In the software testing phase, software reliability growth models (SRGMs) are commonly used to evaluate the reliability of software systems. Traditional SRGMs are restricted by their assumption of a continuous growth pattern for the failure detection rate (FDR) throughout the testing phase. However, the assumption is compromised by Change-Point phenomena, where FDR fluctuations stem from variations in testing personnel or procedural modifications, leading to reduced prediction accuracy and compromised software reliability assessments. Therefore, the objective of this study is to improve software reliability prediction using a novel approach that combines genetic algorithm (GA) and deep learning-based SRGMs to account for the Change-point phenomenon. The proposed approach uses a GA to dynamically combine activation functions from various deep learning-based SRGMs into a new mutated SRGM called MuSRGM. The MuSRGM captures the advantages of both concave and S-shaped SRGMs and is better suited to capture the change-point phenomenon during testing and more accurately reflect actual testing situations. Additionally, failure data is treated as a time series and analyzed using a combination of Long Short-Term Memory (LSTM) and Attention mechanisms. To assess the performance of MuSRGM, we conducted experiments on three distinct failure datasets. The results indicate that MuSRGM outperformed the baseline method, exhibiting low prediction error (MSE) on all three datasets. Furthermore, MuSRGM demonstrated remarkable generalization ability on these datasets, remaining unaffected by uneven data distribution. Therefore, MuSRGM represents a highly promising advanced solution that can provide increased accuracy and applicability for software reliability assessment during the testing phase.

Low capacity and reliability are the challenges in the development of ionosphere communication channel systems. To overcome this problem, one promising and state-of-the-art method is applying a multi-carrier modulation technique. Currently, the use of multi-carrier modulation technique is using a single transmission frequency with a bandwidth is no more than 24 kHz in real-world implementation. However, based on the range of the minimum and maximum ionospheric plasma frequency values, which could be in the MHz range, the use of these values as the main bandwidth in multi-carrier modulation techniques can optimize the use of available channel capacity. In this paper, we propose a multi-carrier modulation technique in combination with a model variation of Lowest Usable Frequency (LUF) and Maximum Usable Frequency (MUF) values as the main bandwidth to optimize the use of available channel capacity while also maintaining its reliability by following the variation of the ionosphere plasma frequency. To analyze its capacity and reliability, we performed a numeric simulation using a LUF-MUF model based on Long Short Term-Memory (LSTM) and Advanced Stand Alone Prediction System (ASAPS) in Near Vertical Incidence Skywave (NVIS) propagation mode with the assumption of perfect synchronization between transmitter and receiver with no Doppler and no time offsets. The results show the achievement of the ergodic channel capacity varies for every hour of the day, with values in the range of 10 Mbps and 100 Mbps with 0 to 20 dB SNR. Meanwhile, the reliability of the system is in the range of 8% to 100% for every hour of one day based on two different Mode Reliability calculation scenarios. The results also show that channel capacity and system reliability optimization are determined by the accuracy of the LUF-MUF model.

Memory-based Programmable Logic Device (MPLD) is a new type of reconfigurable device constructed using a general SRAM array in a unique interconnect configuration. This research aims to propose approaches to guarantee the long-term reliability of MPLDs, including a test method to identify interconnect defects in the SRAM array during the production phase and a delay monitoring technique to detect aging-caused failures. The proposed test method configures pre-generated test configuration data into SRAMs to create fault propagation paths, applies an external walking-zero/one vector to excite faults, and identifies faults at the external output ports. The proposed delay monitoring method configures a novel ring oscillator logic design into MPLD to measure delay variations when the device is in practical use. The logic simulation results with fault injection confirm the effectiveness of the proposed methods.

Physical Unclonable Function (PUF) is a promising lightweight hardware security primitive that can extract device fingerprints for encryption or authentication. However, extracting fingerprints from either the chip or the board individually has security flaws and cannot provide hardware system-level security. This paper proposes a new Chip-PCB hybrid PUF(CPR PUF) in which Weak PUF on PCB is combined with Strong PUF inside the chip to generate massive responses under the control of challenges of on-chip Strong PUF. This structure tightly couples the chip and PCB into an inseparable and unclonable unit thus can verify the authenticity of chip as well as the board. To improve the uniformity and reliability of Chip-PCB hybrid PUF, we propose a lightweight key generator based on a reliability self-test and debiasing algorithm to extract massive stable and secure keys from unreliable and biased PUF responses, which eliminates expensive error correction processes. The FPGA-based test results show that the PUF responses after robust extraction and debiasing achieve high uniqueness, reliability, uniformity and anti-counterfeiting features. Moreover, the key generator greatly reduces the execution cost and the bit error rate of the keys is less than 10-9, the overall security of the key is also improved by eliminating the entropy leakage of helper data.

This paper proposes a layer-wise tunable retraining method for edge FeFET Computation-in-Memory (CiM) to compensate the accuracy degradation of neural network (NN) by FeFET device errors. The proposed retraining can tune the number of layers to be retrained to reduce inference accuracy degradation by errors that occur after retraining. Weights of the original NN model, accurately trained in cloud data center, are written into edge FeFET CiM. The written weights are changed by FeFET device errors in the field. By partially retraining the written NN model, the proposed method combines the error-affected layers of NN model with the retrained layers. The inference accuracy is thus recovered. After retraining, the retrained layers are re-written to CiM and affected by device errors again. In the evaluation, at first, the recovery capability of NN model by partial retraining is analyzed. Then the inference accuracy after re-writing is evaluated. Recovery capability is evaluated with non-volatile memory (NVM) typical errors: normal distribution, uniform shift, and bit-inversion. For all types of errors, more than 50% of the degraded percentage of inference accuracy is recovered by retraining only the final fully-connected (FC) layer of Resnet-32. To simulate FeFET Local-Multiply and Global-accumulate (LM-GA) CiM, recovery capability is also evaluated with FeFET errors modeled based on FeFET measurements. Retraining only FC layer achieves recovery rate of up to 53%, 66%, and 72% for FeFET write variation, read-disturb, and data-retention, respectively. In addition, just adding two more retraining layers improves recovery rate by 20-30%. In order to tune the number of retraining layers, inference accuracy after re-writing is evaluated by simulating the errors that occur after retraining. When NVM typical errors are injected, it is optimal to retrain FC layer and 3-6 convolution layers of Resnet-32. The optimal number of layers can be increased or decreased depending on the balance between the size of errors before retraining and errors after retraining.

This study proposes a heterogeneous integration of precise and approximate storage in data center storage. The storage control engine allocates precise and error-tolerant applications to precise and approximate storage, respectively. The appropriate use of both precise and approximate storage is examined by applying a non-volatile memory capacity algorithm. To respond to the changes in application over time, the non-volatile memory capacity algorithm changes capacity of storage class memories (SCMs), namely the memory-type SCM (M-SCM) and storage-type SCM (S-SCM), in non-volatile memory resource. A three-dimensional triple-level cell (TLC) NAND flash is used as a large capacity memory. The results indicate that precise storage exhibits a high performance when the maximum storage cost is high. By contrast, with a low maximum storage cost, approximate storage exhibits high performance using a low bit cost approximate multiple-level cell (MLC) S-SCM.

In the field of reliability engineering, many studies on the relationship of reliability between components and the entire system have been conducted since the 1960s. Various properties of large-scale systems can be studied by limit theorems. In addition, the limit theorem can provide an approximate system reliability. Existing studies have established the limit theorems of a connected-(r, s)-out-of-(m, n):F lattice system consisting of components with the same reliability. However, the existing limit theorems are constrained in terms of (a) the system shape and (b) the condition under which the theorem can be applied. Therefore, this study generalizes the existing limit theorems along the two aforementioned directions. The limit theorem established in this paper can be useful for revealing the properties of the reliability of a large-scale connected-(r, s)-out-of-(m, n):F lattice system.

The Proof of Stake (PoS) protocol is one of the consensus algorithms for blockchain, in which the integrity of a new block is validated according to voting by nodes called validators. However, due to validator-oriented voting, voting results are likely to be false when the number of validators with wrong votes increases. In the PoS protocol, validators are motivated to vote correctly by reward and penalty mechanisms. With such mechanisms, validators who contribute to correct consensuses are rewarded, while those who vote incorrectly are penalized. In this paper, we consider an incentivization mechanism based on the voting profile of a validator, which is estimated from the voting history of the validator. In this mechanism, the stake collected due to the penalties are redistributed to validators who vote correctly, improving the incentive of validators to contribute to the system. We evaluate the performance of the proposed mechanism by computer simulations, investigating the impacts of system parameters on the estimation accuracy of the validator profile and the amount of validator's stake. Numerical results show that the proposed mechanism can estimate the voting profile of a validator accurately even when the voting profile dynamically changes. It is also shown that the proposed mechanism gives more reward to validators who vote correctly with high voting profile.

Leveraging on Network Function Virtualization (NFV) and Software Defined Networking (SDN), network slicing (NS) is recognized as a key technology that enables the 5G Infrastructure Provider (InP) to support diversified vertical services over a shared common physical infrastructure. 5G end-to-end (E2E) NS is a logical virtual network that spans across the 5G network. Existing works on improving the reliability of the 5G mainly focus on reliable wireless communications, on the other hand, the reliability of an NS also refers to the ability of the NS system to provide continued service. Hence, in this work, we focus on enhancing the reliability of the NS to cope with physical network node failures, and we investigate the NS deployment problem to improve the reliability of the system represented by the NS. The reliability of an NS is enhanced by two means: firstly, by considering the topology information of an NS, critical virtual nodes are backed up to allow failure recovery; secondly, the embedding of the augmented NS virtual network is optimized for failure avoidance. We formulate the embedding of the augmented virtual network (AVN) to maximize the survivability of the NS system as the survivable AVN embedding (S-AVNE) problem through an Integer Linear Program (ILP) formulation. Due to the complexity of the problem, a heuristic algorithm is introduced. Finally, we conduct intensive simulations to evaluate the performance of our algorithm with regard to improving the reliability of the NS system.

Fifth generation mobile communication system (5G) mobile operators need to explore new use cases and/or applications together with vertical industries, the industries which are potential users of 5G, in order to fully exploit the new 5G capabilities in terms of its application. Vehicular communications for platooning are considered to be one of new use cases of 5G whose low-latency and ultra-reliability are required. This paper presents our field evaluations on latency and reliability performance of 5G V2V Direct communication towards application to truck platooning. The authors build a field experimental environment, for V2X communications of truck platooning, with actual large-size trucks and a prototype system employing 5G New Radio (NR) technologies, and performed some field experiments in rural areas. In this paper, we introduce the 5G NR-V2X prototype system. Its most distinctive feature is that the prototype system is equipped with V2V Direct communication radio interface (i.e., sidelink), in addition to the traditional radio interfaces between BS and UE (i.e., downlink and uplink). Then, we present the field evaluation results of radio propagation environment results and over-the-air transmission performance of latency and reliability characteristics on the V2V Direct communication of the prototype in real public express highway environment including tunnel area as well as tunnel outside area, in order to assess 5G NR-V2X system applying to truck platooning. The radio propagation and the latency performance evaluation results clarify that the latency performance is degraded due to Hybrid Automatic Repeat reQuest (HARQ) retransmission at the outside of tunnel more possibly than the inside of tunnel, since larger path loss values can be observed at the outside of tunnel than the inside of tunnel, in V2V Direct communications of truck platooning. The over-the-air latency and reliability evaluation results confirm that it is important to set an appropriate maximum number of HARQ retransmissions since there is a trade-off problem in order to realize low latency and high reliability simultaneously.

With the development of the IEEE 802.11 standard for wireless LANs, there has been an enormous increase in the usage of wireless LANs in factories, plants, and other industrial environments. In industrial applications, wireless LAN systems require high reliability for stable real-time communications. In this paper, we propose a multi-access-point (AP) diversity method that contributes to the realization of robust data transmissions toward realization of ultra-reliable low-latency communications (URLLC) in wireless LANs. The proposed method can obtain a diversity effect of multipaths with independent transmission errors and collisions without modification of the IEEE 802.11 standard or increasing overhead of communication resources. We evaluate the effects of the proposed method by numerical analysis, develop a prototype to demonstrate its feasibility, and perform experiments using the prototype in a factory wireless environment. These numerical evaluations and experiments show that the proposed method increases reliability and decreases transmission delay.

This paper reports the results of a new test on what types of failure cause falls in the stock prices of telecommunication service providers. This analysis of stock price is complementary to our previous one on market share. A clear result of our new test is that the type of failure causing falls in stock price is different from the type causing decline in market share. Specifically, the previous study identified frequent failures as causes of decline in market share, while the current study indicates large failures affecting many users as causes of falls in stock price. Together, these analyses give important information for reliability designs of telecommunications networks.

In this paper, we explore the physical layer security of an Internet of Things (IoT) network comprised of multiple relay-user pairs in the presence of multiple malicious eavesdroppers and channel estimation error (CEE). In order to guarantee secure transmission with channel estimation error, we propose a channel estimation error oriented joint relay-user pair and friendly jammer selection (CEE-JRUPaFJS) scheme to improve the physical layer security of IoT networks. For the purpose of comparison, the channel estimation error oriented traditional round-robin (CEE-TRR) scheme and the channel estimation error oriented traditional pure relay-user pair selection (CEE-TPRUPS) scheme are considered as benchmark schemes. The exact closed-form expressions of outage probability (OP) and intercept probability (IP) for the CEE-TRR and CEE-TPRUPS schemes as well as the CEE-JRUPaFJS scheme are derived over Rayleigh fading channels, which are employed to characterize network reliability and security, respectively. Moreover, the security-reliability tradeoff (SRT) is analyzed as a metric to evaluate the tradeoff performance of CEE-JRUPaFJS scheme. It is verified that the proposed CEE-JRUPaFJS scheme is superior to both the CEE-TRR and CEE-TPRUPS schemes in terms of SRT, which demonstrates our proposed CEE-JRUPaFJS scheme are capable of improving the security and reliability performance of IoT networks in the face of multiple eavesdroppers. Moreover, as the number of relay-user pairs increases, CEE-TPRUPS and CEE-JRUPaFJS schemes offer significant increases in SRT. Conversely, with an increasing number of eavesdroppers, the SRT of all these three schemes become worse.

In a network topology design problem, it is important to analyze the reliability and construction cost of complex network systems. This paper addresses a topological optimization problem of minimizing the total cost of a network system with separate subsystems under a reliability constraint. To solve this problem, we develop three algorithms. The first algorithm finds an exact solution. The second one finds an exact solution, specialized for a system with identical subsystems. The third one is a heuristic algorithm, which finds an approximate solution when a network system has several identical subsystems. We also conduct numerical experiments and demonstrate the efficacy and efficiency of the developed algorithms.

We propose a new framework named ROICF based on reinforcement learning orienting reliable compilation optimization sequence generation. On the foundation of the LLVM standard compilation optimization passes, we can obtain specific effective phase ordering for different programs to improve program reliability.

Silica-LiNbO3 (LN) hybrid modulators have a hybrid configuration of versatile passive silica-based planar lightwave circuits (PLCs) and simple LN phase modulators arrays. By combining the advantages the two components, these hybrid modulators offer large-scale, highly-functionality modulators with low losses for advanced modulation formats. However, the reliability evaluation necessary to implement them in real transmissions has not been reported yet. In terms of reliability characteristics, there are issues originating from the difference in thermal expansion coefficients between silica PLC and LN. To resolve these issues, we propose design guidelines for hybrid modulators to mitigate the degradation induced by the thermal expansion difference. We fabricated several tens of silica-LN dual polarization quadrature phase shift keying (DP-QPSK) modulators based on the design guidelines and evaluated their reliability. The experiment results show that the modules have no degradation after a reliability test based on GR-468, which confirms the validity of the design guidelines for highly reliable silica-LN hybrid modulators. We can apply the guidelines for hybrid modules that realize heterogeneous device integration using materials with different coefficients of thermal expansion.

Communication networks are now an essential infrastructure of society. Many services are constructed across multiple network domains. Therefore, the reliability of multi-domain networks should be evaluated to assess the sustainability of our society, but there is no known method for evaluating it. One reason is the high computation complexity; i.e., network reliability evaluation is known to be #P-complete, which has prevented the reliability evaluation of multi-domain networks. The other reason is intra-domain privacy; i.e., network providers never disclose the internal data required for reliability evaluation. This paper proposes a novel method that computes the lower and upper bounds of reliability in a distributed manner without requiring privacy disclosure. Our method is solidly based on graph theory, and is supported by a simple protocol that secures intra-domain privacy. Experiments on real datasets show that our method can successfully compute the reliability for 14-domain networks in one second. The reliability is bounded with reasonable errors; e.g., bound gaps are less than 0.1% for reliable networks.

For the RF power amplifier, its exposed input and output are susceptible to damage from Electrostatic (ESD) damage. The bi-direction protection is required at the input in push-pull operating mode. In this paper, considering the process compatibility to the power amplifier, cascaded Grounded-gate NMOS (ggNMOS) and Polysilicon diodes (PDIO) are stacked together to form an ESD clamp with forward and reverse protection. Through Transmission line pulse (TLP) and CV measurements, the clamp is demonstrated as latch-up immune and low parasitic capacitance bi-direction ESD protection, with 18.67/17.34V holding voltage (Vhold), 4.6/3.2kV ESD protection voltage (VESD), 0.401/0.415pF parasitic capacitance (CESD) on forward and reverse direction, respectively.

In this paper, we investigate a novel joint multi-relay and jammer selection (JMRJS) scheme in order to improve the physical layer security of wireless networks. In the JMRJS scheme, all the relays succeeding in source decoding are selected to assist in the source signal transmission and meanwhile, all the remaining relay nodes are employed to act as friendly jammers to disturb the eavesdroppers by broadcasting artificial noise. Based on the more general Nakagami-m fading channel, we analyze the security performance of the JMRJS scheme for protecting the source signal against eavesdropping. The exact closed-form expressions of outage probability (OP) and intercept probability (IP) for the JMRJS scheme over Nakagami-m fading channel are derived. Moreover, we analyze the security-reliability tradeoff (SRT) of this scheme. Simulation results show that as the number of decode-and-forward (DF)relay nodes increases, the SRT of the JMRJS scheme improves notably. And when the transmit power is below a certain value, the SRT of the JMRJS scheme consistently outperforms the joint single-relay and jammer selection (JSRJS) scheme and joint equal-relay and jammer selection (JERJS) scheme respectively. In addition, the SRT of this scheme is always better than that of the multi-relay selection (MRS) scheme.

The distinctive characteristics of unmanned aerial vehicle networks (UAVNs), including highly dynamic network topology, high mobility, and open-air wireless environments, may make UAVNs vulnerable to attacks and threats. Due to the special security requirements, researching in the high reliability of the power and communication network in drone monitoring system become special important. The reliability of the communication network and power in the drone monitoring system has been studied. In order to assess the reliability of the system power supply in the drone emergency monitoring system, the accelerated life tests under constant stress were presented based on the exponential distribution. Through a comparative analysis of lots of factors, the temperature was chosen as the constant accelerated stress parameter. With regard to the data statistical analysis, the type-I censoring sample method was put forward. The mathematical model of the drone monitoring power supply was established and the average life expectancy curve was obtained under different temperatures through the analysis of experimental data. The results demonstrated that the mathematical model and the average life expectancy curve were fit for the actual very well. With overall consideration of the communication network topology structure and network capacity the improved EED-SDP method was put forward in drone monitoring. It is concluded that reliability analysis of power and communication network in drone monitoring system is remarkably important to improve the reliability of drone monitoring system.