In distributed network systems, it is one of the most important problems how to assign the files to servers in view of cost and delay. It is obvious that there is a trading-off relationship between costs and delays in these systems. In order to evaluate the optimization that the total cost is minimized subject to the total delay, we have presented the Optimal File Allocation Model as 0-1 integer programming, and have investigated the general characteristics in distributed systems. In this model, we have introduced many cost and delay parameters to evaluate the total cost and delay in the system more exactly. In constructing practical systems, it is necessary to investigate the weight and the contribution of each parameter to the total cost. It is very useful to show how to estimate cost and delay parameters on the basis of this analysis. In this paper, we analyze the sensitivity of these parameters and make clear the influence between principal parameters.

We describe a simplified receiver structure having several receiving antennas (i.e., an adaptive array antenna system) and using time-division-multiplexing (TDM) signal processing. Three simplified receiver structures were investigated for use in the antenna system. To confirm the feasibility of using a TDM receiver, both a TDM receiver and a conventional adaptive array receiver were constructed for testing. In our proposed system, several repetitions of the constant modulus algorithm (CMA) are used to reduce co-channel interference (CCI). The frame format used for both receivers was the same as that of the personal handy phone system in Japan. The laboratory testing was done using a fading simulator to enable measurement of the bit error rate. The results are very promising and show the feasibility of the TDM receiver.

The stage 3/2 decoding scheme, originally suggested by U. Timor, is modified for a Rayleigh fading channel to improve the performance of a fast frequency-hopped multiple access/multilevel frequency shift keying system. When signal-to-noise ratio per bit is 30 dB, the simulation results show that the modified stage 3/2 decoding scheme increases the spectral efficiency by 11% compared to the modified stage 1 decoding scheme at bit error rate of 10-3. Further, the performance comparisons are made between the modified multistage decoding scheme and the diversity combining methods, where the modified stage 3/2 decoding scheme shows better performance.

In this letter, performance evaluation of a system that combines between Code-Division Multiple Access (CDMA) and ALOHA protocol in multimedia networks is presented. In our analysis, we compare the performance between the two basic techniques of ALOHA protocol, i.e., Slotted-ALOHA (S-ALOHA) and Unslotted-ALOHA (U-ALOHA), when combined with CDMA scheme to support voice and data users operating in same CDMA channel. The quality of service (QoS) required for voice and data media is completely taken care of. We obtain the throughput of data media, and the outage probability for voice considering both voice and data offered loads. Throughput performance of S-ALOHA technique is almost twice of that of U-ALOHA. However, we show in this letter that when we combine CDMA with the two basic techniques of ALOHA to accomplish multimedia transmission, both techniques have almost same performance. And, thus, CDMA U-ALOHA can be a good candidate for multimedia networks.

Magnetic random access memory (MRAM) possesses the attractive properties of non-volatility, radiation hardness, nondestructive readout, low voltage, high access speed, unlimited read and write endurance and high density. MRAM technology is described for the devices using giant magnetoresistance (GMR) and tunneling magnetoresistance (TMR) materials in this paper. The TMR type MRAM architectures using ferromagnetic tunneling junctions (MTJ) are more attractive for mainstream RAM applications than the GMR type, because the signal of the TMR type is larger than that of the GMR type. A MRAM device with an MTJ plus MOS transistor switch architecture, which can provide large signal-to noise ratio, is detailed. A design of the MTJ element is discussed and the requirements for the junction resistance and the TMR needed for the memory device are demonstrated based on the simple signal voltage calculations. The TMR significantly decreases with increasing bias voltage, which leads to the reduction of the signal voltage for the actual MRAM. A ferromagnetic double tunneling junction is proposed for the high density MRAM application demanding large signal voltage, because of the smaller degradation of the TMR for the bias voltage, compared with that of the conventional single junctions. Recent trials of MRAM fabrication are introduced, which demonstrates high-speed access time. Finally, challenges for the higher bit density MRAM above Gb are discussed, and it is noticed that higher signal voltage, lower power consumption for writing and novel cell designs are needed for the achievement.

A behavioral model for ferroelectric capacitors is developed. There are two requirements for the circuit simulation model; one is to reproduce the hysteretic behavior of the polarization under arbitrary voltage history, and the other is to describe the time dependence of polarization change. A parallel element model has been proposed to meet the first requirement. This model reproduces the minor loops of the hysteresis by assuming that the ferroelectric capacitor consists of the parallel capacitors of different polarization and coercive voltages. In order to add the function to describe the time dependence of the polarization change, we propose a method of measuring the switching response for individual parallel elements and the model which describes the response. In the measurement, the voltage applied to the capacitor is raised in two steps. After the first step, the voltage is kept at an intermediate level for a period of time, then raised again to the final level and the polarization change was recorded as a function of time. Because the capacitor elements with the coercive voltage lower than the intermediate level complete switching during the first step, the polarization change of the whole capacitor during the second step is attributed to the capacitor elements with the coercive voltage higher than the intermediate level. This procedure is repeated with changing the intermediate level, and the switching response of each capacitor element is obtained by taking the finite differences between the adjacent sets of data. The measurement on a sol-gel derived SrBi2Ta2O9 capacitor revealed that the switching time depended only on the difference between the applied voltage and the coercive voltage of each capacitor element. The time dependence of the polarization change is implemented to the model by inserting a nonlinear resistor in series with each capacitor, which reproduces the polarization switching under arbitrary voltage change without any fitting parameters.

A packet transmission delay is an important quality characteristic for various applications including real-time and data applications. In particular, it is necessary to investigate not only a whole distribution of the packet transmission delay, but also the tail part of the distribution, in order to detect the packet loss. In this paper, we analyze the characteristics of the tail part of packet delay distributions by statistical analytic approach. Our analytic results show that the Pareto distribution is most appropriate in 95-99.9% region of the cumulative distribution of packet transmission delays. Based on our statistical analysis, we next propose an adaptive playout control algorithm, which is suitable to real-time applications. Numerical examples show that our algorithm provides the stable packet loss ratio independently on traffic fluctuations.

A complex coefficient filter obtained by directly exchanging several reactance elements included in a real coefficient BPF for imaginary valued resistors is described. By using the proposed method, we obtain four varieties of complex coefficient filters. The stability problem is examined.

A signaling system for a single-track railroad has been specified in CafeOBJ. In this paper, we describe the specification of arbitrary two adjacent stations connected by a single line that is called a two-station system. The system consists of two stations, a railroad line (between the stations) that is also divided into some contiguous sections, signals and trains. Each object has been specified in terms of their behavior, and by composing the specifications with projection operations the whole specification has been described. A safety property that more than one train never enter a same section simultaneously has also been verified with CafeOBJ.

Access control plays an important role in the area of information security, which guarantees that any access to data is authorized. Hierarchical access control is a special access control model in distributed environment, in which each user protects his local data using a secret key; moreover, for any two related users ui and uj, ui can access uj's data if, and only if, ui's priority is higher than uj. Therefore, there should be a way for ui to obtain the secret key of uj if ui's priority is higher than uj. This paper presents an efficient solution to the problem. A special kind of function called secure filter is used as the building block of the proposed solution. In the solution, an authorized user can acquire correct keys efficiently and securely via secure filters. The proposed solution is also well-performed while inserting/deleting users, injecting/removing relations, and changing secret keys. Especially, only deleting users and removing relations will change some keys in the system, other operations can be performed freely without affecting other keys in the system; only secure filters need to be modified in these cases.

This paper describes a realtime 3D sound localization algorithm to be implemented with the use of a low power embedded DSP. A distinctive feature of this implementation approach is that the audible frequency band is divided into three, in accordance with the analysis of the sound reflection and diffraction effects through different media from a certain sound source to human ears. In the low, intermediate, and high frequency subbands, different schemes of the 3D sound localization are devised by means of an IIR filter, parametric equalizers, and a comb filter, respectively, so as to be run realtime on a low power embedded DSP. This algorithm aims at providing a listener with the 3D sound effects through headphones at low cost and low power consumption.

This paper focuses on the comparison of OFDM system channel estimation using time domain techniques and using frequency domain techniques. The channel model is based on the Taiwan DTV field-testing results, with static and dynamic multipath distortion. The simulation results prove that the channel estimation performance of the OFDM system in the time domain is better than in the frequency domain.

The chemical stability of the constituent elements in polycrystalline Sr-Bi-Ta-O thin film with various Bi content prepared by metalorganic chemical vapor deposition (MOCVD) was investigated by X-ray photoelectron spectroscopy (XPS). Moreover, that of the epitaxial films was also investigated to estimate the effect of the grain boundary in polycrystalline films. Therefore, only the Bi element drastically changed from Bi3+ state to Bi0 one by the Ar sputtering. This change increased with increasing the Ta/Bi mole ratio in the film from 0.64 to 1.67. This result was observed not only for the polycrystalline films but also for the epitaxial films, suggesting that this is the grain character not grain boundary one. The stability and the leakage character of the film strongly depend on the constituent of the film.

Our aim is to develop an intuitive sound designing interface for non-expert users. We propose editing sound by sound, which means using vocal mimicking as a "master" to transform the pitch and amplitude envelope. Our technique allows any user to easily and intuitively design sound because it requires no knowledge of acoustic features.

A 2-step deposition technique was introduced in the heteroepitaxial growth of barium titanate (BaTiO3) thin films. Heteroepitaxial BaTiO3 films were prepared on a SrRuO3/SrTiO3 substrate by radio frequency (RF) magnetron sputtering with three kinds of deposition method: low RF-power deposition, 2-step deposition, and high power deposition. The crystallographic and ferroelectric properties were evaluated for the heteroepitaxial films. When the epitaxial capacitor was prepared by the 2-step deposition technique, the ferroelectric remanent polarization, 2Pr, was maximized. The optimized deposition condition to improve the crystal quality is discussed in terms of damage and diffusion, which could be introduced into the oxide films during the epitaxial growth, and controlled by the RF-power and deposition time, respectively.

Epitaxial SrTiO3(STO) film on epitaxial (Ti,Al)N/Si(100) was successfully obtained using a Ti-buffer layer. The SrTiO3 film was (100) oriented and grew in parallel epitaxial relationship (cube-on-cube), i.e., (100)SrTiO3//(100)(Ti,Al)N//(100)Si, <110> SrTiO3//<110> (Ti,Al)N//<110> Si. The Ti-buffer layer was grown on (Ti,Al)N by magnetron sputtering, and the thickness of the buffer layer was 2-10 nm. After the STO film was sputtered, the Ti-buffer layer was changed to polycrystalline anatase-TiO2.

Linear discriminant analysis (LDA) is a basic tool of pattern recognition, and it is used in extensive fields, e.g. face identification. However, LDA is poor at adaptability since it is a batch type algorithm. To overcome this, new algorithms of online LDA are proposed in the present paper. In face identification task, it is experimentally shown that the new algorithms are about two times faster than the previously proposed algorithm in terms of the number of required examples, while the previous algorithm attains better final performance than the new algorithms after sufficient steps of learning. The meaning of new algorithms are also discussed theoretically, and they are suggested to be corresponding to combination of PCA and Mahalanobis distance.

We demonstrate all-optical clock recovery at 160 Gbit/s by injection locking of a 10 GHz mode-locked laser diode. Effective locking in a range of 10 MHz is observed for average input powers around -10 dBm. The timing jitter is analyzed for data rates between 10 Gbit/s and 160 Gbit/s. Beyond 40 Gbit/s, the high frequency timing jitter of the slave laser becomes of prime importance and has to be taken into account since it degrades the performance of a subsequent receiver. Increasing power penalties are found, especially beyond 80 Gbit/s.

The model to calculate high frequency C-V characteristics of ferroelectric capacitors that have not been modeled yet is presented. At first, P-V hysteresis model necessary to calculate C-V characteristics is improved by introducing two modification factors and by comparing with experimental results. Then, other parameters to express high frequency C-V characteristic of the metal/ferroelectric/metal structure are derived, in which the response for AC signal input is considered. Finally, it has been shown that these models predict well the C-V hysteresis shapes of the MFIS and the MFMIS structures.

To improve the throughput efficiencies of ARQ protocols over a high random packet-error channel, contiguous multiple copy-transmission (CMCT) strategy for which each packet is (re-)transmitted by sending its multiple copies in contiguous slots has been used so far. However, in burst error environments, all copies may be damaged in an error burst resultting the performance degradation of CMCT. To cope with this situation, we propose, in this paper, a new strategy called intermittent multiple copy-transmission (IMCT) whereby multiple copies are sent at a fixed interval. The throughput efficiency of go-back-N ARQ using CMCT or IMCT is analyzed and considered under a two-state Markov channel model expressing burst error property of a channel. As a result, it is shown that (i) the degree of improvement of throughput efficiency by CMCT or IMCT depends on the degree of error burst and (ii) the proposed IMCT can improve the throughput efficiency of go-back-N ARQ for high and burst error channels.