Non-orthogonal multipe access based multiple-input multiple-output system (MIMO-NOMA) has been widely used in improving user's achievable rate of millimeter wave (mmWave) communication. To meet different requirements of each user in multi-user beams, this paper proposes a power allocation algorithm to satisfy the quality of service (QoS) of head user while maximizing the minimum rate of edge users from the perspective of max-min fairness. Suppose that the user who is closest to the base station (BS) is the head user and the other users are the edge users in each beam in this paper. Then, an optimization problem model of max-min fairness criterion is developed under the constraints of users' minimum rate requirements and the total transmitting power of the BS. The bisection method and Karush-Kuhn-Tucher (KKT) conditions are used to solve this complex non-convex problem, and simulation results show that both the minimum achievable rates of edge users and the average rate of all users are greatly improved significantly compared with the traditional MIMO-NOMA, which only consider max-min fairness of users.

In this paper, a circuit based on a field programmable analog array (FPAA) is proposed for three types of chaotic spiking oscillator (CSO). The input/output conversion characteristics of a specific element in the FPAA can be defined by the user. By selecting the proper characteristics, three types of CSO are realized without changing the structure of the circuit itself. Chaotic attractors are observed in a hardware experiment. It is confirmed that the dynamics of the CSOs are consistent with numerical simulations.

When mission-critical applications are provided over a network, high availability is required in addition to a low delay. This paper proposes a multi-homing network design model, named MHND, that achieves low delay, high availability, and the order guarantee of events. MHND maintains the event occurrence order with a multi-homing configuration using conservative synchronization. We formulate MHND as an integer linear programming problem to minimize the delay. We prove that the distributed server allocation problem with MHND is NP-complete. Numerical results indicate that, as a multi-homing number, which is the number of servers to which each user belongs, increases, the availability increases while increasing the delay. Noteworthy, two or more multi-homing can achieve approximately an order of magnitude higher availability compared to that of conventional single-homing at the expense of a delay increase up to two times. By using MHND, flexible network design is achieved based on the acceptable delay in service and the required availability.

Indoor free space optical (FSO) communication technology that provides high-speed connectivity to edge users is expected to be introduced in the near future mobile communication system, where the silicon photonics solid-state beam scanning device is a promising tool because of its low cost, long-term reliability, and other beneficial properties. However, the current two-dimensional beam scanning devices using grating coupler arrays have difficulty in increasing the transmission capacity because of bandwidth regulation. To solve the problem, we have introduced a broadband surface optical coupler, “elephant coupler,” which has great potential for combining wavelength and spatial division multiplexing technologies into the beam scanning device, as an alternative to grating couplers. The prototype port-selective silicon beam scanning device fabricated using a 300 mm CMOS pilot line achieved broadband optical beam emission with a 1 dB-loss bandwidth of 40 nm and demonstrated beam scanning using an imaging lens. The device has also exhibited free-space signal transmission of non-return-to-zero on-off-keying signals at 10 Gbps over a wide wavelength range of 60 nm. In this paper, we present an overview of the developed beam scanning device. Furthermore, the theoretical design guidelines for indoor mobile FSO communication are discussed.

This paper describes a public web service called Kiite Cafe that lets users get together virtually to listen to music. When users listen to music on Kiite Cafe, their experiences are enhanced by two architectures: (i) visualization of each user's reactions, and (ii) selection of songs from users' favorite songs. These architectures enable users to feel social connection with others and the joy of introducing others to their favorite songs as if they were together listening to music in person. In addition, the architectures provide three user experiences: (1) motivation to react to played songs, (2) the opportunity to listen to a diverse range of songs, and (3) the opportunity to contribute as a curator. By analyzing the behavior logs of 2,399 Kiite Cafe users over a year, we quantitatively show that these user experiences can generate various effects (e.g., users react to a more diverse range of songs on Kiite Cafe than when listening alone). We also discuss how our proposed architectures can enrich music listening experiences with others.

The design of codes for distributed storage systems that protects from node failures has been studied for years, and locally repairable code (LRC) is such a method that gives a solution for fast recovery of node failures. Linear complementary dual code (LCD code) is useful for preventing malicious attacks, which helps to secure the system. In this paper, we combine LRC and LCD code by integration of enhancing security and repair efficiency, and propose some techniques for constructing LCD codes with their localities determined. On the basis of these methods and inheriting previous achievements of optimal LCD codes, we give optimal or near-optimal [n, k, d;r] LCD codes for k≤6 and n≥k+1 with relatively small locality, mostly r≤3. Since all of our obtained codes are distance-optimal, in addition, we show that the majority of them are r-optimal and the other 63 codes are all near r-optimal, according to CM bound.

Mission-critical monitoring services, such as finding criminals with a monitoring camera, require rapid detection of newly updated data, where suppressing delay is desirable. Taking this direction, this paper proposes a network design scheme to minimize this delay for monitoring services that consist of Internet-of-Things (IoT) devices located at terminal endpoints (TEs), databases (DB), and applications (APLs). The proposed scheme determines the allocation of DB and APLs and the selection of the server to which TE belongs. DB and APL are allocated on an optimal server from multiple servers in the network. We formulate the proposed network design scheme as an integer linear programming problem. The delay reduction effect of the proposed scheme is evaluated under two network topologies and a monitoring camera system network. In the two network topologies, the delays of the proposed scheme are 78 and 80 percent, compared to that of the conventional scheme. In the monitoring camera system network, the delay of the proposed scheme is 77 percent compared to that of the conventional scheme. These results indicate that the proposed scheme reduces the delay compared to the conventional scheme where APLs are located near TEs. The computation time of the proposed scheme is acceptable for the design phase before the service is launched. The proposed scheme can contribute to a network design that detects newly added objects quickly in the monitoring services.

In the current heterogeneous wireless communication system, the sharp rise in energy consumption and the emergence of new service types pose great challenges to nowadays radio access network selection algorithms which do not take care of these new trends. So the proposed energy efficiency based multi-service heterogeneous access network selection algorithm-ESRS (Energy Saving Radio access network Selection) is intended to reduce the energy consumption caused by the traffic in the mobile network system composed of Base Stations (BSs) and Access Points (APs). This algorithm models the access network selection problem as a Multiple-Attribute Decision-Making (MADM) problem. To solve this problem, lots of methods are combined, including analytic Hierarchy Process (AHP), weighted grey relational analysis (GRA), entropy theory, simple additive weight (SAW), and utility function theory. There are two main steps in this algorithm. At first, the proposed algorithm gets the result of the user QoS of each network by dealing with the related QoS parameters, in which entropy theory and AHP are used to determine the QoS comprehensive weight, and the SAW is used to get each network's QoS. In addition to user QoS, parameters including user throughput, energy consumption utility and cost utility are also calculated in this step. In the second step, the fuzzy theory is used to define the weight of decision attributes, and weighted grey relational analysis (GRA) is used to calculate the network score, which determines the final choice. Because the fuzzy weight has a preference for the low energy consumption, the energy consumption of the traffic will be saved by choosing the network with the least energy consumption as much as possible. The simulation parts compared the performance of ESRS, ABE and MSNS algorithms. The numerical results show that ESRS algorithm can select the appropriate network based on the service demands and network parameters. Besides, it can effectively reduce the system energy consumption and overall cost while still maintaining a high overall QoS value and a high system throughput, when compared with the other two algorithms.

This paper proposes a virtual network function (VNF) placement model considering both availability and probabilistic protection for the service delay to minimize the service deployment cost. Both availability and service delay are key requirements of services; a service provider handles the VNF placement problem with the goal of minimizing the service deployment cost while meeting these and other requirements. The previous works do not consider the delay of each route which the service can take when considering both availability and delay in the VNF placement problem; only the maximum delay was considered. We introduce probabilistic protection for service delay to minimize the service deployment cost with availability. The proposed model considers that the probability that the service delay, which consists of networking delay between hosts and processing delay in each VNF, exceeds its threshold is constrained within a given value; it also considers that the availability is constrained within a given value. We develop a two-stage heuristic algorithm to solve the VNF placement problem; it decides primary VNF placement by solving mixed-integer second-order cone programming in the first stage and backup VNF placement in the second stage. We observe that the proposed model reduces the service deployment cost compared to a baseline that considers the maximum delay by up to 12%, and that it obtains a feasible solution while the baseline does not in some examined situations.

Reducing on-chip microwave crosstalk is crucial for semiconductor spin qubit integration. Toward crosstalk reduction and qubit integration, we investigate on-chip microwave crosstalk for gate electrode pad designs with (i) etched trenches between contact pads or (ii) contact pads with reduced sizes. We conclude that the design with feature (ii) is advantageous for high-density integration of semiconductor qubits with small crosstalk (below -25 dB at 6 GHz), favoring the introduction of flip-chip bonding.

This paper proposes a backup resource allocation model for virtual network functions (VNFs) to minimize the total allocated computing capacity for backup with considering the service delay. If failures occur to primary hosts, the VNFs in failed hosts are recovered by backup hosts whose allocation is pre-determined. We introduce probabilistic protection, where the probability that the protection by a backup host fails is limited within a given value; it allows backup resource sharing to reduce the total allocated computing capacity. The previous work does not consider the service delay constraint in the backup resource allocation problem. The proposed model considers that the probability that the service delay, which consists of networking delay between hosts and processing delay in each VNF, exceeds its threshold is constrained within a given value. We introduce a basic algorithm to solve our formulated delay-constraint optimization problem. In a problem with the size that cannot be solved within an acceptable computation time limit by the basic algorithm, we develop a simulated annealing algorithm incorporating Yen's algorithm to handle the delay constraint heuristically. We observe that both algorithms in the proposed model reduce the total allocated computing capacity by up to 56.3% compared to a baseline; the simulated annealing algorithm can get feasible solutions in problems where the basic algorithm cannot.

Since the outbreak of IoT malware “Mirai,” several incidents have occurred in which IoT devices have been infected with malware. The malware targets IoT devices whose Telnet and SSH services are accessible from the Internet and whose ID/Password settings are not strong enough. Several IoT malware families, including Mirai, are also known that restrict access to Telnet and other services to keep the devices from being infected by other malware after infection. However, tens of thousands of devices in Japan can be still accessed Telnet services over the Internet according to network scan results. Does this imply that these devices can avoid malware infection by setting strong enough passwords, and thus cannot be used as a stepping stone for cyber attacks? In February 2019, we initiated the National Operation Toward IoT Clean Environment (NOTICE) project in Japan to investigate IoT devices with weak credentials and notify the device users. In this study, we analyze the results of the NOTICE project from February 2021 to May 2021 and the results of the large-scale darknet monitoring to reveal whether IoT devices with weak credentials are infected with malware or not. Moreover, we analyze the IoT devices with weak credentials to find out the factors that prevent these devices from being infected with malware and to assess the risk of abuse for cyber attacks. From the results of the analysis, it is discovered that approximately 2,000 devices can be easily logged in using weak credentials in one month in Japan. We also clarify that no device are infected with Mirai and its variants malware due to lack of functions used for malware infection excluding only one host. Finally, even the devices which are logged in by NOTICE project are not infected with Mirai, we find that at least 80% and 93% of the devices can execute arbitrary scripts and can send packets to arbitrary destinations respectively.

In recent years, the market size for internet advertising has been increasing with the expansion of the Internet. Among the internet advertising technologies, affiliate services, which are a performance-based service, use cookies to track and measure the performance of affiliates. However, for the purpose of safeguarding personal information, cookies tend to be regulated, which leads to concerns over whether normal tracking by cookies works as intended. Therefore, in this study, the recent problems from the perspectives of affiliates, affiliate service providers, and advertisers are extracted, and a framework of cookie-independent measuring engagement method using access logs is proposed and open issues are discussed for future affiliate services.

The use of reports in action has grown significantly in recent decades as data has become digitized. However, traditional statistical methods no longer work due to the uncontrollable expansion and complexity of raw data. Therefore, it is crucial to clean and analyze financial data using modern machine learning methods. In this study, the quarterly reports (i.e. 10Q filings) of publicly traded companies in the United States were analyzed by utilizing data mining methods. The study used 8905 quarterly reports of companies from 2019 to 2022. The proposed approach consists of two phases with a combination of three different machine learning methods. The first two methods were used to generate a dataset from the 10Q filings with extracting new features, and the last method was used for the classification problem. Doc2Vec method in Gensim framework was used to generate vectors from textual tags in 10Q filings. The generated vectors were clustered using the K-means algorithm to combine the tags according to their semantics. By this way, 94000 tags representing different financial items were reduced to 20000 clusters consisting of these tags, making the analysis more efficient and manageable. The dataset was created with the values corresponding to the tags in the clusters. In addition, PriceRank metric was added to the dataset as a class label indicating the price strength of the companies for the next financial quarter. Thus, it is aimed to determine the effect of a company's quarterly reports on the market price of the company for the next period. Finally, a Convolutional Neural Network model was utilized for the classification problem. To evaluate the results, all stages of the proposed hybrid method were compared with other machine learning techniques. This novel approach could assist investors in examining companies collectively and inferring new, significant insights. The proposed method was compared with different approaches for creating datasets by extracting new features and classification tasks, then eventually tested with different metrics. The proposed approach performed comparatively better than the other machine learning methods to predict future price strength based on past reports with an accuracy of 84% on the created 10Q filings dataset.

High-performance deep neural network (DNN)-based systems are in high demand in edge environments. Due to its high computational complexity, it is challenging to deploy DNNs on edge devices with strict limitations on computational resources. In this paper, we derive a compact while highly-accurate DNN model, termed dsODENet, by combining recently-proposed parameter reduction techniques: Neural ODE (Ordinary Differential Equation) and DSC (Depthwise Separable Convolution). Neural ODE exploits a similarity between ResNet and ODE, and shares most of weight parameters among multiple layers, which greatly reduces the memory consumption. We apply dsODENet to a domain adaptation as a practical use case with image classification datasets. We also propose a resource-efficient FPGA-based design for dsODENet, where all the parameters and feature maps except for pre- and post-processing layers can be mapped onto on-chip memories. It is implemented on Xilinx ZCU104 board and evaluated in terms of domain adaptation accuracy, inference speed, FPGA resource utilization, and speedup rate compared to a software counterpart. The results demonstrate that dsODENet achieves comparable or slightly better domain adaptation accuracy compared to our baseline Neural ODE implementation, while the total parameter size without pre- and post-processing layers is reduced by 54.2% to 79.8%. Our FPGA implementation accelerates the inference speed by 23.8 times.

In industry, automatic speech recognition has come to be a competitive feature for embedded products with poor hardware resources. In this work, we propose a tiny end-to-end speech recognition model that is lightweight and easily deployable on edge platforms. First, instead of sophisticated network structures, such as recurrent neural networks, transformers, etc., the model we propose mainly uses convolutional neural networks as its backbone. This ensures that our model is supported by most software development kits for embedded devices. Second, we adopt the basic unit of MobileNet-v3, which performs well in computer vision tasks, and integrate the features of the hidden layer at different scales, thus compressing the number of parameters of the model to less than 1 M and achieving an accuracy greater than that of some traditional models. Third, in order to further reduce the CPU computation, we directly extract acoustic representations from 1-dimensional speech waveforms and use a self-supervised learning approach to encourage the convergence of the model. Finally, to solve some problems where hardware resources are relatively weak, we use a prefix beam search decoder to dynamically extend the search path with an optimized pruning strategy and an additional initialism language model to capture the probability of between-words in advance and thus avoid premature pruning of correct words. In our experiments, according to a number of evaluation categories, our end-to-end model outperformed several tiny speech recognition models used for embedded devices in related work.

Mobility as a Service (MaaS) is expected to spread globally and in Japan as a solution for social issues related to transportation. Researchers have conducted MaaS trials in several cities. However, only a few trials have reached full-scale practical use. Therefore, it is essential to clarify issues such as the business model and user acceptability and seek solutions to social problems rather than simply conducting trials. This paper describes the introduction of a MaaS project supported by the Japanese government known as the “Smart Mobility Challenge” project, conducted in 2020 and 2021. We employed five themes necessary for social implementation from the first trial of this MaaS project. As a consortium, we also promoted regional demonstrations by soliciting regional applications based on these five themes. In addition, we conducted fundamental research using data from the MaaS projects to clarify local transportation issues in detail, collect residents' mobile behavior data, and assess the project's effects on the participant's happiness. We employed the life-space assessment method to investigate the spread of the residents' behavioral life-space resulting from using mobility services. The spread of the life-space mobility before and after using mobility services confirmed an expansion of the life-space because of specific services. Moreover, we conducted questionnaire surveys and clarified the relationships between life-space assessment, human characteristics, and subjective happiness using path analysis. We also conducted a persona-based approach in addition to objective data collection using GPS and wearable monitors and a web-based questionnaire. We found differences between the actual participants and participants assumed by local governments. We conducted interviews and developed tips for improving mobility service. We propose that qualitative data help clarify the image of mobility services that meet the residents' needs.

Microservice architecture has been widely adopted for large-scale applications because of its benefits of scalability, flexibility, and reliability. However, microservice architecture also proposes new challenges in diagnosing root causes of performance degradation. Existing methods rely on labeled data and suffer a high computation burden. This paper proposes MicroState, an unsupervised and lightweight method to pinpoint the root cause with detailed descriptions. We decompose root cause diagnosis into element location and detailed reason identification. To mitigate the impact of element heterogeneity and dynamic invocations, MicroState generates elements' invoked states, quantifies elements' abnormality by warping-based state comparison, and infers the anomalous group. MicroState locates the root cause element with the consideration of anomaly frequency and persistency. To locate the anomalous metric from diverse metrics, MicroState extracts metrics' trend features and evaluates metrics' abnormality based on their trend feature variation, which reduces the reliance on anomaly detectors. Our experimental evaluation based on public data of the Artificial intelligence for IT Operations Challenge (AIOps Challenge 2020) shows that MicroState locates root cause elements with 87% precision and diagnoses anomaly reasons accurately.

This letter proposes a novel lightweight deep learning object detector named LW-YOLOv4-tiny, which incorporates the convolution block feature addition module (CBFAM). The novelty of LW-YOLOv4-tiny is the use of channel-wise convolution and element-wise addition in the CBFAM instead of utilizing the concatenation of different feature maps. The model size and computation requirement are reduced by up to 16.9 Mbytes, 5.4 billion FLOPs (BFLOPS), and 11.3 FPS, which is 31.9%, 22.8%, and 30% smaller and faster than the most recent version of YOLOv4-tiny. From the MSCOCO2017 and PASCAL VOC2012 benchmarks, LW-YOLOv4-tiny achieved 40.2% and 69.3% mAP, respectively.

In this brief paper, we examine polarimetric scattering characteristics for understanding seasonal change of paddy rice growth by using quad-polarimetric synthetic aperture radar (SAR) data in the X-band. Here we carry out polarimetric scattering measurement for a simplified paddy rice model in an anechoic chamber at X-band frequency to acquire the the quad polarimetric SAR data from the model. The measurements are performed several times for each growth stage of the paddy rice corresponding to seasonal change. The model-based scattering power decomposition is used for the examination of polarimetric features of the paddy rice model. It is found from the result of the polarimetric SAR image analysis for the measurement data that the growth state of the paddy rice in each stage can be understood by considering the ratio of the decomposition powers, when the planting direction of the paddy rice is not only normal but also oblique to radar direction. We can also see that orientation angle compensation (OAC) is useful for improving the accuracy of the growth stage observation in late vegetative stage for oblique planting case.