An efficient full–wave spectral domain moment method is developed to compute the current distribution and the radiation associated with microstrip discontinuities. Two techniques are used to increase the efficiency of the method of moments algorithm so that a transmission line of moderate electrical size can be analyzed in reasonable time.

An emitter–coupled pair with a dynamic bias current and a source–coupled pair with a dynamic bias current are proposed as an exponential–law element and a square–law element that operate as a floating bipolar junction transistor (BJT) and a floating MOS field–effect transistor (MOSFET). In bipolar technology, a hyperbolic sine function circuit and a hyperbolic cosine function circuit are easily obtained by subtracting and summing the output currents of two symmetrical exponential–law elements with positive and negative input signals. In the same manner, an operational transconductance amplifier (OTA) and a squaring circuit are obtained by subtracting and summing the output currents of two symmetrical square-law elements with positive and negative input signals in CMOS technology. The proposed OTA and squaring circuit possess the widest input voltage range ever reported.

Customers' requirements for telecommunications services have been changing from simple point-to-point and single-medium communications to multiple-point and multiple-media, as well as changes in bandwidth requirements. In addition, customers' end stations (ES) will not be homogeneous, from POTS-like terminal to sophisticated multimedia workstation that handles various kind of media. This paper discusses communications management architectures that provide multimedia multipoint communications in a heterogeneous ESs environment. It summarizes existing communications management architectures, and discusses advanced architectures that provide multimedia communications, multipoint communications and heterogeneity handling capabilities in a flexible and efficient manner. The objectives of this architecture are to integrate multimedia multipoint communications capabilities into the network, and provide customers with versatile communications service request interface which can handle from plain single-medium point-to-point communications to multimedia multipoint communications. This paper especially focuses on the management functionalities for multimedia multipoint service fabrics (MMSF) which may be owned by the network provider, the third-party service provider, or the customer. It discusses variations of MMSF management protocol implementations in the case that the MMSF is owned by either of the three. It also discusses implementation of customers' various operations requests to the MMSF in the communication phase.

This paper describes a new feature extraction model (Active Model) which is extended from the active contour model (Snakes). Active Model can be applied to various energy minimizing models since it integrates most of the energy terms ever proposed into one model and also provides the new terms for multiple images such as motion and stereo images. The computational order of energy minimization process is estimated in comparison with a dynamic programming method and a greedy algorithm, and it is shown that the energy minimization process in Active Model is faster than the others. Some experimental results are also shown.

A new approach using radiation mode expansions is presented for calculating radiated fields from arbitrary distribution of electromagnetic sources in the half space region partitioned by a dielectric layer with a ground conductor. This method is applied to the calculation of radiation from microstrip-type antennas with a dielectric substrate of theoretically infinite extent. To be able to use this method, it is necessary to obtain first the field distribution around antenna patches, which is accomplished rather easily by using the FD-TD method. Radiation pattern calculations are presented for a rectangular patch antenna to verify the feasibility of this approach.

An active contour model which is called Snakes was proposed to extract the border line of an object from an image. This method presents the minimization problem of the energy function defined on the contour curve. The authors obtained an excellent result by applying genetic algorithm to the contour extraction. In this paper, the biphased genetic algorithm, which is a new type of genetic algorithm, is proposed to minimize the energy function of Snakes. The parameters of the genetic algorithm are examined to tune up its local and global search abilities. The biphased genetic algorithm composed of two phases of genetic search is constructed to use both abilities of the exploration and the exploitation properties of the genetic algorithm. The processing results of the biphased genetic algorithm are compared with those of the previous methods, and the advantages of the proposed algorithm are shown by several experiments.

The methodology for latchup-free design in bipolar and PMOS merged gates, so-called BiPMOS gates, is considered. Although BiPMOS gates can provide higher switching characteristics than conventional, individually drawn, BiCMOS gates even when the supply voltage is reduced, the general methodology to prevent latchup has been lacking. This paper presents an approximate, but sufficiently correct, mathematical technique to solve the Laplace equation, which gives the distribution of latchup trigger current for the given BiPMOS drawings. It is shown that the resistances of the collector plug and the spreading resistance under the base-collector junction greatly influence latchup, and that the well-emitter overlapping space becomes a problem in the case of a single collector. The distribution of latchup triggering current for the double-emitter double collector NPN transistor indicates the optimum position of the source diffusion area.

This paper presents a novel and successful logic synthesis method for optimizing ternary logic functions of any given number of input variables. A new optimization algorithm to synthesize and minimize an arbitrary ternary logic function of n-input variables can always lead this function to optimal or very close to optimal solution, where [n (n1)/2]1 searches are necessary to achieve the optimal solution. Therefore, the complexity number of this algorithm has been greatly reduced from O(3n) into O(n2). The advantages of this synthesis and optimization algorithm are: (1) Very easy logic synthesis method. (2) Algorithm complexity is O(n2). (3) Optimal solution can be obtained in very short time. (4) The method can solve the interconnection problems (interconnection delay) of VLSI and ULSI processors, where very fast and parallel operations can be achieved. A transformation method between operational and polynomial domains of ternary logic functions of n-input variables is also discussed. This transformation method is very effective and simple. Design of the circuits of GF(3) operators, addition and multiplication mod-3, have been proposed, where these circuits are composed of Josephson junction devices. The simulation results of these circuits and examples show the following advantages: very good performances, very low power consumption, and ultra high speed switching operation.

ISO and ITU-T have developed the standard concept of the Telecommunications Management Network (TMN). This standard does not, however, specify interface implementation. The user requires an Application Programming Interface (API) that bridges user application and the TMN concept to construct a TMN-based application. This paper proposes an object oriented API (OOAPI) that is suitable for TMN-based operations system implementation. OOAPI is one interface of the Common Management Information Service Element (CMISE), and uses the Common Management Information Protocol (CMIP). OOAPI is composed of two C++ programming language constructs: Data Object and Interface object "M_User". The Data Object makes it easier for the user to access management information. The M_User provides a connection-less CMISE interface because the OOAPI handles CMIP association automatically. The M_User also provides MO location-transparency by using the OSI Directory Service. This paper compares the existing MO location-transparency schemes with the OOAPI method, and clarifies the advantages of OOAPI. This paper also indicates results from OOAPI trials, and confirms that OOAPI has sufficient performance to implement highly effective TMN operations system.

Creating a bandwidth abundant B-ISDN requires the further development of path technologies. Optical path cross-connect nodes (OXCs) will be required that offer very high levels of expandability. The present limited traffic demands must be efficiently supported while permitting easy step-wise expansion in capacity. This paper proposes two OXC architectures that offer high modularity with regard to incoming/outgoing links or the number of multiplexed wavelengths in each link. This paper briefly reviews, for optical path realization, the wavelength path (WP) and the virtual wavelength path (VWP) techniques. The proposed OXC architectures provide flexibility and minimum investment to encourage introduction but support incremental network growth and investment to match traffic demand. The architectures make it easy to upgrade a WP network to a VWP network, simply by replacing some optical components. It is also shown that the proposed OXC architectures ensure effective optical signal detection after a long-haul optical fiber transmission because they minimizes signal power losses within the OXC. Therefore, the proposed OXC architecture can be applied to global area networks. The proposed OXC architectures will play a key role in realizing the optical path infrastructure for the future bandwidth abundant B-ISDN.

This paper describes a trial coaxial surface mounted connector for PGA-type high-speed multichip modules (MCM). An MCM connector is needed to ensure testability and connection reliability of MCMs mounted on a printed circuit board. Our connector consists of a coaxial elements, a common ground housing made of conductive resin, and a ground contact spring plate. It has 68 signal contacts. We investigated the performance of this connector by experiment and simulation. Its insertion force is only about 53 gf per signal pin. The characteristic impedance is from 45.6 Ω to 61.4 Ω. The average resistance between two contacts is 28 mΩ with a deviation of less than plus or minus 5 mΩ. The insertion is -0.4 dB at 1.0 GHz. Crosstalk noise is less than 1.2%. This prototype connector can transmit pulses of up to 1.2 Gb/s, showing that it is applicable to high-speed MCMs.

Different signature codes in an optical code division multiple access (CDMA) network have been known to demonstrate different performances. The performance of different signature codes in an optical CDMA network was analyzed here in this paper by including the performance evaluation for the synchronization process which was not considered previously. Both auto- and cross-correlation properties of the signature codes were found to be important. In addition, the performance comparison of (n, w1, 1, 1), (n, w2, 2, 1) optical orthogonal codes (OOC's), and (n, w3, w3, 1) extended prime code demonstrated that an (n, w2, 2, 1) OOC could accommodate more users than the other two.

Experimental optical gain characteristics of an erbium-doped fiber amplifier have not been explained well by conventional laser schemes in the case of two-channel amplification. Modified simple laser schemes including cross relaxation among degenerate levels were valid for the explanation of the optical gain dependence on input signal power and on the erbium-doped fiber length.

This paper proposes an adaptive modulation/TDMA scheme to achieve high capacity personal multi-media communication systems. TDMA is employed to cope with various bit rate for multi-media services. The modulation scheme is selected from 1/4-rate QPSK, 1/2-rate QPSK, QPSK, 16QAM and 64QAM according to the received C/IC (power ratio of the desired signal to the co-channel interference) and the delay spread. The spectral efficiency is evaluated by using the simulated bit error rate (BER) performance as well as the cumulative distribution of the C/IC with parameters of cell configurations. The results show that the spectral efficiency of the proposed scheme is 3.5 times higher than that of the conventional QPSK systems at the outage probability of 10%, and the effect is more remarkable at lower outage probability. The results also show that the proposed adaptive modulation is effective in improving delay spread immunity.

Kumar and Billinton have presented a new technique for obtaining the steady-state probabilities from a flow graph based on Markov model. By examining the graph and choosing suitable input and output nodes, the steady-state probabilities can be obtained directly by using the flow graph. In this paper this graphical technique is applied for a k-out-of-n: G repairable system. Consequently a new derivation way of the formulae for the steady-state availability and MTBF is obtained.

Exact analytical solutions for the steady-state transmission and reflection characteristics of a nonlinear Fabry-Perot resonator applicable to bistable optical devices are derived. The resonator consists of a Kerr-like nonlinear film sandwiched by reflection mirrors made of a quarter-wave dielectric stack. An equivalent mirrorless model has been introduced to facilitate the analysis. For both positive and negative nonlinear coefficients, the rigorous solutions have been simply expressed in terms of Jacobian elliptic functions.

In this paper, a fault model for multiple-valued programmable logic arrays (MV-PLAs) is proposed and the equivalences of faults of MV-PLA's are discussed. In a supposed multiple-valued NOR/TSUM PLA model, it is shown that multiple-valued stuck-at faults, multiple-valued bridging faults, multiple-valued threshold shift faults and other some faults in a literal generator circuit are equivalent or subequivalent to a multiple crosspoint fault in the NOR plane or a multiple fault of weights in the TSUM plane. These results lead the fact that multiple-valued test vector set which indicates all multiple crosspoint fault and all multiple fault of weights also detects above equivalent or subequivalent faults in a MV-PLA.

We report the development of high-performance small-scale AlGaAs/GaAs collector-up heterojunction bipolar transistors (C-up HBT) with a carbon (C)-doped base layer. Oxygen-ion (O+) implantation is used to define their intrinsic emitter/base junctions and zinc (Zn)-diffusion is used to lower the resistivity of their O+-implanted extrinsic base layers. The highly resistive O+-implanted AlGaAs layer in the extrinsic emitter region sufficiently suppresses electron injection even under high-forward-bias conditions, allowing high collector current densities. The use of a C-doped base is especially effective for small-scale C-up HBT's because it suppresses the undesirable turn-on voltage shift caused by base dopant diffusion in the intrinsic area around the collector-mesa perimeter that occurs during the high-temperature Zn-diffusion process after implantation. Even in a small-scale trasistor with a 2 µm2 µm collector, a current gain of 15 is obtained. A microwave transistor with a 2 µm10 µm collector has a cutoff frequency fT of 68 GHz and a maximum oscillation frequency fmax of 102 GHz. A small-scale C-up HBT with a 2 µm2 µm collector shows a higher fmax of 110 GHz due to reduced base/collector capacitance CBC and its fmax remains above 100 GHz, even at a low collector current of 1 mA. The CBC of this device is estimated to be as low as 2.2 fF. Current gain dependence on collector size is also investigated for C-up HBT's and it is found that the base recombination current around the collector-mesa perimeter reduces the current gain.

This paper presents a new approach to the recovery of 3-D structure from multiple pairs of images from different viewpoints. Searching for the corresponding points between images, which is common in stereopsis, is avoided. Extracted edges from input images are projected back into 3-D space, and their intersections are calculated directly. Many false intersections may appear, but if we have many pair images, true intersections are extracted by appropriate thresholding. Octree representation of the intersections enables this approach. We consider a way to treat adjacent edge piexels as a line segment rather than as individual points, which differs from previous works and leads to a new algorithm. Experimental results using both synthetic and actual images are also described.

Mode separation of a multiplex mode in a mode-division multiplexing system is studied. The clear, desired single-mode pattern, which is separated from the multiplex mode by using a holographic filter, is observed in the experiment.