With the development of personal electronic equipment, the use of a smartphone with a tri-axial accelerometer to detect human physical activity is becoming popular. In this paper, we propose a new feature based on FFT for activity recognition from tri-axial acceleration signals. To improve the classification performance, two fusion methods, minimal distance optimization (MDO) and variance contribution ranking (VCR), are proposed. The new proposed feature achieves a recognition rate of 92.41%, which outperforms six traditional time- or frequency-domain features. Furthermore, the proposed fusion methods effectively improve the recognition rates. In particular, the average accuracy based on class fusion VCR (CFVCR) is 97.01%, which results in an improvement in accuracy of 4.14% compared with the results without any fusion. Experiments confirm the effectiveness of the new proposed feature and fusion methods.

This paper proposes a simple and practical scheme to decide the direction of a phased array antenna beam in wireless access systems using Radio-over-Fiber (RoF) technique. The feasibility of the proposed scheme is confirmed by the optical and wireless transmission experiments using 2GHz RoF signals. In addition, two-dimensional steering operation in the millimeter-wave band is demonstrated for targeting future high-speed wireless communication systems. The required system parameters for practical use are also provided by investigating the induced transmission penalties. The proposed detection scheme is applicable to two-dimensional antenna beam steering in the millimeter-wave band by properly designing the fiber length and wavelength variable range.

Electromagnetic scattering problems of canonical 2D structures can be analyzed with a high degree of accuracy by using the point matching method with mode expansion. In this paper, we will extend our previous method to 3D electromagnetic scattering problems and investigate the radar cross section of spherical shells and the computational accuracy.

Laser diode capable of high speed direct modulation is one of the key solution for short distance applications due to their low power consumption, low cost and small size features. Realization of high modulation bandwidth for direct modulated laser maintaining the above mentioned feature is needed to enhance the short distance, low cost data transmission. One promising approach to enhance the modulation speed is to increase the photon density to achieve high modulation bandwidth. So to achieve this target, 1.55 $mu$m InGaAsP/InGaAsP multiple quantum well (MQW) asymmetric active multimode interferometer laser diode (active MMI-LD) has been demonstrated [1]. The split pumping concept has been applied for the active MMI-LD and significant enhancement of electrical to optical 3 dB down frequency bandwidth (f$_{mathrm{3dB}})$ up to 8 GHz has been successfully confirmed. The reported high bandwidth for split pump active MMI-LD is around 3.5 times higher than the previously reported maximum 3 dB bandwidth (2.3 GHz) of active MMI-LD without split pumping section. That shows, the splitted multimode pumping section behind the electrically isolated modulation section can potentially improve the modulation bandwidth of active MMI-LD. Clear and open eye diagram had also been confirmed for 2.5 Gbps, (2$^{mathrm{7}}$-1) pseudo random bit sequence (PRBS) modulation.

This letter presents an automatic 2D-to-3D conversion method using a structure from motion (SfM) process for multi-object scenes. The foreground and background regions may have different depth values in an image. First, we detect the foreground objects and the background by using a depth histogram. Then, the proposed method creates the virtual image by projecting each region with its computed projective matrix. Experimental results compared to previous research show that the proposed method provides realistic stereoscopic images.

Although many companies have developed robots that assist humans in the activities of daily living, safety requirements and test methods for such robots have not been established. Given the risk associated with a robot malfunctioning in the human living space, from the viewpoints of safety and EMC, it is necessary that the robot does not create a hazardous situation even when exposed to possibly severe electromagnetic disturbances in the operating environment. Thus, in immunity tests for personal care robots, the safety functions should be more rigorously tested than the other functions, and be repeatedly activated in order to ascertain that the safety functions are not lost in the presence of electromagnetic disturbances. In this paper, immunity test procedures for personal care robots are proposed that take into account functional safety requirements. A variety of test apparatuses are presented, which were built for activating the safety functions of robots, and detecting whether they were in a safe state. The practicality of the developed immunity test system is demonstrated using actual robots.

Toward the actualization of an automatic navigation system for fetoscopic tracheal occlusion (FETO) surgery, this paper proposes a 3D ultrasound (US) calibration-based approach that can locate the fetal facial surface, oral cavity, and airways by a registration between a 3D fetal model and 3D US images. The proposed approach consists of an offline process and online process. The offline process first reconstructs the 3D fetal model with the anatomies of the oral cavity and airways. Then, a point-based 3D US calibration system based on real-time 3D US images, an electromagnetic (EM) tracking device, and a novel cones' phantom, computes the matrix that transforms the 3D US image space into the world coordinate system. In the online process, by scanning the mother's body with a 3D US probe, 3D US images containing the fetus are obtained. The fetal facial surface extracted from the 3D US images is registered to the 3D fetal model using an ICP-based (iterative closest point) algorithm and the calibration matrices, so that the fetal facial surface as well as the oral cavity and airways are located. The results indicate that the 3D US calibration system achieves an FRE (fiducial registration error) of 1.49±0.44mm and a TRE (target registration error) of 1.81±0.56mm by using 24 fiducial points from two US volumes. A mean TRE of 1.55±0.46 mm is also achieved for measuring location accuracy of the 3D fetal facial surface extracted from 3D US images by 14 target markers, and mean location errors of 2.51±0.47 mm and 3.04±0.59 mm are achieved for indirectly measuring location accuracy of the pharynx and the entrance of the trachea, respectively, which satisfy the requirement of the FETO surgery.

An LSI Chip-Package-Board integrated power noise simulation model and its validity is discussed in this paper. A unified power delivery network (PDN) of LSI chip, package, and printed circuit board (PCB) is connected with on-chip power supply current models with capacitor charging expression. The proposed modeling flow is demonstrated for the 32-bit microprocessor in a 1.0V 90nm CMOS technology. The PDN of the system that includes a chip, bonding wires and a printed circuit board is modeled in an equivalent circuit. The on-chip power supply noise monitoring technique and the magnetic probe method is applied for validating simulation results. Simulations and measurements explore power supply noise generation with the dependency on operating frequencies in the wide range from 10MHz to 300MHz, under the operation mode of dynamic frequency scaling, and in the long time operation with various operation codes. It is confirmed that the proposed power supply noise simulation model is helpful for the noise estimation throughout the design phase of the LSI system.

Gait-based owner authentication using accelerometers has recently been extensively studied owing to the development of wearable electronic devices. An actual gait signal is always subject to change due to many factors including variation of sensor attachment. In this research, we tackle to the practical sensor-orientation inconsistency, for which signal sequences are captured at different sensor orientations. We present an iterative signal matching algorithm based on phase-registration technique to simultaneously estimate relative sensor-orientation and register the 3D acceleration signals. The iterative framework is initialized by using 1D orientation-invariant resultant signals which are computed from 3D signals. As a result, the matching algorithm is robust to any initial sensor-orientation. This matching algorithm is used to match a probe and a gallery signals in the proposed owner authentication method. Experiments using actual gait signals under various conditions such as different days, sensors, weights being carried, and sensor orientations show that our authentication method achieves positive results.

Faced with social problems such as rapidly aging society, the solutions have been expected in sports medicine. Humans became widely distributed on the earth from their birth by acquiring abilities to walk in an upright position and to adapt themselves to various natural environments. However, seeking a ‘comfortable environment’ in modern civilization has deteriorated these genetic characteristics of humans, and the consumption of resources and energy to acquire such a ‘comfortable environment’ has induced global warming-associated natural disasters and the destruction of social order. To halt this vicious cycle, we may reactivate the genetic characteristics in humans by doing exercise. To do this, we have developed a health promotion program for middle aged and older people, Jukunen Taiikudaigaku Program, in cooperation with the Japanese government, developed high-intensity interval walking training (IWT), and examined the physical and mental effects on 5,400 people for these 10 years. We found that IWT for 4 months increased physical fitness by 10-20%, decreased the indices of life-style related diseases by 10-20%. Since a prescription of IWT can be conducted by using an IT network system called e-Health Promotion System, the participants in the program were able to receive the prescription even if they lived remote from trainers, enabling them to perform IWT at their favored places and times, and also at low cost. Moreover, we found some single nucleotide polymorphisms closely related to inter-individual differences in the responses to IWT. Further, the system enables us to assess the inactivation/activation of genes for inflammatory responses which has been suggested to be involved in life-style related diseases. Also, the system enables us to search foods to promote health when they are consumed during exercise training. Thus, the system would have strong potential to promote health of middle-aged and older people in advanced aging society.

We present the concept of an on-line electric vehicle (OLEV) and its wireless power transfer mechanism and analyze the electromagnetic compatibility characteristics. As magnetic fields transfer 100kW of power to the vehicle, reduction of electromagnetic field (EMF) noise is a critical issue for protection of the human body. Also, with respect to electromagnetic interference (EMI) noise, a proper measurement method has not yet been established for this low frequency high power system. In this paper, low frequency magnetic field shielding methods and application of the shields to the OLEV system are presented. Furthermore, a standard low frequency magnetic field measurement is suggested as an EMI test.

“How to get the original ideas” is the fundamental and critical issue for the researchers in science and technology. In this paper, the author writes his experiences concerning how he could encounter the interesting and original ideas of three research subjects, i.e., the accelerating medium effect, the guided-mode extracted integral equation and the surface plasmon gap waveguide.

A novel fabrication approach for the amperometric biosensor composed of carbon nanotubes (CNT), a plasma-polymerized film (PPF), hexamineruthenium(III)chloride (RU), and enzyme glucose oxidase (GOD) is reported. The configuration of the electrochemical electrode is multilayer films which contain sputtered gold, lower acetonitrile PPF, CNT, RU, GOD, and upper acetonitrile PPF, sequentially. First, PPF deposited on Au acts as a permselective membrane and as a scaffold for CNT layer formation. Second, PPF directly deposited on GOD acts as a matrix for enzyme immobilization. To facilitate the electrochemical communication between the CNT layer and GOD, CNT was treated with nitrogen plasma. The electron transfer mediator RU play a role as the mediator, in which the electron caused by enzymatic reaction transports to the electrode. The synergy between the electron transfer mediator and CNT provides benefits in terms of lowering the operational potential and enhancing the sensitivity (current). The optimized glucose biosensor revealed a sensitivity of 3.4µA mM-1 cm-2 at +0.4V vs. Ag/AgCl, linear dynamic range of 2.5-19mM, and a response time of 6s.

Microwave-assisted magnetic recording (MAMR) has been proposed as a candidate technology to realize areal recording densities of over 2 Tbit/inch2. MAMR requires a spin-torque oscillator (STO) to generate a strong high-frequency magnetic field that will induce magnetic resonance in the recording medium. The oscillation characteristics of STOs were previously investigated using a micromagnetic model that neglected the magnetic interaction among the STO, the single-pole-type (SPT) writer, and the recording head. The STO is typically placed in the gap between the main pole and the trailing shield of the SPT writer, so that the STO is inevitably subjected to strong magnetic interaction with the main pole and the trailing shield. We have developed a new simulator, referred to as an integrated MAMR simulator, that takes this interaction into account. The integrated simulator has revealed that the magnetic interaction has a strong influence on the oscillation characteristics.

Capacitor charging modeling accelerates the time-domain simulation of power current of cryptographic VLSI circuits in a CMOS technology. The model finely represents the amount of charges consumed during the operation of Advanced Encryption Standard (AES) cores in a variety of logical implementations, reflecting their internal logical activities. This approach significantly reduces the complexity of power current simulation, and accomplishes acceleration by a factor of more than 200 over the traditional transistor-level circuit simulation. The correlated power analysis (CPA) attack against AES cores is successfully simulated with a conventional circuit simulator, with the models individually derived for 10,000 different cipher texts. The CPA is also experimentally performed against AES cores fabricated in a 65nm as well as 130nm CMOS technologies, using SASEBO measurement standards. The fast power current simulation is demonstrated to be accurate enough to evaluate the vulnerability of AES cores in various logical implementations as well as in different technologies, and exhibits general agreements with the silicon measurements.

This paper describes a novel technique to replace some of the driven elements in an array antenna with parasitic elements. First, the antenna characteristics are studied by simulation for a basic unit array with one driven and two parasitic elements. The entire antenna is backed with a flat reflector to conform to practical applications. The parasitic elements are excited by the neighboring driven elements through the electromagnetic coupling effect. It is shown that at the optimal coupling condition, the radiation patterns are almost identical with those of an array antenna whose elements are all driven without coupling. The simulation result is confirmed by performing an experiment at 5.8GHz (λ =51.7mm). Finally, a 12-element array is formed by combining four unit arrays. The simulation results show that the maximum antenna gain is 19.4dBi, indicating that there is no penalty with respect to the antenna gain of a fully driven 12-element array. Therefore, the array antenna can be considerably simplified by replacing 67% of its elements with parasitic elements.

In this paper, we propose a chromatic adaptation model based on the adapting degree according to the level of adapting luminance and chromaticity in various surround illuminants. In the proposed model, first maximum adapted cone responses are calculated through the estimation of adapting degree for viewing conditions then corresponding colors are reproduced from original colors using the ratio of maximum adapted cone responses between different viewing conditions. The purpose of this study is to produce chromatic adaptation transform applied to environment-adaptive color display system. As a result, our proposed model can give better estimation performance than prior models and be embodied easily as a linear model in display systems. So it is confirmed that the implemented system can predict corresponding-color data very well under a variety of viewing conditions.

Channel modeling, which is quite important for wireless communications system design, is difficult to be statistically generated from experimental results due to the expense and time constraints. However, with the computational electromagnetics method, the Electro-Magnetic (EM) field can be emulated and the corresponding EM wave propagation scenario can be analyzed. In this letter, the Finite Integration Technique (FIT) method is utilized to calculate the EM wave propagation of the onboard mobile communications in the cabin of an aircraft. With the simulation results, the channel model is established. Compared with Finite-Difference Time-Domain (FDTD), the proposed scheme is more accurate, which is promising to be used in the cabin channel modeling for onboard mobile system design.

In this letter, a novel color removal method considering differences of colors in an input color image and achromatic color preservation is proposed. The achromatic color preservation is assigning lightness values to gray-levels concerning achromatic pixels for natural impression. The effectiveness and validity of the proposed method are verified by experiments.

In this paper, penetration phenomenon of an early-time (E1) high altitude electromagnetic pulse (HEMP) into dispersive underground multilayer structures is analyzed using electromagnetic modeling of wave propagation in frequency dependent lossy media. The electromagnetic pulse is dealt with in the power spectrum ranging from 100kHz to the 100MHz band, considering the fact that the power spectrum of the E1 HEMP rapidly decreases 30dB below its maximum value beyond the 100MHz band. In addition, the propagation channel consisting of several dielectric materials is modeled with the dispersive relative permittivity of each medium. Based on source and channel models, the propagation phenomenon is analyzed in the frequency and time domains. The attenuation levels at a 100m underground point are observed to be about 15 and 20dB at 100kHz and 1MHz, respectively, and the peak level of the penetrating electric field is found 5.6kV/m. To ensure the causality of the result, we utilize the Hilbert transform.