End-to-end loss and delay are both fundamental metrics in network performance evaluation, and accurate measurements for these end-to-end metrics are one of the keys to keeping delay/loss-sensitive applications (e.g., audio/video conferencing, IP telephony, or telesurgery) comfortable on networks. In our previous work [1], we proposed a parallel flow monitoring method that can provide accurate active measurements of end-to-end delay. In this method, delay samples of a target flow increase by utilizing the observation results of other flows sharing the source/destination with the target flow. In this paper, to improve accuracy of loss measurements, we propose a loss measurement method by extending our delay measurement method. Additionally, we improve the loss measurement method so that it enables to fully utilize information of all flows including flows with different source and destination. We evaluate the proposed method through theoretical and simulation analyses. The evaluations show that the accuracy of the proposed method is bounded by theoretical upper/lower bounds, and it is confirmed that it reduces the error of loss rate estimations by 57.5% on average.

The multi-FPGA system known as, the Flow-in-Cloud (FiC) system, is composed of mid-range FPGAs that are directly interconnected by high-speed serial links. FiC is currently being developed as a server for multi-access edge computing (MEC), which is one of the core technologies of 5G. Because the applications of MEC are sometimes timing-critical, a static time division multiplexing (STDM) network has been used on FiC. However, the STDM network exhibits the disadvantage of decreasing link utilization, especially under light traffic. To solve this problem, we propose a hybrid router that combines packet switching for low-priority communication and STDM for high-priority communication. In our hybrid network, the packet switching uses slots that are unused by the STDM; therefore, best-effort communication by packet switching and QoS guarantee communication by the STDM can be used simultaneously. Furthermore, to improve each link utilization under a low network traffic load, we propose a dynamic communication switching algorithm. In our algorithm, each router monitors the network load metrics, and according to the metrics, timing-critical tasks select the STDM according to the metrics only when congestion occurs. This can achieve both QoS guarantee and efficient utilization of each link with a small resource overhead. In our evaluation, the dynamic algorithm was up to 24.6% faster on the execution time with a high network load compared to the packet switching on a real multi-FPGA system with 24 boards.

It has been widely recognized that in compressed sensing, many restricted isometry property (RIP) conditions can be easily obtained by using the null space property (NSP) with its null space constant (NSC) 0<θ≤1 to construct a contradicted method for sparse signal recovery. However, the traditional NSP with θ=1 will lead to conservative RIP conditions. In this paper, we extend the NSP with 0<θ<1 to a scale NSP, which uses a factor τ to scale down all vectors belonged to the Null space of a sensing matrix. Following the popular proof procedure and using the scale NSP, we establish more relaxed RIP conditions with the scale factor τ, which guarantee the bounded approximation recovery of all sparse signals in the bounded noisy through the constrained l1 minimization. An application verifies the advantages of the scale factor in the number of measurements.

This paper considers tracking of a non-cooperative emitter based on a single sensor. To this end, the direct target motion analysis (DTMA) approach, where the target state is straightforwardly achieved from the received signal, is exploited. In order to achieve observability, the sensor has to perform a maneuver relative to the emitter. By suitably building an approximated likelihood function, the unscented Kalman filter (UKF), which is able to work under high nonlinearity of the measurement model, is adopted to recursively estimate the target state. Besides, the posterior Cramér-Rao bound (PCRB) of DTMA, which can be used as performance benchmark, is also achieved. The effectiveness of proposed method is verified via simulation experiments.

A searchable symmetric encryption (SSE) scheme is a method that searches encrypted data without decrypting it. In this paper, we address the substring search problem such that for a set D of documents and a pattern p, we find all occurrences of p in D. Here, a document and a pattern are defined as a string. A directed acyclic word graph (DAWG), which is a deterministic finite automaton, is known for solving a substring search problem on a plaintext. We improve a DAWG so that all transitions of a DAWG have distinct symbols. Besides, we present a space-efficient and secure substring SSE scheme using an improved DAWG. The proposed substring SSE scheme consists of an index with a simple structure, and the size is O(n) for the total size n of documents.

It is now becoming important for mobile cellular networks to accommodate all kinds of Internet of Things (IoT) communications. However, the contention-based random access and radio resource allocation used in traditional cellular networks, which are optimized mainly for human communications, cannot efficiently handle large-scale IoT communications. For this reason, standardization activities have emerged to serve IoT devices such as Cellular-IoT (C-IoT). However, few studies have been directed at evaluating the performance of C-IoT communications with periodic data transmissions, despite this being a common characteristic of many IoT communications. In this paper, we give the performance analysis results of mobile cellular networks supporting periodic C-IoT communications, focusing on the performance differences between LTE and Narrowband-IoT (NB-IoT) networks. To achieve this, we first construct an analysis model for end-to-end performance of both the control plane and data plane, including random access procedures, radio resource allocation, establishing bearers in the Evolved Packet Core network, and user-data transmissions. In addition, we include the impact of the immediate release of the radio resources proposed in 3GPP. Numerical evaluations show that NB-IoT can support more IoT devices than LTE, up to 8.7 times more, but imposes a significant delay in data transmissions. We also confirm that the immediate release of radio resources increases the network capacity by up to 17.7 times.

This paper proposes a novel random access identifier (RAID)-linked receiver beamforming method for time division duplex (TDD)-based random access. When the number of receiver antennas at the base station is large in a massive multiple-input multiple-output (MIMO) scenario, the channel estimation accuracy per receiver antenna at the base station receiver is degraded due to the limited received signal power per antenna from the user terminal. This results in degradation in the receiver beamforming (BF) or antenna diversity combining and active RAID detection. The purpose of the proposed method is to achieve accurate active RAID detection and channel estimation with a reasonable level of computational complexity at the base station receiver. In the proposed method, a unique receiver BF vector applied at the base station is linked to each of the M RAIDs prepared by the system. The user terminal selects an appropriate pair comprising a receiver BF vector and a RAID in advance based on the channel estimation results in the downlink assuming channel reciprocity in a TDD system. Therefore, per-receiver antenna channel estimation for receiver BF is not necessary in the proposed method. Furthermore, in order to utilize fully the knowledge of the channel at the user transmitter, we propose applying transmitter filtering (TF) to the proposed method for effective channel shortening in order to increase the orthogonal preambles for active RAID detection and channel estimation prepared for each RAID. Computer simulation results show that the proposed method greatly improves the accuracy of active RAID detection and channel estimation. This results in lower error rates than that for the conventional method performing channel estimation at each antenna in a massive MIMO environment.

Searchable symmetric encryption (SSE) enables clients to search encrypted data. Curtmola et al. (ACM CCS 2006) formalized a model and security notions of SSE and proposed two concrete constructions called SSE-1 and SSE-2. After the seminal work by Curtmola et al., SSE becomes an active area of encrypted search. In this paper, we focus on two unnoticed problems in the seminal paper by Curtmola et al. First, we show that SSE-2 does not appropriately implement Curtmola et al.'s construction idea for dummy addition. We refine SSE-2's (and its variants') dummy-adding procedure to keep the number of dummies sufficiently many but as small as possible. We then show how to extend it to the dynamic setting while keeping the dummy-adding procedure work well and implement our scheme to show its practical efficiency. Second, we point out that the SSE-1 can cause a search error when a searched keyword is not contained in any document file stored at a server and show how to fix it.

At this stage, research in the field of Few-shot image classification (FSC) has made good progress, but there are still many difficulties in the field of Few-shot object detection (FSOD). Almost all of the current FSOD methods face catastrophic forgetting problems, which are manifested in that the accuracy of base class recognition will drop seriously when acquiring the ability to recognize Novel classes. And for many methods, the accuracy of the model will fall back as the class increases. To address this problem we propose a new memory-based method called Memorable Faster R-CNN (MemFRCN), which makes the model remember the categories it has already seen. Specifically, we propose a new tow-stage object detector consisting of a memory-based classifier (MemCla), a fully connected neural network classifier (FCC) and an adaptive fusion block (AdFus). The former stores the embedding vector of each category as memory, which enables the model to have memory capabilities to avoid catastrophic forgetting events. The final part fuses the outputs of FCC and MemCla, which can automatically adjust the fusion method of the model when the number of samples increases so that the model can achieve better performance under various conditions. Our method can perform well on unseen classes while maintaining the detection accuracy of seen classes. Experimental results demonstrate that our method outperforms other current methods on multiple benchmarks.

Recently, most signal processing algorithms have been developed with floating-point arithmetic, while the fixed-point arithmetic is more popular with most commercial devices and low-power real-time applications which are implemented on embedded/ASIC/FPGA systems. Therefore, the optimal Floating-point to Fixed-point Conversion (FFC) methodology is a promising solution. In this paper, we propose the FFC consisting of signal grouping technique and simulation-based word length optimization. In order to evaluate the performance of the proposed technique, simulations are carried out and hardware co-simulation on Field Programmable Gate Arrays (FPGAs) platform have been applied to complex Digital Signal Processing (DSP) algorithms: Linear Time Invariant (LTI) systems, multi-mode Fast Fourier Transform (FFT) circuit for IEEE 802.11 ax WLAN Devices and the calibration algorithm of gain and clock skew in Time-Interleaved ADC (TI-ADC) using Adaptive Noise Canceller (ANC). The results show that the proposed technique can reduce the hardware cost about 30% while being able to maintain its speed and reliability.

Various types of indices for estimating functional connectivity have been developed over the years that have introduced effective approaches to discovering complex neural networks in the brain. Two significant examples are the phase lag index (PLI) and transfer entropy (TE). Both indices have specific benefits; PLI, defined using instantaneous phase dynamics, achieves high spatiotemporal resolution, whereas transfer entropy (TE), defined using information flow, reveals directed network characteristics. However, the relationship between these indices remains unclear. In this study, we hypothesize that there exists a complementary relationship between PLI and TE to discover new aspects of functional connectivity that cannot be detected using either PLI or TE. To validate this hypothesis, we evaluated the synchronization in a coupled Rössler model using PLI and TE. Consequently, we proved the existence of non-linear relationships between PLI and TE. Both indexes exhibit a specific trend that demonstrates a linear relationship in the region of small TE values. However, above a specific TE value, PLI converges to a constant irrespective of the TE value. In addition to this relational difference in synchronization, there is another characteristic difference between these indices. Moreover, by virtue of its finer temporal resolution, PLI can capture the temporal variability of the degree of synchronization, which is called dynamical functional connectivity. TE lacks this temporal characteristic because it requires a longer evaluation period in this estimation process. Therefore, combining the advantages of both indices might contribute to revealing complex spatiotemporal functional connectivity in brain activity.

Convolutional neural network (CNN) based vehicle re-identificatioin (ReID) inevitably has many disadvantages, such as information loss caused by downsampling operation. Therefore we propose a vision transformer (Vit) based vehicle ReID method to solve this problem. To improve the feature representation of vision transformer and make full use of additional vehicle information, the following methods are presented. (I) We propose a Quadratic Split Architecture (QSA) to learn both global and local features. More precisely, we split an image into many patches as “global part” and further split them into smaller sub-patches as “local part”. Features of both global and local part will be aggregated to enhance the representation ability. (II) The Auxiliary Information Embedding (AIE) is proposed to improve the robustness of the model by plugging a learnable camera/viewpoint embedding into Vit. Experimental results on several benchmarks indicate that our method is superior to many advanced vehicle ReID methods.

In wireless sensor networks (WSNs), wireless power transfer (WPT) has been studied as an energy-harvesting technique for prolonging their network lifetime. The WPT can supply power resources to sensor nodes (SNs) wirelessly, however, the reception (harvesting) power at SNs depends on their distance from a WPT equipment (WPTE), leading to the location-dependent non-uniformity in the reception power among SNs. For the fixed-located WPTE, SNs distant from the WPTE suffer from insufficient reception power. To handle this problem, this paper proposes a novel network structure introducing multiple hybrid access points (HAPs), which equip two functions of conventional cluster head function, including data collection and relay transmission, and WPT function. Then, these HAPs take terms providing both functions. By periodically rotating the HAP providing the WPT function, the location of the WPTE can be changed, which reduces the non-uniformity in the SN reception power. Also, this paper proposes a clustering scheme based on the residual power at SNs to reduce their power depletion under the proposed network structure. The evaluation results through computer simulation show that the proposed system reduces the non-uniformity in the SN reception power and the power depletion at the SNs and then improves the data collection rate, compared with the conventional systems.

In this paper, we propose a new rate-based congestion control method for Named Data Networking (NDN) using additive increase multiplicative decrease (AIMD) and explicit rate notification. In the proposed method, routers notify a corresponding consumer of bottleneck bandwidth by use of Data packets, in a relatively long interval. In addition, routers monitor outgoing faces using the leaky bucket mechanism. When congestion is detected, the routers report this to corresponding consumers using negative-acknowledgment (NACK) packets. A consumer sets its Interest sending rate to the reported rate when a new value is reported. In addition, the consumer adjusts the sending rate to be around the reported rate based on the AIMD mechanism at Data/NACK packet reception. Computer simulations show that the proposed method achieves a high throughput performance and max-min fairness thanks to the effective congestion avoidance.

A path loss prediction formula for IoT (Internet of Things) wireless communication close to ceiling beams in the 920MHz band is presented. In first step of our investigation, we conduct simulations using the FDTD (Finite Difference Time Domain) method and propagation tests close to a beam on the ceiling of a concrete building. In the second step, we derive a path loss prediction formula from the simulation results by using the FDTD method, by dividing into three regions of LoS (line-of-sight) situation, situation in the vicinity of the beam, and NLoS (non-line-of-sight) situation, depending on the positional relationship between the beam and transmitter (Tx) and receiver (Rx) antennas. For each condition, the prediction formula is expressed by a relatively simple form as a function of height of the antennas with respect to the beam bottom. Thus, the prediction formula is very useful for the wireless site planning for the IoT wireless devices set close to concrete beam ceiling.

Device-to-device (D2D) relay enhances the capacity of a mobile network. If the channel quality of a user equipment (UE) is bad, the UE asks a neighbor to get its data from the base station and forward the data to it by using D2D communication. Since cellular and D2D communication can share spectrum resources, the spectral efficiency will rise. As UEs are owned by self-interested users, they may not provide relay services gratis. Thus, some incentive methods let UEs exchange tokens to buy and sell relay services. However, they assume that each relay service is worth one token and offers a fixed data rate, which lacks flexibility. Through the law of supply and demand, this paper proposes an economy aware token-based incentive (EAT-BI) strategy. A supplier (i.e., the service provider) charges different prices for its relay service with different rates. A consumer (i.e., the service requestor) takes different policies to choose a supplier based on its tokens and may bargain with suppliers to avoid starvation. Simulation results show that EAT-BI can efficiently promote D2D relay use and increase throughput under different mobility models of UEs.

Multi-core fiber (MCF) is one of the most promising candidates for achieving ultra-wideband optical transmission in the near future. To build a network using MCF, a high-performance and reliable MCF connector is indispensable. We have developed an SC-type optical connector for MCF and confirmed its excellent optical performance, mechanical durability, and environmental reliability. To put the communication system using MCF into practical use, it is necessary to establish a procedure for measuring the initial connection characteristics. Fan-in / fan-out (FIFO) devices are indispensable for measuring the connection characteristics of MCF connectors. To measure the return loss of the MCF connector, it is necessary to remove the influence of reflection at the FIFO itself and at the connection points with the FIFO. In this paper, we compare four types of return loss measurement procedures (three usual method and a new method we proposed) and find that most stable measurement method involves using our new method, the OCWR method without FIFO. The OCWR method without FIFO is considered to be the most advantageous when used for outgoing inspection of connectors. The reason is that it eliminates the measurement uncertainty caused by the FIFO and enables speedy measurement.

Statical causal discovery is an approach to infer the causal relationship between observed variables whose causalities are not revealed. LiNGAM (Linear Non-Gaussian Acyclic Model), an algorithm for causal discovery, can calculate the causal relationship uniquely if the independent components of variables are assumed to be non-Gaussian. However, use-cases of LiNGAM are limited because of its O(d3x) computational complexity, where dx is the number of variables. This paper shows two approaches to accelerate LiNGAM causal discovery: SIMD utilization for LiNGAM's mathematical matrixes operations and MPI parallelization. We evaluate the implementation with the supercomputer Fugaku. Using 96 nodes of Fugaku, our improved version can achieve 17,531 times faster than the original OSS implementation (completed in 17.7 hours).

In this study, we propose an accurate range-Doppler analysis algorithm for moving multiple objects in a short range using microwave (including millimeter wave) radars. As a promising Doppler analysis for the above model, we previously proposed a weighted kernel density (WKD) estimator algorithm, which overcomes several disadvantages in coherent integration based methods, such as a trade-off between temporal and frequency resolutions. However, in handling multiple objects like human body, it is difficult to maintain the accuracy of the Doppler velocity estimation, because there are multiple responses from multiple parts of object, like human body, incurring inaccuracies in range or Doppler velocity estimation. To address this issue, we propose an iterative algorithm by exploiting an output of the WKD algorithm. Three-dimensional numerical analysis, assuming a human body model in motion, and experimental tests demonstrate that the proposed algorithm provides more accurate, high-resolution range-Doppler velocity profiles than the original WKD algorithm, without increasing computational complexity. Particularly, the simulation results show that the cumulative probabilities of range errors within 10mm, and Doppler velocity error within 0.1m/s are enhanced from 34% (by the former method) to 63% (by the proposed method).

A waveguide 2-plane hybrid coupler with two operating bands is proposed. The cross-sectional shape of the coupled region inside the proposed coupler is designed with a two-dimensional arbitrary geometry sorting method. Simulations of the proposed hybrid coupler has a fractional bandwidth (FBW) of 2.17% at the center of 24.99GHz, and at the center of 28.28GHz an FBW of 6.13%. The proposed coupler is analyzed by the mode-matching finite-element hybrid method, and the final result is obtained using a genetic algorithm. The analyzed result of the coupling for the main modes in the coupled region is presented. The design result is confirmed by measurements.