An enzymatic biofuel cell (EBFC) is a device that uses an enzyme as a catalyst to convert chemical energy into electrical energy by a redox reaction to generate electricity. EBFC has the advantage that it can operate under mild conditions (normal temperature, normal pressure, and near neutral pH) and can use various energy sources such as sugar and alcohol. Hoshi et al. reported EBFC of glucose fuel using graphene-coated carbon fiber cloth (GCFC) with a large specific surface area. However, it was considered that GOD was affected by dissolved oxygen in the fuel and generated hydrogen peroxide, which hindered the reaction. In order to further increase the output, it was necessary to improve the performance of the anode with a novel enzyme that is less affected by oxygen and generates electricity from glucose. Therefore, we focused on FAD glucose dehydrogenase (FAD-GDH). It can generate electricity with glucose fuel by using it as a catalyst like GOD. Characteristic is that it is resistant to impurities such as maltose and galactose and is not easily affected by oxygen. It was thought that this would alleviate the concern about hydrogen peroxide and improve the output.

We propose a framework for the integration of heterogeneous networks in human pose estimation (HPE) with the aim of balancing accuracy and computational complexity. Although many existing methods can improve the accuracy of HPE using multiple frames in videos, they also increase the computational complexity. The key difference here is that the proposed heterogeneous framework has various networks for different types of frames, while existing methods use the same networks for all frames. In particular, we propose to divide the video frames into two types, including key frames and non-key frames, and adopt three networks including slow networks, fast networks, and transfer networks in our heterogeneous framework. For key frames, a slow network is used that has high accuracy but high computational complexity. For non-key frames that follow a key frame, we propose to warp the heatmap of a slow network from a key frame via a transfer network and fuse it with a fast network that has low accuracy but low computational complexity. Furthermore, when extending to the usage of long-term frames where a large number of non-key frames follow a key frame, the temporal correlation decreases. Therefore, when necessary, we use an additional transfer network that warps the heatmap from a neighboring non-key frame. The experimental results on PoseTrack 2017 and PoseTrack 2018 datasets demonstrate that the proposed FSPose achieves a better balance between accuracy and computational complexity than the competitor method. Our source code is available at https://github.com/Fenax79/fspose.

In a power network, it is important to detect a cyber attack. In this paper, we propose a method for detecting false data injection (FDI) attacks in distributed state estimation. An FDI attack is well known as one of the typical cyber attacks in a power network. As a method of FDI attack detection, we consider calculating the residual (i.e., the difference between the observed and estimated values). In the proposed detection method, the tentative residual (estimated error) in ADMM (Alternating Direction Method of Multipliers), which is one of the powerful methods in distributed optimization, is applied. First, the effect of an FDI attack is analyzed. Next, based on the analysis result, a detection parameter is introduced based on the residual. A detection method using this parameter is then proposed. Finally, the proposed method is demonstrated through a numerical example on the IEEE 14-bus system.

The problem caused by fake news continues to worsen in today's online social networks. Intuitively, it seems effective to issue corrections as a countermeasure. However, corrections can, ironically, strengthen attention to fake news, which worsens the situation. This paper proposes a model for describing the interaction between fake news and the corrections as a reaction-diffusion system; this yields the mechanism by which corrections increase attention to fake news. In this model, the emergence of groups of users who believe in fake news is understood as a Turing pattern that appears in the activator-inhibitor model. Numerical calculations show that even if the network structure has no spatial bias, the interaction between fake news and the corrections creates groups that are strongly interested in discussing fake news. Also, we propose and evaluate a basic strategy to counter fake news.

Reconfigurable intelligent surface (RIS) has the capability of boosting system performance by manipulating the wireless propagation environment. This paper investigates a downlink RIS-aided non-orthogonal multiple access (NOMA) system, where a RIS is deployed to enhance physical-layer security (PLS) in the presence of an eavesdropper. In order to improve the main link's security, the RIS is deployed between the source and the users, in which a reflecting element separation scheme is developed to aid data transmission of both the cell-center and the cell-edge users. Additionally, the closed-form expressions of secrecy outage probability (SOP) are derived for the proposed RIS-aided NOMA scheme. To obtain more deep insights on the derived results, the asymptotic performance of the derived SOP is analyzed. Moreover, the secrecy diversity order is derived according to the asymptotic approximation in the high signal-to-noise ratio (SNR) and main-to-eavesdropper ratio (MER) regime. Furthermore, based on the derived results, the power allocation coefficient and number of elements are optimized to minimize the system SOP. Simulations demonstrate that the theoretical results match well with the simulation results and the SOP of the proposed scheme is clearly less than that of the conventional orthogonal multiple access (OMA) scheme obviously.

Tool condition monitoring is one of the core tasks of intelligent manufacturing in digital workshop. This paper presents an intelligent recognize method of tool condition based on deep learning. First, the industrial microphone is used to collect the acoustic signal during machining; then, a central fractal decomposition algorithm is proposed to extract sensitive information; finally, the multi-scale convolutional recurrent neural network is used for deep feature extraction and pattern recognition. The multi-process milling experiments proved that the proposed method is superior to the existing methods, and the recognition accuracy reached 88%.

In the pork fat content detection task, traditional physical or chemical methods are strongly destructive, have substantial technical requirements and cannot achieve nondestructive detection without slaughtering. To solve these problems, we propose a novel, convenient and economical method for detecting the fat content of pig B-ultrasound images based on hybrid attention and multiscale fusion learning, which extracts and fuses shallow detail information and deep semantic information at multiple scales. First, a deep learning network is constructed to learn the salient features of fat images through a hybrid attention mechanism. Then, the information describing pork fat is extracted at multiple scales, and the detailed information expressed in the shallow layer and the semantic information expressed in the deep layer are fused later. Finally, a deep convolution network is used to predict the fat content compared with the real label. The experimental results show that the determination coefficient is greater than 0.95 on the 130 groups of pork B-ultrasound image data sets, which is 2.90, 6.10 and 5.13 percentage points higher than that of VGGNet, ResNet and DenseNet, respectively. It indicats that the model could effectively identify the B-ultrasound image of pigs and predict the fat content with high accuracy.

A frontal and realistic face image was synthesized from a single profile face image. It has a wide range of applications in face recognition. Although the frontal face method based on deep learning has made substantial progress in recent years, there is still no guarantee that the generated face has identity consistency and illumination consistency in a significant posture. This paper proposes a novel pixel-based feature regression generative adversarial network (PFR-GAN), which can learn to recover local high-frequency details and preserve identity and illumination frontal face images in an uncontrolled environment. We first propose a Reslu block to obtain richer feature representation and improve the convergence speed of training. We then introduce a feature conversion module to reduce the artifacts caused by face rotation discrepancy, enhance image generation quality, and preserve more high-frequency details of the profile image. We also construct a 30,000 face pose dataset to learn about various uncontrolled field environments. Our dataset includes ages of different races and wild backgrounds, allowing us to handle other datasets and obtain better results. Finally, we introduce a discriminator used for recovering the facial structure of the frontal face images. Quantitative and qualitative experimental results show our PFR-GAN can generate high-quality and high-fidelity frontal face images, and our results are better than the state-of-art results.

There are demands for high-speed and stable ground-to-train optical communication as a network environment for trains. The existing ground-to-train optical communication system developed by the authors uses a camera and a QPD (Quadrant photo diode) to capture beacon light. The problem with the existing system is that it is impossible to identify the ground station. In the system proposed in this paper, a beacon light modulated with the ID of the ground station is transmitted, and the ground station is identified by demodulating the image from the dual-port camera on the opposite side. In this paper, we developed an actual system and conducted experiments using a car on the road. The results showed that only one packet was lost with the ping command every 1 ms near handover. Although the communication device itself has a bandwidth of 100 Mbps, the throughput before and after the handover was about 94 Mbps, and only dropped to about 89.4 Mbps during the handover.

This letter proposes a novel lightweight deep learning object detector named LW-YOLOv4-tiny, which incorporates the convolution block feature addition module (CBFAM). The novelty of LW-YOLOv4-tiny is the use of channel-wise convolution and element-wise addition in the CBFAM instead of utilizing the concatenation of different feature maps. The model size and computation requirement are reduced by up to 16.9 Mbytes, 5.4 billion FLOPs (BFLOPS), and 11.3 FPS, which is 31.9%, 22.8%, and 30% smaller and faster than the most recent version of YOLOv4-tiny. From the MSCOCO2017 and PASCAL VOC2012 benchmarks, LW-YOLOv4-tiny achieved 40.2% and 69.3% mAP, respectively.

In mobile communication systems, the channel state information (CSI) is severely affected by the noise effect of the receiver. The adaptive subcarrier grouping (ASG) for sample matrix inversion (SMI) based minimum mean square error (MMSE) adaptive array has been previously proposed. Although it can reduce the additive noise effect by increasing samples to derive the array weight for co-channel interference suppression, it needs to know the signal-to-noise ratio (SNR) in advance to set the threshold for subcarrier grouping. This paper newly proposes adaptive zero padding (AZP) in the time domain to improve the weight accuracy of the SMI matrix. This method does not need to estimate the SNR in advance, and even if the threshold is always constant, it can adaptively identify the position of zero-padding to eliminate the noise interference of the received signal. Simulation results reveal that the proposed method can achieve superior bit error rate (BER) performance under various Rician K factors.

Variable strength orthogonal array, as a special form of variable strength covering array, plays an important role in computer software testing and cryptography. In this paper, we study the construction of variable strength orthogonal arrays with strength two containing strength greater than two by Galois field and construct some variable strength orthogonal arrays with strength l containing strength greater than l by Fan-construction.

Animating 3D characters using motion capture data requires basic expertise and manual labor. To support the creativity of animation design and make it easier for common users, we present a sketch-based interface DualMotion, with rough sketches as input for designing daily-life animations of characters, such as walking and jumping. Our approach enables to combine global motions of lower limbs and the local motion of the upper limbs in a database by utilizing a two-stage design strategy. Users are allowed to design a motion by starting with drawing a rough trajectory of a body/lower limb movement in the global design stage. The upper limb motions are then designed by drawing several more relative motion trajectories in the local design stage. We conduct a user study and verify the effectiveness and convenience of the proposed system in creative activities.

The MinRank problem is investigated as a problem related to rank attacks in multivariate cryptography and the decoding of rank codes in coding theory. The Kipnis-Shamir method is one of the methods to solve the problem, and recently, significant progress has been made in its complexity estimation by Verbel et al. As this method reduces the problem to an MQ problem, which asks for a solution to a system of quadratic equations, its complexity depends on the solving degree of a quadratic system deduced from the method. A theoretical value introduced by Verbel et al. approximates the minimal solving degree of the quadratic systems in the method although their value is defined under a certain limit for the system considered. A quadratic system outside their limitation often has a larger solving degree, but the solving complexity is not always higher because it has a smaller number of variables and equations. Thus, in order to discuss the best complexity of the Kipnis-Shamir method, a theoretical value is needed to approximate the solving degree of each quadratic system deduced from the method. A quadratic system deduced from the Kipnis-Shamir method always has a multi-degree, and the solving complexity is influenced by this property. In this study, we introduce a theoretical value defined by such a multi-degree and show that it approximates the solving degree of each quadratic system. Thus, the systems deduced from the method are compared, and the best complexity is discussed. As an application, for the MinRank attack using the Kipnis-Shamir method against the multivariate signature scheme Rainbow, we show a case in which a deduced quadratic system outside Verbel et al.'s limitation is the best. In particular, the complexity estimation of the MinRank attack using the KS method against the Rainbow parameter sets I, III and V is reduced by about 172, 140 and 212 bits, respectively, from Verbel et al.'s estimation.

Under the background of non-homogenous and dynamic time-varying clutter, the processing ability of the traditional constant false alarm rate (CFAR) detection algorithm is significantly reduced, as well as the detection performance. This paper proposes a CFAR detection algorithm based on clutter knowledge (CK-CFAR), as a new CFAR, to improve the detection performance adaptability of the radar in complex clutter background. With the acquired clutter prior knowledge, the algorithm can dynamically select parameters according to the change of background clutter and calculate the threshold. Compared with the detection algorithms such as CA-CFAR, GO-CFAR, SO-CFAR, and OS-CFAR, the simulation results show that CK-CFAR has excellent detection performance in the background of homogenous clutter and edge clutter. This algorithm can help radar adapt to the clutter with different distribution characteristics, effectively enhance radar detection in a complex environment. It is more in line with the development direction of the cognitive radar.

The reliability of deep neural networks (DNN) against hardware errors is essential as DNNs are increasingly employed in safety-critical applications such as automatic driving. Transient errors in memory, such as radiation-induced soft error, may propagate through the inference computation, resulting in unexpected output, which can adversely trigger catastrophic system failures. As a first step to tackle this problem, this paper proposes constructing a vulnerability model (VM) with a small number of fault injections to identify vulnerable model parameters in DNN. We reduce the number of bit locations for fault injection significantly and develop a flow to incrementally collect the training data, i.e., the fault injection results, for VM accuracy improvement. We enumerate key features (KF) that characterize the vulnerability of the parameters and use KF and the collected training data to construct VM. Experimental results show that VM can estimate vulnerabilities of all DNN model parameters only with 1/3490 computations compared with traditional fault injection-based vulnerability estimation.

The latest versatile video coding (VVC) introduces some novel techniques such as quadtree with nested multi-type tree (QTMT), multiple transform selection (MTS) and multiple reference line (MRL). These tools improve compression efficiency compared with the previous standard H.265/HEVC, but they suffer from very high computational complexity. One of the most time-consuming parts of VVC intra coding is the coding tree unit (CTU) structure decision. In this paper, we propose a low-complexity multi-type tree (MT) pruning method for VVC intra coding. This method consists of lookahead search and MT pruning. The lookahead search process is performed to derive the approximate rate-distortion (RD) cost of each MT node at depth 2 or 3. Subsequently, the improbable MT nodes are pruned by different strategies under different cost errors. These strategies are designed according to the priority of the node. Experimental results show that the overall proposed algorithm can achieve 47.15% time saving with only 0.93% Bjøntegaard delta bit rate (BDBR) increase over natural scene sequences, and 45.39% time saving with 1.55% BDBR increase over screen content sequences, compared with the VVC reference software VTM 10.0. Such results demonstrate that our method achieves a good trade-off between computational complexity and compression quality compared to recent methods.

This paper presents dual bands and dual polarization reflectarrays for 5G millimeter wave applications. The frequency bands of 28GHz and 39GHz are allocated for 5G to realize high speed data transmission. However, these high frequency bands create coverage holes in which no link between base station and receivers is possible. Reflectarray has gained attention for reducing the size and number of coverage holes. This paper proposes a unit cell with swastika and the patch structure to construct the dual bands reflectrray operating at 28GHz and 39GHz by supercell. This paper also presents the detailed design procedure of the dual-bands reflectarray by supercell. The reflectarray is experimentally validated by a bistatic radar cross section measurement system. The experimental results are compared with simulation and reflection angle agreement is observed.

In this paper, the spurious modes and quality-factor (Q) values of the one-port dual-mode AlN lamb-wave resonators at 500-1000 MHz were studied by theoretical analysis and experimental verification. Through finite element analysis, we found that optimizing the width of the lateral reflection boundary at both ends of the resonator to reach the quarter wavelength (λ/4), which can improve its spectral purity and shift its resonant frequency. The designed resonators were micro-fabricated by using lithography processes on a 6-inch wafer. The measured results show that the spurious mode can be converted and dissipated, splitting into several longitudinal modes by optimizing the width of the lateral reflection boundary, which are consistent well with the theoretical analysis. Similarly, optimizing the interdigital transducer (IDT) width and number of IDT fingers can also suppress the resonator's spurious modes. In addition, it is found that there is no significant difference in the Qs value for the two modes of the dual-mode resonator with the narrow anchor and full anchor. The acoustic wave leaked from the anchor into the substrate produces a small displacement, and the energy is limited in the resonator. Compared to the resonator with Au IDTs, the resonator with Al IDTs can achieve a higher Q value due to its lower thermo-elastic damping loss. The measured results show the optimized dual-mode lamb-wave resonator can obtain Qs value of 2946.3 and 2881.4 at 730.6 MHz and 859.5 MHz, Qp values of 632.5 and 1407.6, effective electromechanical coupling coefficient (k2eff) of 0.73% and 0.11% respectively, and has excellent spectral purity simultaneously.

Object detection is one of the most important aspects of computer vision, and the use of CNNs for object detection has yielded substantial results in a variety of fields. However, due to the fixed sampling in standard convolution layers, it restricts receptive fields to fixed locations and limits CNNs in geometric transformations. This leads to poor performance of CNNs for slender object detection. In order to achieve better slender object detection accuracy and efficiency, this proposed detector DFAM-DETR not only can adjust the sampling points adaptively, but also enhance the ability to focus on slender object features and extract essential information from global to local on the image through an attention mechanism. This study uses slender objects images from MS-COCO dataset. The experimental results show that DFAM-DETR achieves excellent detection performance on slender objects compared to CNN and transformer-based detectors.