This paper presents a conformal retrodirective metagrating with multi-azimuthal-angle operating ability. First, a flat metagrating composed of a periodic array of single rectangular patch elements, two-layer stacked substrates, and a ground plane is implemented to achieve one-directional retroreflection at a specific angle. The elevation angle of the retroreflection is manipulated by precisely tuning the value of the period. To control the energy coupling to the retrodirective mode, the dimensions of the length and width of the rectangular patch are investigated under the effect of changing the substrate thickness. Three values of the length, width, and thickness are then chosen to obtain a high retroreflection power efficiency. Next, to create a conformal design operating simultaneously at multiple azimuthal angles, the rectangular patch array using a flexible ultra-thin guiding layer is conformed to a dielectric cylindrical substrate backed by a perfect electric conductor ground plane. Furthermore, to further optimize the retroreflection efficiency, two circular metallic plates are added at the two ends of the cylindrical substrate to eliminate the specular reflection inside the space of the cylinder. The measured radar cross-section shows a power efficiency of the retrodirective metagrating of approximately 91% and 93% for 30° retrodirected elevation angle at the azimuthal angles of 0° and 90°, respectively, at 5.8GHz.
A fully homomorphic encryption (FHE) would be the important cryptosystem as the basic scheme for the cloud computing. Since Gentry discovered in 2009 the first fully homomorphic encryption scheme, some fully homomorphic encryption schemes were proposed. In the systems proposed until now the bootstrapping process is the main bottleneck and the large complexity for computing the ciphertext is required. In 2011 Zvika Brakerski et al. proposed a leveled FHE without bootstrapping. But circuit of arbitrary level cannot be evaluated in their scheme while in our scheme circuit of any level can be evaluated. The existence of an efficient fully homomorphic cryptosystem would have great practical implications in the outsourcing of private computations, for instance, in the field of the cloud computing. In this paper, IND-CCA1secure FHE based on the difficulty of prime factorization is proposed which does not need the bootstrapping and it is thought that our scheme is more efficient than the previous schemes. In particular the computational overhead for homomorphic evaluation is O(1).
Noboru BABAGUCHI Isao ECHIZEN Junichi YAMAGISHI Naoko NITTA Yuta NAKASHIMA Kazuaki NAKAMURA Kazuhiro KONO Fuming FANG Seiko MYOJIN Zhenzhong KUANG Huy H. NGUYEN Ngoc-Dung T. TIEU
Fake media has been spreading due to remarkable advances in media processing and machine leaning technologies, causing serious problems in society. We are conducting a research project called Media Clone aimed at developing methods for protecting people from fake but skillfully fabricated replicas of real media called media clones. Such media can be created from fake information about a specific person. Our goal is to develop a trusted communication system that can defend against attacks of media clones. This paper describes some research results of the Media Clone project, in particular, various methods for protecting personal information against generating fake information. We focus on 1) fake information generation in the physical world, 2) anonymization and abstraction in the cyber world, and 3) modeling of media clone attacks.
In high range resolution radar systems, the detection of range-spread target under correlated non-Gaussian clutter faces many problems. In this paper, a novel detector employing an autoregressive (AR) model is proposed to improve the detection performance. The algorithm is elaborately designed and analyzed considering the clutter characteristics. Numerical simulations and measurement data verify the effectiveness and advantages of the proposed detector for the range-spread target in spatially correlated non-Gaussian clutter.
Smart business management has been built to efficiently carry out enterprise business activities and improve its business outcomes in a global business circumstance. Firms have applied their smart business to their business activities in order to enhance the smart business results. The outcome of an enterprise's smart business fulfillment has to be managed and measured to effectively establish and control the smart business environment based on its business plan and business departments. In this circumstance, we need the measurement framework that can reasonably gauge a firm's smart business output in order to control and advance its smart business ability. This research presents a measurement instrument for an enterprise smart business performance in terms of a general smart business outcome. The developed measurement scale is verified on its validity and reliability through factor analysis and reliability analysis based on previous literature. This study presents an 11-item measurement tool that can reasonably gauge a firm smart business performance in both of finance and non-finance perspective.
Qingyuan LIU Qi ZHANG Xiangjun XIN Ran GAO Qinghua TIAN Feng TIAN
This paper investigates the resource allocation problem for the downlink of non-orthogonal multiple access (NOMA) networks. A novel resource allocation method is proposed to deal with the problem of maximizing the system capacity while taking into account user fairness. Since the optimization problem is nonconvex and intractable, we adopt the idea of step-by-step optimization, decomposing it into user pairing, subchannel and power allocation subproblems. First, all users are paired according to their different channel gains. Then, the subchannel allocation is executed by the proposed subchannel selection algorithm (SSA) based on channel priority. Once the subchannel allocation is fixed, to further improve the system capacity, the subchannel power allocation is implemented by the successive convex approximation (SCA) approach where the nonconvex optimization problem is transformed into the approximated convex optimization problem in each iteration. To ensure user fairness, the upper and lower bounds of the power allocation coefficients are derived and combined by introducing the tuning coefficients. The power allocation coefficients are dynamically adjustable by adjusting the tuning coefficients, thus the diversified quality of service (QoS) requirements can be satisfied. Finally, simulation results demonstrate the superiority of the proposed method over the existing methods in terms of system performance, furthermore, a good tradeoff between the system capacity and user fairness can be achieved.
Shigeru KOZONO Yuya TASHIRO Yuuki KANEMIYO Hiroaki NAKABAYASHI
In a multiple-user MIMO system in which numerous users simultaneously communicate in a cell, the channel matrix properties depend on the parameters of the individual users in such a way that they can be modeled as points randomly moving within the cell. Although these properties can be simulated by computer, they need to be expressed analytically to develop MIMO systems with diversity. Given a small area with an equivalent multi-path, we assume that a user u is at a certain “user point” $P^u(lambda _p^u,xi _p^u)$ in a cell, or (radius $lambda _p^u$ from origin, angle $xi _p^u)$ and that the user moves with movement $M^u(f_{max}^u, xi_v^u)$ around that point, or (Doppler frequency $f_{max}^u$, direction $xi_v^u$). The MU-MIMO channel model consists of a multipath environment, user parameters, and antenna configuration. A general formula of the correlation $ ho_{i - j,i' - j'}^{u - u'} (bm)$ between the channel matrix elements of users u and u' and one for given multipath conditions are derived. As a feature of the MU-MIMO channel, the movement factor $F^{u - u'}(gamma^u,xi_n ,xi_v^u)$, which means a fall coefficient of the spatial correlation calculated from only the user points of u and u', is also derived. As the difference in speed or direction between u and u' increases, $F^{u - u'}(gamma^u,xi_n ,xi_v^u)$ becomes smaller. Consequently, even if the path is LOS, $ ho_{i - j,i' - j'}^{u - u'} (bm)$ becomes low enough owing to the movement factor, even though the correlation in the single-user MIMO channel is high. If the parameters of u and u' are the same, the factor equals 1, and the channels correspond to the users' own channels and work like SU-MIMO channel. These analytical findings are verified by computer simulation.
Ryutaro DOI Xu BAI Toshitsugu SAKAMOTO Masanori HASHIMOTO
FPGA that exploits via-switches, which are a kind of non-volatile resistive RAMs, for crossbar implementation is attracting attention due to its high integration density and energy efficiency. Via-switch crossbar is responsible for the signal routing in the interconnections by changing on/off-states of via-switches. To verify the via-switch crossbar functionality after manufacturing, fault testing that checks whether we can turn on/off via-switches normally is essential. This paper confirms that a general differential pair comparator successfully discriminates on/off-states of via-switches, and clarifies fault modes of a via-switch by transistor-level SPICE simulation that injects stuck-on/off faults to atom switch and varistor, where a via-switch consists of two atom switches and two varistors. We then propose a fault diagnosis methodology for via-switches in the crossbar that diagnoses the fault modes according to the comparator response difference between the normal and faulty via-switches. The proposed method achieves 100% fault detection by checking the comparator responses after turning on/off the via-switch. In case that the number of faulty components in a via-switch is one, the ratio of the fault diagnosis, which exactly identifies the faulty varistor and atom switch inside the faulty via-switch, is 100%, and in case of up to two faults, the fault diagnosis ratio is 79%.
Daisuke KANEMOTO Shun KATSUMATA Masao AIHARA Makoto OHKI
This paper proposes a novel compressed sensing (CS) framework for reconstructing electroencephalogram (EEG) signals. A feature of this framework is the application of independent component analysis (ICA) to remove the interference from artifacts after undersampling in a data processing unit. Therefore, we can remove the ICA processing block from the sensing unit. In this framework, we used a random undersampling measurement matrix to suppress the Gaussian. The developed framework, in which the discrete cosine transform basis and orthogonal matching pursuit were used, was evaluated using raw EEG signals with a pseudo-model of an eye-blink artifact. The normalized mean square error (NMSE) and correlation coefficient (CC), obtained as the average of 2,000 results, were compared to quantitatively demonstrate the effectiveness of the proposed framework. The evaluation results of the NMSE and CC showed that the proposed framework could remove the interference from the artifacts under a high compression ratio.
Tsutomu INAMOTO Yoshinobu HIGAMI
In this paper, we aim to develop technologies for the circuit fault diagnosis and propose a formulation of a measure of a test pattern for the circuit fault diagnosis. Given a faulty circuit, the fault diagnosis is to deduce locations of faults that had occurred in the circuit. The fault diagnosis is executed in software before the failure analysis by which engineers inspect physical defects, and helps to improve the manufacturing process which yielded faulty circuits. The heart of the fault diagnosis is to distinguish between candidate faults by using test patterns, which are applied to the circuit-under-diagnosis (CUD), and thus test patterns that can distinguish as many faults as possible need to be generated. This fact motivates us to consider the test pattern measure based on the number of fault-pairs that become distinguished by a test pattern. To the best of the authors' knowledge, that measure requires the computational time of complexity order O(NF2), where NF denotes the number of candidate faults. Since NF is generally large for real industrial circuits, the computational time of the measure is long even when a high-performance computer is used. The formulation proposed in this paper makes it possible to calculate the measure in the computational complexity of O(NF log NF), and thus that measure is useful for the test pattern selection in the fault diagnosis. In computational experiments, the effectiveness of the formulation is demonstrated as samples of computational times of the measure calculated by the traditional and the proposed formulae and thorough comparisons between several greedy heuristics which are based on the measure.
Ying TONG Rui CHEN Ruiyu LIANG
LSTM network have shown to outperform in facial expression recognition of video sequence. In view of limited representation ability of single-layer LSTM, a hierarchical attention model with enhanced feature branch is proposed. This new network architecture consists of traditional VGG-16-FACE with enhanced feature branch followed by a cross-layer LSTM. The VGG-16-FACE with enhanced branch extracts the spatial features as well as the cross-layer LSTM extracts the temporal relations between different frames in the video. The proposed method is evaluated on the public emotion databases in subject-independent and cross-database tasks and outperforms state-of-the-art methods.
Jinu GONG Hoojin LEE Rumin YANG Joonhyuk KANG
Two-ray (TR) fading model is one of the fading models to represent a worst-case fading scenario. We derive the exact closed-form expressions of the generalized moment generating function (G-MGF) for the TR fading model, which enables us to analyze the numerous types of wireless communication applications. Among them, we carry out several analytical results for the TR fading model, including the exact ergodic capacity along with asymptotic expressions and energy detection performance. Finally, we provide numerical results to validate our evaluations.
Takahide ITO Yuichi NAKAMURA Kazuaki KONDO Espen KNOOP Jonathan ROSSITER
This paper introduces a novel skin-stretcher device for gently urging head rotation. The device pulls and/or pushes the skin on the user's neck by using servo motors. The user is induced to rotate his/her head based on the sensation caused by the local stretching of skin. This mechanism informs the user when and how much the head rotation is requested; however it does not force head rotation, i.e., it allows the user to ignore the stimuli and to maintain voluntary movements. We implemented a prototype device and analyzed the performance of the skin stretcher as a human-in-the-loop system. Experimental results define its fundamental characteristics, such as input-output gain, settling time, and other dynamic behaviors. Features are analyzed, for example, input-output gain is stable within the same installation condition, but various between users.
Kazuaki KONDO Takuto FUJIWARA Yuichi NAKAMURA
When using a gesture-based interface for pointing to targets on a wide screen, displaying a large pointer instead of a typical spot pattern reduces disturbance caused by measurement errors of user's pointing posture. However, it remains unclear why a large pointer helps facilitate easy pointing. To examine this issue, in this study we propose a mathematical model that formulates human pointing motions affected by a large pointer. Our idea is to describe the effect of the large pointer as human visual perception, because the user will perceive the pointer-target distance as being shorter than it actually is. We embedded this scheme, referred to as non-linear distance filter (NDF), into a typical feedback loop model designed to formulate human pointing motions. We also proposed a method to estimate NDF mapping from pointing trajectories, and used it to investigate the applicability of the model under three typical disturbance patterns: small vibration, smooth shift, and step signal. Experimental results demonstrated that the proposed NDF-based model could accurately reproduced actual pointing trajectories, achieving high similarity values of 0.89, 0.97, and 0.91 for the three respective disturbance patterns. The results indicate the applicability of the proposed method. In addition, we confirmed that the obtained NDF mappings suggested rationales for why a large pointer helps facilitate easy pointing.
Hanan T. Al-AWADHI Tomoki AONO Senling WANG Yoshinobu HIGAMI Hiroshi TAKAHASHI Hiroyuki IWATA Yoichi MAEDA Jun MATSUSHIMA
Multi-cycle Test looks promising a way to reduce the test application time of POST (Power-on Self-Test) for achieving a targeted high fault coverage specified by ISO26262 for testing automotive devices. In this paper, we first analyze the mechanism of Stuck-at Fault Detection Degradation problem in multi-cycle test. Based on the result of our analysis we propose a novel solution named FF-Control Point Insertion technique (FF-CPI) to achieve the reduction of scan-in patterns by multi-cycle test. The FF-CPI technique modifies the captured values of scan Flip-Flops (FFs) during capture operation by directly reversing the value of partial FFs or loading random vectors. The FF-CPI technique enhances the number of detectable stuck-at faults under the capture patterns. The experimental results of ISCAS89 and ITC99 benchmarks validated the effectiveness of FF-CPI technique in scan-in pattern reduction for POST.
Jun SHIBAYAMA Sumire TAKAHASHI Junji YAMAUCHI Hisamatsu NAKANO
A grating consisting of a periodic array of InSb-coated dielectric cylinders on a substrate is analyzed at THz frequencies using the frequency-dependent finite-difference time-domain method based on the trapezoidal recursive convolution technique. The transmission characteristics of an infinite periodic array are investigated not only at normal incidence but also at oblique incidence. The incident field is shown to be coupled to the substrate due to the guided-mode resonance (GMR), indicating the practical application of a grating coupler. For the sensor application, the frequency shift of the transmission dip is investigated with attention to the variation of the background refractive index. It is found that the shift of the dip involving the surface plasmon resonance is almost ten times as large as that of the dip only from the GMR. We finally analyze a finite periodic array of the cylinders. The field radiation from the array is discussed, when the field propagates through the substrate. It is shown that the radiation direction can be controlled with the frequency of the propagating field.
Ai YANAGIHARA Keita YAMAGUCHI Takashi GOH Kenya SUZUKI
We demonstrated a compact 16×16 multicast switch (MCS) made from a silica-based planar lightwave circuit (PLC). The switch utilizes a new electrical connection method based on surface mount technology (SMT). Five electrical connectors are soldered directly to the PLC by using the standard reflow process used for electrical devices. We reduced the chip size to half of one made with conventional wire bonding technology. We obtained satisfactory solder contacts and excellent switching properties. These results indicate that the proposed method is suitable for large-scale optical switches including MCSs, variable optical attenuators, dispersion compensators, and so on.
In recent years, deep neural network (DNN) has achieved considerable results on many artificial intelligence tasks, e.g. natural language processing. However, the computation complexity of DNN is extremely high. Furthermore, the performance of traditional von Neumann computing architecture has been slowing down due to the memory wall problem. Processing in memory (PIM), which places computation within memory and reduces the data movement, breaks the memory wall. ReRAM PIM is thought to be a available architecture for DNN accelerators. In this work, a novel design of ReRAM neuromorphic system is proposed to process DNN fully in array efficiently. The binary ReRAM array is composed of 2T2R storage cells and current mirror sense amplifiers. A dummy BL reference scheme is proposed for reference voltage generation. A binary DNN (BDNN) model is then constructed and optimized on MNIST dataset. The model reaches a validation accuracy of 96.33% and is deployed to the ReRAM PIM system. Co-design model optimization method between hardware device and software algorithm is proposed with the idea of utilizing hardware variance information as uncertainness in optimization procedure. This method is analyzed to achieve feasible hardware design and generalizable model. Deployed with such co-design model, ReRAM array processes DNN with high robustness against fabrication fluctuation.
Yujian FENG Fei WU Yimu JI Xiao-Yuan JING Jian YU
Sketch face recognition is to match sketch face images to photo face images. The main challenge of sketch face recognition is learning discriminative feature representations to ensure intra-class compactness and inter-class separability. However, traditional sketch face recognition methods encouraged samples with the same identity to get closer, and samples with different identities to be further, and these methods did not consider the intra-class compactness of samples. In this paper, we propose triplet-margin-center loss to cope with the above problem by combining the triplet loss and center loss. The triplet-margin-center loss can enlarge the distance of inter-class samples and reduce intra-class sample variations simultaneously, and improve intra-class compactness. Moreover, the triplet-margin-center loss applies a hard triplet sample selection strategy. It aims to effectively select hard samples to avoid unstable training phase and slow converges. With our approach, the samples from photos and from sketches taken from the same identity are closer, and samples from photos and sketches come from different identities are further in the projected space. In extensive experiments and comparisons with the state-of-the-art methods, our approach achieves marked improvements in most cases.
Dongliang CHEN Peng SONG Wenjing ZHANG Weijian ZHANG Bingui XU Xuan ZHOU
In this letter, we propose a novel robust transferable subspace learning (RTSL) method for cross-corpus facial expression recognition. In this method, on one hand, we present a novel distance metric algorithm, which jointly considers the local and global distance distribution measure, to reduce the cross-corpus mismatch. On the other hand, we design a label guidance strategy to improve the discriminate ability of subspace. Thus, the RTSL is much more robust to the cross-corpus recognition problem than traditional transfer learning methods. We conduct extensive experiments on several facial expression corpora to evaluate the recognition performance of RTSL. The results demonstrate the superiority of the proposed method over some state-of-the-art methods.