In this letter, we propose an error surface modeling-based segmentalized motion estimation for video coding. We proposed two algorithms previously, one was MBQME [1] and the other is HMBQME [2]. However, these algorithms are not based on locally quadratic MC prediction errors around an integer-pixel motion vector and the hypothesis that the local error plane is a convex function. Therefore, we propose an error surface considered segmentalized modeling algorithm. In this scheme, the tendency of the error surface is first assessed. Using the Sobel operation at the error surface, we classify the error surface region as plain or textured. For plain regions, conventional MBQME is appropriate as the quarter-pixel motion estimation method. For textured regions, we search the additional interpolation points for more accurate modeling. After the interpolation, we perform double precision mathematical modeling so as to find the best motion vector (MV). Experiments show that the proposed scheme has better PSNR performance than conventional modeling algorithms with minimum operation time.

We demonstrated the reduced surface roughness of poly (3-hexylthiophene) (P3HT):(6,6)-phenyl-C61-butyric acid methyl ester (PCBM) thin films with different ratios fabricated by the electrospray deposition (ESD) method. Aggregated structures were observed at the lower voltage, and the uniformity became bad at the higher voltage. Anyway, the minimum root mean square (RMS) roughness was 1.46 nm by optimizing the applied voltage.

We report enhanced photocurrent properties of dye/Au-loaded titanium dioxide (TiO2) films on Au gratings. Au-loaded TiO2 nanopowders were first synthesized by a modified sol-gel method and then prepared by the impregnation method. We also fabricated dye-sensitized solar cells, which were composed of Au grating/Au-TiO2/TMPyP-SCC LbL (20 bilayers)/electrolyte/ITO substrates. Short-circuit photo-current measurements showed that Au-loaded TiO2 with grating-coupled surface plasmon excitation can enhance the short-circuit photocurrentof the fabricated cells.

In the theory of diffraction gratings, the conventional integral method is considered as a powerful tool of numerical analysis. But it fails to work at a critical angle of incidence, because a periodic Green's function (integral kernel) diverges. This problem was resolved by the image integral equation in a previous paper. Newly introducing the reflection extinction theorem, this paper derives the image extinction theorem and the image integral equation. Then, it is concluded that the image integral equation is made up of two physical processes: the image surface radiates a reflected plane wave, whereas the periodic surface radiates the diffracted wave.

This paper deals with a characteristic of the so-called effective boundary condition for a plane wave scattering from periodic surfaces with perfect conductivity. The perturbation solution with all orders is explicitly given under the effective boundary condition. It is newly found that such a perturbation solution satisfies the optical theorem under the exact boundary condition. A comparison between such a perturbation solution and a reference solution for the exact boundary condition by other methods is performed. Then, the validity of such a perturbation solution is concretely discussed.

For the modeling of multipath propagation in every wireless systems, the ray tracing method has been widely studied. However, large errors may result due to the approximation of geometrical optics in curved surfaces. This paper therefore focused on the curved surfaces and edges, which are difficult to handle in ray tracing. Examples of curved surfaces can be found in arched cross-section tunnels which are common in highway networks of mountainous areas. The traditional ray tracing method of dividing the curved surface into smaller flat plates is not so accurate as the size of smaller plates may not satisfy the geometrical optics assumption, and the reflection point which satisfies Fermat's principle may not exist. In this work, a new ray tracing method is proposed with 2 contributions. The first one is the implementation of the reflection coefficient for curved surfaces in ray tracing. The second is applying the physical optics method on the caustics region. To evaluate these methods, path gain simulation results for an arched cross-section model are compared with measurements made inside an arched tunnel. To further improve the simulation results, the effect of rough surface is introduced, and the results are again compared with measurement.

To better understand antenna properties in a narrow space such as in a densely-packed device, a circular microstrip antenna in a narrow parallel-plate waveguide is theoretically studied. An analytical expression is derived for the input impedance in a parallel-plate waveguide by using the cavity model with surface admittance on the side wall. The surface admittance is defined by the external magnetic field due to the equivalent magnetic current at the aperture and takes into account the contribution of the parallel plates to the antenna. The magnetic field external to the antenna, that is in the parallel-plate region, is determined by using a dyadic Green's function. The input impedance is then calculated by a basic definition based on the conservation of the complex power. An analytical expression which couples the resonant frequency and the surface susceptance is also formulated. Presented expressions are validated by comparison with experimental results.

In LDMOS devices for high-voltage applications, there appears a notable fingerprint of current-voltage characteristics known as soft breakdown. Its mechanism is analyzed and modeled on LDMOS devices where a high resistive drift region exists. This analysis has revealed that the softness of breakdown, known as the expansion effect, withholding a run-away of current, is contributed by the flux of holes underneath the gate-overlap region originated by impact-ionization. The mechanism of the expansion effect is modeled and implemented into the compact model HiSIM_HV for circuit simulation. A good agreement between simulated characteristics and 2D-device simulation results is verified.

In this paper, effects of the parasite elements on an antenna impedance of a UHF RFID tag put on a high impedance surface (HIS) are experimentally studied in detail. It is shown that small parasite elements on a mushroom HIS structure can help to recover a mismatch of the impedance and this impedance recovery is brought by an in-phase frequency shift of the HIS due to a mutual coupling between the HIS and the parasite elements. The technique is applied to a commercial 953 MHz band RFID tag inlet antenna on a 53-cell HIS with the total dimension of 125751.5 mm3 and it is demonstrated that the impedance mismatch is successfully recovered and the tag operates with a reading range of 3 m even on a 2003002 mm3 aluminum plate.

This paper proposes an asymptotic method for calculating the received intensity of multi-path millimeter waves transmitted over an undulating surface. This method is a generalization of the asymptotic method that the authors previously derived, based on a quartic phase function approximation, from the physical optics integral expression of the received intensity. The applicability of the previous method is limited to ratios of transmission distance (D) to surface undulation wavelength (λs) of roughly less than 2. This is because the method is based on a quartic phase function approximation. In this paper, this limitation is resolved through this method's generalization, which is achieved by incorporating a technique for calculating the diffraction integral with a higher-degree phase function by using the steepest descent technique with a procedure for systematically identifying the active saddles of the phase function. Numerical examples demonstrate that the proposed asymptotic method can attain calculation accuracy comparable with the physical optics method, even in the case of large D/λs values.

Extracting named entities (NEs) and their relations is more difficult in Thai than in other languages due to several Thai specific characteristics, including no explicit boundaries for words, phrases and sentences; few case markers and modifier clues; high ambiguity in compound words and serial verbs; and flexible word orders. Unlike most previous works which focused on NE relations of specific actions, such as work_for, live_in, located_in, and kill, this paper proposes more general types of NE relations, called predicate-oriented relation (PoR), where an extracted action part (verb) is used as a core component to associate related named entities extracted from Thai Texts. Lacking a practical parser for the Thai language, we present three types of surface features, i.e. punctuation marks (such as token spaces), entity types and the number of entities and then apply five alternative commonly used learning schemes to investigate their performance on predicate-oriented relation extraction. The experimental results show that our approach achieves the F-measure of 97.76%, 99.19%, 95.00% and 93.50% on four different types of predicate-oriented relation (action-location, location-action, action-person and person-action) in crime-related news documents using a data set of 1,736 entity pairs. The effects of NE extraction techniques, feature sets and class unbalance on the performance of relation extraction are explored.

This paper proposes a method for reconstructing a smooth and accurate 3D surface. Recent machine vision techniques can reconstruct accurate 3D points and normals of an object. The reconstructed point cloud is used for generating its 3D surface by surface reconstruction. The more accurate the point cloud, the more correct the surface becomes. For improving the surface, how to integrate the advantages of existing techniques for point reconstruction is proposed. Specifically, robust and dense reconstruction with Shape-from-Silhouettes (SfS) and accurate stereo reconstruction are integrated. Unlike gradual shape shrinking by space carving, our method obtains 3D points by SfS and stereo independently and accepts the correct points reconstructed. Experimental results show the improvement by our method.

This paper deals with an integral method analyzing the diffraction of a transverse electric (TE) wave by a perfectly conductive periodic surface. The conventional integral method fails to work for a critical angle of incidence. To overcome such a drawback, this paper applies the method of image Green's function. We newly obtain an image integral equation for the basic surface current in the TE case. The integral equation is solved numerically for a very rough sinusoidal surface. Then, it is found that a reliable solution can be obtained for any real angle of incidence including a critical angle.

Radiation integral areas are localized and reduced based upon the locality of scattering phenomena. In the high frequency, the scattering field is given by the currents, not the entire region, but on the local areas near the scattering centers, such as the stationary phase points and edge diffraction points, due to the cancelling effect of integrand in the radiation integral. The numerical calculation which this locality is implemented into has been proposed for 2-dimensional problems. The scattering field can be approximated by integrating the currents weighted by the adequate function in the local areas whose size and position are determined appropriately. Fresnel zone was previously introduced as the good criterion to determine the local areas, but the determination method was slightly different, depending on the type of scattering centers. The objective of this paper is to advance the Fresnel zone criteria in a 2-dimensional case to the next stage with enhanced generality and applicability. The Fresnel zone number is applied not directly to the actual surface but to the virtual one associated with the modified surface-normal vector satisfying the reflection law. At the same time, the argument in the weighting function is newly defined by the Fresnel zone number instead of the actual distance from the scattering centers. These two revisions bring about the following three advantages; the uniform treatment of various types scattering centers, the smallest area in the localization and applicability to 3-dimensional problems.

In this paper, we analyze the key factors underlying the implementation, evaluation, and optimization of image processing and computer vision algorithms on embedded GPU using OpenGL ES 2.0 shader model. First, we present the characteristics of the embedded GPU and its inherent advantage when compared to embedded CPU. Additionally, we propose techniques to achieve increased performance with optimized shader design. To show the effectiveness of the proposed techniques, we employ cartoon-style non-photorealistic rendering (NPR), speeded-up robust feature (SURF) detection, and stereo matching as our example algorithms. Performance is evaluated in terms of the execution time and speed-up achieved in comparison with the implementation on embedded CPU.

The cause-and-effect relation between plasmon-resonance absorption and surface wave in a sinusoidal metal grating is investigated. By introducing an equivalent impedance model, similar to an equivalent circuit on an electric circuit, which is an impedance boundary value problem on the fictitious surface over the grating, we estimate the surface wave from the eigen field of the model by using the resonance property of the scattered field. Through numerical examples, we illustrate that the absorption in the grating occurs in the condition of exciting the surface wave along the model, and the real part of the surface impedance is negative on about half part of the fictitious surface in the condition.

In this paper, we propose a novel path tracking control algorithm for an underactuated autonomous underwater vehicle (AUV). The underactuated AUV is controlled by the thrust force and the yaw torque: no sway thruster is used. To deal with this underactuated AUV problem in the path tracking, we introduce an approach angle which makes the AUV converge to the reference path. To design the path tracking controller, we obtain the vehicle's error dynamics in the body-fixed frame, and then design the path tracking controller based on the dynamic surface control (DSC) method. The proposed controller only needs the information of the position and the heading angle of the reference path. Some simulation results demonstrate the effectiveness of the proposed controller.

We investigated optical transmission characteristics of aluminum thin films with periodic hole arrays in sub-wavelength. We divided white light into several color spectra using a color filter based on the surface plasmon resonance (SPR) utilizing aluminum showing high plasma frequency. By optimizing a hole-array period, hole shape, polarization and index difference of two surface, transmittance of 30% and full-width at half-maximum of around 100 nm were achieved.

This paper reviews our recent activities on nanophotonics based on a photonic crystal (PC)/quantum dot (QD)-combined structure for an all-optical device and a metal/semiconductor composite structure using surface plasmon (SP) and negative refractive index material (NIM). The former structure contributes to an ultrafast signal processing component by virtue of new PC design and QD selective-area-growth technologies, while the latter provides a new RGB color filter with a high precision and optical beam-steering device with a wide steering angle.

This paper describes a metasurface designed utilizing either a Frequency Selective Surface (FSS) that has band-pass characteristics or one with band-rejection filtering characteristics in order to clarify the relationship between the filtering characteristics of the FSS and the Perfect Magnetic Conductor (PMC) characteristics of the metasurface. The effects of the filtering characteristics of the FSS on the PMC characteristics of the metasurface are described. Calculation results confirm that a low profile metasurface can be achieved using these FSSs. In addition, the effects of the size of the metasurface on the PMC characteristics of the surface are shown.