This paper proposes an optical power limiter composed of serially connected two tapered velocity couplers consisting partly of nonlinear material. The method of device designing is explained and it is exemplified that the optical output can be regulated stably to a prescribed value over a wide range of optical input. The device performance is simulated by means of FD-BPM algorithm.

In any ill-conditioned information-transfer system, as in long-distance communication, we often must construct feedback confirmation channels, in order to confirm that informations received at destinations are correct. Unfortunately, for such systems, undesirable uncertain fluctuations may be induced not only into forward communication channels but also into feedback confirmation channels, and it is such difficult that transmitters always confirm correct communications. In this paper, two fuzzy-set-valued mappings are introduced into both the forward communication channel and the feedback confirmation channel, separately, and overall system-behaviors are discussed from the standpoint of functional analysis, by means of fixed point theorem for a system of generalized equations on fuzzy-set-valued mappings. As a result, a good mathematical condition is successfully obtained, for such information-transfer systems, and fine-textured estimations of solutions are obtained, at arbitrary levels of values of membership functions.

Currently, the issues in Quality of Service, fairness and pricing strategies should have expedited the emergence of service differentiation in wireless access networks. In this paper, we propose a novel scheduling algorithm, called the Wireless Differentiated Fair Queueing (WDFQ) algorithm, to accommodate such need by providing delay/jitter controls, and fair residual bandwidth sharing for real-time and non-real-time traffic streams simultaneously. We show that the WDFQ scheme can achieve excellent performance, including timely delivery of real-time traffic, virtually error-free transmission of non-real-time traffic, and fair usage of channel bandwidth among remote stations. In addition, the location-dependent channel error property, as appeared in most wireless networks, are considered in the model and the temporary short error bursts are compensated by credits of bandwidth. The simulation results suggest that the length of retransmission period should be adapted to the error length to achieve good performance and maintain low implementation complexity.

We propose a low-cost, high-uniformity, and low excess loss star coupler. The proposed star coupler comprises a planar lightguide, a diffuser, and polymer optical fibers (POFs). High-uniformity of optical power distribution was enabled by utilizing the diffused light transmission. Input light is diffused by the diffuser that is attached between the input POFs and the planar lightguide and transmitted through the planar lightguide. The optimum width-to-length ratio of the lightguide is clarified through simulations and experiments. We fabricated the star couplers based on the optimum width-to-length ratio for evaluation. The fabricated 1616 star coupler showed the excellent uniformity at the distribution ratio of 0.8 dB and the excess loss of 3.3 dB. The fabricated star coupler also provides a wide tolerance for misalignment. The maximum number of nodes to assure high transmission quality and the bandwidth of the proposed star coupler are discussed. The proposed star coupler is remarkably cost effective since it can be produced by injection-molding technology. The proposed star coupler enables easy multi-channel interconnection.

This paper treats weight distributions of the coset leaders of binary linear block codes. We first present a method for computing the weight distribution of the coset leaders of a given code using two tables each of which stores the weights of the coset leaders of a related code of the code. Then, the weight distributions of the coset leaders of the (N,K) Reed-Muller codes, binary primitive BCH codes, and their extended codes with N 128 and 29 N-K 42 that are obtained by using the computing method are given.

In order to increase the link capacity in the wideband direct sequence code division multiple access (W-CDMA) reverse link, employing a parallel-type coherent multi-stage interference canceller (COMSIC) is more practical than employing a serial (successive)-type due to its inherent advantage of a short processing delay, although its interference suppression effect is inferior to that of the serial-type. Therefore, this paper proposes a parallel-type COMSIC with iterative channel estimation (ICE) using both pilot and decision-feedback data symbols at each canceling stage in order to improve the interference suppression effect of the parallel-type COMSIC. Computer simulation results demonstrate that by applying the parallel-type COMSIC with ICE after FEC decoding, the capacity in an isolated cell can be increased by approximately 1.6 (2.5) times that of the conventional parallel-type COMSIC with channel estimation using only pilot symbols (the MF-based Rake receiver) at the required average transmit Eb/N0 of 15 dB, i.e. in the interference-limited channel. The results also show that, although the capacity in the isolated cell with the parallel-type COMSIC with ICE after FEC decoding is degraded by approximately 6% compared to that with the serial-type COMSIC with ICE after FEC decoding, the processing delay can be significantly decreased owing to the simultaneous parallel operation especially when the number of active users is large.

It is difficult for an adaptive array to reduce interference signals efficiently from received signals when the interference signals and desired signal are closely located. This is a problem for a spatial division multiple access (SDMA) system using the multibeam adaptive array as a multiuser detector. In this paper, we propose a space domain multistage interference canceller (SD-MIC) for the SDMA system. Its performance is evaluated by computer simulations, assuming Japanese personal handy phone system (PHS) uplink environments. The results show remarkable improvement in high spatial correlation situations.

This paper proposes a low-distortion noise canceller and its learning algorithm which is robust against crosstalk and is applicable for continuous sounds. The proposed canceller consists of two stages: cancellation of the crosstalk and cancellation of the noise. A recursive filter reduces the number of computations for noise cancellation stage. Separate filters for the adaptation and the filtering are introduced for crosstalk cancellation. Computer simulations show 10 dB improvement of the error power.

A new CMOS DC voltage doubler with nonoverlapping switching control is proposed, in order to eliminate the dynamic current loss during switching as well as the threshold voltage drop of the serial switches. The simulated results at 1.5 V show that the maximum power efficiency is improved with about 30%, whereas the efficiency in the low output current region is larger than 5 times compared to the conventional voltage doublers. This proposed CMOS DC voltage doubler can be used as a VPP generator of low voltage DRAM's.

One major breakthrough on the communication society recently is the extension of networking from wired to wireless networks. This has made possible creating a mobile distributed computing environment and has brought us several new challenges in distributed protocol design. Obviously, wireless networks do have some fundamental differences from wired networks that need to be paid special attention of, such as lower communication bandwidth compared to wired networks, limited electrical power due to battery capacity, and mobility of processes. These new issues make traditional recovery algorithm unsuitable. In this paper, we propose an efficient algorithm with O(nr) message complexity where O(nr) is the total number of mobile hosts (MHs) related to the failed MH. In addition, these MHs only need to rollback once and can immediately resume its operation without waiting for any coordination message from other MHs. During normal operation, the application message needs O(1) additional information when it transmitted between MHs and mobile support stations (MSSs). Each MSS must keep an ntotal_h*n cell_h dependency matrix, where O(ntotal_h) is the total number of MHs in the system and ncell_h is the total number of MHs in its cell. Finally, one related issue of resending lost messages is also considered.

This paper presents a multi-thread evolutionary programming (MEP) technique that is composed of global, local, and minimal search units. An appropriate search routine is called depending on the current situation and the individuals are updated by using the selected routine. In each search routine, the individuals are updated with a normalized relative fitness function to improve the robustness of the algorithm. The proposed method is applied to the problem of backing up a truck-and-trailer system to a loading dock. A fuzzy logic controller is designed for a truck-and-trailer backer-upper system and the MEP algorithm is used to optimize the representative parameters of the fuzzy logic controller. The simulation results show that the proposed controller performs well even under a large variety of initial positions.

This paper describes the results of a series of laboratory experiments for performance evaluations of our proposed Maximum Likelihood Sequence Estimation (MLSE) based interference canceller, the Interference Canceling Equalizer (ICE), which can cancel both co-channel interference (CCI) and inter-symbol interference (ISI). To verify the feasibility of ICE for the Japanese cellular communications system, a standard of which has been released under the name of Personal Digital Cellular (PDC) system, a prototype system was constructed using 27 TI TMS320C40 Digital Signal Processor (DSP) chips. The ICE prototype works in real-time on the PDC air interface, major specifications of which are π/4 QDPSK 21 k symbols/s 3-channel time-division multiple-access (TDMA). Two-branch diversity reception is used to enhance the signal detection performance of ICE. In the experiments, BER performances were evaluated using the prototype system. Under a single-path Rayleigh fading and a single CCI condition, the ICE receiver attains the BER of less than 310-2 with the negative values of the average CIR: for fD = 5 Hz and 40 Hz, the average CIR more than -20 dB and -10 dB, respectively. Under a double-path Rayleigh fading and a single CCI condition, the ICE receiver attains the BER of less than 1.510-2 with the negative values of the average CIR: for fD = 5 Hz and 40 Hz, the average CIR more than -20 dB and -10 dB, respectively. The laboratory test results suggest that the ICE receiver has potential for system capacity enhancement.

We have developed a measuring system for high-Tc superconducting single-flux quantum circuits and evaluated its performance in terms of bit error rate (BER) measurement for given signal voltage levels. The system includes magnetic shields and a high-frequency test fixture mounted on a closed-cycle cooler. The test fixture is made of non-magnetic material. The transmission characteristics of the measuring system were evaluated by using a vector network analyzer at frequencies ranging from 40 MHz to 20 GHz. The operating temperature of the measuring system ranges from 20 K to room temperature. We connected a 12-GHz wideband pulse amplifier to the system and evaluated its high-speed transmission characteristics. We used a standard 50-Ω microstrip line as an impedance-matched sample. The signal used in the experiment was a 215-1 pseudo random bit signal (PRBS) at 3 Gbps. As a result, the output voltage required for an output driver under the experimental condition was 18.8 mV in order to obtain a resolution of BER measurement of 10-12.

The field supported by multilayered periodic waveguides is well characterized by only one or two discrete leaky waves, rather than by a more complicated field representation that includes continuous spectra. The rigorous leaky-modes coupled in multilayered geometry can be then treated by relatively simpler and analytic model that describes the operation of practical optoelectronic devices in terms of leakage effects. To complement our modeling, we discuss and emphasize novel mathematical formulations based on the field orthogonality conditions of TE and TM modes coupled in multilayered periodic structures. In addition, to show the validity of our approach we numerically evaluate new physical meanings to illustrate quantitatively and rigorously the coupling efficiency of grating-assisted directional couplers (GADCs). The results reveal that the systematic and effective technique yields phenomenologically useful interpretations.

System capacity of a system consisting of N classes of users is characterized by N-vectors representing the number of users that can be accommodated under a specified BER (bit error rate) constraint in each class. In this paper, system capacity of the reverse link of a wireless multimedia CDMA system with processing gain control is analyzed in the asymptotic regime, when the processing gain G, for receivers with and without CCI cancellers. A new scheme for processing gain control with an optimized power allocation is proposed and its system capacity is compared with the conventional processing gain control scheme as well as the previously discussed power control scheme. It is shown that the proposed scheme has a certain advantage over other schemes.

Many researchers have used hypercube interconnection networks for their good properties to construct many parallel processing systems. However, as the number of processors increases, the probability of occurrences of faulty nodes also increases. Hence, for hypercube interconnection networks which have faulty nodes, several efficient dynamic routing algorithms have been proposed which allow each node to hold status information of its neighbor nodes. In this paper, we propose an improved version of the algorithm proposed by Chiu and Wu by introducing the notion of full reachability. A fully reachable node is a node that can reach all nonfaulty nodes which have Hamming distance l from the node via paths of length l. In addition, we further improve the algorithm by classifying the possibilities of detours with respect to each Hamming distance between current and target nodes. We propose an initialization procedure which makes use of an equivalent condition to perform this classification efficiently. Moreover, we conduct a simulation to measure the improvement ratio and to compare our algorithms with others. The simulation results show that the algorithms are effective when they are applied to low-dimensional hypercube interconnection networks.

Phase locked loops (PLL's) are well known as a threshold extension demodulator for analogue FM signals. This capability may lead to the low bit error rate demodulation for digital FM signals. A PLL has also its native frequency tracking ability and is suited to the demodulation of the signals having large Doppler shifts, for example signals from Low Earth Orbit (LEO) satellites. In this paper, we study the demodulation scheme of Continuous Phase FSK (CPFSK) and Gaussian filtered MSK (GMSK) signals using a Digital Signal Processing type Digital PLL (DSP DPLL). First we propose a DSP DPLL completely equivalent to an Analog PLL (APLL). Next we adopt the sequence estimation scheme to compensate the Inter-Symbol Interference (ISI) associated with the finite loop bandwidth of the DSP DPLL. Through computer simulations it is clarified that the proposed DSP DPLL with sequence estimator can achieve better BER performance compared with the conventional Limiter Discriminator (LD) detection on the AWGN channel. We have also shown that the DSP DPLL with sequence estimator has excellent BER characteristics on Rician fading channels having actual large Doppler shifts.

This paper presents an evolutionary technique to build and maintain fault-recoverable digital circuits. As the synthesis of a circuit by genetic algorithm is progressed according to the circuit behavioral objectives and interactions with the environments, the knowledge regarding the architecture as well as the placement and routing processes is not the major concern of the proposed method. The evolutionary behavior of the circuit also prevents the circuit from stuck-at faults by continuously modifying the neighboring circuit blocks accordingly. This is done without the prior knowledge of where and how the faults occur because of the evolutionary nature. Thus, the overhead circuit blocks for fault diagnosis and redundancy are minimized with this design. The fault-recoverable evolvable hardware circuits are synthesized to build a few combinational logics by evolution and the fault recovery capabilities are shown with the reconfigurable FPGA.

We investigated the dependence of the desired echo return loss on frequency for various hands-free telecommunication conditions by subjective assessment. The desired echo return loss as a function of frequency (DERLf) is an important factor in the design and performance evaluation of a subband echo canceller, and it is a measure of what is considered an acceptable echo caused by electrical loss in the transmission line. The DERLf during single-talk was obtained as attenuated band-limited echo levels that subjects did not find objectionable when listening to the near-end speech and its band-limited echo under various hands-free telecommunication conditions. When we investigated the DERLf during double-talk, subjects also heard the speech in the far-end room from a loudspeaker. The echo was limited to a 250-Hz bandwidth assuming the use of a subband echo canceller. The test results showed that: (1) when the transmission delay was short (30 ms), the echo component around 2 to 3 kHz was the most objectionable to listeners; (2) as the transmission delay rose to 300 ms, the echo component around 1 kHz became the most objectionable; (3) when the room reverberation time was relatively long (about 500 ms), the echo component around 1 kHz was the most objectionable, even if the transmission delay was short; and (4) the DERLf during double-talk was about 5 to 10 dB lower than that during single-talk. Use of these DERLf values will enable the design of more efficient subband echo cancellers.

In this paper we develop a robust control theory to achieve fault-tolerant behaviors of timed discrete event systems (DESs) with model uncertainty represented as a set of some possible models. To demonstrate the effectiveness of the proposed theory, we provide a case study of a resistance spot welding process.