This paper introduces significant improvements over the existing cryptanalysis approaches on Salsa20 and ChaCha stream ciphers. For the first time, we reduced the attack complexity on Salsa20/8 to the lowest possible margin. We introduced an attack on ChaCha7.25. It is the first attack of its type on ChaCha7.25/20. In our approach, we studied differential cryptanalysis of the Salsa20 and ChaCha stream ciphers based on a comprehensive analysis of probabilistic neutral bits (PNBs). The existing differential cryptanalysis approaches on Salsa20 and ChaCha stream ciphers first study the differential bias at specific input and output differential positions and then search for probabilistic neutral bits. However, the differential bias and the set of PNBs obtained in this method are not always the ideal combination to conduct the attack against the ciphers. The researchers have not focused on the comprehensive analysis of the probabilistic neutrality measure of all key bits concerning all possible output difference positions at all possible internal rounds of Salsa20 and ChaCha stream ciphers. Moreover, the relationship between the neutrality measure and the number of inverse quarter rounds has not been scrutinized yet. To address these study gaps, we study the differential cryptanalysis based on the comprehensive analysis of probabilistic neutral bits on the reduced-round Salsa20 and ChaCha. At first, we comprehensively analyze the neutrality measure of 256 key bits positions. Afterward, we select the output difference bit position with the best average neutrality measure and look for the corresponding input differential with the best differential bias. Considering all aspects, we present an attack on Salsa20/8 with a time complexity of 2241.62 and data complexity of 231.5, which is the best-known single bit differential attack on Salsa20/8 and then, we introduced an attack on ChaCha7.25 rounds with a time complexity of 2254.011 and data complexity of 251.81.

In industry, automatic speech recognition has come to be a competitive feature for embedded products with poor hardware resources. In this work, we propose a tiny end-to-end speech recognition model that is lightweight and easily deployable on edge platforms. First, instead of sophisticated network structures, such as recurrent neural networks, transformers, etc., the model we propose mainly uses convolutional neural networks as its backbone. This ensures that our model is supported by most software development kits for embedded devices. Second, we adopt the basic unit of MobileNet-v3, which performs well in computer vision tasks, and integrate the features of the hidden layer at different scales, thus compressing the number of parameters of the model to less than 1 M and achieving an accuracy greater than that of some traditional models. Third, in order to further reduce the CPU computation, we directly extract acoustic representations from 1-dimensional speech waveforms and use a self-supervised learning approach to encourage the convergence of the model. Finally, to solve some problems where hardware resources are relatively weak, we use a prefix beam search decoder to dynamically extend the search path with an optimized pruning strategy and an additional initialism language model to capture the probability of between-words in advance and thus avoid premature pruning of correct words. In our experiments, according to a number of evaluation categories, our end-to-end model outperformed several tiny speech recognition models used for embedded devices in related work.

In a free-space method using a pair of horn antennas with dielectric lenses, we demonstrated that the permittivity of a sample can be estimated with good accuracy by equalizing a measured transmission coefficient of a sample to a transmission coefficient for a Gaussian beam, which is approximately equal to the transmission coefficient for a plane wave multiplied by a term that changes the phase. In this permittivity estimation method, because the spot size at the beam waist in a Gaussian beam needs to be determined, we proposed an estimation method of the spot size by employing the measurement of the Line in Thru-Reflect-Line calibration; thus, no additional measurement is required. The permittivity estimation method was investigated for the E-band (60-90 GHz), and it was demonstrated that the relative permittivity of air with a thickness of 2mm and a sample with the relative permittivity of 2.05 and a thickness of 1mm is estimated with errors less than ±0.5% and ±0.2%, respectively. Moreover, in measuring a sample without displacing the receiving horn antenna to avoid the error in measurement, we derived an expression of the permittivity estimation for S parameters measured using a vector network analyzer, and demonstrated that the measurement of a sample without antenna displacement is valid.

Pseudorandom sequences with large linear complexity can resist the linear attack. The trace representation plays an important role in analysis and design of pseudorandom sequences. In this letter, we present the construction of a family of new binary sequences derived from Euler quotients modulo pq, where pq is a product of two primes and p divides q-1. Firstly, the linear complexity of the sequences are investigated. It is proved that the sequences have larger linear complexity and can resist the attack of Berlekamp-Massey algorithm. Then, we give the trace representation of the proposed sequences by determining the corresponding defining pair. Moreover, we generalize the result to the Euler quotients modulo pmqn with m≤n. Results indicate that the generalized sequences still have high linear complexity. We also give the trace representation of the generalized sequences by determining the corresponding defining pair. The result will be helpful for the implementation and the pseudorandom properties analysis of the sequences.

High gain antennas with narrow-beamforming are required to compensate for the high propagation loss expected in high frequency bands such as the millimeter wave and sub-terahertz wave bands, which are promising for achieving extremely high speeds and capacity. However using narrow-beamforming for initial access (IA) beam search in all directions incurs an excessive overhead. Using wide-beamforming can reduce the overhead for IA but it also shrinks the coverage area due to the lower beamforming gain. Here, it is assumed that there are some situations in which the required coverage distance differs depending on the direction from the antenna. For example, the distance to an floor for a ceiling-mounted antenna varies depending on the direction, and the distance to the obstruction becomes the required coverage distance for an antenna installation design that assumes line-of-sight. In this paper, we propose a novel IA beam search scheme with adaptive beam width control based on the distance to shield obstacles in each direction. Simulations and experiments show that the proposed method reduces the overhead by 20%-50% without shrinking the coverage area in shield environments compared to exhaustive beam search with narrow-beamforming.

In this study, the bending losses of chalcogenide glass channel optical waveguides consisting of an As2Se3 core and an As2S3 lower cladding layer were numerically evaluated across the astronomical N-band, which is the mid-infrared spectral range between the 8 µm and 12 µm wavelengths. The results reveal the design rules for bent waveguides in mid-infrared astrophotonic devices.

In this letter, we propose an energy beamforming empowered relaying scheme for a batteryless IoT network, where wireless-powered relays are deployed between the hybrid access point (HAP) and batteryless IoT devices to assist the uplink information transmission from the devices to the HAP. In particular, the HAP first exploits energy beamforming to efficiently transmit radio frequency (RF) signals to transfer energy to the relays and as the incident signals to enable the information backscattering of batteryless IoT devices. Then, each relay uses the harvested energy to forward the decoded signals from its corresponding batteryless IoT device to the HAP, where the maximum-ratio combing is used for further performance improvement. To maximize the network sum-rate, the joint optimization of energy beamforming vectors at the HAP, network time scheduling, power allocation at the relays, and relection coefficient at the users is investigated. As the formulated problem is non-convex, we propose an alternating optimization algorithm with the variable substitution and semi-definite relaxation (SDR) techniques to solve it efficiently. Specifically, we prove that the obtained energy beamforming matrices are always rank-one. Numerical results show that compared to the benchmark schemes, the proposed scheme can achieve a significant sum-rate gain.

Construction of resilient Boolean functions in odd variables having strictly almost optimal (SAO) nonlinearity appears to be a rather difficult task in stream cipher and coding theory. In this paper, based on the modified High-Meets-Low technique, a general construction to obtain odd-variable SAO resilient Boolean functions without directly using PW functions or KY functions is presented. It is shown that the new class of functions possess higher resiliency order than the known functions while keeping higher SAO nonlinearity, and in addition the resiliency order increases rapidly with the variable number n.

This paper proposes a novel random access identifier (RAID)-linked receiver beamforming method for time division duplex (TDD)-based random access. When the number of receiver antennas at the base station is large in a massive multiple-input multiple-output (MIMO) scenario, the channel estimation accuracy per receiver antenna at the base station receiver is degraded due to the limited received signal power per antenna from the user terminal. This results in degradation in the receiver beamforming (BF) or antenna diversity combining and active RAID detection. The purpose of the proposed method is to achieve accurate active RAID detection and channel estimation with a reasonable level of computational complexity at the base station receiver. In the proposed method, a unique receiver BF vector applied at the base station is linked to each of the M RAIDs prepared by the system. The user terminal selects an appropriate pair comprising a receiver BF vector and a RAID in advance based on the channel estimation results in the downlink assuming channel reciprocity in a TDD system. Therefore, per-receiver antenna channel estimation for receiver BF is not necessary in the proposed method. Furthermore, in order to utilize fully the knowledge of the channel at the user transmitter, we propose applying transmitter filtering (TF) to the proposed method for effective channel shortening in order to increase the orthogonal preambles for active RAID detection and channel estimation prepared for each RAID. Computer simulation results show that the proposed method greatly improves the accuracy of active RAID detection and channel estimation. This results in lower error rates than that for the conventional method performing channel estimation at each antenna in a massive MIMO environment.

A path loss prediction formula for IoT (Internet of Things) wireless communication close to ceiling beams in the 920MHz band is presented. In first step of our investigation, we conduct simulations using the FDTD (Finite Difference Time Domain) method and propagation tests close to a beam on the ceiling of a concrete building. In the second step, we derive a path loss prediction formula from the simulation results by using the FDTD method, by dividing into three regions of LoS (line-of-sight) situation, situation in the vicinity of the beam, and NLoS (non-line-of-sight) situation, depending on the positional relationship between the beam and transmitter (Tx) and receiver (Rx) antennas. For each condition, the prediction formula is expressed by a relatively simple form as a function of height of the antennas with respect to the beam bottom. Thus, the prediction formula is very useful for the wireless site planning for the IoT wireless devices set close to concrete beam ceiling.

Distributed array radars consist of multiple sub-arrays separated by tens to hundreds of wavelengths and can match narrow beamwidths with large-aperture, high-gain antennas. The physical independence of the sub-arrays contributes to significant structure flexibility and is one of the advantages of such radars. However, a typical problem is the grating lobes in the digital beam forming (DBF) beam pattern. Unfortunately, the need to suppress the generation of grating lobes makes the design of acceptable sub-array arrangements very difficult. A sigma-delta beam former direction of arrival (DOA) estimation method is proposed in this study to solve this problem. The proposed method performs DOA estimation by acquiring the difference signals in addition to the sum signals of all sub-arrays. The difference signal is typically used for monopulse DOA estimation in the phased array radar. The sigma-delta beamformer simultaneously has both advantages of DOA estimations using a distributed array with a large aperture length and using a sub-array that is not affected by the grating lobe. The proposed method can improve the DOA estimation accuracy over the conventional method under grating lobe situations and help the distributed array radar achieve flexibility in the sub-array arrangement. Numerical simulations are presented to verify the effectiveness of the proposed DOA estimation method.

This paper presents a novel frequency-controlled beam steering scheme for a phased-array antenna system (PAS). The proposed scheme employs phase-controlled carrier signals to form the PAS beam. Two local oscillators (LOs) and delay lines are used to generate the carrier signals. The carrier of one LO is divided into branches, and then the divided carriers passing through the corresponding delay lines have the desired phase relationship, which depends on the oscillation frequency of the LO. To confirm the feasibility of the scheme, four-branch PAS transmitters are configured and tested in a 10-GHz frequency band. The results verify that the formed beam is successfully steered in a wide range, i.e., the 3-dB beamwidth of approximately 100 degrees, using LO frequency control.

This paper shows structural optimal design of optical waveguide components utilizing an efficient 3D frequency-domain and 2D time-domain beam propagation method (BPM) with an alternating direction implicit (ADI) scheme. Usual optimal design procedure is based on iteration of numerical simulation, and total computational cost of the optimal design mainly depends on the efficiency of numerical analysis method. Since the system matrices are tridiagonal in the ADI-based BPM, efficient analysis and optimal design are available. Shape and topology optimal design shown in this paper is based on optimization of density distribution and sensitivity analysis to the density parameters. Computational methods of the sensitivity are shown in the case of using the 3D semi-vectorial and 2D time-domain BPM based on ADI scheme. The validity of this design approach is shown by design of optical waveguide components: mode converters, and a polarization beam splitter.

A sub-Terahertz band is envisioned to play a great role in 6G to achieve extreme high data-rate communication. In addition to very wide band transmission, we need spatial multiplexing using a hybrid MIMO system. A recently presented paper, however, reveals that the number of observed multipath components in a sub-Terahertz band is very few in indoor environments. A channel with few multipath components is called sparse. The number of layers (streams), i.e. multiplexing gain in a MIMO system does not exceed the number of multipaths. The sparsity may restrict the spatial multiplexing gain of sub-Terahertz systems, and the poor multiplexing gain may limit the data rate of communication systems. This paper describes fundamental considerations on sub-Terahertz MIMO spatial multiplexing in indoor environments. We examined how we should steer analog beams to multipath components to achieve higher channel capacity. Furthermore, for different beam allocation schemes, we investigated eigenvalue distributions of a channel Gram matrix, power allocation to each layer, and correlations between analog beams. Through simulation results, we have revealed that the analog beams should be steered to all the multipath components to lower correlations and to achieve higher channel capacity.

The expansion of the communication area is expected for Beyond-5G/6G networks using the High Altitude Platform Station (HAPS), Internet of Things (IoT), and sensor devices. Beyond-5G/6G networks constitute the vast amounts of devices that require the latest power utilization system. We expect Microwave Power Transfer (MPT) plays a role in the wireless power supply to HAPS, IoT, and sensors in this network. This work discusses the link design and techniques of MPT for the newest power utilization system required on Beyond-5G/6G networks.

Multibeam massive multiple-input multiple-output (MIMO) configuration has been proposed that selects high-power beams in an analog part and uses a blind algorithm, such as the constant-modulus algorithm (CMA), in the digital part. The CMA does not require channel state information. However, when least-squares CMA (LS-CMA) is applied to a quadrature amplitude modulation signal whose amplitude changes, the interference cancellation effect decreases as the modulation order increases. In this paper, a variable-step-size-based CMA (VS-CMA), which modifies the step size of the steepest-descent CMA, is proposed as a blind adaptive algorithm to replace LS-CMA. The basic performance of VS-CMA, its success in cancelling interference, and its effectiveness in multibeam massive MIMO transmission are verified via simulation and compared with other blind algorithms such as independent component analysis, particularly when the data smoothing size is small.

A multibeam massive multiple input multiple output (MIMO) configuration employs beam selection with high power in the analog part and executes a blind algorithm such as the independent component analysis (ICA), which does not require channel state information in the digital part. Two-dimensional (2-D) multibeams are considered in actual power losses and beam steering errors regarding the multibeam patterns. However, the performance of these 2-D beams depends on the beam pattern of the multibeams, and they are not optimal multibeam patterns suitable for multibeam massive MIMO configurations. In this study, we clarify the performance difference due to the difference of the multibeam pattern and consider the multibeam pattern suitable for the system condition. Specifically, the optimal multibeam pattern was determined with the element spacing and beamwidth of the element directivity as parameters, and the effectiveness of the proposed method was verified via computer simulations.

Tile-based virtual reality (VR) video consists of high-resolution tiles that are displayed in accordance with the users' viewing directions and a low-resolution tile that is the entire VR video and displayed when users change their viewing directions. Whether users perceive quality degradation when watching tile-based VR video depends on high-resolution tile size, the quality of high- and low-resolution tiles, and network condition. The display time of low-resolution tile (hereafter delay) affects users' perceived quality because longer delay makes users watch the low-resolution tiles longer. Since these degradations of low-resolution tiles markedly affect users' perceived quality, these points have to be considered in the quality-estimation model. Therefore, we propose a bitstream-quality-estimation model for tile-based VR video streaming services and investigate the effect of bitstream parameters and delay on tile-based VR video quality. Subjective experiments on several videos of different qualities and a comparison between other video quality-estimation models were conducted. In this paper, we prove that the proposed model can improve the quality-estimation accuracy by using the high- and low-resolution tiles' quantization parameters, resolution, framerate, and delay. Subjective experimental results show that the proposed model can estimate the quality of tile-based VR video more accurately than other video quality-estimation models.

We study the continuous similarity search problem for evolving queries which has recently been formulated. Given a data stream and a database composed of n sets of items, the purpose of this problem is to maintain the top-k most similar sets to the query which evolves over time and consists of the latest W items in the data stream. For this problem, the previous exact algorithm adopts a pruning strategy which, at the present time T, decides the candidates of the top-k most similar sets from past similarity values and computes the similarity values only for them. This paper proposes a new exact algorithm which shortens the execution time by computing the similarity values only for sets whose similarity values at T can change from time T-1. We identify such sets very fast with frequency-based inverted lists (FIL). Moreover, we derive the similarity values at T in O(1) time by updating the previous values computed at time T-1. Experimentally, our exact algorithm runs faster than the previous exact algorithm by one order of magnitude and as fast as the previous approximation algorithm.

In this paper, the sum cell rate based on altruistic and egoistic multicell distributed beamforming (MDBF) is studied with local channel state Information (CSI). To start with, we provide two sufficient conditions for implementing altruistic and egoistic strategy based on the traditional method, and give the proof of those condition. Second, a MDBF method based on the altruistic and egoistic strategy is proposed, where the altruistic strategy is implemented with the internal penalty function. Finally, simulation results demonstrate that the effectiveness of the sufficient conditions and the proposed method has the different performance and advantages.