The threshold voltage of Coulomb staircase using organic molecules was analyzed by extending our previous model with only consideration of the metal/organic film interfacial space charge to the generalized one. The generalized model is helpful to examine coupling capacitance in organic double barrier tunneling junction (DBTJ). The current-voltage (I-V) characteristic of metal/polyimide (PI)/rhodamine-dendrimer (Rh-G2)/PI/metal junction was analyzed using this generalized model. The calculation results were in good agreement with our experimental data.

Compared with much research in the spatial-domain and transform-domain watermarking techniques, VQ-based watermarking technique has not been fully treated. A digital image watermarking scheme based on vector quantisation (VQ) is proposed to improve the degree of spreading watermark information. By partitioning the codebook into 3 groups, the scheme tries to embed one binary information for each block. The scheme spreads the watermark information almost evenly over the image with little extra distortion. The experimental results prove the efficiency and effectiveness of the scheme.

This paper presents the full wave analysis of a microwave amplifier by the extended finite difference time domain method. The device-wave interaction is characterized and incorporated into the FDTD time-marching scheme. The equivalent current source is used to model the amplifier and all the electric field components at the active sheet are updated by FDTD. Central-difference approximation is used to discretize a set of state equations. The results obtained by the present method show good agreement with those of the frequency domain circuit analysis and serenade v8.5.

We have developed a 22 digital optical switch (DOS) composed of four 12 DOS elements and a thermo-optic wavelength tunable filter using silicone resin waveguides. The 22 DOS operated with a switching power of 380 mW, a very low crosstalk of less than -60 dB, and a low insertion loss of less than 2.5 dB at 1.55 µm. We have also developed two types of polymer thermo-optic wavelength tunable filter with a pair of triangular phase shifters. One filter is designed for a large-scale WDM system (32 channels, 0.8 nm spacing) and the other for a small-scale WDM system (10 channels, 0.8 nm spacing). We optimized the arrayed waveguide number, reducing the operating power required by these filters. Moreover, they both operated with a low crosstalk of < -25 dB.

A DC-DC converter using two transformers is proposed. One transformer delivers the energy to a load when a switch is on and the other transfers the flyback energy to a load when a switch is off. The primary windings of the two transformers function as choke inductance alternately, and thus the output voltage control by means of the duty ratio and the zero-voltage-switching are possible without an additional inductor. The breadboarded prototypes of the single output and the two outputs have confirmed the principles of operation and demonstrated the high conversion efficiency.

The rapid growth of state space in a two-dimensional (2D) random walk model imposes heavy computational load on mobility analysis of personal communication services (PCS) networks. This letter presents a novel random walk model with a compact state space by exploiting the symmetry of cellular patterns in a K-layer cluster of cells. The size of the state space is reduced to (K+1)/2(K/2+1)+1, with an asymptotic compression ratio of 12.

In an Multi-Protocol Label Switching (MPLS) network domain, Asynchronous Transfer Mode--Label Switch Routers (ATM-LSRs) are considered the best candidate for providing the highest forwarding capability. ATM-LSRs implement a VC-merging scheme that allows many IP routes to be mapped into the same VPI/VCI label, hence supporting scalability. The VC-merging requires reassembly buffers to reconstruct an original packet from its segmented but interleaved AAL-5 cells. In this paper, we analyze the performance of an ATM-LSR with partial VC-merging capability and investigate the impact of VC-merging on the requirement of the reassembly and output buffer. The numerical computation complexity of the mathematical analysis can be reduced from O(M4) to O(M2), where M is the total number of ON-OFF sources. We also propose a closed-form equation, which approximates the distribution of the output buffer with satisfactory accuracy. Numerical results show that when incoming cells are severely interleaved, the VC-merging needs the reassembly buffer size to be of the same order as the output buffer size, which cannot be ignored.

This letter presents a code which corrects single bit errors in any location of the word as well as l-bit burst errors occurred in an important part of the word. The proposed code is designed by product of the parity check matrix of the l-bit burst error correcting codes and the matrix which converts input unequal errors into equal errors. This letter also demonstrates the evaluation of the code, and presents the extended codes with two-level burst error correcting capabilities by interleaving.

This paper describes a new approach to the digital watermarking of motion pictures dedicatedly for the MPEG-4 video coding, which intends to enhance the error detection ability. The conventional method lacks not only the detection ability but also the compatibility with video decoders widely used today. Thus in this approach the digital watermarks are to be embedded into the quantized DCT (Discrete Cosine Transform) coefficients for the error detection, where the prevention of the picture quality degradation is also attempted. Experimental results are shown to demonstrate that the error detection ability of the proposed approach is significantly improved, as compared with that of the conventional method, and that the degradation of the picture quality by the watermarking is extremely small.

This paper proposes design of new linear bipolar OTAs using hyperbolic circuits with an intermediate voltage terminal. Four types of the OTAs are presented; two OTAs contain a hyperbolic sine circuit and the other two OTAs employ a hyperbolic cosine circuit. The linear input voltage range of the proposed OTAs is wider than that of the well-known conventional OTA, multi-TANH doublet, while each proposed OTA has advantages, such as low power dissipation, high-frequency characteristics and so on. The results of SPICE simulation show that satisfactory characteristics are obtained.

Many researches have been conducted on the recognition of Thai characters. Different approaches, such as neural network, syntactic, and structural methods, have been proposed. However, the success in recognizing Thai characters is still limited, compared to English characters. This paper proposes an approach to recognize the printed Thai characters using the hybrid of global feature, local features, fuzzy membership function and the neural network. The global feature classifies all characters into seven main groups. Then the local features and the neural network are applied to identify the characters.

In optical networks, wavelength converters are required to improve the efficiency of wavelength-division multiplexing. In this paper, we propose a genetic algorithm to determine the optimal locations of the nodes in the network where a given number of converters are placed. Optimality is achieved by the minimum wavelength blocking probability. Our algorithm is applied to two realistic networks constructed from the locations of major cities in Ibaraki Prefecture and from those in Kanto District in Japan and is shown to reach the nearly optimal solution in a limited number of generations. The accuracy is verified by simulation. The computational time is compared with that of an exhaustive search algorithm.

The concept of the equi-phase curve is introduced for the cross-polarized channel case. It is proved that the equi-phase curves are a series of half circles on the Poincare sphere, and that all these curves have two common ends. Based on the introduced concept, this letter demonstrates the distribution of the received voltage's phases on the Poincare sphere. In addition, it is shown theoretically that the cross-polarized phase of the off-diagonal elements of a scattering matrix is unstable for most natural targets. Therefore, the cross-polarized phase information cannot be used for extracting target characteristics in polarimetric radar remote sensing.

We propose a new type of microstrip line to waveguide transition fabricated on a single layer dielectric substrate. Impedance matching of the transition is achieved by controlling the size of a matching element and the length of an inserted microstrip line across a waveguide. As a result of experiments, low transmission loss of 0.4 dB is realized at the design frequency of 76.5 GHz. Bandwidth of the transition is numerically investigated by the finite element method. It is clarified that the bandwidth of the transition becomes wider as the cross section of the waveguide becomes smaller and twice as wide as that of a conventional microstrip patch antenna element fabricated on a dielectric substrate with the same parameters. In addition, the effect of errors in relative position between the dielectric substrate and the waveguide is also investigated. It becomes clear that degradation of transmission characteristics is caused by the shift of resonant frequency and keeps less than 0.1 dB for a manufacturing accuracy within 0.1 mm.

Traditional watermarking methods based on spectrum manipulation use watermark bit as a colored noise. However, those methods show poor robustness for filtering and audio compression because of only a few spectrum coefficients being modified. In this paper, we propose a new algorithm for robust audio watermarking by using spectrum warping. Our watermark-embedding scheme is not based on spectrum coefficient manipulation, but based on warping spectrum that shifts a block of spectrum coefficients nonlinearly. The host audio signal is divided appropriately into small segments and then a non-orthogonal transform, such as bi-linear transform, is used for each segment to embed as well as to extract watermarks. Because the proposed scheme uses small segment length, we can afford to embed signature information many times into audio signal without severe degradation of SNR. Our multiple embedding scheme increases robustness against abnormal distortion of watermarked signal and has no bit error rate in MPEG1 Layer-3 128 kbps and 96 kbps compression as well as low/high pass filtering.

In this paper, the efficient signal enhancement scheme for an adaptive antenna array under the Nakagami fading channel is proposed. The proposed signal enhancement scheme is the modified linear signal estimator with Toeplitz Matrix Approximation (TMA) method. The underlying principle of the proposed signal enhancement scheme is to reduce a noise component using not only the Lagrangian method of the constrained minimization but also a signal-plus-noise subspace method. TMA is also used to have the theoretical property of noise-free signal. These functions greatly enhance the performance of an adaptive antenna array by removing the all undesired noise effects from the post-correlation received signal. The proposed signal enhancement scheme is applied at the Wiener Maximal Ratio Combining (MRC) method which has been widely used as the conventional adaptive antenna array. Also, we investigated the effect of the power control error (PCE) for the proposed scheme over the Nakagami multipath fading channel. Several computer simulation examples are provided for illustrating the effectiveness of the proposed scheme.

An n-dimensional crossed cube, CQn, is a variation of the hypercube. In this paper, we prove that CQn is (n-2)-Hamiltonian and (n-3)-Hamiltonian connected. That is, a ring of length 2n-fv can be embedded in a faulty CQn with fv faulty nodes and fe faulty edges, where fv+fen-2 and n3. In other words, we show that the faulty CQn is still Hamiltonian with n-2 faults. In addition, we also prove that there exists a Hamiltonian path between any pair of vertices in a faulty CQn with n-3 faults. The above results are optimum in the sense that the fault-tolerant Hamiltonicity (fault-tolerant Hamiltonian connectivity respectively) of CQn is at most n-2 (n-3 respectively). A recent result has shown that a ring of length 2n-2fv can be embedded in a faulty hypercube, if fv+fen-1 and n4, with a few additional constraints. Our results, in comparison to the hypercube, show that longer rings can be embedded in CQn without additional constraints.

This paper presents a formal verification method based on logic simulation. In our method, some restricted class of circuits which include data paths can be verified without abstraction of data paths by using symbolic values. Our verifier extracts a transition relation from the state graph (given as a specification) which is expressed using symbolic values, and verifies based on simulation using those symbolic values if the circuit behaves correctly with respect to each transition of the specification. If the verifier terminates with "correct," then it can be guaranteed that for any applicable input vector sequence, the circuit and the specification behaves identically. We have implemented the proposed method on a Unix workstation and verified some FIFO and LIFO circuits by using it.

Metal nanostructure of organic/metal interface showing photocurrent multiplication phenomenon more than 105-fold was investigated. Au films deposited on organic films were revealed to be a gathering of nanoparticles and the multiplication rate can be tuned by the particle size. Spatial gaps formed between Au sphere and organic surface, which provide the hole accumulation sites (structural trap), was concluded to be indispensable for the photocurrent multiplication.

Polyurea thin films containing azo-based nonlinear optical (NLO) chromophore were prepared by co-deposition of 4,4'-diphenylmethane diisocyanate and 2,4-diamino-4'-nitroazobenzene monomers using the ionization-assisted method. The co-deposited film reacted to form polyurea after annealing in the air. The dichroic optical absorption spectra indicated the preferential orientation of dipole moments in the as-deposited film. The substrate bias voltage influenced the optical anisotropy. Maker fringe measurement showed that the films have NLO activity without the poling process.