This paper presents comprehensive comparisons on the block error rate (BLER) performance of rate-one open-loop (OL) transmit diversity schemes with four antennas for discrete Fourier transform (DFT)-precoded Orthogonal Frequency Division Multiple Access (OFDMA). One candidate scheme employs a quasi-orthogonal (QO) - space-time block code (STBC) in which four-branch minimum mean-square error (MMSE) combining is achieved at the cost of residual inter-code interference (ICI). Another candidate employs a combination of the STBC and selection transmit diversity called time switched transmit diversity (TSTD) (or frequency switched transmit diversity (FSTD)). We apply a turbo frequency domain equalizer (FDE) associated with iterative decision-feedback channel estimation (DFCE) using soft-symbol estimation to reduce channel estimation (CE) error. The turbo FDE includes an ICI canceller to reduce the influence of the residual ICI for the QO-STBC. Based on link-level simulation results, we show that a combination of the STBC and TSTD (or FSTD) is suitable as a four-antenna OL transmit diversity scheme for DFT-precoded OFDMA using the turbo FDE and iterative DFCE.

We present an I/O-size second-order analog to digital converter (ADC) combined with a time-to-digital converter (TDC) and a voltage-to-time converter (VTC). Our proposed VTC is optimized for metal--oxide--metal (MOM) capacitances, and is charged to the MOM capacitances by an input voltage. In a standard 65-nm CMOS process, a signal to noise and distortion ratio (SNDR) of 50,dB (8 bits) is achievable at an input signal frequency of 78,kHz and a sampling rate of 20,MHz, where the respective area and power are 6468,mm$^{mathrm{2}}$ and 509 $mu$W. The measured maximum integral nonlinearity (INL) of the proposed ADC is $-$1.41 LSBs. The active area of the proposed ADC is smaller than an I/O buffer. The proposed ADC is useful as an ADC I/O.

In this paper, we propose a zero-forcing (ZF) Tomlinson-Harashima precoding (THP) with substream permutations based on the bit rate maximization for single-user MIMO (SU-MIMO) systems. We study the effect of substream permutations on the ZF-THP SU-MIMO systems, when the mean squared error (MSE) and the bit rate are adopted for the selection of the permutation matrix as criteria. Based on our analysis, we propose a method to increase the bit rate by substream permutations, and derive QR and Cholesky decomposition-based algorithms which realize the proposed method. Furthermore, to improve the error rate performance, we apply zero transmission to subchannels with low signal-to-noise ratios. Numerical examples are provided to demonstrate the effectiveness of the proposed THP MIMO system.

In this letter, we present an authentication and recovery scheme to protect images. The image blocks are DCT transformed and then encoded with different patterns. An optimal selection is adopted to find the best pattern for each block which results in better image quality. Both the recovery and check data are embedded for data protection. The experimental results demonstrate that our method is able to identify and localize regions having been tampered with. Furthermore, good image quality for both watermarked and recovered images are effectively preserved.

Measurements of 60GHz proximity channels are performed in desktop environments with a digital camera, a laptop PC, a tablet, a smartphone, and a DVD player. The results are characterized by a statistical channel model. All measured channels are found to be similar to conventional exponential decay profiles that have a relatively large first path due to line-of-sight components. We also show that the power difference between the first path and the delay paths is related to randomization of radio wave polarization by internal reflections in the devices, whereas this is conventionally dependent on only a Rice factor. To express this effect, the conventional model is modified by adding one parameter. Computer simulations confirm that RMS delay spreads of the modeled channels are a good fit to measured channels under most conditions.

Cell voltage equalizers are necessary to ensure years of operation and maximize the chargeable/dischargeable energy of series-connected supercapacitors (SCs). A two-switch voltage equalizer using a series-resonant voltage multiplier operating in frequency-multiplied discontinuous conduction mode (DCM) is proposed for series-connected SCs in this paper. The frequency-multiplied mode virtually increases the operation frequency and hence mitigates the negative impact of the impedance mismatch of capacitors on equalization performance, allowing multi-layer ceramic capacitors (MLCCs) to be used instead of bulky and costly tantalum capacitors, the conventional approach when using voltage multipliers in equalizers. Furthermore, the DCM operation inherently provides the constant current characteristic, realizing the excessive current protection that is desirable for SCs, which experience 0V and equivalently become an equivalent short-circuit load. Experimental equalization tests were performed for eight SCs connected in series under two frequency conditions to verify the improved equalization performance at the increased virtual operation frequencies. The standard deviation of cell voltages under the higher-frequency condition was lower than that under the lower-frequency condition, demonstrating superior equalization performance at higher frequencies.

Coordinated multi-point (CoMP) transmission and reception is a promising technique for interference mitigation in cellular systems. The scheduling algorithm for CoMP has a significant impact on the network processing complexity and performance. Performing exhaustive search permits centralized scheduling and thus the optimal global solution; however, it incurs a high level of computational complexity and may be impractical or lead to high cost as well as network instability. In order to provide a more realistic scheduling method while balancing performance and complexity, we propose a low complexity centralized scheduling scheme that adaptively selects users for single-cell transmission or different CoMP scheme transmission to maximize the system weighted sum capacity. We evaluate the computational complexity and system-level simulation performance in this paper. Compared to the optimal scheduling method with exhaustive search, the proposed scheme has a much lower complexity level and achieves near optimal performance.

The capacity maximization of line-of-sight (LoS) two-input and multiple-output (TIMO) channels in indoor environments is investigated in this paper. The 3×2 TIMO channel is mainly studied. First, the capacity fluctuation number (CFN) which reflects the variation of channel capacity is proposed. Then, the expression of the average capacity against the CFN is derived. The CFN is used as a criterion for optimization of the capacity by changing inter-element spacings of transmit and receive antenna arrays. Next, the capacity sensitivity of the 3×2 TIMO channel to the orientation and the frequency variation is studied and compared with those of 2×2 and 4×2 TIMO channels. A small capacity sensitivity of the 3×2 TIMO channel is achieved and verified by both simulation and measurement results. Furthermore, the CFN can also be used as a criterion for optimization of average capacity and the proposed optimization method is validated through numerical results.

Gallium oxide is expected as a channel material for thin film transistors. In the conventional technologies, gallium oxide has been tried to be fabricated by atomic layer deposition (ALD) at high temperatures from 100--450$^{circ}$C, although the room-temperature (RT) growth has not been developed. In this work, we developed the RT ALD of gallium oxide by using a remote plasma technique. We studied trimethylgallium (TMG) adsorption and its oxidization on gallium oxide surfaces at RT by infrared absorption spectroscopy (IRAS). Based on the adsorption and oxidization characteristics, we designed the room temperature ALD of Ga$_{2}$O$_{3}$. The IRAS indicated that TMG adsorbs on the gallium oxide surface by consuming the adsorption sites of surface hydroxyl groups even at RT and the remote plasma-excited water and oxygen vapor is effective in oxidizing the TMG adsorbed surface and regeneration of the adsorption sites for TMG. We successfully prepared Ga$_{2}$O$_{3}$ films on Si substrates at RT with a growth per cycle of 0.055,nm/cycle.

Topic features are useful in improving text summarization. However, independency among topics is a strong restriction on most topic models, and alleviating this restriction can deeply capture text structure. This paper proposes a hybrid topic model to generate multi-document summaries using a combination of the Hidden Topic Markov Model (HTMM), the surface texture model and the topic transition model. Based on the topic transition model, regular topic transition probability is used during generating summary. This approach eliminates the topic independence assumption in the Latent Dirichlet Allocation (LDA) model. Meanwhile, the results of experiments show the advantage of the combination of the three kinds of models. This paper includes alleviating topic independency, and integrating surface texture and shallow semantic in documents to improve summarization. In short, this paper attempts to realize an advanced summarization system.

This letter presents a method to adaptively counter false data injection attacks (FDIAs) in wireless sensor networks, in which a fuzzy rule-based system detects FDIAs and chooses the most appropriate countermeasures. The method does not require en-route verification processes and manual parameter settings. The effectiveness of the method is shown with simulation results.

A 60-GHz CMOS transmitter with on-chip antenna for high-speed short-range wireless interconnections is presented. The radiation gain of the on-chip antenna is doubled using helium-3 ion irradiation technique. The transmitter core is composed of a resistive-feedback RF amplifier, a double-balanced passive mixer, and an injection-locked oscillator. The wideband and power-saving design of the transmitter core guarantees the low-power and high-data-rate characteristic. The transmitter fabricated in a 65-nm CMOS process achieves 5-Gb/s data rate with an EVM performance of $-$12 dB for BPSK modulation at a distance of 1,mm. The whole transmitter consumes 17,mW from a 1.2-V supply and occupies a core area of 0.64,mm$^{2}$ including the on-chip antenna. The gain-enhanced antenna together with the wideband and power-saving design of the transmitter provides a low-power low-cost full on-chip solution for the short-range high-data-rate wireless communication.

Distributed file systems, which manage large amounts of data over multiple commercially available machines, have attracted attention as management and processing systems for Big Data applications. A distributed file system consists of multiple data nodes and provides reliability and availability by holding multiple replicas of data. Due to system failure or maintenance, a data node may be removed from the system, and the data blocks held by the removed data node are lost. If data blocks are missing, the access load of the other data nodes that hold the lost data blocks increases, and as a result, the performance of data processing over the distributed file system decreases. Therefore, replica reconstruction is an important issue to reallocate the missing data blocks to prevent such performance degradation. The Hadoop Distributed File System (HDFS) is a widely used distributed file system. In the HDFS replica reconstruction process, source and destination data nodes for replication are selected randomly. We find that this replica reconstruction scheme is inefficient because data transfer is biased. Therefore, we propose two more effective replica reconstruction schemes that aim to balance the workloads of replication processes. Our proposed replication scheduling strategy assumes that nodes are arranged in a ring, and data blocks are transferred based on this one-directional ring structure to minimize the difference in the amount of transfer data for each node. Based on this strategy, we propose two replica reconstruction schemes: an optimization scheme and a heuristic scheme. We have implemented the proposed schemes in HDFS and evaluate them on an actual HDFS cluster. We also conduct experiments on a large-scale environment by simulation. From the experiments in the actual environment, we confirm that the replica reconstruction throughputs of the proposed schemes show a 45% improvement compared to the HDFS default scheme. We also verify that the heuristic scheme is effective because it shows performance comparable to the optimization scheme. Furthermore, the experimental results on the large-scale simulation environment show that while the optimization scheme is unrealistic because a long time is required to find the optimal solution, the heuristic scheme is very efficient because it can be scalable, and that scheme improved replica reconstruction throughput by up to 25% compared to the default scheme.

Recommendation systems have been widely used in E-commerce sites, social media and etc. An important recommendation task is to predict items that a user will perform actions on with users' historical data, which is called top-K recommendation. Recently, there is huge amount of emerging items which are divided into a variety of categories and researchers have argued or suggested that top-K recommendation of item category could be very beneficial for users to make better and faster decisions. However, the traditional methods encounter some common but crucial problems in this scenario because additional information, such as time, is ignored. The ranking algorithm on graphs and the increasingly growing amount of online user behaviors shed some light on these problems. We propose a construction method of time-aware graphs to use ranking algorithm for personalized recommendation of item category. Experimental results on real-world datasets demonstrate the advantages of our proposed method over competitive baseline algorithms.

Aiming to ease the parallel programming for heterogeneous architectures, we propose and implement a high-level OpenCL runtime that conceptually merges multiple heterogeneous hardware devices into one virtual heterogeneous compute device (VHCD). Moreover, automated workload distribution among the devices is based on offline profiling, together with new programming directives that define the device-independent data access range per work-group. Therefore, an OpenCL program originally written for a single compute device can, after inserting a small number of programming directives, run efficiently on a platform consisting of heterogeneous compute devices. Performance is ensured by introducing the technique of virtual cache management, which minimizes the amount of host-device data transfer. Our new OpenCL runtime is evaluated by a diverse set of OpenCL benchmarks, demonstrating good performance on various configurations of a heterogeneous system.

A robust time synchronization algorithm is proposed for orthogonal frequency division multiplexing (OFDM) based aeronautical mobile airport communication systems (AeroMACS). Using a very sharp timing metric obtained from the preamble, the proposed algorithm shows very robust time synchronization performance for various channel models in an airport. Simulation results show that the proposed algorithm achieves an SNR gain of 2 to 3dB at the failure rate of 10-2 to 10-3 compared with previous algorithms.

Resource Description Framework (RDF) access control suffers from an authorization conflict problem caused by RDF inference. When an access authorization is specified, it can lie in conflict with other access authorizations that have the opposite security sign as a result of RDF inference. In our former study, we analyzed the authorization conflict problem caused by subsumption inference, which is the key inference in RDF. The Rule Interchange Format (RIF) is a Web standard rule language recommended by W3C, and can be combined with RDF data. Therefore, as in RDF inference, an authorization conflict can be caused by RIF inference. In addition, this authorization conflict can arise as a result of the interaction of RIF inference and RDF inference rather than of RIF inference alone. In this paper, we analyze the authorization conflict problem caused by RIF inference and suggest an efficient authorization conflict detection algorithm. The algorithm exploits the graph labeling-based algorithm proposed in our earlier paper. Through experiments, we show that the performance of the graph labeling-based algorithm is outstanding for large RDF data.

Fault localization is essential for conducting effective program repair. However, preliminary studies have shown that existing fault localization approaches do not take the requirements of automatic repair into account, and therefore restrict the repair performance. To address this issue, this paper presents the first study on designing fault localization approaches for automatic program repair, that is, we propose a fault localization approach using failure-related contexts in order to improve automatic program repair. The proposed approach first utilizes program slicing technique to construct a failure-related context, then evaluates the suspiciousness of each element in this context, and finally transfers the result of evaluation to automatic program repair techniques for performing repair on faulty programs. The experimental results demonstrate that the proposed approach is effective to improve automatic repair performance.

In this paper, a novel synchronization method is proposed for a heterogeneous cognitive radio that combines public safety mobile communication systems (PMCSs) with commercial mobile wireless communication systems (CMWCSs). The proposed method enables self-synchronization of the PMCSs as well as co-synchronization of PMCSs and CMWCSs. In this paper, the self-synchronization indicates that each system obtains own timing synchronization. The co-synchronization indicates that a system recognizes data transmitted from other systems correctly. In our research, we especially focus on PMCS self-synchronization because it is one of the most difficult parts of our proposed cognitive radio that improves PMCS's communication quality. The proposed method is utilized for systems employing differentially encoded π/4 shift QPSK modulation. The synchronization can be achieved by correlating envelopes calculated from a PMCS's received signals with subsidiary information (SI) sent via a CMWCS. In this paper, the performance of the proposed synchronization method is evaluated by computer simulation. Moreover, because this SI can also be used to improve the bit error rate (BER) of PMCSs, BER improvement and efficient SI sending methods are derived, after which their performance is evaluated.

TTFF (Time-To-First-Fix) is an important indicator of GPS receiver performance, and must be reduced as much as possible. Bit synchronization is the pre-condition of positioning, which affects TTFF. The frequency error leads to power loss, which makes it difficult to find the bit edge. The conventional bit synchronization methods only work well when there is no or very small frequency error. The bit synchronization process is generally carried out after the pull-in stage, where the carrier loop is already stable. In this paper, a new bit synchronization method based on frequency compensation is proposed. Through compensating the frequency error, the new method reduces the signal power loss caused by the accumulation of coherent integration. The performances of the new method in different frequency error scenarios are compared. The parameters in the proposed method are analyzed and optimized to reduce the computational complexity. Simulation results show that the new method has good performance when the frequency error is less than 25Hz. Test results show that the new method can tolerate dynamic frequency errors, and it is possible to move the bit synchronization to the pull-in process to reduce the TTFF.