A reverse mode liquid crystal (LC) display has been investigated. A driving voltage strongly depends on a morphology which changes by reactive mesogens, photo initiators and LCs. It becomes higher when the domain size of the liquid crystal and the particle of the polymer reactive mesogen are smaller.

In this paper, training symbol designs for estimation of frequency selective channels and compensation of in-phase (I) and quadrature (Q) imbalances on orthogonal frequency division multiplexing (OFDM) transmitters and receivers are studied. We utilize cross entropy (CE) optimization techniques together with convex optimization to design training sequences having low channel estimate mean squared error (MSE) and minimum effects of I/Q mismatch, while lowering the peak power of the training signals. The proposed design provides better channel estimate MSE and bit error rate (BER) performances and is applicable to OFDM systems with and without null subcarriers. The efficacies of the proposed designs are corroborated by analysis and simulation results.

Limited Random Sequence (LRS) is quite important for Analog-to-Information Converter (AIC) because it determines the random sampling scheme and the resultant performance. LRS is established with the elements of “0” and “1”. The “1” appears randomly in the segment of the sequence, so that the production of the original signal and LRS can be considered as the approximation of the random sampling of the original signal. The random sampling result can perfectly recover the signal with Compressive Sensing (CS) algorithm. In this paper, a high order LRS is proposed for the AIC design in Distributed Compressive Sensing (DCS), which has the following three typical features: 1) The high order LRS has the elements of integer which can indicate the index number of the sensor in DCS. 2) High order LRS can adapt to the sparsity variation of the original signal detected by each sensor. 3) Employing the AIC with high order LRS, the DCS algorithm can recover the signal with very low sampling rate, usually above 2 orders less than the traditional distributed sensors. In the paper, the scheme and the construction algorithm of high order LRS are proposed. The performance is evaluated with the application studies of the distributed sensor network and the camera picture correspondingly.

In this paper, we propose a hardware architecture of high-speed sorted QR decomposition for 44 MIMO wireless communication systems. QR decomposition (QRD) is commonly used in many MIMO detection algorithms. In particular, sorted QR decomposition (SQRD) is the advanced algorithm to improve MIMO detection performance. We design an SQRD hardware architecture by using a modified Gram-Schmidt algorithm with pipelining and recursive processing. In addition, we propose an extended architecture which can decompose an augmented channel matrix for MMSE MIMO detection. These architecture can be applied in high-throughput MIMO-OFDM system such as IEEE802.11n which supports data throughput of up to 600 Mbps. We implement the proposed SQRD architecture and the proposed MMSE-SQRD architecture with 179k and 334k gates in 90 nm CMOS technology. These proposed design can achieve a high performance of up to 40.8 and 50.0 million 44 SQRD operations per second with the maximum operating frequency of 245 and 300 MHz.

In this paper, new design of optimal frequency hopping sequences (FHSs) with low hit zone (LHZ) with respect to the Peng-Fan-Lee bound is presented based on interleaving techniques. By the new design, new classes of optimal LHZ FHS sets with large family size are obtained. It is shown that all the sequences in the proposed FHS sets are shift distinct. The proposed FHS sets are suitable for quasi-synchronous time/frequency hopping code division multiple access systems to eliminate multiple-access interference.

In this paper, a block-constrained trellis coded vector quantization (BC-TCVQ) algorithm is combined with an algebraic codebook to produce an algebraic trellis vector code (ATVC) to be used in ACELP coding. ATVC expands the set of allowed algebraic codebook pulse position, and the trellis branches are labeled with these subsets. The Viterbi algorithm is used to select the excitation codevector. A fast codebook search method using an efficient non-exhaustive search technique is also proposed to reduce the complexity of the ATVC search procedure while maintaining the quality of the reconstructed speech. The ATVC block code is used as the fixed codebook of AMR-NB (12.2 kbps), which reduces the computational complexity compared to the conventional algebraic codebook.

In this paper, we constructed a class of low correlation zone sequence sets derived from the interleaved technique and DFT matrices. When p is a prime such that p > 3, p-ary LCZ sequence sets with parameters LCZ(pn-1,pm-1,(pn-1)/(pm-1),1) are constructed based on a DFT matrix with order pp, which is optimal with respect to the Tang-Fan-Matsufuji bound. When p is a prime such that p ≥ 2, pk-ary LCZ sequence sets with parameters LCZ(pn-1,pk-1,(pn-1)/(pk-1),1) are constructed based on a DFT matrix with order pkpk, which is also optimal. These sequence sets are useful in certain quasi-synchronous code-division mutiple access (QS-CDMA) communication systems.

This paper proposes a low-phase-noise ring-VCO-based frequency multiplier with a new subharmonic direct injection locking technique that only uses a time-delay cell and four MOS transistors. Since the proposed technique behaves as an exclusive OR and can double the reference signal frequency, it increases phase correction points and achieves low phase noise characteristic across the wide output frequency range. The frequency multiplier was fabricated by using 65 nm Si CMOS process. Measured 1-MHz-offset phase noise at 6.34 GHz with reference signals of 528 MHz was -119 dBc/Hz.

This paper investigates construction methods of perfect 16-QAM sequences and arrays, since such sequences and arrays play quite an important role in synchronization of communication systems making use of 16-QAM signals. The method used for obtaining the results is to establish a relationship between the known perfect quaternary sequences/arrays and the required ones so that the former is transformed into the latter. Consequently, the sufficient conditions for implementing the required transformations are derived, and several examples are given. Our methods can provide perfect 16-QAM sequences with lengths 2, 4, 8, and 16, which are given in Table A·1 and infinite families of perfect 16-QAM arrays, whose existing sizes up to dimension 5 and volume 2304 are listed in Tables A·2 and A·3.

Polarization-maintaining photonic crystal fiber couplers (PM-PCFCs) were fabricated using a CO2 laser irradiation technique. We could control the states of air holes in the tapered region of couplers by adjusting the laser power density in the fusion and the elongation processes. It was demonstrated that the air hole remaining PM-PCFC exhibited polarization-splitting characteristics and that the air hole collapsed PM-PCFC had polarization insensitive coupling characteristics.

The style of a gesture provides significant information for communication, and thus understanding the style is of great importance in improving gestural interfaces using hand gestures. We present a novel method to estimate temporal and spatial scale—which are considered principal elements of the style—of hand gestures. Gesture synchronization is proposed for matching progression between spatio-temporally varying gestures, and scales are estimated based on the progression matching. For comparing gestures of various sizes and speeds, gesture representation is defined by adopting turning angle representation. Also, LCSS is used as a similarity measure for reliability and robustness to noise and outliers. Performance of our algorithm is evaluated with synthesized data to show the accuracy and robustness to noise and experiments are carried out using recorded hand gestures to analyze applicability under real-world situations.

In this letter, we present a general construction of sequence sets with low correlation zone, which is based on finite fields and the balance property of some functions. The construction is more flexible as far as the partition of parameters is concerned. A simple example is also given to interpret the construction.

The present paper has reported a case study of the “Electronic Doctor's Bag” which is a telemedical tool for home-visit medical services using the mobile communications environment in an isolated island and a disaster area hit by the tsunami. Clinical trials performed for 20 patients around a clinic in Miyako Island indicated that the communication functions of the proposed system were highly evaluated by patients as well as medical staffs. However, the system still has room for further improvement in operability, portability and mobile communication environment. The experience at the shelter in Kesennuma City suggested that mobile healthcare tools such as the proposed system will be strongly required when there are no or only paramedical staffs after leaving of emergency medical staffs.

High-performance FFT processor is indispensable for real-time OFDM communication systems. This paper presents a CORDIC based design of variable-length FFT processor which can perform various FFT lengths of 64/128/256/512/1024/2048/4096/8192-point. The proposed FFT processor employs memory based architecture in which mixed radix 4/2 algorithm, pipelined CORDIC, and conflict-free parallel memory access scheme are exploited. Besides, the CORDIC rotation angles are generated internally based on the transform of butterfly counter, which eliminates the need of ROM making it memory-efficient. The proposed architecture has a lower hardware complexity because it is ROM-free and with no dedicated complex multiplier. We implemented the proposed FFT processor and verified it on FPGA development platform. Additionally, the processor is also synthesized in 0.18 µm technology, the core area of the processor is 3.47 mm2 and the maximum operating frequency can be up to 500 MHz. The proposed FFT processor is better trade off performance and hardware overhead, and it can meet the speed requirement of most modern OFDM system, such as IEEE 802.11n, WiMax, 3GPP-LTE and DVB-T/H.

In this paper, we introduce a construction of 16-QAM sequences based on known binary sequences using multiple sequences, interleaved sequences and Gray mappings. Five kinds of binary sequences of period N are put into the construction to get five kinds of new 16-QAM sequences of period 4N. These resultant sequences have 5-level autocorrelation {0, ±8, ±8N}, where ±8N happens only once each. The distributions of the periodic autocorrelation are also given. These will provide more choices for many applications.

This paper proposes a virtual layered successive detector with adaptive transmit signal phase rotation for quadrature amplitude modulation (QAM) that enables high speed communication even in downlinks of wireless communication systems. It is shown that the detection performance is degraded when the eigenvalue of a virtual channel becomes close to the power of the additive white Gaussian noise (AWGN). Therefore, adaptive transmit signal phase rotation is introduced for the detector to improve the transmission performance. For the transmit phase rotation, three techniques to search the rotation angles are proposed, which can reduce the feedback information from the receiver to the transmitter. Among the three proposed techniques, the technique called “iterative variable step step search” is shown to achieve the best performance. Actually, it is confirmed by computer simulation that the variable step search makes the detector attain about 17 dB of a gain at the bit error rate (BER) of 10-5 in 42 multiple-input-multiple-output (MIMO) systems.

The Hilbert-Schmidt independence criterion (HSIC) is a kernel-based statistical independence measure that can be computed very efficiently. However, it requires us to determine the kernel parameters heuristically because no objective model selection method is available. Least-squares mutual information (LSMI) is another statistical independence measure that is based on direct density-ratio estimation. Although LSMI is computationally more expensive than HSIC, LSMI is equipped with cross-validation, and thus the kernel parameter can be determined objectively. In this paper, we show that HSIC can actually be regarded as an approximation to LSMI, which allows us to utilize cross-validation of LSMI for determining kernel parameters in HSIC. Consequently, both computational efficiency and cross-validation can be achieved.

For maximum-likelihood (ML) estimation to jointly track carrier frequency offset (CFO) and channel impulse response (CIR) in orthogonal frequency division multiplexing (OFDM) systems, we present a finite high order approximation method utilizing the MATLAB ‘roots' command on the log-likelihood function derived from the OFDM received signal, coupled with an adaptive iteration algorithm. The tracking performance of this high order approximation algorithm is found to be excellent, and as expected, the algorithm outperforms the other existing first order approximation algorithms.

This paper addresses conjugate-gradient (CG) based pilot-assisted channel estimation and equalization in doubly selective channels for orthogonal frequency division multiplexing (OFDM) block transmissions. With the help of the discrete prolate spheroidal sequence, which shows flat mean-square error (MSE) curves for the reconstructed channels in the presence of Doppler frequency mismatch, a basis expansion model for a parsimonious channel representation over multiple OFDM blocks is developed, a system equation for the least square channel estimation under widely used pilot lattices, where the pilot symbols are irregularly placed in the subcarrier domain, is formulated by introducing carving matrices, and the standard CG method is applied to the system. Relying on the CG method again, the linear minimum mean-square error channel equalization is pursued without performing any matrix inversion, while elevating the convergence speed of the iterative algorithm with a simple preconditioner. Finally, we validate our schemes with numerical experiments on the integrated services digital broadcasting-terrestrial system in doubly-selective channels and determine the normalized MSE and uncoded bit error rate.

A wideband beamformer with mainlobe control is proposed. To make the beamformer robust against pointing errors, inequality rather than equality constraints are used to restrict the mainlobe response, thus more degrees of freedom are saved. The constraints involved are nonconvex, therefore are linearly approximated so that the beamformer can be obtained by iterating a second-order cone program. Moreover, the response variance element is introduced to achieve a frequency invariant beamwidth. The effectiveness of the technique is demonstrated by numerical examples.