using a location vector and a scatter matrix obtained in the preceding period. We validate the proposed scheme by applying it to measured traffic data in the Abiline network. Numerical results show that the proposed scheme provides robust anomaly detection with less computational cost.

In this paper, Epitaxial (Epi) Junction Termination Extension (JTE) technique for silicon carbide (SiC) power device is presented. Unlike conventional JTE, the Epi-JTE doesn't require high temperature (about 500°C) implantation process. Thus, it doesn't require high temperature (about 1700°C) process for implanted dose activation and surface defect curing. Therefore, the manufacturing cost will be decreased. Also, the fabrication process is very simple because the dose of the JTE is controlled by epitaxy growth. The blocking characteristic is analyzed through 2D-simulation for the proposed Epi-JTE. In addition, the effect was validated by experiment of fabricated SiC device with the Single-Zone-Epi-JTE. As a result, it has blocking capability of 79.4% compared to ideal parallel-plane junction breakdown.

The equivalent anisotropic material parameters of metal dummy fills in a CMOS chip were extracted through an eigenmode analysis of a unit-cell of a space filled with metal dummies. The validity of the parameters was confirmed by comparing the S-parameters of a parallel-plate waveguide with the metal dummy fills and their effective material properties. The validity of the effective material properties was also confirmed by using them in a simulation of an on-chip dipole antenna.

In this paper, the posterior matching scheme proposed by Shayevits and Feder is extended to the Gaussian broadcast channel with feedback, and the error probabilities and achievable rate region are derived for this coding strategy by using the iterated random function theory. A variant of the Ozarow-Leung code for the general two-user broadcast channel with feedback can be realized as a special case of our coding scheme. Furthermore, for the symmetric Gaussian broadcast channel with feedback, our coding scheme achieves the linear-feedback sum-capacity like the LQG code and outperforms the Kramer code.

To improve the quality of waveforms and achieve a high input power factor (IPF) for matrix rectifier, a novel quasi sliding mode control (SMC) with adaptive compensation is proposed in this letter. Applying quasi-SMC can effective obviate the disturbances of time delay and spatial lag, and SMC based on continuous function is better than discontinuous function to eliminate the chattering. Furthermore, compared with conventional compensation, an adaptive quasi-SMC compensation without any accurate detection for internal parameters is easier to be implementated, which has shown a superior advance. Theoretical analysis and experiments are carried out to validate the correctness of the novel control scheme.

The biometrical identification system, introduced by Willems et al., is a system to identify individuals based on their measurable physical characteristics. Willems et al. characterized the identification capacity of a discrete memoryless biometrical identification system from information theoretic perspectives. Recently, Mori et al. have extended this scenario to list-decoding whose list size is an exponential function of the data length. However, as the data length increases, how the maximum identification error probability (IEP) behaves for a given rate has not yet been characterized for list-decoding. In this letter, we investigate the reliability function of the system under fixed-size list-decoding, which is the optimal exponential behavior of the maximum IEP. We then use Arimoto's argument to analyze a lower bound on the maximum IEP with list-decoding when the rate exceeds the capacity, which leads to the strong converse theorem. All results are derived under the condition that an unknown individual need not be uniformly distributed and the identification process is done without the knowledge of the prior distribution.

In this letter, a simple and robust synchronization algorithm for second generation terrestrial digital video broadcasting (DVB-T2) receivers is proposed. In the proposed detection scheme, the coarse symbol timing is estimated by decimating a correlation output to give a sharper peak timing detection metric. Such a design can improve the timing synchronization accuracy as well as enhance its robustness to frequency selective channels.

Existing studies on transportation mode detection from global positioning system (GPS) trajectories mainly adopt handcrafted features. These features require researchers with a professional background and do not always work well because of the complexity of traffic behavior. To address these issues, we propose a model using a sparse autoencoder to extract point-level deep features from point-level handcrafted features. A convolution neural network then aggregates the point-level deep features and generates a trajectory-level deep feature. A deep neural network incorporates the trajectory-level handcrafted features and the trajectory-level deep feature for detecting the users' transportation modes. Experiments conducted on Microsoft's GeoLife data show that our model can automatically extract the effective features and improve the accuracy of transportation mode detection. Compared with the model using only handcrafted features and shallow classifiers, the proposed model increases the maximum accuracy by 6%.

High Efficiency Video Coding (HEVC) is the latest coding standard. Compared with Advanced Video coding (H.264/AVC), HEVC offers about a 50% bitrate reduction at the same reconstructed video quality. However, this new coding standard leads to enormous computational complexity, which makes it difficult to encode video in real time. Therefore, in this paper, aiming at the high complexity of intra coding in HEVC, a new fast coding unit (CU) splitting algorithm is proposed based on the decision tree. Decision tree, as a method of machine learning, can be designed to determine the size of CUs adaptively. Here, two significant features, Just Noticeable Difference (JND) values and coding bits of each CU can be extracted to train the decision tree, according to their relationships with the CUs' partitions. The experimental results have revealed that the proposed algorithm can save about 34% of time, on average, with only a small increase of BD-rate under the “All_Intra” setting, compared with the HEVC reference software.

This paper proposes the statistical analysis of phase-only correlation functions between two real signals with phase-spectrum differences. For real signals, their phase-spectrum differences have odd-symmetry with respect to frequency indices. We assume phase-spectrum differences between two signals to be random variables. We next derive the expectation and variance of the POC functions considering the odd-symmetry of the phase-spectrum differences. As a result, the expectation and variance of the POC functions can be expressed by characteristic functions or trigonometric moments of the phase-spectrum differences. Furthermore, it is shown that the peak value of the POC function monotonically decreases and the sidelobe values monotonically increase as the variance of the phase-spectrum differences increases.

High Efficiency Video Coding is a new video coding standard after H.264/AVC. By introducing a flexible coding unit, which can be recursively divided from 64×64 to 8×8 blocks in a Quadtree-Structure, HEVC achieves significantly higher coding efficiency than the previous standards. With the flexible CU structure, HEVC can effectively adapt to highly varying contents with a smaller CU or to flat contents with a larger CU, making it suitable for applications from mobile video to super high definition television. On the other hand, CU division does incur high computational cost for HEVC. In this paper, we propose a simple and fast CU division algorithm by using only a subset of pixels to determine when CU division happens. Experiment results show that our algorithm can achieve prediction quality close to HEVC Test Model with much lower computational cost.

In this paper, the virtual antenna technique is applied to a single input multiple output (SIMO) radar system to enhance the performance of the conventional beamforming direction of arrival (DOA) estimation method. Combining the virtual array generated by the interpolated array technique and the real array, the angular resolution of the DOA estimation algorithm is improved owing to the extended number of antennas and aperture size. Based on the proposed interpolation technique, we transform the position of the antenna elements in a uniform linear array (ULA) to the arbitrary positions to suppress the grating lobe and side lobe levels. In simulations, the pseudo spectrum of the Bartlett algorithm and the root mean square error (RMSE) of the DOA estimation with the signal-to-noise ratio (SNR) are analyzed for the real array and the proposed virtually extended array. Simulation results show that the angular resolution of the proposed array is better than that of the real array using the same aperture size of array and the number of antennas. The proposed technique is verified with the practical data from commercialized radar system.

This paper proposes performance improvement schemes for non-coherent multiple-input multiple-output (MIMO) communication systems employing per transmit antenna differential mapping (PADM). PADM is one form of differential space-time coding (DSTC), which generates an independent differentially encoded sequence for each of the multiple transmit antennas by means of space-time coding and mapping. The features of the proposed schemes are as follows: 1) it employs an asymmetric space-time mapping instead of the conventional symmetric space-time mapping in order to lower the required signal to noise power ratio (SNR) for maintaining the bit error rate (BER) performance; 2) it employs an analytically derived branch metric criterion based on channel prediction for per-survivor processing (PSP) in order to track fast time-varying channels. Finally, computer simulation results confirm that the proposed schemes improve the required SNR by around 1dB and can track at the maximum Doppler frequency normalized by symbol rate of 5%.

The measurement accuracy of frequency difference of arrival (FDOA) is usually determinant for emitters location system using rapidly moving receivers. The classic technique of expanding the integration time of the cross ambiguity function (CAF) to achieve better performance of FDOA is likely to incur a significant computational burden especially for wideband signals. In this paper, a nonconsecutive short-time CAF's methods is proposed with expansion of root mean square (RMS) integration time, instead of the integration time, and a factor of estimation precision improvement is given which is relative to the general consecutive method. Furthermore, by analyzing the characteristic of coherent CAF and the influence of FDOA rate, an upper bound of the precision improvement factor is derived. Simulation results are provided to confirm the effectiveness of the proposed method.

This paper investigates the performance of an overloaded multiple-input multiple-output (MIMO) - orthogonal frequency division multiplexing (OFDM) system with and without antenna selection. In the overloaded MIMO-OFDM system, even if only a small amount of feedback is available, performance can be improved by selecting the transmit antennas. Thus, this paper compares the performance of an overloaded MIMO system with and without antenna selection under different code rates. It is shown that the performance of the MIMO-OFDM system for six signal streams with QPSK modulation is about 2.0dB better than that for three signal streams with 16QAM modulation while it is about 5.0dB better than that of the MIMO-OFDM system for two signal streams with 64QAM modulation at a bit error rate (BER) of 10-3. However, it is also shown that the performance of the overloaded MIMO system is worse if the code rate of the repetition code increases.

In this paper, a miniaturized absorptive/transmissive radome with switchable passband and wide absorbing band is designed. Pin diodes are loaded on the radome in order to obtain switchable passband and miniaturized unit cells, while the resistor loaded double square loops are used to absorb the incident wave. The total thickness of the radome is only 4.5mm. Its transmission and absorbing properties are verified by both synthetic experiments and measurements in the anechoic chamber. Furthermore, the switchable passband of the radome is also evaluated using a waveguide simulator.

Nowadays, vector map content is widely used in the areas of life, science and the military. Due to the fact that vector maps bring great value and that their production process is expensive, a large volume of vector map data is attacked, stolen and illegally distributed by pirates. Thus, vector map data must be encrypted before being stored and transmitted in order to ensure the access and to prevent illegal copying. This paper presents a novel perceptual encryption algorithm for ensuring the secured storage and transmission of vector map data. Polyline data of vector maps are extracted to interpolate a spline curve, which is represented by an interpolating vector, the curvature degree coefficients, and control points. The proposed algorithm is based on encrypting the control points of the spline curve in the frequency domain of discrete cosine transform. Control points are transformed and selectively encrypted in the frequency domain of discrete cosine transform. They are then used in an inverse interpolation to generate the encrypted vector map. Experimental results show that the entire vector map is altered after the encryption process, and the proposed algorithm is very effective for a large dataset of vector maps.

Content extraction from deep Web pages has received great attention in recent years. However, the increasingly complicated HTML structure of Web documents makes it more difficult to recognize the data records by only analyzing the HTML source code. In this paper, we propose a method named LTDE to extract data records from a deep Web page. Instead of analyzing the HTML source code, LTDE utilizes the visual features of data records in deep Web pages. A Web page is considered as a finite set of visual blocks. The data records are the visual blocks that have similar layout. We also propose a pattern recognizing method named layout tree to cluster the similar layout visual blocks. The weight of all clusters is calculated, and the visual blocks in the cluster that has the highest weight are chosen as the data records to be extracted. The experiment results show that LTDE has higher effectiveness and better robustness for Web data extraction compared to previous works.

A high-image-rejection wireless receiver with an N-phase active RC complex filter is proposed and analyzed. Signal analysis shows that the double-conversion receiver with (N+N2) mixers corrects the gain and phase mismatches of the adjacent image. Monte Carlo simulations evaluate the relation between image-rejection performances and the dispersions of device parameters for the double-conversion wireless receiver. The Monte Carlo simulations show that the image rejection ratio of the adjacent image depends almost only on R and C mismatches in the complex filter.