In cognitive radio (CR), superposition cooperative spectrum sensing (SPCSS) is able to offer a much improved sensing reliability compared to individual sensing. Because of the differences in sensing channel condition, the reporting order for each cognitive radio user (CU) will highly affect the sensing performance of the network. In this paper, we propose an algorithm to assign the best reporting order to each CU in order to maximize sensing performance under SPCSS. The numerical results show that the proposed scheme can obtain the same performance as the optimal scheme.

This paper proposes a novel blind adaptive array scheme with subcarrier transmission power assignment (STPA) for spectrum superposing in cognitive radio networks. The Eigenvector Beamspace Adaptive Array (EBAA) is known to be one of the blind adaptive array algorithms that can suppress inter-system interference without any channel state information (CSI). However, EBAA has difficulty in suppressing interference signals whose Signal to Interference power Ratio (SIR) values at the receiver are around 0dB. With the proposed scheme, the ST intentionally provides a level difference between subcarriers. At the receiver side, the 1st eigenvector of EBAA is applied to the received signals of the subcarrier assigned higher power and the 2nd eigenvector is applied to those assigned lower power. In order to improve interference suppression performance, we incorporate Beamspace Constant Modulus Algorithm (BSCMA) into EBAA (E-BSCMA). Additionally, STPA is effective in reducing the interference experienced by the primary system. Computer simulation results show that the proposed scheme can suppress interference signals received with SIR values of around 0dB while improving operational SIR for the primary system. It can enhance the co-existing region of 2 systems that share a spectrum.

Gallium oxide is expected as a channel material for thin film transistors. In the conventional technologies, gallium oxide has been tried to be fabricated by atomic layer deposition (ALD) at high temperatures from 100--450$^{circ}$C, although the room-temperature (RT) growth has not been developed. In this work, we developed the RT ALD of gallium oxide by using a remote plasma technique. We studied trimethylgallium (TMG) adsorption and its oxidization on gallium oxide surfaces at RT by infrared absorption spectroscopy (IRAS). Based on the adsorption and oxidization characteristics, we designed the room temperature ALD of Ga$_{2}$O$_{3}$. The IRAS indicated that TMG adsorbs on the gallium oxide surface by consuming the adsorption sites of surface hydroxyl groups even at RT and the remote plasma-excited water and oxygen vapor is effective in oxidizing the TMG adsorbed surface and regeneration of the adsorption sites for TMG. We successfully prepared Ga$_{2}$O$_{3}$ films on Si substrates at RT with a growth per cycle of 0.055,nm/cycle.

Nitrogen adsorption on thermally cleaned Si(100) surfaces by pure and plasma excited NH$_{3}$ is investigated by extit{in situ} IR absorption spectroscopy and ex-situ X-ray photoelectron spectroscopy with various temperatures from RT (25$^{circ}$C) to 800$^{circ}$C and with a treatment time of 5,min. The nitrogen coverage after the treatment varies according to the treatment temperature for both pure and plasma excited NH$_{3}$. In case of the pure NH$_{3}$, the nitrogen coverage is saturated as low as 0.13--0.25 mono layer (ML) while the growth of the nitride film commenced at 550$^{circ}$C. For the plasma excited NH$_{3}$, the saturation coverage was measured at 0.54,ML at RT and it remained unincreased from RT to 550$^{circ}$C. This indicates that the plasma excited NH$_{3}$ enhances the nitrogen adsorption near at RT. It is found that main species of N is Si$_{2}=$ NH in case of the plasma excited NH$_{3}$ at RT while the pure NH$_{3}$ treatment gives rise to the Si--NH$_{2}$ passivation with Si--H at RT. We discuss the mechanism of the nitrogen adsorption on Si(100) surfaces with the plasma excited NH$_{3}$ in comparison with the study on the pure NH$_{3}$ treatment.

Function speculation design with error recovery mechanisms is quite promising due to its high performance and low area overhead. Previous work has focused on two-stage function speculation and thus lacks a systematic way to address the challenge of the multistage function speculation approach. This paper proposes a multistage function speculation with adaptive predictors and applies it in a novel adder. We deduced the analytical performance and area models for the design and validated them in our experiments. Based on those models, a general methodology is presented to guide design optimization. Both analytical proofs and experimental results on the fabricated chips show that the proposed adder's delay and area have a logarithmic and linear relationship with its bit number, respectively. Compared with the DesignWare IP, the proposed adder provides the same performance with 6-17% area reduction under different bit lengths.

A compact composite right/left-handed transmission-line (CRLH TL) stub resonator is presented. The bandpass frequency of the resonator and the adjacent transmission-zeros are determined by the negative order resonance modes of the stub line. We demonstrate that these resonance frequencies can be arbitrarily controlled by using non-identical, unbalanced unit cells, leading to enhanced loaded-Q as well as unloaded-Q. We show that despite the presence of lumped element loss the unloaded-Q is enhanced by a factor of 2 compared to that of microstrip line as a result of nearly-zero group velocity. As a consequence, the loaded-Q can be increased without incurring significant insertion loss as in the case of conventional stub resonators on the same substrate. The physical mechanisms of the distinct features are discussed based on an equivalent dispersion diagram, a concept introduced to model general one-port CRLH TL used as a stub line.

A four-pixel-array superconducting transition-edge sensor (TES) microcalorimeter with a mushroom-shaped absorber was fabricated for the energy dispersive spectroscopy performed on a transmission electron microscope. The TES consists of a bilayer of Au/Ti with either a 50-nm or 120-nm thickness. The absorber of 5.0,$mu$m thick is made from a Au layer and its stem is deposited in the center of the TES surface. A Ta$_{2}$O$_{5}$ insulating layer of 100-nm thickness is inserted between the overhang region of the absorber and the TES surface. A selected pixel of the TES microcalorimeter was operated for the detection of Np L X-rays emitted from an $^{241}$Am source. A response of the TES microcalorimeter to L X-rays was obtained by analyzing detection signal pulses with using the optimal filter method. An energy resolution was obtained to be 33,eV of the full width at half maximum value at 17.751,keV of Np L$_{eta 1}$ considering its natural width of 13.4,eV. Response to L X-rays emitted from a mixture source of $^{238}$Pu, $^{239}$Pu and $^{241}$Am was obtained by operating the selected pixel of the TES microcalorimeter. Major L X-ray peaks of progeny elements of $alpha$ decay of Pu and Am isotopes were clearly identified in the obtained energy spectrum. The experimental results demonstrated the separation of $^{241}$Am and plutonium isotopes by L X-ray spectroscopy.

Since the birth of astrophysics, astronomers have been using free-space optics to analyze light falling on Earth. In the future however, thanks to the advances in photonics and nanoscience/nanotechnology, much of the manipulation of light might be carried out using not optics but confined waveguides, or circuits, on a chip. This new generation of instruments will be not only extremely compact, but also powerful in performance because the integration enables a greater degree of multiplexing. The benefit is especially profound for space- or air-borne observatories, where size, weight, and mechanical reliability are of top priority. Recently, several groups around the world are trying to integrate ultra-wideband (UWB), low-resolution spectrometers for millimeter-submillimeter waves onto microchips, using superconducting microelectronics. The scope of this Paper is to provide a general introduction and a review of the state-of-the-art of this rapidly advancing field.

In this paper, we propose a 3rd-order nonlinear IIR filter for compensating nonlinear distortions of loudspeaker systems. Nonlinear distortions are common around the lowest resonance frequency for electrodynamic loudspeaker systems. One interesting approach to compensating nonlinear distortions is to employ a mirror filter. The mirror filter is derived from the nonlinear differential equation for loudspeaker systems. The nonlinear parameters of a loudspeaker system, which include the force factor, stiffness, and so forth, depend on the displacement of the diaphragm. The conventional filter structure, which is called the 2nd-order nonlinear IIR filter that originates the mirror filter, cannot reduce nonlinear distortions at high frequencies because it does not take into account the nonlinearity of the self-inductance of loudspeaker systems. To deal with this problem, the proposed filter takes into account the nonlinearity of the self-inductance and has a 3rd-order nonlinear IIR filter structure. Hence, this filter can reduce nonlinear distortions at high frequencies while maintaining a lower computational complexity than that of a Volterra filter-based compensator. Experimental results demonstrate that the proposed filter outperforms the conventional filter by more than 2dB for 2nd-order nonlinear distortions at high frequencies.

Overlapped FFT based energy detection has been proposed as a signal detection scheme in dynamic spectrum access. The overlapped FFT scheme increases the number of FFT frames to reduce the variance of squared noise and improves the detection performance. As the FFT frames are overlapped, correlation values between the frames affect to the detection performance. This paper proposes the window functions which decrease the correlation values between adjacent FFT bins. Numerical results obtained through computer simulation show that novel window functions generated by upsampling a Hamming window improves the detection performance by 0.09. However, this window function suffers more from adjacent channel interference than a conventional window. Therefore, this paper also proposes a two step detection scheme to achieve higher detection performance and to avoid the influence of the adjacent channel signal. Numerical results also indicate that the proposed scheme improves the detection performance and reduces the effect from the adjacent channel signal.

In this paper we describe and experimentally validate a dual-band digital predistortion (DPD) model we propose that takes account of the intermodulation and harmonic distortion produced when the center frequencies of input bands have a harmonic relationship. We also describe and experimentally validate our proposed novel dual-band power amplifier (PA) linearization architecture consisting of a single feedback loop employing a dual-band mixer. Experiment results show that the DPD linearization the proposed model provides can compensate for intermodulation and harmonic distortion in a way that the conventional two-dimensional (2-D) DPD approach cannot. The proposed feedback architecture should make it possible to simplify analog-to-digital converter (ADC) design and eliminate the time lag between different feedback paths.

Introducing pronunciation models into decoding has been proven to be benefit to LVCSR. In this paper, a discriminative pronunciation modeling method is presented, within the framework of the Minimum Phone Error (MPE) training for HMM/GMM. In order to bring the pronunciation models into the MPE training, the auxiliary function is rewritten at word level and decomposes into two parts. One is for co-training the acoustic models, and the other is for discriminatively training the pronunciation models. On Mandarin conversational telephone speech recognition task, compared to the baseline using a canonical lexicon, the discriminative pronunciation models reduced the absolute Character Error Rate (CER) by 0.7% on LDC test set, and with the acoustic model co-training, 0.8% additional CER decrease had been achieved.

Recently, a next-generation heterodyne mixer detector---a hot electron bolometer (HEB) mixer employing a superconducting microbridge---has gradually opened up terahertz-band astronomy. The surrounding state-of-the-art technologies including fabrication processes, 4 K cryostats, cryogenic low-noise amplifiers, local oscillator sources, micromachining techniques, and spectrometers, as well as the HEB mixers, have played a valuable role in the development of super-low-noise heterodyne spectroscopy systems for the terahertz band. The current developmental status of terahertz-band HEB mixer receivers and their applications for spectroscopy and astronomy with ground-based, airborne, and satellite telescopes are presented.

To immobilize cytochrome $c$ (cyt.,$c$) on ITO electrode with keeping its direct electron transfer (DET) activity, 10-carboxydecylphosphonic acid (10-CDPA) self-assembled monolayer (SAM) film was formed on ITO electrode. After 100 times washing process with exchanging phosphate buffer saline solution in the cell to fresh one, extit{in situ} slab optical waveguide (SOWG) absorption spectral measurement proved that about 80% of cyt.,$c$ immobilized on 10-CDPA modified ITO electrode was adsorbed on ITO electrode. Additionally SOWG spectral change of cyt.,$c$ between oxidized and reduced forms was observed with setting the ITO electrode potential at 0.3 and $-$0.3,V vs. Ag/AgCl, respectively showing DET reaction between cyt.,$c$ and ITO electrode occurred. About 30% of a monolayer coverage was estimated from the coulomb amount in the surface area of oxidation and reduction peaks on cyclic voltammetry (CV) data. CV peak current maintained 84% for ITO electrode modified with 10-CDPA SAM film after 60,min continuous scan with 0.1,V/sec from 0.3 and $-$0.3,V vs. Ag/AgCl.

A serial ATA PHY fabricated in a 0.15-µm CMOS process performs the serial ATA operation in an asynchronous transition by using large variation in the reference clock. This technique calibrates a transmission signal frequency by utilizing the received signal. This is achieved by calibrating the divide ratio of a spread-spectrum clock generator (SSCG). This technique enables a serial ATA PHY to use reference oscillators with a production-frequency tolerance of less than 400ppm, i.e., higher than the permissible TX frequency variations (i.e., 350ppm). The calibrated transmission signal achieved a total jitter of 3.9ps.

We report a real time method to monitor the chemical reaction in microdroplets, which contain an organic dye, 5(6)-carboxynaphthofluorescein and a CdSe/ZnS quantum dot using fluorescence spectra. Especially, the relationship between the droplet size and the reaction rate of the two reagents was investigated by changing an injection speed.

The fast multipole method (FMM) for N-body simulations is attracting much attention since it requires minimal communication between computing nodes. We implemented hardware pipelines specialized for the FMM on an FPGA device, the GRAPE-9. An N-body simulation with 1.6×107 particles ran 16 times faster than that on a CPU. Moreover the particle-to-particle stage of the FMM on the GRAPE-9 executed 2.5 times faster than on a GPU in a limited case.

This paper presents a synchronization mechanism to effectively implement the lock and barrier protocols in a decentralized manner through explicit message passing. In the proposed solution, a simple and efficient synchronization control mechanism is proposed to support queued synchronization without contention. By using state-of-the-art Application-Specific Instruction-set Processor (ASIP) technology, we embed the synchronization functionality into a baseline processor, making the proposed mechanism feature ultra-low overhead. Experimental results show the proposed synchronization achieves ultra-low latency and almost ideal scalability when the number of processors increases.

Recently, array speaker products have received attention in the field of consumer electronics, and control technologies for arrayed speaker units, including beamforming and wave field synthesis (WFS), have been developed for various purposes. An important application of these algorithms is focused source reproduction. The focused source reproduction capability is strongly coupled with the array length. The array length is a very important design factor in consumer products, but it is very short in home entertainment systems, compared with ideal WFS systems or theater speaker systems. Therefore, a well-defined measure for the maximum focusing range is necessary for designing an array speaker product. In this paper, a maximum focusable range measure is proposed and is analyzed by simulation of a small array speaker. The analysis results show that the proposed maximum focusable range has properties strongly related to the capability for focused source reproduction.

In this paper, resource-efficient multiple description coding (MDC) multicast is investigated in cognitive radio networks with the consideration of imperfect spectrum sensing and imperfect channel feedback. Our objective is to maximize the system goodput, which is defined as the total successfully received data rate of all multicast users, while guaranteeing the maximum transmit power budget and the maximum average received interference constraint. Owing to the uncertainty of the spectrum state and the non-closed-form expression of the objective function, it is difficult to solve the problem directly. To circumvent this problem, a pretreatment is performed, in which we first estimate the real spectrum state of primary users and then propose a Gaussian approximation for the probability density functions of transmission channel gains to simplify the computation of the objective function. Thereafter, a two-stage resource allocation algorithm is presented to accomplish the subcarrier assignment, the optimal transmit channel gain to interference plus noise ratio (T-CINR) setting, and the transmit power allocation separately. Simulation results show that the proposed scheme is able to offset more than 80% of the performance loss caused by imperfect channel feedback when the feedback error is not high, while keeping the average interference on primary users below the prescribed threshold.