In this paper, user set selection in the allocation sequences of round-robin (RR) scheduling for distributed antenna transmission with block diagonalization (BD) pre-coding is proposed. In prior research, the initial phase selection of user equipment allocation sequences in RR scheduling has been investigated. The performance of the proposed RR scheduling is inferior to that of proportional fair (PF) scheduling under severe intra-cell interference. In this paper, the multi-input multi-output technology with BD pre-coding is applied. Furthermore, the user equipment (UE) sets in the allocation sequences are eliminated with reinforcement learning. After the modification of a RR allocation sequence, no estimated throughput calculation for UE set selection is required. Numerical results obtained through computer simulation show that the maximum selection, one of the criteria for initial phase selection, outperforms the weighted PF scheduling in a restricted realm in terms of the computational complexity, fairness, and throughput.

This study proposes a low-complexity permittivity estimation for ground penetrating radar applications based on a contrast source inversion (CSI) approach, assuming multilayered ground media. The homogeneity assumption for each background layer is used to address the ill-posed condition while maintaining accuracy for permittivity reconstruction, significantly reducing the number of unknowns. Using an appropriate initial guess for each layer, the post-CSI approach also provides the dielectric profile of a buried object. The finite difference time domain numerical tests show that the proposed approach significantly enhances reconstruction accuracy for buried objects compared with the traditional CSI approach.

With the network function virtualization technology, a middlebox can be deployed as software on commercial servers rather than on dedicated physical servers. A backup server is necessary to ensure the normal operation of the middlebox. The workload can affect the failure rate of backup server; the impact of workload-dependent failure rate on backup server allocation considering unavailability has not been extensively studied. This paper proposes a shared backup allocation model of middlebox with consideration of the workload-dependent failure rate of backup server. Backup resources on a backup server can be assigned to multiple functions. We observe that a function has four possible states and analyze the state transitions within the system. Through the queuing approach, we compute the probability of each function being available or unavailable for a certain assignment, and obtain the unavailability of each function. The proposed model is designed to find an assignment that minimizes the maximum unavailability among functions. We develop a simulated annealing algorithm to solve this problem. We evaluate and compare the performances of proposed and baseline models under different experimental conditions. Based on the results, we observe that, compared to the baseline model, the proposed model reduces the maximum unavailability by an average of 29% in our examined cases.

Mobile edge computing (MEC) technology guarantees the privacy and security of large-scale data in the Narrowband-IoT (NB-IoT) by deploying MEC servers near base stations to provide sufficient computing, storage, and data processing capacity to meet the delay and energy consumption requirements of NB-IoT terminal equipment. For the NB-IoT MEC system, this paper proposes a resource allocation algorithm based on deep reinforcement learning to optimize the total cost of task offloading and execution. Since the formulated problem is a mixed-integer non-linear programming (MINLP), we cast our problem as a multi-agent distributed deep reinforcement learning (DRL) problem and address it using dueling Q-learning network algorithm. Simulation results show that compared with the deep Q-learning network and the all-local cost and all-offload cost algorithms, the proposed algorithm can effectively guarantee the success rates of task offloading and execution. In addition, when the execution task volume is 200KBit, the total system cost of the proposed algorithm can be reduced by at least 1.3%, and when the execution task volume is 600KBit, the total cost of system execution tasks can be reduced by 16.7% at most.

We propose a biometric identification system where the chosen- and generated-secret keys are used simultaneously, and investigate its fundamental limits from information theoretic perspectives. The system consists of two phases: enrollment and identification phases. In the enrollment phase, for each user, the encoder uses a secret key, which is chosen independently, and the biometric identifier to generate another secret key and a helper data. In the identification phase, observing the biometric sequence of the identified user, the decoder estimates index, chosen- and generated-secret keys of the identified user based on the helper data stored in the system database. In this study, the capacity region of such system is characterized. In the problem settings, we allow chosen- and generated-secret keys to be correlated. As a result, by permitting the correlation of the two secret keys, the sum rate of the identification, chosen- and generated-secret key rates can achieve a larger value compared to the case where the keys do not correlate. Moreover, the minimum amount of the storage rate changes in accordance with both the identification and chosen-secret key rates, but that of the privacy-leakage rate depends only on the identification rate.

We propose an open source cell library characterizer. Recently, free and open-sourced silicon design communities are attracted by hobby designers, academies and industries. These open-sourced silicon designs are supported by free and open sourced EDAs, however, in our knowledge, tool-chain lacks cell library characterizer to use original standard cells into digital circuit design. This paper proposes an open source cell library characterizer which can generate timing models and power models of standard cell library.

Crowdsensing-based spectrum detection (CSD) is promising to enable full-coverage radio resource availability for the increasingly connected machines in the Internet of Things (IoT) networks. The current CSD scheme consumes a lot of energy and network resources for local sensing, processing, and distributed data reporting for each crowdsensing device. Furthermore, when the amount of reported data is large, the data fusion implemented at the requestor can easily cause high latency. For improving efficiencies in both energy and network resources, this paper proposes a green CSD (GCSD) paradigm. The ambient backscatter (AmB) is used to enable a battery-free mode of operation in which the received spectrum data is reported directly through backscattering without local processing. The energy for backscattering can be provided by ambient radio frequency (RF) sources. Then, relying on air computation (AirComp), the data fusion can be implemented during the backscattering process and over the air by utilizing the summation property of wireless channel. This paper illustrates the model and the implementation process of the GCSD paradigm. Closed-form expressions of detection metrics are derived for the proposed GCSD. Simulation results verify the correctness of the theoretical derivation and demonstrate the green properties of the GCSD paradigm.

Local (private) 5G system can provide a secure and flexible network using the cellular-based technologies at their facilities (e.g., factories, agricultural lands, and buildings). We constructed a small-scale demonstration system that exhibits the remote control of a patrol and work robot with arms using a local 5G system. The constructed robot comprises a robot operating system-based unmanned ground vehicle, two laser range finders, a webcam, an omnidirectional camera, and a six-axis robot arm. To fabricate a demonstration system with open-source software, we assessed the one-way delay of video streaming by changing different CPU, camera types, drivers, applications, and video resolutions. According to the assessment findings, it was demonstrated that it is possible to realize approximately 100ms delay under the limited resolution condition, and the allowable maximum absolute delay of 300ms can be attained even for full HD (1920 × 1080) resolution of this demonstration. Furthermore, local 5G was demonstrated to reduce delay variations to the same level as wired systems. It was also clarified that the increase in delay due to the application of local 5G is relatively small (5-25% in total delay) in this demonstration. Finally, we employed the small-scale demonstration system for the online and onsite campus tours for high school students.

This brief presents A 16/32Gb/s dual-mode transmitter including a linearity calibration loop to maintain amplitude linearity of the SST driver. Linearity detection and corresponding master-slave power supply circuits are designed to implement the proposed architecture. The proposed transmitter is manufactured in a 22nm FD-SOI process. The linearity calibration loop reduces the peak INL errors of the transmitter by 50%, and the RLM rises from 92.4% to 98.5% when the transmitter is in PAM4 mode. The chip area of the transmitter is 0.067mm2, while the proposed linearity enhanced part is 0.05×0.02mm2 and the total power consumption is 64.6mW with a 1.1V power supply. The linearity calibration loop can be detached from the circuit without consuming extra power.

Machine-to-Machine (M2M) communication plays a pivotal role in the evolution of Internet of Things (IoT). Cellular networks are considered to be a key enabler for M2M communications, which are originally designed mainly for Human-to-Human (H2H) communications. The introduction of M2M users will cause a series of problems to traditional H2H users, i.e., interference between various traffic. Resource allocation is an effective solution to these problems. In this paper, we consider a shared resource block (RB) and power allocation in an H2H/M2M coexistence scenario, where M2M users are subdivided into delay-tolerant and delay-sensitive types. We first model the RB-power allocation problem as maximization of capacity under Quality-of-Service (QoS) constraints of different types of traffic. Then, a learning framework is introduced, wherein a complex agent is built from simpler subagents, which provides the basis for distributed deployment scheme. Further, we proposed distributed Q-learning based autonomous RB-power allocation algorithm (DQ-ARPA), which enables the machine type network gateways (MTCG) as agents to learn the wireless environment and choose the RB-power autonomously to maximize M2M pairs' capacity while ensuring the QoS requirements of critical services. Simulation results indicates that with an appropriate reward design, our proposed scheme succeeds in reducing the impact of delay-tolerant machine type users on critical services in terms of SINR thresholds and outage ratios.

Although end-to-end based speech recognition research for Mandarin-English code-switching has attracted increasing interests, it remains challenging due to data scarcity. Meta-learning approach is popular with low-resource modeling using high-resource data, but it does not make full use of low-resource code-switching data. Therefore we propose a two-fold cross-validation training framework combined with meta-learning approach. Experiments on the SEAME corpus demonstrate the effects of our method.

The application of compressed sensing (CS) theory to non-orthogonal multiple access (NOMA) systems has been investigated recently. As described in this paper, we propose a quality-of-service (QoS)-aware, low-complexity, CS-based user selection and power allocation scheme with adaptive resource block selection for downlink NOMA systems, where the tolerable interference threshold is designed mathematically to achieve a given QoS requirement by being relaxed to a constrained l1 norm optimization problem. The proposed scheme adopts two adaptive resource block (RB) selection algorithms that assign proper RB to user pairs, i.e. max-min channel assignment and two-step opportunistic channel assignment. Simulation results show that the proposed scheme is more effective at improving the user rate than other reference schemes while reducing the required complexity. The QoS requirement is approximately satisfied as long as the required QoS value is feasible.

Deployment of machine-type communications (MTCs) over the current cellular network could lead to severe overloading of the radio access network of Long Term Evolution (LTE)-based systems. This paper proposes a slotted access-based solution, called the Slotted Access For Group Paging (SAFGP), to cope with the paging-induced MTC traffic. The proposed SAFGP splits paged devices into multiple access groups, and each group is then allocated separate radio resources on the LTE's Physical Random Access Channel (PRACH) in a periodic manner during the paging interval. To support the proposed scheme, a new adaptive barring algorithm is proposed to stabilize the number of successful devices in each dedicated access slot. The objective is to let as few devices transmitting preambles in an access slot as possible while ensuring that the number of preambles selected by exactly one device approximates the maximum number of uplink grants that can be allocated by the eNB for an access slot. Analysis and simulation results demonstrate that, given the same amount of time-frequency resources, the proposed method significantly improves the access success and resource utilization rates at the cost of slightly increasing the access delay compared to state-of-the-art methods.

This paper describes a method to evaluate the modulated waveforms output by a high-speed external phase modulator over a wide wavelength range by using linear optical sampling (LOS) and a wavelength-swept light source. The phase-modulated waveform is sampled by LOS together with the reference signal before modulation, and the modulation waveform is observed by removing the phase noise of the light source extracted from the reference signal. In this process, the frequency offset caused by the optical-path length difference between the measurement and reference interferometers is removed by digital signal processing. A pseudo-random binary-sequence modulated signal is observed with a temporal resolution of 10ps. We obtained a dynamic range of ∼40dB for the measurement bandwidth of 10 nm. When the measurement bandwidth is expanded to entire C-Band (∼35nm), the dynamic ranges of 37∼46dB were observed, depending on the wavelengths. The measurement time was sub-seconds throughout the experiment.

To alleviate the problem of the dependency on the quantity of the training sample data in speech emotion recognition, a weighted gradient pre-train algorithm for low-resource speech emotion recognition is proposed. Multiple public emotion corpora are used for pre-training to generate shared hidden layer (SHL) parameters with the generalization ability. The parameters are used to initialize the downsteam network of the recognition task for the low-resource dataset, thereby improving the recognition performance on low-resource emotion corpora. However, the emotion categories are different among the public corpora, and the number of samples varies greatly, which will increase the difficulty of joint training on multiple emotion datasets. To this end, a weighted gradient (WG) algorithm is proposed to enable the shared layer to learn the generalized representation of different datasets without affecting the priority of the emotion recognition on each corpus. Experiments show that the accuracy is improved by using CASIA, IEMOCAP, and eNTERFACE as the known datasets to pre-train the emotion models of GEMEP, and the performance could be improved further by combining WG with gradient reversal layer.

This paper proposes two accurate source-number estimation methods for array antennas and multi-input multi-output radar. Direction of arrival (DOA) estimation is important in high-speed wireless communication and radar imaging. Most representative DOA estimation methods require the source-number information in advance and often fail to estimate DOAs in severe environments such as those having low signal-to-noise ratio or large transmission-power difference. Received signals are often bandlimited or narrowband signals, so the proposed methods first involves denoising preprocessing by removing undesired components then comparing the original and denoised signal information. The performances of the proposed methods were evaluated through computer simulations.

In this study, we aim to improve the performance of audio source separation for monaural mixture signals. For monaural audio source separation, semisupervised nonnegative matrix factorization (SNMF) can achieve higher separation performance by employing small supervised signals. In particular, penalized SNMF (PSNMF) with orthogonality penalty is an effective method. PSNMF forces two basis matrices for target and nontarget sources to be orthogonal to each other and improves the separation accuracy. However, the conventional orthogonality penalty is based on an inner product and does not affect the estimation of the basis matrix properly because of the scale indeterminacy between the basis and activation matrices in NMF. To cope with this problem, a new PSNMF with cosine similarity between the basis matrices is proposed. The experimental comparison shows the efficacy of the proposed cosine similarity penalty in supervised audio source separation.

Software developers may write a number of similar source code fragments including the same mistake in software products. To remove such faulty code fragments, developers inspect code clones if they found a bug in their code. While various code clone detection methods have been proposed to identify clones of either code blocks or functions, those tools do not always fit the code inspection task because a faulty code fragment may be much smaller than code blocks, e.g. a single line of code. To enable developers to search code clones of such a small faulty code fragment in a large-scale software product, we propose a method using Lempel-Ziv Jaccard Distance, which is an approximation of Normalized Compression Distance. We conducted an experiment using an existing research dataset and a user survey in a company. The result shows our method efficiently reports cloned faulty code fragments and the performance is acceptable for software developers.

In response to fast charging systems, Silicon Carbide (SiC) power semiconductor devices are of great interest of the automotive power electronics applications as the next generation of fast charging systems require high voltage batteries. For high voltage battery EVs (Electric Vehicles) over 800V, SiC power semiconductor devices are suitable for 3-phase inverters, battery chargers, and isolated DC-DC converters due to their high voltage rating and high efficiency performance. However, SiC-MOSFETs have two characteristics that interfere with high-speed switching and high efficiency performance operations for SiC MOS-FET applications in automotive power electronics systems. One characteristic is the low voltage rating of the gate-source terminal, and the other is the large internal gate-resistance of SiC MOS-FET. The purpose of this work was to evaluate a proposed hybrid gate drive circuit that could ignore the internal gate-resistance and maintain the gate-source terminal stability of the SiC-MOSFET applications. It has been found that the proposed hybrid gate drive circuit can achieve faster and lower loss switching performance than conventional gate drive circuits by using the current source gate drive characteristics. In addition, the proposed gate drive circuit can use the voltage source gate drive characteristics to protect the gate-source terminals despite the low voltage rating of the SiC MOS-FET gate-source terminals.

To achieve smooth beam injection in operation of synchrotron radiation facilities, pulsed multipole magnet beam injectors are developed. It is found that the developed beam injector causes serious disturbance in the circulating storage beam in the Aichi synchrotron radiation center, and that such the unexpected disturbance of the storage beam may be caused by eddy current induced on thin titanium coating inside a beam duct. In this work, the induced eddy current on the titanium layer is evaluated quantitatively by numerical simulations and improvement for the developed beam injector is discussed based on the numerical simulation.