User privacy preservation is critical to prevent many sophisticated attacks that are based on the user's server access patterns and ID-related information. We propose a password-based user authentication scheme that provides strong privacy protection using one-time credentials. It eliminates the possibility of tracing a user's authentication history and hides the user's ID and password even from servers. In addition, it is resistant against user impersonation even if both a server's verification database and a user's smart card storage are disclosed. We also provide a revocation scheme for a user to promptly invalidate the user's credentials on a server when the user's smart card is compromised. The schemes use lightweight operations only such as computing hashes and bitwise XORs.

The aim of this study is to develop a new whole-body averaged specific absorption rate (SAR) estimation method based on the external-cylindrical field scanning technique. This technique is adopted with the goal of simplifying the dosimetry estimation of human phantoms that have different postures or sizes. An experimental scaled model system is constructed. In order to examine the validity of the proposed method for realistic human models, we discuss the pros and cons of measurements and numerical analyses based on the finite-difference time-domain (FDTD) method. We consider the anatomical European human phantoms and plane-wave in the 2 GHz mobile phone frequency band. The measured whole-body averaged SAR results obtained by the proposed method are compared with the results of the FDTD analyses.

We propose a randomness test based on the T-complexity of a sequence, which can be calculated using a parsing algorithm called T-decomposition. Recently, the Lempel-Ziv (LZ) randomness test based on LZ-complexity using the LZ78 incremental parsing was officially excluded from the NIST test suite in NIST SP 800-22. This is caused from the problem that the distribution of P-values for random sequences of length 106 is strictly discrete for the LZ-complexity. Our proposed test can overcome this problem because T-complexity has almost ideal continuous distribution of P-values for random sequences of length 106. We also devise a new sequential T-decomposition algorithm using forward parsing, while the original T-decomposition is an off-line algorithm using backward parsing. Our proposed test can become a supplement to NIST SP 800-22 because it can detect several undesirable pseudo-random numbers that the NIST test suite almost fails to detect.

In a differential transmission line, a large common-mode radiation is excited due to its asymmetry. In this paper, the imbalance difference model, which was proposed by the authors for estimation of common-mode radiation, is extended to apply to the differential signaling systems. The authors focus on a differential transmission line with asymmetric property, which consists of an adjacent return plane and two signal lines which are placed close to an edge of the return plane. Three orthogonal transmission modes, a normal mode, a primary common mode and a secondary common mode, are defined. Among these transmission modes, the secondary common mode is dominant in radiation, and a mechanism of the secondary common-mode generation is explained. The radiated emission which was calculated using the imbalance difference model was in good agreement with that obtained by full wave calculation.

Generic image recognition techniques are widely studied for automatic image indexing. However, many of these methods are computationally too heavy for a practically large setup. Thus, for realizing scalability, it is important to properly balance the trade-off between performance and computational cost. In recent years, methods based on a bag-of-keypoints approach have been successful and widely used. However, the preprocessing cost for building visual words becomes immense in large-scale datasets. On the other hand, methods based on global image features have been used for a long time. Because global image features can be extracted rapidly, it is relatively easy to use them with large datasets. However, the performance of global feature methods is usually poor compared to the bag-of-keypoints methods. This paper proposes a simple but powerful scheme of boosting the performance of global image features by densely sampling low-level statistical moments of local features. Also, we use a scalable learning and classification method which is substantially lighter than a SVM. Our method achieved performance comparable to state-of-the-art methods despite its remarkable simplicity.

This paper shows experimental results of packet error rates (PERs) in wireless-LAN mounted printed circuit boards and gives a discussion on a mechanism of electromagnetic noise coupling that affects the PER. We utilized the amplitude probability distribution to investigate the noise coupling channel. We measured the magnetic near-field distribution to obtain information about noise sources. Based on measurement results, we also performed parallel plate resonance analysis to find out electromagnetic interference antennas. We confirmed that noise radiates from a power supply system of a digital circuit and its coupling to a receiving antenna causes an increase of the PER.

Multi-dimensional (MD) periodic complementary array sets (CASs) with impulse-like MD periodic autocorrelation function are naturally generalized to (one dimensional) periodic complementary sequence sets, and such array sets are widely applied to communication, radar, sonar, coded aperture imaging, and so forth. In this letter, based on multi-dimensional perfect arrays (MD PAs), a method for constructing MD periodic CASs is presented, which is carried out by sampling MD PAs. It is particularly worth mentioning that the numbers and sizes of sub-arrays in the proposed MD periodic CASs can be freely changed within the range of possibilities. In particular, for arbitrarily given positive integers M and L, two-dimensional periodic polyphase CASs with the number M2 and size L L of sub-arrays can be produced by the proposed method. And analogously, pseudo-random MD periodic CASs can be given when pseudo-random MD arrays are sampled. Finally, the proposed method's validity is made sure by a given example.

In this paper, an evaluation method for electromagnetic wave absorber with anisotropic reflection properties is discussed. Anisotropic absorber panels have an axis of anisotropy (principal axis). In order to specify the principal axis, the evaluation method based on the diagonalization of reflection coefficient matrix is used. Also, the permittivity of absorber materials is considered.

Micro-gap electrostatic discharge (ESD) events due to a human with charge voltages below 1000 V cause serious malfunctions in high-tech information devices. For clarifying such a mechanism, it is indispensable to grasp the spark process of such micro-gap ESDs. For this purpose, two types of spark-resistance laws proposed by Rompe-Weizel and Toepler have often been used, which were derived from the hypotheses that spark conductivity be proportional to the internal energies and charges injected into a spark channel, respectively. However, their validity has not well been verified. To examine which spark-resistance formula could be applied for micro-gap ESDs, with a 12-GHz digital oscilloscope, we previously measured the discharge currents through the hand-held metal piece from a charged human with respect to charged voltages of 200 V and 2000 V, and thereby derived the conductance of a spark gap to reveal that both of their hypotheses are roughly valid in the initial stage of sparks. In this study, to further verify the above spark hypotheses, we derived the discharge voltages in closed forms across a spark gap based on the above spark-resistance formulae, and investigated which spark-resistance formula could be applied for micro-gap ESDs in comparison of spark gaps estimated from the measured discharge currents. As a result, we found that Rompe-Weizel's formula could well explain spark properties for micro-gap ESDs than Toepler's one regardless of charge voltages and approach speeds.

An inter-modulation distortion (IMD) compensation method for thermal memory effect using a multistage RC-ladder circuit has been proposed. The IMD caused by the thermal memory effect on an InGaP/GaAs HBT amplifier was compensated for by inserting a multistage RC-ladder circuit in the base bias circuit of the amplifier. Since heat flux owing to self-heating in the transistor can be approximated with a multistage thermal RC-ladder circuit, the canceling of IMD by an additional electrical memory effect generated from the RC-ladder circuit is predicted. The memory effects cause asymmetrical characteristics between upper and lower IMD. The IMD caused by the memory effects is expressed as a vector sum of each origin. By adjusting an electrical reactance characteristic for sub-harmonics affected by the thermal memory effect in the amplifier circuit, the asymmetric characteristic is symmetrized. The parameters of the RC-ladder circuit were estimated so that the adjusted electrical reactance characteristic is reproduced in simulation. A fabricated InGaP/GaAs HBT amplifier with the thermal memory effect compensation circuit exhibited a symmetrized and suppressed IMD characteristics.

This paper treats a band-broadening design technique of a dual-band branch-line coupler with matching networks composed of an impedance step and a short-circuited stub based on the equivalent admittance approach. By replacing each right-handed transmission line (RH-TL) with a composite right/left-handed transmission line (CRLH-TL), very flat couplings over a relative bandwidth of about 10% can be obtained at two arbitrary operating frequencies in comparison with previous CRLH-TLs branch-line couplers. Furthermore, by adding periodical open-circuited stubs into RH-TLs of the designed CRLH-TLs branch-line coupler with matching networks, the entire size of the coupler can be reduced to about 50%. Verification of these band-broadening and size-reduction design techniques can be also shown by an electromagnetic simulation and experiment.

Orthogonal frequency division multiplexing (OFDM) signals have high peak-to-average power ratio (PAPR) and cause large nonlinear distortions in power amplifiers (PAs). Memory effects in PAs also become no longer ignorable for the wide bandwidth of OFDM signals. Digital baseband predistorter is a highly efficient technique to compensate the nonlinear distortions. But it usually has many parameters and takes long time to converge. This paper presents a novel predistorter design using a set of orthogonal polynomials to increase the convergence speed and the compensation quality. Because OFDM signals are approximately complex Gaussian distributed, the complex Hermite polynomials which have a closed-form expression can be used as a set of orthogonal polynomials for OFDM signals. A differential envelope model is adopted in the predistorter design to compensate nonlinear PAs with memory effects. This model is superior to other predistorter models in parameter number to calculate. We inspect the proposed predistorter performance by using an OFDM signal referred to the IEEE 802.11a WLAN standard. Simulation results show that the proposed predistorter is efficient in compensating memory PAs. It is also demonstrated that the proposal acquires a faster convergence speed and a better compensation effect than conventional predistorters.

A method to realize the fine frequency-tuning steps using tiny capacitors instead of Metal-Insulator-Metal (MIM) capacitors is proposed for a digitally controlled oscillator (DCO). The tiny capacitors are realized by the coplanar transmission lines which are arranged unsymmetrical in a 6 metal layers (M6) foundry of 0.18 µm CMOS technology. These transmission line based capacitors are designed by using electro-magnetic field simulator, and co-designed by using SPICE simulator. Finally, these capacitors are employed to design 15 bit DCO and fabricated the proposed DCO in 0.18 µm CMOS technology, and tested. The measured phase noise of DCO was -118.3 dBc/Hz (@1 MHz offset frequency), and the oscillating frequency tuned from 4.86 GHz to 5.36 GHz in the minimum frequency-tuning step of 18 kHz.

The use of image contrast enhancement has become increasingly essential due to the need to better show the visual information contained within the image for all vision-based systems. This has lead to motivation for the design of a powerful and accurate automatic contrast enhancement for a digital image. Histogram equalization is the most commonly used contrast enhancement method. However, the conventional histogram equalization methods usually result in excessive contrast enhancement, which causes the unnatural look and visual artifacts of the processed image. In this paper, we propose a novel histogram equalization method using the automatic histogram separation along with the piecewise transformed function. The contrast enhancement results of the proposed method were not only analyzed through qualitative visual inspection and for quantitative accuracy, but are also compared to the results of other state-of-the-art methods.

Error-propagation is an important issue and should be carefully coped with in the decision-feedback equalizers (DFE). Ignoring the impact of error-propagation often leads to impractical laboratory results. In this paper, we investigate two novel layered space-frequency equalizers (LSFE) for single-carrier multiple-input multiple-output (MIMO) systems, where the recently proposed frequency-domain equalizer with time domain noise-predictor (FDE-NP) is adopted at each stage of the LSFE. We first derive the partially-connected LSFE with noise predictor (PC-LSFE-NP) which has exactly the same mean square error (MSE) as the conventional LSFE under the assumption of perfect feedback. However, if error-propagation is considered, the proposed PC-LSFE-NP can achieve better performance than the conventional LSFE due to the more reliable feedback output by the decoders. To reduce the interference from the not yet detected layers in the feedback section, we then introduce the fully-connected LSFE with noise predictor (FC-LSFE-NP), in which all layers are implicitly equalized within each stage and their decisions fed back internally. The powerful feedback filter of FC-LSFE-NP brings significant performance superiority over the conventional LSFE and PC-LSFE-NP with either perfect or imperfect feedback. Moreover, we propose a simple soft-demapper for the equalizers to avoid information loss during decoding, and thus, further improve the performance. Finally, we compare the performance of (PC/FC)-LSFE-NP with the existing schemes by computer simulations.

In order to determine exposure compliance with the electromagnetic fields from a base station's antenna in the far-field region, we should calculate the spatially averaged field value in a defined space. This value is calculated based on the measured value obtained at several points within the restricted space. According to the ICNIRP guidelines, at each point in the space, the reference levels are averaged over any 6 min (from 100 kHz to 10 GHz) for the general public. Therefore, the more points we use, the longer the measurement time becomes. For practical application, it is very advantageous to spend less time for measurement. In this paper, we analyzed the difference of average values between 6 min and lesser periods and compared it with the standard uncertainty for measurement drift. Based on the standard deviation from the 6 min averaging value, the proposed minimum averaging time is 1 min.

The construction of EM absorber and frequency selective shielding has been investigated by using two dimensional metal fiber array (MFA) composites. The MFA composite shows a resonant type frequency dispersion in the complex relative permittivity spectra (εr = εr' - jεr") having a negative εr' region. The frequency characteristics of the conventional ferrite-rubber EM absorber can be improved by combining with the negative permittivity property of the MFA composite. A frequency selective shielding can be achieved by the evanescent EM wave propagation in the layered MFA composite structure.

The present paper focuses on the application of the base station cooperation (BSC) technique in fractional frequency reuse (FFR) networks. Fractional frequency reuse is considered to be a promising scheme for avoiding the inter-cell interference problem in OFDMA cellular systems, such as WiMAX, in which the edge mobile stations (MSs) of adjacent cells use different subchannels for separate transmission. However, the problem of FFR is that the cell edge spectral efficiency (SE) is much lower than that of the cell center. The BSC technique, in which adjacent BSs perform cooperative transmission for one cell edge MS with the same channel, may improve the cell edge SE. However, since more BSs transmit signals for one cell edge MS, the use of BSC can also increase the inter-cell interference, which might degrade the network performance. In this paper, with a focus on this tradeoff, we propose an adaptive BSC scheme in which BSC is only performed for the cell edge MSs that can achieve a significant capacity increase with only a slight increase in inter-cell interference. Moreover, a channel reallocation scheme is proposed in order to further improve the performance of the adaptive BSC scheme. The simulation results reveal that, compared to the conventional FFR scheme, the proposed schemes are effective for improving the performance of FFR networks.

Virtual Private Network (VPN) is a cost effective method to provide integrated multimedia services. Usually heterogeneous multimedia data can be categorized into different types according to the required Quality of Service (QoS). Therefore, VPN should support the prioritization among different services. In order to support multiple types of services with different QoS requirements, efficient bandwidth management algorithms are important issues. In this paper, I employ the Kalai-Smorodinsky Bargaining Solution (KSBS) for the development of an adaptive bandwidth adjustment algorithm. In addition, to effectively manage the bandwidth in VPNs, the proposed control paradigm is realized in a dynamic online approach, which is practical for real network operations. The simulations show that the proposed scheme can significantly improve the system performances.

We propose a novel technique of matching at both ends of the guard trace to suppress resonance. This approach is derived from the viewpoint that the guard trace acts as a transmission line. We examined that matched termination suppresses guard-trace resonance through simulating a circuit and measuring radiation. We found from these results that the proposed method enables guard-trace voltages to remain low and hence avoids increases in radiation. In addition, we demonstrated that "matched termination at the far end of the guard trace" could suppress guard-trace resonance sufficiently at all frequencies. We eventually found that at least two vias at both ends of the guard trace and only one matching resistor at the far end could suppress guard-trace resonance. With respect to fewer vias, the method we propose has the advantage of reducing restrictions in the printed circuit board layout at the design stage.