A new type of triple-band antenna is introduced by combing a tab monopole antenna (TMA) and a planar inverted F antenna (PIFA). The antenna configuration is shown to operate at three discrete frequencies: GSM 900, GSM 1800 (DCS) and GSM 1900 (PCS). The performance of an antenna is presented as well as the results of the computer simulations with a software package based on the Finite Element Method. The simulated results with the real antenna's experimental results. The advantage of the design suggested in this paper is its simplicity of manufacturing and low cost.

A voltage-mode universal biquadratic filter using single current-feedback amplifier (CFA), two capacitors and three resistors is presented. The new circuit has four inputs and one output and can realize all the standard filter functions, that is, lowpass, bandpass, highpass, notch and allpass filters, without changing the circuit topology. The use of only one current-feedback amplifier simplifiers the configuration.

In SoC (system-on-a-chip) design, interfacing among IP (Intellectual Property) blocks is one of the most important issues. Since most IP's are provided by different vendors, they generally have different interface schemes and different operating frequencies. In this paper, we propose a new interface synthesis method with two features: 1) generation of the interface between IP's with different operating frequencies, and 2) minimization of the hardware resource required for the interface. We have demonstrated the proposed algorithm through its application to an MP3 decoder design example, where the IIS (Inter-IC Sound)-to-PCI (Peripheral Component Interconnect) protocol converter was successfully implemented using the proposed method.

This paper presents the performance modeling, analysis, and simulation of SIP-T (Session Initiation Protocol for Telephones) signaling system in carrier class packet telephony network for NGN (Next Generation Networks). Until recently, fone of the greatest challenges in the migration from existing PSTN (Public Switched Telephone Network) toward NGN is to build a carrier class packet telephony network that preserves the ubiquity, quality, and reliability of PSTN services while allowing the greatest flexibility for use of new packet telephony technology. The SIP-T signaling system defined in IETF (Internet Engineering Task Force) draft is a mechanism that uses SIP (Session Initiation Protocol) to facilitate the interconnection of PSTN with carrier class packet telephony network. Based on IETF, the SIP-T signaling system not only promises scalability, flexibility, and interoperability with PSTN but also provides call control function of MGC (Media Gateway Controller) to set up, tear down, and manage VoIP (Voice over IP) calls in carrier class packet telephony network. In this paper, we derive the buffer size, the mean of queueing delay, and the variance of queueing delay of SIP-T signaling system that are the major performance evaluation parameters for improving QoS (Quality of Service) and system performance of MGC in carrier class packet telephony network focused on toll by-pass or tandem by-pass of PSTN. First, we assume a mathematical model of the M/G/1 queue with non-preemptive priority assignment to represent SIP-T signaling system. Second, we derive the formulas of buffer size, queueing delay, and delay variation for the non-preemptive priority queue by queueing theory respectively. Besides, some numerical examples of buffer size, queueing delay, and delay variation are presented as well. Finally, the theoretical estimates are shown to be in excellent consistence with simulation results.

In this paper, we implemented practical resource adaptation mechanism for broadband application environment especially suitable for portable computers (note PCs) with limited power supply. Continuous development of portability enhancement and increasing computation with less power consumption for battery operating environment in note PC equips with intelligent resource controlling mechanism embedded inside the hardware. In such environment, where occasional environmental changes take in place rapidly, adaptive and collaborative controls of resources are required. Optimization of resource based on power supply management is dedicated to the operating environment. Bi-directional, user, application, operating system and device aware interface for resource configuration/management is extended to the current Unix operating system by implementing application programming interface of Advanced Configuration and Power Interface (ACPI). Traditional operating system conceals the active device probing and controlling method autonomously. Implementation of "State handler daemon" interface enables applications and application users to monitor and adapt the resources available during the operation. Thick collaboration between application and devices that are reserved in its limited environments economizes the consuming device utilization resulting: for example, life extension of battery life and effective network bandwidth adaptation. We focused on DVTS (Digital Video Transport System) as a typical broadband application. Evaluation shows 125 minutes of continuous battery operation with battery life extension compared to 70 minutes with traditional systems. Collaboration with network device management enables 100% packet transfer compared to 89% without any Resource adaptations.

The cutoff filter and circular window are critically important elements of circular waveguide TE11 mode transmission systems, but no detailed analysis of their characteristics has yet been undertaken. In order to gain a detailed understanding of return loss and other frequency characteristics, one must analyze the electromagnetic (E-M) fields in the waveguide cavity to the cutoff domain and higher mode oscillations. In this work we present a theoretical analysis employing a method in which E-M fields are represented in the form of transmission equations, and show that the results are in remarkably close agreement with experimental results obtained from a prototype device. It is also demonstrated that the results obtained by the proposed method are far more accurate than those obtained using conventional approximation theory.

The format conversion operations between a floating-point number and an integer number and a round operation are the important standard floating-point operations. In most cases, these operations are implemented by adding additional hardware to the floating-point adder. The SR (simultaneous rounding) method, one of the techniques used to improve the performance of the floating-point adder, can perform addition and rounding operations at the same stage and is an efficient method with respect to the silicon area and its performance. In this paper, a hardware model to execute CRops (conversion and rounding operations) for the SR floating-point adder is presented and CRops are analyzed on the proposed hardware model. Implementation details are also discussed. The proposed scheme can maintain the advantages of the SR method and can perform each CRop with three pipeline stages.

In this letter we present a new way for computing generalized eigenvalue problems in engineering applications. To transform a generalized eigenvalue problem into an associated problem for solving nonlinear dynamic equations by using optimization techniques, we can determine all eigenvalues and their eigenvectors for general complex matrices. Numerical examples are given to verify the formula of dynamic equations.

Since the penetration of VSAT services is rapidly increasing, more earth stations will operate around airports than is currently true. This makes it essential to evaluate accurately and efficiently the impairment of received signals due to blockage by aircraft. This paper proposes developing an aircraft model using a thin, planar polygon to represent the aircraft projection and to apply GTD with corner diffraction terms. The effectiveness and applicability of the method is then examined numerically. It is demonstrated that the results measured in the Ku-band around two airports are a good match with the numerical simulations even when the distance between the aircraft and the stations is small.

To classify the significant wavelet coefficients into edge area and noise area, a morphological clustering filter applied to wavelet shrinkage is introduced. New methods for wavelet shrinkage using morphological clustering filter are used in noise removal, and the performance is evaluated under various noise conditions.

This paper investigates the stochastic property of packet destinations in order to describe Internet access patterns. If we assume a sort of stationary condition for the address generation process, the process is an LRU stack model. Although the LRU stack model gives appropriate descriptions of address generation on a medium/long time-scale, address sequences generated from the LRU stack model do not reproduce Zipf-type distributions, which appear frequently in Internet access patterns. This implies that the address generation behavior on a short time-scale has a strong influence on the shape of the distributions that describe frequency of address appearances. This paper proposes an address generation algorithm that does not meet the stationary condition on the short time-scale, but restores it on the medium/long time-scale, and shows that the proposed algorithm reproduces Zipf-type distributions.

The Fat-Btree which is a new parallel B-tree structure has been proposed to improve the access performance of shared-nothing parallel database systems. Since the Fat-Btree has only a part of index nodes on each processing element, it can reduce the synchronization cost in update operations. For these reasons, both retrieval and update operations can be processed at high throughput compared to previously proposed parallel B-tree structures for shared-nothing computers. Though we tried to apply some conventional concurrency control methods to the Fat-Btree, e.g., B-OPT and ARIES/IM, which were designed for shared-everything machines, we found that these methods are not always appropriate for the Fat-Btree. In this paper, it is shown that the conventional methods are not suitable for the Fat-Btree and other parallel B-trees. We propose a new deadlock free concurrency control protocol, named INC-OPT, to improve the performance of the Fat-Btree more effectively than the B-OPT and ARIES/IM. Furthermore, in order to prove that the Fat-Btree provides the impact on the performance of shared-nothing parallel databases, we compare the real performance of three types of parallel B-tree structures, Fat-Btree, Copy-Whole-Btree, and Single-Index-Btree, on an nCUBE3 machine where the INC-OPT is applied.

We describe a method of compensating temperature fluctuation by a linear-time-warping processing in a sound reproduction system. This technique is applied to impulse responses of room transfer functions, to achieve a high-quality sound reproduction system, particularly one that treats high-frequency components. First, the impulse responses are measured before and after temperature fluctuation, and the former are converted to the latter by the proposed process. Next, we design inverse filters for the system, and evaluate the improvement of the reproduction accuracy and spectrum distortion. By the compensation method, we can improve the reproduction accuracy at any frequency. Moreover, we propose an adaptive algorithm for the estimation of a suitable warping ratio, using the observed signal of reproduced sound obtained at only one control point. Using the proposed algorithm, we can improve the reproduction accuracy at each control point by about 14 dB, in which a difference in temperature is 1.4.

Hypercomplex coefficient digital filters provide several attractive advantages such as compact realization with reduced system order, inherent parallelism. However, they also possess a drawback in that a multiplier requires a large amount of computations. This paper proposes a computationally efficient implementation of digital filters whose coefficient is a type of hypercomplex number; a bicomplex number. By decomposing a bicomplex multiplier into two parallel complex multipliers, we show that hypercomplex digital filters can be implemented as two parallel complex digital filters. The proposed implementation offers more than a 60% reduction in the count of real multipliers.

A sound localization method based on the adaptive estimation of inverse Ear Canal Transfer Functions (ECTFs) using a stereo earphone-microphone combination is proposed. This method can adaptively obtain the individual's transfer functions to fit the listener in real-time. We evaluate our sound localization method by studying the relationship between the estimation error of inverse ECTFs and the auditory sound localization score perceived by several listener. As a result, we clarified that the estimation error required of inverse ECTFs are less than -10 dB. In addition, we describe two adaptive inverse filtering methods in order to realize real-time signal processing implementation using affine projection algorithm and discusses the convergence time of an adaptive inverse filter to determine the initial value. It is clarified that method 2 based on copy weights with initial value is more effective than method 1 with filtered-x algorithm, in terms of convergence, if the initial value is the average of many listeners' impulse responses for our sound localization method.

A low-power-consumption 6-bit pipelined analog-to-digital converter for use in a BluetoothTM RF transceiver has been developed. The RF transceiver chip was fabricated using a 0.35-µm BiCMOS process, and the A/D converter is based on CMOS technology for digital logic. To reduce the power consumption of the converter, we used a look-ahead pipeline architecture to reduce the required settling time of an amplifier in the critical path of the converter. We show that through this reduction, amplifier power consumption of 600 µA can be reduced to 250 µA to achieve a 13-MHz conversion rate. We have also developed a low-power two-capacitor switched-capacitor common-mode feedback circuit which enables an offset cancellation of an amplifier during the reset phase. Offset cancellation is used in each stage of the S/H amplifier to reduce the overall offset of the converter. It achieves an effective number of bits of 5.7 at a conversion rate of 13 Msps and 5.0 at 26 Msps. The residual offset of the converter is only 4 mV. It has a low total current consumption of 3.2 mA at 13 Msps and a supply voltage of 2.8 V.

This paper describes an effective technique for coding QCIF video sequences based on a JPEG2000 codec. In the proposed method, multiple frames are combined into one large picture. The larger picture enables images to be coded more efficiently. Image quality is further improved by combining the frames symmetrically. The video sequence is efficiently coded by adapting the time correlation of the video sequences to spatial correlation. We demonstrated the effectiveness of this method by encoding QCIF video sequences using JPEG2000.

Software with design flaws increases maintenance costs, decreases component reuse, and reduces software life. Even well-designed software tends to deteriorate with time as it undergoes maintenance. Work on restructuring object-oriented designs involves estimating the quality of the designs using metrics, and automating transformations that preserve the behavior of the designs. However, these factors have been treated almost independently of each other. A long-term goal is to define transformations preserving the behavior of object-oriented designs, and automate the transformations using metrics. In this paper, we describe a genetic algorithm based restructuring approach using metrics to automatically modify object-oriented designs. Cohesion and coupling metrics based on abstract models are defined to quantify designs and provide criteria for comparing alternative designs. The abstract models include a call-use graph and a class-association graph that represent methods, attributes, classes, and their relationships. The metrics include cohesion, inheritance coupling, and interaction coupling based on the behavioral similarity between methods extracted from the models. We define restructuring operations, and show that the operations preserve the behavior of object-oriented designs. We also devise a fitness function using cohesion and coupling metrics, and automatically restructure object-oriented designs by applying a genetic algorithm using the fitness function.

This paper presents a comparison of the throughput performance employing hybrid automatic repeat request (HARQ) with packet combining, such as Type-I with packet combining (simply Chase combining hereafter) and Type-II (Incremental redundancy hereafter), using turbo coding in a multipath fading channel in high speed downlink packet access (HSDPA). We apply a multipath interference canceller (MPIC) to remove the influence of severe multipath interference. Link level simulation results show that the maximum throughput using Incremental redundancy with 64QAM is improved by approximately 5-8% compared to that using Chase combining, and that the required average received signal energy of 12 code channels per chip-to-background noise spectrum density (Ec/N0) at the throughput of 4 Mbps with Incremental redundancy is decreased by approximately 1.0 dB rather than that with Chase combining when the vehicular speed is higher than approximately 30 km/h. Furthermore, we elucidate based on the system level simulation that although no improvement is obtained in a slow mobility environment such as the average vehicular speed of 3 km/h, the achieved throughput of Incremental redundancy is increased by approximately 5-6% and 13% for the average vehicular speed of 30 km/h and 120 km/h, respectively, compared to that with Chase combining.

In order to clarify the receiver sensitivity of remote keyless entry systems operating at 314 MHz, the radiation characteristics of a cabin antennas must be studied. For this purpose, electromagnetic simulations are very useful but the multiple reflected waves present in the cabin must be accurately estimated. No prior study examined the radiation characteristics of cabin antennas. This paper introduces an accurate simulation method. A MM (Method of Moments) simulator is selected because it can simulate multiple reflected waves. Initial studies are being performed to find the calculation requirements and ensuring convergence of multiple reflected wave structures. Next, calculation requirements for car analyses such as convergence parameters and computer abilities are studied. The calculation time is 11 hours by a personal computer. 1.1 GB of RAM is also needed. Many calculated results such as three-dimensional radiation patterns and induced currents on the car's body are obtained. The radiation pattern varies with antenna position, and polarization changes are shown. In order to ensure that the results are accurate, measurements are made on a one seventh scale model of a car. The good agreement of measured and calculated results verifies the validity of the simulation method. The influence of multiple reflected waves on the radiation patterns is also experimentally studied. The conclusion is that the MM method is shown to be useful in estimating the radiation pattern of cabin antennas. Interesting calculation results are also shown.