In this paper, the dispersion characteristics of magnetostatic surface waves (MSSW) in a nonlinear gyromagnetic medium are analytically investigated. Assuming the nonlinearity as the first order perturbation in permeability tensor of the gyromagnetic medium, the perturbation technique based on the multiple scale method is used to deduce the nonlinear dispersion relations for the MSSW. It is observed that for a given propagation constant of the MSSW the frequency decreases with microwave power. It is also observed that group velocity decreases, and as a consequence, delay time increases with power of the microwave. By evaluating the dependence of frequency on power and variation of group velocity on propagation constant within the accuracy of the perturbation theory, it is confirmed that the conditions for formation of bright soliton are not satisfied for the MSSW.

The problem of electromagnetic scattering by inductive discontinuities located in rectangular waveguides, in particular when dealing with discontinuous conductors of finite thickness, is analyzed using the modified residue-calculus method, and form of the equation suitable for a numerical calculation is derived. The incident wave is taken to be the dominant mode, and reflection and transmission properties of an asymmetric inductive iris are discussed. After the modal representation of the filed, the modal matching is apply to satisfy the boundary conditions at the discontinuity. And using the modified residue-calculus method, simultaneous infinite equations, which are concerned with the scattered mode coefficients, are derived. Then they are approximated at the thick diaphragm. The solutions obtained take on the form of an infinite product, and a numerical solution based on the method of successive approximations is presented as a technique for concretely determining the reflection coefficients. As confirmation, experiments are also carried out in the X-band and close agreement is shown between the calculated and experimental values.

A simple numerical method for calculating paths of creeping rays around an arbitrary convex object is presented. The adventage of this method is that the path of creeping ray is iteratively determined from initial values of incident point and incident direction of the creeping ray without solving differential equation of geodesic path. As the numerical examples, the path of creeping ray on the prolate spheroid and the resonance path of natural modes are shown.

This paper presents a new numerical procedure for solving the scattering wave by the moving surface. Recently, the author and her colleagues have proposed a novel numerical procedure of grid generation having a coordinate line coincident with an arbitrarily shaped moving boundary. The time dependent curvilinear coordinate system which coincides with a contour of moving boundary in a physical region is transformed into fixed rectangular coordinate system. The simple form for the transformation is made possible to choose the function between the physical region and the rectangular computational region. The FD-TD algorithm is exactly solved in this fixed rectangular coordinate system. In this paper, for the application of the FD-TD algorithm to the body fitted grid generation with moving boundary, the stability criterion of FD-TD algorithm for the body fitted grid generation with moving boundary in three dimensions is derived. The stability criterion is shown an upper bound for time step assuring stable numerical solutions. The study of scattering of electromagnetic and acoustic wave from a moving or a rotating body is very important for electromagnetic probing of moving body. The problem has been investigated in the past by numerous authors. One of them is solved by FD-TD method, where the linear interpolation is introduced for the movement. By using the presented transformation technique where time component is added to the grid generation, the time depending coordinate system can be transformed into fixed rectangular coordinate system. Then the problems are directly solved by FD-TD method in the transformed coordinate system. To verify this numemical technique, scattered field is evaluated in the case when a plane wave is normally incident on a moving perfectly conducting flat plate. The numerical results are compared with the exact ones and excellent agreement between them is obtained.

A new type of variable beam splitter at optical frequencies is proposed. The basic structure of the device utilizes a tapered velocity coupler which is composed of a center slab waveguide of constant-thickness, constant-index type and two identical outer slab waveguides of constant-thickness, variable-index type. The coupler is assumed to be fabricated on a LiNbO3 substrate, whith an external electric field applied in parallel with the optical axis. The numerical results obtained with the finite difference method show that a wide range of splitting ratios can be obtained with moderate drive voltages and that the splitting characteristics are stable over a wide range of frequencies.

A new approach of data clustering which is capable of detecting linked or crossed clusters, is proposed. In conventional clustering approaches, it is a hard work to separate linked or crossed clusters if the cluster prototypes are difficult to be represented by a mathematical formula. In this paper, we extract the force information from data points using the concept of psychological potential field, and utilize the information to measure the similarity between data points. Through several experiments, the force shows its effectiveness in diiscriminating different clusters even if they are linked or corssed.

This paper describes a new feature extraction model (Active Model) which is extended from the active contour model (Snakes). Active Model can be applied to various energy minimizing models since it integrates most of the energy terms ever proposed into one model and also provides the new terms for multiple images such as motion and stereo images. The computational order of energy minimization process is estimated in comparison with a dynamic programming method and a greedy algorithm, and it is shown that the energy minimization process in Active Model is faster than the others. Some experimental results are also shown.

Introducing a general statistical model of image noise, we present an optimal algorithm for computing 3-D motion from two views without involving numerical search: () the essential matrix is computed by a scheme called renormalization; () the decomposability condition is optimally imposed on it so that it exactly decomposes into motion parameters; () image feature points are optimally corrected so that they define their 3-D depths. Our scheme not only produces a statistically optimal solution but also evaluates the reliability of the computed motion parameters and reconstructed points in quantitative terms.

This paper presents a modified disparity measurement to recover the depth and a robust method to estimate motion parameters. First, this paper considers phase correspondence for the computation of disparity. It has less computation for disparity than previous methods that use the disparity from correspondence and from correlation. This modified disparity measurement uses the Gabor filter to analyze the local phase property and the exponential filter to analyze the global phase property. These two phases are added to make quasi-linear phases of the stereo image channels which are used for the stereo disparity finding and the structure recovery of scene. Then, we use feature-based correspondence to find the corresponding feature points in temporal image pair. Finally, we combine the depth map and use disparity motion stereo to estimate 3-D motion parameters.

This paper proposes a methodology for fine evaluation of the uncertain behaviors of systems affected by any fluctuation of internal structures and internal parameters, by the use of a new concept on the fuzzy mapping. For a uniformly convex real Banach space X and Y, a fuzzy mapping G is introduced as the operator by which we can define a bounded closed compact fuzzy set G(x,y) for any (x,y)∈X×Y. An original system is represented by a completely continuous operator f defined on X, for instance, in a form xλ(f(x)) by a continuous operator λ: YX. The nondeterministic fluctuations induced into the original system are represented by a generalized form of the fuzzy mapping equation xGβ (x,f(x)) {ζX|µG(x,f(x))(ζ)β}, in order to give a fine evaluation of the solutions with respect to an arbitrarily–specified β–level. By establishing a useful fixed point theorem, the existence and evaluation problems of the "β–level-likely" solutions are discussed for this fuzzy mapping equaion. The theory developed here for the fluctuation problems is applied to the fine estimation of not only the uncertain behaviors of system–fluctuations but also the validity of system–models and -simulations with uncertain properties.

We introduce recurrent networks that are able to learn chaotic maps, and investigate whether the neural models also capture the dynamical invariants (Correlation Dimension, largest Lyapunov exponent) of chaotic time series. We show that the dynamical invariants can be learned already by feedforward neural networks, but that recurrent learning improves the dynamical modeling of the time series. We discover a novel type of overtraining which corresponds to the forgetting of the largest Lyapunov exponent during learning and call this phenomenon dynamical overtraining. Furthermore, we introduce a penalty term that involves a dynamical invariant of the network and avoids dynamical overtraining. As examples we use the Hnon map, the logistic map and a real world chaotic series that correspond to the concentration of one of the chemicals as a function of time in experiments on the Belousov–Zhabotinskii reaction in a well–stirred flow reactor.

We propose two methods to fuse auditory information and visual information for accurate sppech recognition. The first method fuses two kinds of information by using linear combination after calculating two kinds of probabilities by HMM for each word. The second method fuses two kinds of information by using the histogram which expresses the correlation of them. We have performed experiments comparing the proposed methods with the conventional method and confirmed the validity of the proposed methods.

We propose an optimal throughput problem using graph transformations to maximize throughput of a pipelined data path with some loops. The upper bound of the throughput, equals to the lower bound of the iteration interval between the start of two successive iterations, is limited by the length of a critical loop. Therefore we can maximize the throughput by minimizing the length of the critical loop. The proposed method first schedules an initial Data Flow Graph (DFG) under the initial iteration interval as few as it can use resources, then it transforms the DFG into the flow graph with the minimal length of the critical loop by rescheduling the given initial scheduling result. If there are any control steps which violate the resource constraints owing to the transformations, then these operations are adjusted so as to satisfy given resource consrtraints. Finally by rescheduling the transformed DFG, it gives a schedule with maximum throughput. Experiments show the efficiency of our proposed approach.

This paper proposes a new class of unidirectional byte error locating codes, called single symmetric bit error correcting and single unidirectional byte error locating codes, or SEC–SUbEL codes. Here, "byte" denotes a cluster of b bits, where b2. First, the necessary and sufficient conditions of the codes are clarified, and then code construction method is demonstrated. The lower bound on check bit length of the SEC–SUbEL codes is derived. Based on this, the proposed codes are shown to be very efficient in some range of the information length. The code design concept presented for the SEC–SUbEL codes induces the generalized unidirectional byte error locating codes with single symmetric bit error correction capability.

Synchronization has been one of the problems in M–ary spread spectrum communication systems. In this letter, we propose the frame synchronization method using the Hadamard matrix and a frame synchronization method of PCM communication systems. Moreover, we analyze the probabilities of keeping synchronous state and frame renewal rates, and we evaluate the relationship between these probabilities and the number of stages of counters.

We report on an experimental hysteresis in the Hopfield networks and examine the effect of the hysteresis on some important characteristics of the Hopfield networks. The detail mathematic description of the hysteresis phenomenon in the Hopfield networks is given. It suggests that the hysteresis results from fully–connected interconnection of the Hopfield networks and the hysteresis tends to makes the Hopfield networks difficult to reach the global minimum. This paper presents a T–Model network approach to overcoming the hysteresis phenomenon by employing a half–connected interconnection. As a result, there is no hysteresis phenomenon found in the T–Model networks. Theoretical analysis of the T–Model networks is also given. The hysteresis phenomenon in the Hopfield and the T–Model networks is illustrated through experiments and simulations. The experiments agree with the theoretical analysis very well.

This paper presents a cost-effective network for very large ATM cross-connects. In order to develop it, we propose the delta network with expanded middle stages. This proposed network is the intermediate network between a nonblocking network and the delta network with respect to the cost of hardware and internal blocking probability. Using this network, we explore the tradeoff between the cost and internal blocking probability, and derive the optimum configuration under temporarily deviating traffic. Internal blocking occurs when input traffic temporarily deviates from its average value. However, we cannot evaluate the internal blocking probability by using conventional traffic models. In this paper, we adopt temporarily deviating traffic such that all traffic is described as the superposition of the paths which are defined by traffic parameters. As can easily be seen, the path corresponds to virtual path (VP) or virtual channel (VC). Therefore, we believe that our model describes actual traffic more exactly than conventional models do. We show that the optimum configuration is the proposed network whose expansion ratio γ=3 when the maximum number of paths that can be accommodated in one link is greater than 22. This network achieves the internal blocking probability of 10-10. As an example of this network, we show that the proposed network of size 7272 is constructed with only 40% of the hardware required by the nonblocking network.

A new polarization splitter at optical frequencies is proposed. The basic structure of the device is a tapered velocity coupler which is composed of a straight and a dimensionally tapered slab waveguide on a LiNbO3 substrate. The numerical results obtained with the finite difference method indicate that extinction ratios of polarization less than 2% for both TE and TM modes are possible of realization under moderate control voltages and that the splitting characteristics are stable over a wide range of frequencies.

The propagation characteristics of dielectric waveguides with slanted grating structure are analyzed by using the combination of the improved Fourier series expansion method and the approximated multilayer method. The slanted grating region is appoximated by a structure with stratified thin modulated index layers. This method is effective to the guiding problems of the planar slanted grating, because the electromagnetic fields in each layer can be expressed by shifting the phase of the solution in the first layer. In this paper, numerical results are given for the grating with the rectangular and the sinusoidal profile for arbitrary slant angle. The radiation efficiencies for the grating with negative and positive slant angle are also discussed.

A coupled-mode analysis of a symmetric planar nonlinear directional coupler (NLDC) is presented by using a singular perturbation scheme. The effects of linear coupling and nonlinear modification of refractive index are treated to be small perturbations, and the modal fields of isolated linear waveguides are employed as the basis of propagation model. The self-consistent first-order coupled-mode equations governing the transfer of optical power along the NLDC are obtained in analytically closed form. It is shown that tha critical power for optical switching derived from the coupled-mode equations is in close agreement with that obtained by the numerical analysis using the finite difference beam propagation mathod.