This paper proposes a measurement-based spectrum database (MSD) with clustered fading distributions toward greater storage efficiencies. The conventional MSD can accurately model the actual characteristics of multipath fading by plotting the histogram of instantaneous measurement data for each space-separated mesh and utilizing it in communication designs. However, if the database contains all of a distribution for each location, the amount of data stored will be extremely large. Because the main purpose of the MSD is to improve spectral efficiency, it is necessary to reduce the amount of data stored while maintaining quality. The proposed method reduces the amount of stored data by estimating the distribution of the instantaneous received signal power at each point and integrating similar distributions through clustering. Numerical results show that clustering techniques can reduce the amount of data while maintaining the accuracy of the MSD. We then apply the proposed method to the outage probability prediction for the instantaneous received signal power. It is revealed that the prediction accuracy is maintained even when the amount of data is reduced.

Face sketch synthesis refers to transform facial photos into sketches. Recent research on face sketch synthesis has achieved great success due to the development of Generative Adversarial Networks (GAN). However, these generative methods prone to neglect detailed information and thus lose some individual specific features, such as glasses and headdresses. In this paper, we propose a novel method called Feature Learning Generative Adversarial Network (FL-GAN) to synthesize detail-preserving high-quality sketches. Precisely, the proposed FL-GAN consists of one Feature Learning (FL) module and one Adversarial Learning (AL) module. The FL module aims to learn the detailed information of the image in a latent space, and guide the AL module to synthesize detail-preserving sketch. The AL Module aims to learn the structure and texture of sketch and improve the quality of synthetic sketch by adversarial learning strategy. Quantitative and qualitative comparisons with seven state-of-the-art methods such as the LLE, the MRF, the MWF, the RSLCR, the RL, the FCN and the GAN on four facial sketch datasets demonstrate the superiority of this method.

Sketch face recognition refers to matching photos with sketches, which has effectively been used in various applications ranging from law enforcement agencies to digital entertainment. However, due to the large modality gap between photos and sketches, sketch face recognition remains a challenging task at present. To reduce the domain gap between the sketches and photos, this paper proposes a cascaded transformation generation network for cross-modality image generation and sketch face recognition simultaneously. The proposed cascaded transformation generation network is composed of a generation module, a cascaded feature transformation module, and a classifier module. The generation module aims to generate a high quality cross-modality image, the cascaded feature transformation module extracts high-level semantic features for generation and recognition simultaneously, the classifier module is used to complete sketch face recognition. The proposed transformation generation network is trained in an end-to-end manner, it strengthens the recognition accuracy by the generated images. The recognition performance is verified on the UoM-SGFSv2, e-PRIP, and CUFSF datasets; experimental results show that the proposed method is better than other state-of-the-art methods.

Tourist satisfaction plays a very important role in the development of local community tourism. For the development of tourist destinations in local communities, it is important to measure, maintain, and improve tourist destination royalties over the medium to long term. It has been proven that improving tourist satisfaction is a major factor in improving tourist destination royalties. Therefore, to improve tourist satisfaction in local communities, we identified multiple clusters of sightseeing spots and determined that the satisfaction of tourists can be increased based on these clusters of sightseeing spots. Our discovery flow can be summarized as follows. First, we extracted tourism keywords from guidebooks on sightseeing spots. We then constructed a complex network of tourists and sightseeing spots based on the data collected from experiments conducted in Kyoto. Next, we added the corresponding tourism keywords to each sightseeing spot. Finally, by analyzing network motifs, we successfully discovered multiple clusters of sightseeing spots that could be used to improve tourist satisfaction.

In this paper, the uplink performance of Multi-User Multiple Input Multiple Output (MU-MIMO) Zero Forcing (ZF) receiver is investigated over correlated Rayleigh fading channels with channel estimation error. A mathematical expression for the sub-streams' output Signal to Noise Ratio (SNR) with transmit and receive-correlation is derived in the presence of erroneous channel estimates. Besides, an approximate and accurate expression for the Bit Error Rate (BER) of ZF receiver for 16-Quadrature Amplitude Modulation (QAM) with transmit-correlation is deduced in terms of the hypergeometric function. Subsequently, the developed analytical BER is verified by Monte-Carlo trails accounting various system parameters. The simulation results indicate that ZF receiver's BER relies solely on the transmit-correlation for the same number of transmit and receive-antennas at higher average SNR values per transmitted symbol (Es/N0). Also, a logarithmic and exponential growth in the BER is observed with an increase in the Mean Square estimation Error (MSE) and correlation coefficient, respectively.

Code smells can be detected using tools such as a static analyzer that detects code smells based on source code metrics. Developers perform refactoring activities based on the result of such detection tools to improve source code quality. However, such an approach can be considered as reactive refactoring, i.e., developers react to code smells after they occur. This means that developers first suffer the effects of low-quality source code before they start solving code smells. In this study, we focus on proactive refactoring, i.e., refactoring source code before it becomes smelly. This approach would allow developers to maintain source code quality without having to suffer the impact of code smells. To support the proactive refactoring process, we propose a technique to detect decaying modules, which are non-smelly modules that are about to become smelly. We present empirical studies on open source projects with the aim of studying the characteristics of decaying modules. Additionally, to facilitate developers in the refactoring planning process, we perform a study on using a machine learning technique to predict decaying modules and report a factor that contributes most to the performance of the model under consideration.

Observations of gravity waves based on High Frequency Surface Wave Radar can make contributions to a better understanding of the energy transfer process between the ocean and the ionosphere. In this paper, through processing the observed data of the ionospheric clutter from HFSWR during the period of the Typhoon Rumbia with short-time Fourier transform method, HFSWR was proven to have the capability of gravity wave detection.

In this letter, we present a construction of bent functions which generalizes a work of Zhang et al. in 2016. Based on that, we obtain a cubic bent function in 10 variables and prove that, it has no affine derivative and does not belong to the completed Maiorana-McFarland class, which is opposite to all 6/8-variable cubic bent functions as they are inside the completed Maiorana-McFarland class. This is the first time a theoretical proof is given to show that the cubic bent functions in 10 variables can be outside the completed Maiorana-McFarland class. Before that, only a sporadic example with such properties was known by computer search. We also show that our function is EA-inequivalent to that sporadic one.

In the 5th generation mobile communication system (5G), super high frequency (SHF) bands such as 28GHz will be used in many scenarios. In Japan, a local 5G working group has been established to apply advanced 5G technologies to private networks and is working to encourage local companies and municipalities to introduce new services for local needs. Meanwhile, the smaller size of the 28GHz band cells creates the difficulties when establishing deployment areas for homogeneous networks. In general, heterogeneous network approach with the combination of macro-cell and micro-cell have been considered practical and applied by the giant telecommunication operators. However, private network operators have difficulty in deploying both micro- and macro-cells due to the cost issue. Without the assistance of macro-cells, local spot cells with a small service area may not be able to start services while high-speed mobile users are staying in the service area. In this paper, we propose a virtual pre-connection scheme allowing fast connection to local spot cells without the assistance of macro-cells. In addition, we confirm that the proposed scheme can reduce the cell search time required when entering a local spot cell from 100 seconds or more to less than 1 second, and can reduce the loss of connection opportunities to local spot cells for high-speed mobile users.

The previous communication-induced checkpointing may considerably induce worthless forced checkpoints because each process receiving messages cannot obtain sufficient information related to non-causal Z-paths. This paper presents an enhanced sender-based message logging protocol applicable to any communication-induced checkpointing to lead to a high decrease of the forced checkpointing overhead of communication-induced checkpointing in an effective way while permitting no useless checkpoint. The protocol allows each process sending a message to know the exact timestamp of the receiver of the message in its logging procedures without any extra message. Simulation verifies their great efficiency of overhead alleviation regardless of communication patterns.

Given a set P of n points on which facilities can be placed and an integer k, we want to place k facilities on some points so that the minimum distance between facilities is maximized. The problem is called the k-dispersion problem. In this paper, we consider the 3-dispersion problem when P is a set of points on a plane (2-dimensional space). Note that the 2-dispersion problem corresponds to the diameter problem. We give an O(n) time algorithm to solve the 3-dispersion problem in the L∞ metric, and an O(n) time algorithm to solve the 3-dispersion problem in the L1 metric. Also, we give an O(n2 log n) time algorithm to solve the 3-dispersion problem in the L2 metric.

This paper proposes time division multiplexing (TDM) based reference signal (RS) multiplexing for faster-than-Nyquist (FTN) signaling using orthogonal frequency division multiplexing (OFDM). We also propose a subframe structure in which a cyclic prefix (CP) is appended to only the TDM based RS block and the first FTN symbol to achieve accurate estimation of the channel response in a multipath fading channel with low CP overhead. Computer simulation results show that the loss in the required average received SNR satisfying the average block error rate (BLER) of 10-2 using the proposed TDM based RS multiplexing from that with ideal channel estimation is suppressed to within approximately 1.2dB and 1.7dB for QPSK and 16QAM, respectively. This is compared to when the improvement ratio of the spectral efficiency from CP-OFDM is 1.31 with the rate-1/2 turbo code. We conclude that the TDM based RS multiplexing with the associated CP multiplexing is effective in achieving accurate channel estimation for FTN signaling using OFDM.

Exploring the structural information as prior to facial images is a key issue of face super-resolution (SR). Although deep convolutional neural networks (CNNs) own powerful representation ability, how to accurately use facial structural information remains challenges. In this paper, we proposed a new residual fusion network to utilize the multi-scale structural information for face SR. Different from the existing methods of increasing network depth, the bottleneck attention module is introduced to extract fine facial structural features by exploring correlation from feature maps. Finally, hierarchical scales of structural information is fused for generating a high-resolution (HR) facial image. Experimental results show the proposed network outperforms some existing state-of-the-art CNNs based face SR algorithms.

We developed a Nb 4-layer process for fabricating superconducting integrated circuits that involves using caldera planarization to increase the flexibility and reliability of the fabrication process. We call this process the planarized high-speed standard process (PHSTP). Planarization enables us to flexibly adjust most of the Nb and SiO2 film thicknesses; we can select reduced film thicknesses to obtain larger mutual coupling depending on the application. It also reduces the risk of intra-layer shorts due to etching residues at the step-edge regions. We describe the detailed process flows of the planarization for the Josephson junction layer and the evaluation of devices fabricated with PHSTP. The results indicated no short defects or degradation in junction characteristics and good agreement between designed and measured inductances and resistances. We also developed single-flux-quantum (SFQ) and adiabatic quantum-flux-parametron (AQFP) logic cell libraries and tested circuits fabricated with PHSTP. We found that the designed circuits operated correctly. The SFQ shift-registers fabricated using PHSTP showed a high yield. Numerical simulation results indicate that the AQFP gates with increased mutual coupling by the planarized layer structure increase the maximum interconnect length between gates.

This review provides a current overview of the fabrication processes for superconducting digital circuits at CRAVITY (clean room for analog and digital superconductivity) at the National Institute of Advanced Industrial Science and Technology (AIST), Japan. CRAVITY routinely fabricates superconducting digital circuits using three types of fabrication processes and supplies several thousand chips to its collaborators each year. Researchers at CRAVITY have focused on improving the controllability and uniformity of device parameters and the reliability, which means reducing defects. These three aspects are important for the correct operation of large-scale digital circuits. The current technologies used at CRAVITY permit ±10% controllability over the critical current density (Jc) of Josephson junctions (JJs) with respect to the design values, while the critical current (Ic) uniformity is within 1σ=2% for JJs with areas exceeding 1.0 µm2 and the defect density is on the order of one defect for every 100,000 JJs.

In this letter, we investigate tight analytical and asymptotic upper bounds for bit error rate (BER) of constitutional codes over exponentially correlated Nakagami-m fading channels. Specifically, we derive the BER expression depending on an exact closed-form formula for pairwise error event probabilities (PEEP). Moreover, the corresponding asymptotic analysis in high signal-to-noise ratio (SNR) regime is also explored, which is verified via numerical results. This allows us to have explicit insights on the achievable coding gain and diversity order.

This paper presents a distributed server allocation model with preventive start-time optimization against a single server failure. The presented model preventively determines the assignment of servers to users under each failure pattern to minimize the largest maximum delay among all failure patterns. We formulate the proposed model as an integer linear programming (ILP) problem. We prove the NP-completeness of the considered problem. As the number of users and that of servers increase, the size of ILP problem increases; the computation time to solve the ILP problem becomes excessively large. We develop a heuristic approach that applies simulated annealing and the ILP approach in a hybrid manner to obtain the solution. Numerical results reveal that the developed heuristic approach reduces the computation time by 26% compared to the ILP approach while increasing the largest maximum delay by just 3.4% in average. It reduces the largest maximum delay compared with the start-time optimization model; it avoids the instability caused by the unnecessary disconnection permitted by the run-time optimization model.

As scientific and technological resources are experiencing information overload, it is quite expensive to find resources that users are interested in exactly. The personalized recommendation system is a good candidate to solve this problem, but data sparseness and the cold starting problem still prevent the application of the recommendation system. Sparse data affects the quality of the similarity measurement and consequently the quality of the recommender system. In this paper, we propose a matrix factorization recommendation algorithm based on similarity calculation(SCMF), which introduces potential similarity relationships to solve the problem of data sparseness. A penalty factor is adopted in the latent item similarity matrix calculation to capture more real relationships furthermore. We compared our approach with other 6 recommendation algorithms and conducted experiments on 5 public data sets. According to the experimental results, the recommendation precision can improve by 2% to 9% versus the traditional best algorithm. As for sparse data sets, the prediction accuracy can also improve by 0.17% to 18%. Besides, our approach was applied to patent resource exploitation provided by the wanfang patents retrieval system. Experimental results show that our method performs better than commonly used algorithms, especially under the cold starting condition.

Binary bent functions have a strictly specified number of non-zero values. In the same way, ternary bent functions satisfy certain requirements on the elements of their value vectors. These requirements can be used to specify six classes of ternary bent functions. Classes are mutually related by encoding of function values. Given a basic ternary bent function, other functions in the same class can be constructed by permutation matrices having a block structure similar to that of the factor matrices appearing in the Good-Thomas decomposition of Cooley-Tukey Fast Fourier transform and related algorithms.

With the development of the IEEE 802.11 standard for wireless LANs, there has been an enormous increase in the usage of wireless LANs in factories, plants, and other industrial environments. In industrial applications, wireless LAN systems require high reliability for stable real-time communications. In this paper, we propose a multi-access-point (AP) diversity method that contributes to the realization of robust data transmissions toward realization of ultra-reliable low-latency communications (URLLC) in wireless LANs. The proposed method can obtain a diversity effect of multipaths with independent transmission errors and collisions without modification of the IEEE 802.11 standard or increasing overhead of communication resources. We evaluate the effects of the proposed method by numerical analysis, develop a prototype to demonstrate its feasibility, and perform experiments using the prototype in a factory wireless environment. These numerical evaluations and experiments show that the proposed method increases reliability and decreases transmission delay.