Mode-by-mode impulse responses, or spectral transfer matrix (STM) of birefringent fibers are measured by using linear optical sampling, with assist of polarization multiplexed probe pulse. By using the eigenvalue analysis of the STM, the differential mode delay and PMD vector of polarization-maintaining fiber are analyzed as a function of optical frequency over 1THz. We show that the amplitude averaging of the complex impulse responses is effective for enhancing the signal-to-noise ratio of the measurement, resulting in improving the accuracy and expanding the bandwidth of the measurement.

Sketch face recognition is to match sketch face images to photo face images. The main challenge of sketch face recognition is learning discriminative feature representations to ensure intra-class compactness and inter-class separability. However, traditional sketch face recognition methods encouraged samples with the same identity to get closer, and samples with different identities to be further, and these methods did not consider the intra-class compactness of samples. In this paper, we propose triplet-margin-center loss to cope with the above problem by combining the triplet loss and center loss. The triplet-margin-center loss can enlarge the distance of inter-class samples and reduce intra-class sample variations simultaneously, and improve intra-class compactness. Moreover, the triplet-margin-center loss applies a hard triplet sample selection strategy. It aims to effectively select hard samples to avoid unstable training phase and slow converges. With our approach, the samples from photos and from sketches taken from the same identity are closer, and samples from photos and sketches come from different identities are further in the projected space. In extensive experiments and comparisons with the state-of-the-art methods, our approach achieves marked improvements in most cases.

The machine-to-machine (M2M) service network platform that accommodates and controls various types of Internet of Things devices has been presented. This paper investigates program file placement strategies for the M2M service network platform that achieve low blocking ratios of new task requests and accommodate as many tasks as possible in the dynamic scenario. We present four strategies for determining program file placement, which differ in the computation method and whether the relocation of program files being used by existing tasks is allowed or not. Simulation results show that a strategy based on solving a mixed-integer linear programming model achieves the lowest blocking ratio, but a heuristic algorithm-based strategy can be an attractive option by allowing recomputation of the placement when the placement cannot be obtained at the timing of new task request arrival.

This paper proposes two algorithms, namely Server-User Matching (SUM) algorithm and Extended Server-User Matching (ESUM) algorithm, for the distributed server allocation problem. The server allocation problem is to determine the matching between servers and users to minimize the maximum delay, which is the maximum time to complete user synchronization. We analyze the computational time complexity. We prove that the SUM algorithm obtains the optimal solutions in polynomial time for the special case that all server-server delay values are the same and constant. We provide the upper and lower bounds when the SUM algorithm is applied to the general server allocation problem. We show that the ESUM algorithm is a fixed-parameter tractable algorithm that can attain the optimal solution for the server allocation problem parameterized by the number of servers. Numerical results show that the computation time of ESUM follows the analyzed complexity while the ESUM algorithm outperforms the approach of integer linear programming solved by our examined solver.

With the widespread popularity of a large number of social platforms, an increasing number of new words gradually appear. However, such new words have made some NLP tasks like word segmentation more challenging. Therefore, new word detection is always an important and tough task in NLP. This paper aims to extract new words using the BiLSTM+CRF model which added some features selected by us. These features include word length, part of speech (POS), contextual entropy and degree of word coagulation. Comparing to the traditional new word detection methods, our method can use both the features extracted by the model and the features we select to find new words. Experimental results demonstrate that our model can perform better compared to the benchmark models.

Recently, intelligent heating, next generation microwave ovens that achieve uniform heating and spot heating using solid-state devices, has been actively studied. There are two types of microwave generators using solid-state devices. Since compactness is indispensable to accommodate in a limited space, the miniaturized oscillator type was selected. The authors proposed an imbalanced coupling resonator, a resonator-less feedback circuit, a high power frequency variable resonator, and injection-locked phase control in order to achieve high performance of the oscillator type microwave generator. In addition, we confirmed that the oscillator type can be used as the microwave generator for intelligent heating using a Wilkinson combiner. As a result, it was demonstrated that the oscillator type microwave generator, realized the same high efficiency (67%) as the amplifier type, and found the possibility of variable frequency (2.4 to 2.5GHz) and variable phase, and can be used as the microwave generator for intelligent heating.

One of key technologies in the fifth generation mobile communications is a distributed antenna system (DAS). As DAS creates tightly packed antenna arrangements, inter-user interference degrades its spectrum efficiency. Round-robin (RR) scheduling is known as a scheme that achieves a good trade-off between computational complexity and spectrum efficiency. This paper proposes a user equipment (UE) allocation scheme for RR scheduling. The proposed scheme offers low complexity as the phase of UE allocation sequences are predetermined. Four different phase selection criteria are compared in this paper. Numerical results obtained through computer simulation show that maximum selection, which sequentially searches for the phase with the maximum tentative throughput realizes the best spectrum efficiency next to full search. There is an optimum number of UEs which obtains the largest throughput in single-user allocation while the system throughput improves as the number of UEs increases in 2-user RR scheduling.

Hadoop is a popular data-analytics platform based on Google's MapReduce programming model. Hard-disk drives (HDDs) are generally used in big-data analysis, and the effectiveness of the Hadoop platform can be optimized by enhancing its I/O performance. HDD performance varies depending on whether the data are stored in the inner or outer disk zones. This paper proposes a method that utilizes the knowledge of job characteristics to realize efficient data storage in HDDs, which in turn, helps improve Hadoop performance. Per the proposed method, job files that need to be frequently accessed are stored in outer disk tracks which are capable of facilitating sequential-access speeds that are higher than those provided by inner tracks. Thus, the proposed method stores temporary and permanent files in the outer and inner zones, respectively, thereby facilitating fast access to frequently required data. Results of performance evaluation demonstrate that the proposed method improves Hadoop performance by 15.4% when compared to normal cases when file placement is not used. Additionally, the proposed method outperforms a previously proposed placement approach by 11.1%.

Vehicle logo detection technology is one of the research directions in the application of intelligent transportation systems. It is an important extension of detection technology based on license plates and motorcycle types. A vehicle logo is characterized by uniqueness, conspicuousness, and diversity. Therefore, thorough research is important in theory and application. Although there are some related works for object detection, most of them cannot achieve real-time detection for different scenes. Meanwhile, some real-time detection methods of single-stage have performed poorly in the object detection of small sizes. In order to solve the problem that the training samples are scarce, our work in this paper is improved by constructing the data of a vehicle logo (VLD-45-S), multi-stage pre-training, multi-scale prediction, feature fusion between deeper with shallow layer, dimension clustering of the bounding box, and multi-scale detection training. On the basis of keeping speed, this article improves the detection precision of the vehicle logo. The generalization of the detection model and anti-interference capability in real scenes are optimized by data enrichment. Experimental results show that the accuracy and speed of the detection algorithm are improved for the object of small sizes.

In this paper, we propose a radio frequency (RF) anti-aliasing filter design method considering the effect of a roll-off characteristic on a noise figure (NF) in the direct RF undersampling receiver. The proposed method is useful for broadband reception that a system bandwidth (BW) has nearly half of the sampling frequency (1/2 fs). When the system BW is extended nearly 1/2 fs, the roll-off band is out of the desired Nyquist zone and it affects NF additionally. The proposed method offers a design target regarding the roll-off characteristic not only the rejection ratio. The target is helpful as a design guide to meet the allowed NF. We design the filter based on the proposed method and it is applied to the direct RF undersampling on-board receiver for Ka-band high throughput satellite (HTS). The measured NF value of the implemented receiver almost matched the designed value. Moreover, the receiver achieved the reception bandwidth which is 90% of 1/2 fs.

This paper proposes a deterministic pilot pattern placement optimization scheme based on the quantum genetic algorithm (QGA) which aims to improve the performance of sparse channel estimation in orthogonal frequency division multiplexing (OFDM) systems. By minimizing the mutual incoherence property (MIP) of the sensing matrix, the pilot pattern placement optimization is modeled as the solution of a combinatorial optimization problem. QGA is used to solve the optimization problem and generate optimized pilot pattern that can effectively avoid local optima traps. The simulation results demonstrate that the proposed method can generate a sensing matrix with a smaller MIP than a random search or the genetic algorithm (GA), and the optimized pilot pattern performs well for sparse channel estimation in OFDM systems.

In this paper, we propose a notion for high-dimensional generalizations of mutually orthogonal Latin squares (MOLS) and mutually orthogonal diagonal Latin squares (MODLS), called mutually dimensionally orthogonal d-cubes (MOC) and mutually dimensionally orthogonal diagonal d-cubes (MODC). Systematic constructions for MOC and MODC by using polynomials over finite fields are investigated. In particular, for 3-dimensional cubes, the results for the maximum possible number of MODC are improved by adopting the proposed construction.

We aim at HDR imaging with simple processing while preventing spatial resolution degradation in multiple-exposure-time image sensor where the exposure time is controlled for each pixel. The contributions are the proposal of image interpolation by motion area detection and pixel adaptive weighting method by overexposure and motion blur detection.

This paper presents analysis results of the intermodulation distortion (IMD) components compensation conditions for dual-band feed-forward power amplifier (FFPA) when inputting dual-band signals simultaneously. The signal cancellation loop and distortion cancellation loop of the dual-band FFPA have frequency selective adjustment paths which consist of filter and vector regulator. The filter selects the desired frequency component and suppresses the undesired frequency component in the desired frequency selective adjustment path. The vector regulators repeatedly adjust the amplitude and phase values of the composite components for the desired and suppressed undesired frequency components. In this configuration, the cancellation levels of the signal cancellation loop and distortion cancellation loop are depending on the amplitude and phase errors of the vector regulator. The analysis results show that the amplitude and phase errors of the desired frequency component almost become independent that of the undesired frequency component in a weak non-linearity condition, when the isolation between the desired band and the undesired band given by the filter is more than 40 dB. The amplitude errors of the desired frequency component are dependent on that of the undesired frequency component in a strong non-linear conditions when the isolation level sets as above. A 1-W-class signal cancellation loop and 20-W-class FFPA are fabricated for 1.7-GHz and 2.1-GHz bands simultaneous operation. The experimental results show that the analysis results are suitable in the experimental conditions. From these investigations, the analysis results can provide a commercially available dual-band FFPA. To our best knowledge, this is first analysis results for the dual-band FFPA.

Recently, we demonstrated a rapid-single-flux-quantum NOT gate comprising a toggle storage loop. In this paper, we present our design and operation of a NOR gate that is a straightforward extension of the NOT gate by attaching a confluence buffer. Parameter margins wider than ±28% were confirmed in simulation. Functional tests using Nb integrated circuits demonstrated correct NOR operation with a bias margin of ±21%.

This paper presents a large-angle imaging algorithm based on a dynamic scattering model for inverse synthetic aperture radar (ISAR). In this way, more information can be presented in an ISAR image than an ordinary RD image. The proposed model describes the scattering characteristics of ISAR target varying with different observation angles. Based on this model, feature points in each sub-image of the ISAR targets are extracted and matched using the scale-invariant feature transform (SIFT) and random sample consensus (RANSAC) algorithms. Using these feature points, high-precision rotation angles are obtained via joint estimation, which makes it possible to achieve a large angle imaging using the back-projection algorithm. Simulation results verifies the validity of the proposed method.

Speech enhancement has been proposed to reduce the impulsive noise whose frequency characteristic is wideband. On the other hand, it is challenging to reduce the ringing sound, which is narrowband in impulsive noise. Therefore, we propose the modeling of the ringing sound and its estimation by a linear predictor (LP). However, it is difficult to estimate the ringing sound only in noisy speech due to the auto-correlation property of speech. The proposed system adopts the 4th order moment-based adaptive algorithm by noticing the difference between the 4th order statistics of speech and impulsive noise. The brief analysis and simulation results show that the proposed system has the potential to reduce ringing sound while keeping the quality of enhanced speech.

In this study, the transient characteristics on the super-steep subthreshold slope (SS) of a PN-body tied (PNBT) silicon-on-insulator field-effect transistor (SOI-FET) were investigated using technology computer-aided design and pulse measurements. Carrier charging effects were observed on the super-steep SS PNBT SOI-FET. It was found that the turn-on delay time decreased to nearly zero when the gate overdrive-voltage was set to 0.1-0.15 V. Additionally, optimizing the gate width improved the turn-on delay. This has positive implications for the low speed problems of this device. However, long-term leakage current flows on turn-off. The carrier lifetime affects the leakage current, and the device parameters must be optimized to realize both a high on/off ratio and high-speed operation.

In this paper, we propose a user-assisted QoS control scheme that utilizes media adaptive buffering to enhance QoE of audiovisual and haptic IP communications. The scheme consists of two modes: a manual mode and an automatic mode. It enables users to switch between these two modes according to their inclinations. We compare four QoS control schemes: the manual mode only, the automatic mode only, the switching scheme starting with the manual mode, and the switching scheme starting with the automatic mode. We assess the effects of the four schemes, user attributes, and tasks on QoE through a subjective experiment which provides information on users' behavior in addition to QoE scores. As a result of the experiment, we show that the user-assisted QoS control scheme can enhance QoE. Furthermore, we notice that the proper QoS control scheme depends on user attributes and tasks.

In this paper, we propose a decentralized probabilistic frequency-block activation control method for the cellular downlink. The aim of the proposed method is to increase the downlink system throughput within the system coverage by adaptively controlling the individual activation of each frequency block at all base stations (BSs) to achieve inter-cell interference coordination (ICIC) and traffic load balancing. The proposed method does not rely on complicated inter-BS cooperation. It uses only the inter-BS information exchange regarding the observed system throughput levels with the neighboring BSs. Based on the shared temporal system throughput information, each BS independently controls online the activation of their respective frequency blocks in a probabilistic manner, which autonomously achieves ICIC and load balancing among BSs. Simulation results show that the proposed method achieves greater system throughput and a faster convergence rate than the conventional online probabilistic activation/deactivation control method. We also show that the proposed method successfully tracks dynamic changes in the user distribution generated due to mobility.