Mitsuhiko KATAGIRI Shofu MATSUDA Norio NAGAYAMA Minoru UMEDA
We describe the preparation of an α-phenyl-4'-(diphenylamino)stilbene (TPA) single crystal and the evaluation of its hole transport property. Based on the characterization using optical microscopy, polarizing microscopy, and X-ray diffraction, a large-scale TPA single crystal of dimensions 7.0×0.9×0.8mm is successfully synthesized using a solution method based on the solubility and supersolubility curves of the TPA. Notably, the current in the long-axis direction is larger than those in the short-axis and thickness directions (i(long) > i(short) > i(thickness)), which reveals the anisotropic charge transfer of the TPA single crystal. The observed anisotropic conductivity is well explained by the orientation of the triphenylamine unit in the TPA single crystal. Furthermore, the activation energy of the long-axis direction in the TPA single crystal is lower than that of the short-axis in TPA and all the axes in the α-phenyl-4'-[bis(4-methylphenyl)amino]stilbene single crystal reported in our previous study.
Xiao-yu WAN Xiao-na YANG Zheng-qiang WANG Zi-fu FAN
This paper investigates energy-efficient resource allocation problem for the wireless power transfer (WPT) enabled multi-user massive multiple-input multiple-output (MIMO) systems. In the considered systems, the sensor nodes (SNs) are firstly powered by WPT from the power beacon (PB) with a large scale of antennas. Then, the SNs use the harvested energy to transmit the data to the base station (BS) with multiple antennas. The problem of optimizing the energy efficiency objective is formulated with the consideration of maximum transmission power of the PB and the quality of service (QoS) of the SNs. By adopting fractional programming, the energy-efficient optimization problem is firstly converted into a subtractive form. Then, a joint power and time allocation algorithm based on the block coordinate descent and Dinkelbach method is proposed to maximize energy efficiency. Finally, simulation results show the proposed algorithm achieves a good compromise between the spectrum efficiency and total power consumption.
Chanyoung OH Saehanseul YI Youngmin YI
As energy efficiency has become a major design constraint or objective, heterogeneous manycore architectures have emerged as mainstream target platforms not only in server systems but also in embedded systems. Manycore accelerators such as GPUs are getting also popular in embedded domains, as well as the heterogeneous CPU cores. However, as the number of cores in an embedded GPU is far less than that of a server GPU, it is important to utilize both heterogeneous multi-core CPUs and GPUs to achieve the desired throughput with the minimal energy consumption. In this paper, we present a case study of mapping LBP-based face detection onto a recent CPU-GPU heterogeneous embedded platform, which exploits both task parallelism and data parallelism to achieve maximal energy efficiency with a real-time constraint. We first present the parallelization technique of each task for the GPU execution, then we propose performance and energy models for both task-parallel and data-parallel executions on heterogeneous processors, which are used in design space exploration for the optimal mapping. The design space is huge since not only processor heterogeneity such as CPU-GPU and big.LITTLE, but also various data partitioning ratios for the data-parallel execution on these heterogeneous processors are considered. In our case study of LBP face detection on Exynos 5422, the estimation error of the proposed performance and energy models were on average -2.19% and -3.67% respectively. By systematically finding the optimal mappings with the proposed models, we could achieve 28.6% less energy consumption compared to the manual mapping, while still meeting the real-time constraint.
Yusuke INOUE Takatsugu ONO Koji INOUE
On-line object tracking (OLOT) has been a core technology in computer vision, and its importance has been increasing rapidly. Because this technology is utilized for battery-operated products, energy consumption must be minimized. This paper describes a method of adaptive frame-rate optimization to satisfy that requirement. An energy trade-off occurs between image capturing and object tracking. Therefore, the method optimizes the frame-rate based on always changed object speed for minimizing the total energy while taking into account the trade-off. Simulation results show a maximum energy reduction of 50.0%, and an average reduction of 35.9% without serious tracking accuracy degradation.
Chao WU Yuan'an LIU Fan WU Suyan LIU
The energy efficiency of Internet of Things (IoT) could be improved by RF energy transfer technologies.Aiming at IoT applications with a mobility-constrained mobile sink, a double-sourced energy transfer (D-ET) scheme is proposed. Based on the hierarchical routing information of network nodes, the Simultaneous Wireless Information and Power Transfer (SWIPT) method helps to improve the global data gathering performance. A genetic algorithm and graph theory are combined to analyze the node energy consumption distribution. Then dedicated charger nodes are deployed on the basis of the genetic algorithm's output. Experiments are conducted using Network Simulator-3 (NS-3) to evaluate the performance of the D-ET scheme. The simulation results show D-ET outperforms other schemes in terms of network lifetime and data gathering performance.
Hang ZHOU Qing LI Hai ZHU Jian WANG
Large-scale virtualized data centers are increasingly becoming the norm in our data-intensive society. One pressing challenge is to reduce the energy consumption of servers while maintaining a high level of service agreement fulfillment. Due to the convenience of virtualization, virtual machine migration is an effective way to optimize the trade-off between energy and performance. However, there are obvious drawbacks in the current static threshold strategy for migration. This paper proposes a new decision strategy based on decision-theoretic rough sets. In the new strategy, the status of a server is determined by the Bayesian rough set model. The space is divided into positive, negative and boundary regions. According to this information, a migration decision with minimum risk will be made. This three-way decision framework in our strategy can reduce over-migration and delayed migration. The experiments in this paper show that this new strategy outperforms the benchmark examined. It is an efficient and flexible approach to the energy and performance trade-off in the cloud.
Yo YAMAGUCHI Yosuke FUJINO Hajime KATSUDA Marina NAKANO Hiroyuki FUKUMOTO Shigeru TERUHI Kazunori AKABANE Shuichi YOSHINO
This paper presents a water leakage monitoring system that gathers acoustic data of water pipes using wireless communication technology and identifies the sound of water leakage using machine leaning technology. To collect acoustic data effectively, this system combines three types of data-collection methods: drive-by, walk-by, and static. To design this system, it is important to ascertain the wireless communication distance that can be achieved with sensors installed in a basement. This paper also reports on radio propagation from underground manholes made from reinforced concrete and resin concrete in residential and commercial areas using the 920 MHz band. We reveal that it is possible to design a practical system that uses radio communication from underground sensors.
Satoshi IMAMURA Yuichiro YASUI Koji INOUE Takatsugu ONO Hiroshi SASAKI Katsuki FUJISAWA
The power consumption of server platforms has been increasing as the amount of hardware resources equipped on them is increased. Especially, the capacity of DRAM continues to grow, and it is not rare that DRAM consumes higher power than processors on modern servers. Therefore, a reduction in the DRAM energy consumption is a critical challenge to reduce the system-level energy consumption. Although it is well known that improving row buffer locality(RBL) and bank-level parallelism (BLP) is effective to reduce the DRAM energy consumption, our preliminary evaluation on a real server demonstrates that RBL is generally low across 15 multithreaded benchmarks. In this paper, we investigate the memory access patterns of these benchmarks using a simulator and observe that cache line-grained channel interleaving schemes, which are widely applied to modern servers including multiple memory channels, hurt the RBL each of the benchmarks potentially possesses. In order to address this problem, we focus on a row-grained channel interleaving scheme and compare it with three cache line-grained schemes. Our evaluation shows that it reduces the DRAM energy consumption by 16.7%, 12.3%, and 5.5% on average (up to 34.7%, 28.2%, and 12.0%) compared to the other schemes, respectively.
Ying SONG Xia ZHAO Bo WANG Yuzhong SUN
High energy cost is a big challenge faced by the current data centers, wherein computing energy and cooling energy are main contributors to such cost. Consolidating workload onto fewer servers decreases the computing energy. However, it may result in thermal hotspots which typically consume greater cooling energy. Thus the tradeoff between computing energy decreasing and cooling energy decreasing is necessary for energy saving. In this paper, we propose a minimized-total-energy virtual machine (VM for short) migration model called C2vmMap based on efficient tradeoff between computing and cooling energies, with respect to two relationships: one for between the resource utilization and computing power and the other for among the resource utilization, the inlet and outlet temperatures of servers, and the cooling power. Regarding online resolution of the above model for better scalability, we propose a VM migration algorithm called C2vmMap_heur to decrease the total energy of a data center at run-time. We evaluate C2vmMap_heur under various workload scenarios. The real server experimental results show that C2vmMap_heur reduces up to 40.43% energy compared with the non-migration load balance algorithm. This algorithm saves up to 3x energy compared with the existing VM migration algorithm.
Zi-fu FAN Qu CHENG Zheng-qiang WANG Xian-hui MENG Xiao-yu WAN
In this letter, we study the resource allocation for the downlink cooperative non-orthogonal multiple access (NOMA) systems based on the amplifying-and-forward protocol relay transmission. A joint power allocation and amplification gain selection scheme are proposed. Fractional programming and the iterative algorithm based on the Lagrangian multiplier are used to allocate the transmit power to maximize the energy efficiency (EE) of the systems. Simulation results show that the proposed scheme can achieve higher energy efficiency compared with the minimum power transmission (MPT-NOMA) scheme and the conventional OMA scheme.
Yue TAN Wei LIU Zhenyu YANG Xiaoni DU Zongtian LIU
Event-centered information integration is regarded as one of the most pressing issues in improving disaster emergency management. Ontology plays an increasingly important role in emergency information integration, and provides the possibility for emergency reasoning. However, the development of event ontology for disaster emergency is a laborious and difficult task due to the increasingly scale and complexity of emergencies. Ontology pattern is a modeling solution to solve the recurrent ontology design problem, which can improve the efficiency of ontology development by reusing patterns. By study on characteristics of numerous emergencies, this paper proposes a generic ontology pattern for emergency system modeling. Based on the emergency ontology pattern, a set of reasoning rules for emergency-evolution, emergency-solution and emergency-resource utilization reasoning were proposed to conduct emergency knowledge reasoning and q.
Hideaki NANBA Yukihito IKAMI Kenichiro IMAI Kenji KOBAYASHI Manabu SAWADA
When the automated driving cars are in widespread usage, traffic will coexist with prioritized vehicles (e.g., ambulances, fire trucks, police vehicles) and automated driving cars. Automated driving cars are expected to be safer and lower stress than manual driving vehicles because of passengers paying less attention to driving. However, there are many challenges for automated driving cars to get along with surrounding transport participants. In particular, when an ambulance is driving into an intersection with the red traffic signal, the automated driving car is required to deal with a situation differently from normal traffic situations. In order to continue safe driving, it is necessary to recognize the approach of the ambulance at an earlier time. Possible means of recognizing ambulances include siren sound, rotating red lights and vehicle to vehicle communication. Based on actual traffic data, the authors created a mathematical model of deceleration for giving way and consider the status of suitable behavior by automated driving cars. The authors calculate the detection distance required to take suitable action. The results indicate that there are advantages in vehicle to vehicle communication in detecting ambulances by automated driving cars.
Hiroki MANIWA Takayuki OKI Akira SUZUKI Kei UCHIZAWA Xiao ZHOU
The energy of a threshold circuit C is defined to be the maximum number of gates outputting ones for an input assignment, where the maximum is taken over all the input assignments. In this paper, we study computational power of threshold circuits of energy at most two. We present several results showing that the computational power of threshold circuits of energy one and the counterpart of energy two are remarkably different. In particular, we give an explicit function which requires an exponential size for threshold circuits of energy one, but is computable by a threshold circuit of size just two and energy two. We also consider MOD functions and Generalized Inner Product functions, and show that these functions also require exponential size for threshold circuits of energy one, but are computable by threshold circuits of substantially less size and energy two.
Shoko KIMURA Yoshihiko SUSUKI Atsushi ISHIGAME
We address a BEMS (Building Energy Management System) to guarantee reliability of electric-power supply in dynamic uncertain environments. The building microgrid as the target of BEMS has multiple distributed power sources including a photo-voltaic power system and Electric-Vehicle (EV). EV is regarded as an autonomously-moving battery due to the original means of transportation and is hence a cause of dynamic uncertainty of the building microgrid. The main objective of synthesis of BEMS in this paper is to guarantee the continuous supply of power to the most critical load in a building microgrid and to realize the power supply to the other loads according to a ranking of load importance. We synthesize the BEMS as a reactive control system that monitors changes of dynamic uncertain environment of the microgrid including departure and arrival of an EV, and determines a route of power supply to the most critical load. Also, we conduct numerical experiments of the reactive BEMS using models of power flows in the building and of charging states of the batteries. The experiments are incorporated with data measured in a practical office building and demonstration project of EMS at Osaka, Japan. We show that the BEMS works for extending the time duration of continuous power supply to the most critical load.
Xuanxuan TANG Wendong YANG Yueming CAI Weiwei YANG Yuyang ZHANG Xiaoli SUN Yufeng QIAN
This paper studies the secrecy throughput performance of the three-node wireless-powered networks and proposes two secure transmission schemes, namely the half-duplex maximal ratio combining (HD&MRC) scheme and the full-duplex jamming scheme based on time switching simultaneous wireless information and power transfer (FDJ&TS-SWIPT). The closed-form expressions of the secrecy throughput are derived, and intuitive comparison of the two schemes is provided. It is illustrated that the HD&MRC scheme only applies to the low and medium signal-to-noise ratio (SNR) regime. On the contrary, the suitable SNR regime of the FDJ&TS-SWIPT is much wider. It is depicted that FDJ&TS-SWIPT combing with current passive self-interference cancellation (SIC) algorithm outperforms HD&MRC significantly, especially when a medium or high transmit SNR is provided. Numerical simulations are conducted for verifying the validity of the analysis.
Kenji KANAI Sakiko TAKENAKA Jiro KATTO Tutomu MURASE
Because mobile users demand a high quality and energy-friendly video delivery service that efficiently uses wireless resources, we introduce an energy-efficient video delivery system by applying moving route navigation and playout buffer control based on the mobile throughput history data. The proposed system first determines the optimal travel route to achieve high-speed and energy-efficient communications. Then when a user enters a high throughput area, our system temporarily extends the video playout buffer size, and the user aggressively downloads video segments via a high-speed and energy-efficient wireless connection until the extended buffer is filled. After leaving this area, the user consumes video segments from the extended buffer in order to keep smooth video playback without wireless communications. We carry out computer simulations, laboratory and field experiments and confirm that the proposed system can achieve energy-efficient mobile video delivery.
Yewang QIAN Tingting ZHANG Haiyang ZHANG
In this letter, we consider a multiple-input multiple-output (MIMO) simultaneous wireless information and power transfer (SWIPT) system, in which the confidential message intended for the information receiver (IR) should be kept secret from the energy receiver (ER). Our goal is to design the optimal transmit covariance matrix so as to maximize the secrecy energy efficiency (SEE) of the system while guaranteeing the secrecy rate, energy harvesting and transmit power constraints. To deal with the original non-convex optimization problem, we propose an alternating optimization (AO)- based algorithm and also prove its convergence. Simulation results show that the proposed algorithm outperforms conventional design methods in terms of SEE.
Ryota ISHIKAWA Masashi TAWADA Masao YANAGISAWA Nozomu TOGAWA
Recently, stochastic computing based on stochastic numbers attracts attention as an effective computation method, which realizes arithmetic operations by simple logic circuits with a tolerance of bit errors. When we input two or more identical values to a stochastic circuit, we require to duplicate a stochastic number. However, if bit streams of duplicated stochastic numbers are dependent on each other, their arithmetic operation results can be inaccurate. In this paper, we propose two stochastic number duplicators, called FSR and RRR. The stochastic numbers duplicated by the FSR and RRR duplicators have the equivalent values but have independent bit streams, effectively utilizing bit re-arrangement using randomized bit streams. Experimental evaluation results demonstrate that the RRR duplicator, in particular, obtains more accurate results even if a circuit has re-convergence paths, reducing the mean square errors by 20%-89% compared to a conventional stochastic number duplicator.
Shanming ZHANG Takehiro SATO Satoru OKAMOTO Naoaki YAMANAKA
The energy consumption of network virtualization environments (NVEs) has become a critical issue. In this paper, we focus on reducing the data switching energy consumption of NVE. We first analyze the data switching energy of NVE. Then, we propose a dynamic energy efficient virtual link resource reallocation (eEVLRR) approach for NVE. eEVLRR dynamically reallocates the energy efficient substrate resources (s-resources) for virtual links with dynamic changes of embeddable s-resources to save the data switching energy. In order to avoid traffic interruptions while reallocating, we design a cross layer application-session-based forwarding model for eEVLRR that can identify and forward each data transmission flow along the initial specified substrate data transport path until end without traffic interruptions. The results of performance evaluations show that eEVLRR not only guarantees the allocated s-resources of virtual links are continuously energy efficient to save data switching energy but also has positive impacts on virtual network acceptance rate, revenues and s-resources utilization.
Yaohui CHANG Chunhua GU Fei LUO Guisheng FAN Wenhao FU
Virtual Machine Placement (VMP) plays an important role in ensuring efficient resource provisioning of physical machines (PMs) and energy efficiency in Infrastructure as a Service (IaaS) data centers. Efficient server consolidation assisted by virtual machine (VM) migration can promote the utilization level of the servers and switch the idle PMs to sleep mode to save energy. The trade-off between energy and performance is difficult, because consolidation may cause performance degradation, even service level agreement (SLA) violations. A novel residual available capacity (RAC) resource model is proposed to resolve the VM selection and allocation problem from the cloud service provider (CSP) perspective. Furthermore, a novel heuristic VM selection policy for server consolidation, named Minimized Square Root available Resource (MISR) is proposed. Meanwhile, an efficient VM allocation policy, named Balanced Selection (BS) based on RAC is proposed. The effectiveness validation of the BS-MISR combination is conducted on CloudSim with real workloads from the CoMon project. Evaluation results of experiments show that the proposed combinationBS-MISR can significantly reduce the energy consumption, with an average of 36.35% compared to the Local Regression and Minimum Migration Time (LR-MMT) combination policy. Moreover, the BS-MISR ensures a reasonable level of SLAs compared to the benchmarks.