A novel depth perception control method for a monocular head-up display (HUD) in a car has been developed, which is called the dynamic perspective method. The method changes a size and a position of the HUD image such as arrow for depth perception and achieves a depth perception position of 120 [m] within an error of 30% in a simulation. However, it is difficult to achieve an accurate depth perception in the real world because of car vibration. To solve this problem, we focus on a property, namely, that people complement hidden images by previous continuously observed images. We hide the image on the HUD when the car is vibrated very much. We aim to point at the accurate depth position by using see-through HUD images while having users complement the hidden image positions based on the continuous images before car vibration. We developed a car that detects big vibration by an acceleration sensor and is equipped with our monocular HUD. Our new method pointed at the depth position more accurately than the previous method, which was confirmed by t-test.

In this letter, we present a novel interference-aware clustering scheme for cell broadcasting service. The proposed approach is based on a genetic algorithm for re-clustering. Using the genetic algorithm, the suggested method efficiently re-clusters the user nodes when the relays fail in receiving the cell broadcasting message from the base station. The simulation results exhibit that the proposed clustering scheme can maintain much higher capacity than the conventional clustering scheme in the cases of relay outage. The re-clustering method based on genetic algorithm also shows lower complexity than the re-clustering approach based on exhaustive search.

The objective of this research is to design a high-performance NAND flash memory system with a data buffer. The proposed buffer system in the NAND flash memory consists of two parts, i.e., a fully associative temporal buffer for temporal locality and a fully associative spatial buffer for spatial locality. We propose a new operating mechanism for reducing overhead of flash memory, that is, erase and write operations. According to our simulation results, the proposed buffer system can reduce the write and erase operations by about 73% and 79% for spec application respectively, compared with a fully associative buffer with two times more space. Futhermore, the average memory access time can improve by about 60% compared with other large buffer systems.

In this paper, we examine additive homomorphic encryptions in the discrete logarithm setting. Recently, Wang et al. proposed an additive homomorphic encryption scheme by modifying the ElGamal encryption scheme [Information Sciences 181(2011) 3308-3322]. We show that their scheme allows only limited number of additions among encrypted messages, which is different from what they claimed.

This paper proposes a robust bilateral filter which can handle mixed Gaussian and impulsive noise by hybridizing the conventional bilateral filter and the switching median filter. The effectiveness of the proposed method is verified in comparison with other conventional methods by some experiments using the natural digital images.

In this letter, by using Whiteman's generalized cyclotomy of order 2 over Zpq, where p, q are twin primes, we construct new perfect Gaussian integer sequences of period pq.

A mobile hotspot is a moving vehicle that hosts an Access Point (AP) such as train, bus and subway where users in these vehicles connect to external cellular network through AP to access their internet services. To meet Quality of Service (QoS) requirements, typically throughput and/or delay, a Call Admission Control (CAC) is needed to restrict the number of users accepted by the AP. In this paper, we analyze a modified guard channel scheme as CAC for mobile hotspot as follows: During a mobile hotspot is in the stop-state, we adopt a guard channel scheme where the optimal number of resource units is reserved for vertical handoff users from cellular network to WLAN. During a mobile hotspot is in the move-state, there are no handoff calls and so no resources for handoff calls are reserved in order to maximize the utility of the WLAN capacity. We model call's arrival and departure processes by Markov Modulated Poisson Process (MMPP) and then we model our CAC by 2-dimensional continuous time Markov chain (CTMC) for single traffic and 3-dimensional CTMC for two types of traffic. We solve steady-state probabilities by the Quasi-Birth and Death (QBD) method and we get various performance measures such as the new call blocking probabilities, the handoff call dropping probabilities and the channel utilizations. We compare our CAC with the conventional guard channel scheme which the number of guard resources is fixed all the time regardless of states of the mobile hotspot. Finally, we find the optimal threshold value on the amount of resources to be reserved for the handoff call subject to a strict constraint on the handoff call dropping probability.

Many EMD-type data hiding schemes have been proposed. However, the data hiding capacity is less than 2bpp when the embedding procedure uses formula operations. In order to improve the data hiding capacity from 1bpp to 4.5bpp, a new data hiding scheme is proposed in this paper based on a formula using the fully exploiting modification directions method (FEMD). By using our proposed theorem, the secret data can be embedded by formula operations directly without using a lookup matrix. The simulation results and performance analysis show the proposed scheme not only maintains good embedding capacity and stegoimage quality but also solves the overflow problem. It does so without using extra memory resources and performs within a reasonable computing time. The resource usage and capabilities of this scheme are well matched to the constraints and requirements of resource-scarce mobile devices.

In this paper, we propose a jointly optimized predictive-adaptive partitioned block transform to exploit the spatial characteristics of intra residuals and improve video coding performance. Under the assumptions of traditional Markov representations, the asymmetric discrete sine transform (ADST) can be combined with a discrete cosine transform (DCT) for video coding. In comparison, the interpolative Markov representation has a lower mean-square error for images or regions that have relatively high contrast, and is insensitive to changes in image statistics. Hence, we derive an even discrete sine transform (EDST) from the interpolative Markov model, and use a coding scheme to switch between EDST and DCT, depending on the prediction direction and boundary information. To obtain an implementation independent of multipliers, we also propose an orthogonal 4-point integer EDST, which consists solely of adds and bit-shifts. We implement our hybrid transform coding scheme within the H.264/AVC intra-mode framework. Experimental results show that the proposed scheme significantly outperforms standard DCT and ADST. It also greatly reduces the blocking artifacts typically observed around block edges, because the new transform is more adaptable to the characteristics of intra-prediction residuals.

Machine-to-Machine (M2M) communication is expected to grow in networks of the future, where massive numbers of low cost, low function M2M terminals communicate in many-to-many manner in an extremely mobile and dynamic environment. We propose a network architecture called Data-centric Network (DCN) where communication is done using a data identifier (ID) and the dynamic data registered by mobile terminals can be retrieved by specifying the data ID. DCN mitigates the problems of prior arts, which are large size of routing table and transaction load of name resolution service. DCN introduces concept of route attraction and aggregation in which the related routes are attracted to an aggregation point and aggregated to reduce routing table size, and route optimization in which optimized routes are established routes to reduce access transaction load to the aggregation points. These allow the proposed architecture to deal with ever increasing number of data and terminals with frequent mobility and changes in data.

Morphemes, which are obtained from morphological parsing, and statistical sub-words, which are derived from data-driven splitting, are commonly used as the recognition units for speech recognition of agglutinative languages. In this letter, we propose a discriminative approach to select the splitting result, which is more likely to improve the recognizer's performance, for each distinct word type. An objective function which involves the unigram language model (LM) probability and the count of misrecognized phones on the acoustic training data is defined and minimized. After determining the splitting result for each word in the text corpus, we select the frequent units to build a hybrid vocabulary including morphemes and statistical sub-words. Compared to a statistical sub-word based system, the hybrid system achieves 0.8% letter error rates (LERs) reduction on the test set.

Source routing multicast has been gathering much more attention rather than traditional IP multicast, since it is thought to be more scalable in terms of the number of groups at the cost of higher traffic loads. This paper introduces a mathematical framework to analyze the scalability of source routing multicast and IP multicast by leveraging previous multicast studies. We first analyze the amount of data traffic based on the small-world nature of networks, and show that source routing multicast can be as efficient as IP multicast if a simple header fragmentation technique (subgrouping) is utilized. We also analyze scalability in terms of group numbers, which are derived under the equal budget assumption. Our analysis shows that source routing multicast is competitive for low bit-rate streams, like those in the publish/subscribe service, but we find some factors that offset the advantage. This is the first work to analytically investigate the scalability of source routing multicast.

In tooth contour extraction there is insufficient intensity difference in x-ray images between the tooth and dental bone. This difference must be enhanced in order to improve the accuracy of tooth segmentation. This paper proposes a method to improve the intensity between the tooth and dental bone. This method consists of an estimation of tooth orientation (intensity projection, smoothing filter, and peak detection) and PCA-Stacked Gabor with ellipse Gabor banks. Tooth orientation estimation is performed to determine the angle of a single oriented tooth. PCA-Stacked Gabor with ellipse Gabor banks is then used, in particular to enhance the border between the tooth and dental bone. Finally, active contour extraction is performed in order to determine tooth contour. In the experiment, in comparison with the conventional active contour without edge (ACWE) method, the average mean square error (MSE) values of extracted tooth contour points are reduced from 26.93% and 16.02% to 19.07% and 13.42% for tooth x-ray type I and type H images, respectively.

This paper presents a VLSI design of a Tomlinson-Harashima (TH) precoder for multi-user MIMO (MU-MIMO) systems. The TH precoder consists of LQ decomposition (LQD), interference cancellation (IC), and weight coefficient multiplication (WCM) units. The LQ decomposition unit is based on an application specific instruction-set processor (ASIP) architecture with floating-point arithmetic for high accuracy operations. In the IC and WCM units with fixed-point arithmetic, the proposed architecture uses an arrayed pipeline structure to shorten a circuit critical path delay. The implementation result shows that the proposed architecture reduces circuit area and power consumption by 11% and 15%, respectively.

This paper introduces our developed noise robust speech communication techniques and describes its implementation to a smart info-media system, i.e., a small robot. Our designed speech communication system consists of automatic speech detection, recognition, and rejection. By using automatic speech detection and recognition, an observed speech waveform can be recognized without a manual trigger. In addition, using speech rejection, this system only accepts registered speech phrases and rejects any other words. In other words, although an arbitrary input speech waveform can be fed into this system and recognized, the system responds only to the registered speech phrases. The developed noise robust speech processing can reduce various noises in many environments. In addition to the design of noise robust speech recognition, the LSI design of this system has been introduced. By using the design of speech recognition application specific IC (ASIC), we can simultaneously realize low power consumption and real-time processing. This paper describes the LSI architecture of this system and its performances in some field experiments. In terms of current speech recognition accuracy, the system can realize 85-99% under 0-20dB SNR and echo environments.

In an orthogonal frequency division multiplexing (OFDM) communication system, two users use the same frequencies and number of sub-carriers so as to increase spectrum efficiency. When the codewords employed by them form a Golay complementary sequence (CS) mate, this system enjoys the upper bound of peak-to-mean envelope power ratio (PMEPR) as low as 4. This letter presents a construction method for producing S16-QAM and A16-QAM Golay CS mates, which arrives at the upper bound 4 of PMEPR. And when used as a Golay CS pair, they have an upper bound 2 of PMEPR, which is the same ones in both [18] and [17]. However, both cannot produce such mates.

This paper addresses the sensing-throughput tradeoff problem by using cluster-based cooperative spectrum sensing (CSS) schemes in two-layer hierarchical cognitive radio networks (CRNs) with soft data fusion. The problem is formulated as a combinatorial optimization problem involving both discrete and continuous variables. To simplify the solution, a reasonable weight fusion rule (WFR) is first optimized. Thus, the problem devolves into a constrained discrete optimization problem. In order to efficiently and effectively resolve this problem, a lexicographical approach is presented that solving two optimal subproblems consecutively. Moreover, for the first optimal subproblem, a closed-form solution is deduced, and an optimal clustering scheme (CS) is also presented for the second optimal subproblem. Numerical results show that the proposed approach achieves a satisfying performance and low complexity.

In this paper, a practical antenna selection (AS) scheme is investigated for downlink multiuser massive multiple input multiple output (MIMO) networks where a base station (BS) is equipped with many antennas (N) and communicates with K mobile stations (MSs) simultaneously. In the proposed antenna selection technique, S antennas (S≤N) are selected for transmission based on the knowledge of channel coefficients of each MS for reducing the number of RF chains which mainly induce cost increase in terms of size, hardware, and power. In the proposed AS technique, a BS first ranks antenna elements according to the sum of their channel gains to all MSs. Then, the BS computes the downlink sum-rate with S consecutive antenna elements in the ordered set, where the subset consisting of S consecutive antennas is called a window. The BS selects the window resulting in the highest sum-rate. The selected S antenna elements are used for transmitting signals to multiple users, while the remaining (N-S) antenna elements are turned off for the time slot. Therefore, the proposed AS technique requires only (N-S+1) sum-rate computations, while the optimal AS technique involves $inom{N}{S}$ computations. We analyze downlink sum-rate with the proposed AS technique and compare it with that of a reference system with the same number of antenna elements without AS. Our results show that the proposed AS technique significantly outperforms the reference scheme.

In this paper, we briefly review the scheme of counting statistics, in which a probability of the number of monitored or target transitions in a Markov jump process is evaluated. It is generally easy to construct a master equation for the Markov jump process, and the counting statistics enables us to straightforwardly obtain basic equations of the counting statistics from the master equation; the basic equation is used to calculate the cumulant generating function of the probability of the number of target transitions. For stationary cases, the probability is evaluated from the eigenvalue analysis. As for the nonstationary cases, we review a numerical integration scheme to calculate the statistics of the number of transitions.

We have studied photo-induced effects in a p-type transistor based on a [1]benzothieno[3,2-b]benzothiophene (BTBT) derivative. Repetition of blue light irradiation and electrical characterization under dark reveals that its threshold voltage gradually shifts in the positive direction as the cumulative exposure time increases. This shift is slowly reversed when the transistor is stored under dark. The onset voltage defined as the gate bias at which the sub-threshold current exceeds a certain level behaves in a similar manner. Mobility remains more or less the same during this exposure period and the storage period. Time evolution of the threshold voltage shift is fit by a model assuming two charged meta-stable states decaying independently. A set of parameters consists of a decay constant for each state and the ratio of the two states. A single parameter set reproduces the positive shift during the exposure period and the negative shift during the storage period. Time evolution of the onset voltage is reproduced by the same parameter set. We have also studied photo-induced effects in two types of n-type transistors where either a pure solution of a perylene derivative or a solution mixed with an insulating polymer is used for printing each semiconductor layer. A similar behavior is observed for these transistors: blue light irradiation under a negative gate bias shifts the threshold and the onset voltages in the negative direction and these shifts are reversed under dark. The two-component model reproduces the behavior of these voltage shifts and the parameter set is slightly different among the two transistors made from different semiconductor solutions. The onset voltage shift is well correlated to the threshold voltage shift for the three types of organic transistors studied here. The onset voltage is more sensitive to illumination than the threshold voltage and its sensitivity differs among transistors.