A novel formulation for the Scalar-field approach of Integral Equation formulation of the Measured Equation of Invariance (SIE-MEI) is derived from the scalar reciprocity relation to solve the scalar Helmholtz equation. The basics of this formulation are similar to IE-MEI method for the electromagnetic (EM) problem. The surface integral equation is derived from reciprocity relation and on-surface MEI postulates are used. As a result it generates a sparse linear system with the same number of unknowns as of Boundary Element Method (BEM) and keeps the merits in minimum storage memory requirements and CPU time consumption for computing the final matrix. IE-MEI method has been proposed for two-dimensional (2D) electromagnetic problem, but three-dimensional (3D) problem is very difficult to be extend. This scalar-field approach of IE-MEI method is identical to electromagnetic in 2D, but easily extended to the 3D scalar-field scattering problem contrary to EM problem. The numerical results of sphere and cube are verified with some rigorous or numerical solutions, which give excellent agreement.

In this paper, a new voice personality transformation algorithm which uses the vocal tract characteristics and pitch period as feature parameters is proposed. The vocal tract transfer function is divided into time-invariant and time-varying parts. Conversion rules for the time-varying part are constructed by the classified-linear transformation matrix based on soft-clustering techniques for LPC cepstrum expressed in KL (Karhunen-Loève) coefficients. An excitation signal containing prosodic information is transformed by average pitch ratio. In order to improve the naturalness, transformation on the excitation signal is separately applied to voiced and unvoiced bands to preserve the overall spectral structure. Objective tests show that the distance between the LPC cepstrum of a target speaker and that of the speech synthesized using the proposed method is reduced by about 70% compared with the distance between the target speaker's LPC cepstrum and the source speaker's. Also, subjective listening tests show that 60-70% of listeners identify the transformed speech as the target speaker's.

A voltage-mode universal biquadratic filter using single current-feedback amplifier (CFA), two capacitors and three resistors is presented. The new circuit has four inputs and one output and can realize all the standard filter functions, that is, lowpass, bandpass, highpass, notch and allpass filters, without changing the circuit topology. The use of only one current-feedback amplifier simplifiers the configuration.

A low-power-consumption 6-bit pipelined analog-to-digital converter for use in a BluetoothTM RF transceiver has been developed. The RF transceiver chip was fabricated using a 0.35-µm BiCMOS process, and the A/D converter is based on CMOS technology for digital logic. To reduce the power consumption of the converter, we used a look-ahead pipeline architecture to reduce the required settling time of an amplifier in the critical path of the converter. We show that through this reduction, amplifier power consumption of 600 µA can be reduced to 250 µA to achieve a 13-MHz conversion rate. We have also developed a low-power two-capacitor switched-capacitor common-mode feedback circuit which enables an offset cancellation of an amplifier during the reset phase. Offset cancellation is used in each stage of the S/H amplifier to reduce the overall offset of the converter. It achieves an effective number of bits of 5.7 at a conversion rate of 13 Msps and 5.0 at 26 Msps. The residual offset of the converter is only 4 mV. It has a low total current consumption of 3.2 mA at 13 Msps and a supply voltage of 2.8 V.

Caching of frequently accessed data has been shown to be a useful technique for reducing congestion on the narrow bandwidth of wireless channels. However, traditional client/server strategies for supporting transactional cache consistency, which require extensive communications between a client and a server, are not appropriate in a wireless mobile database. This paper proposes two, simple but effective, transactional cache consistency protocols for mobile read-only transactions by utilizing the broadcast-based solutions for the problem of invalidating caches. The novelty of our approach is that the consistency check on accessed data and the commitment protocol are implemented in a truly distributed fashion as an integral part of cache invalidation process. The applicability of proposed techniques is also examined by an analytical study.

This letter proposes a packet length-based group-wise transmission (LGT) rate scheduling scheme for non-real time data service for the uplink of direct sequence code division multiple access (DS/CDMA) system using the burst switching scheme to support the integrated voice/data service. The LGT scheme optimally determines two different rate groups and their optimal data rates so as to minimize the average packet transmission delay. It has shown that the packet transmission delay performance can be significantly improved over the conventional single-rate packet transmission scheme for integrated voice/data service. Furthermore, a main feature of the proposed scheme is simplicity in its implementation.

Adaptive optimization of the notch bandwidth of a lattice-based adaptive infinite impulse response (IIR) notch filter is presented in this paper. The filter is used to improve the performance of a direct sequence spread spectrum (DSSS) binary phase shift keying (BPSK) communication system by suppressing a narrow-band interference at the receiver. A least mean square (LMS) algorithm used to adapt the notch bandwidth coefficient to its optimum value which corresponds to the maximum signal to noise ratio (SNR) improvement factor is derived. Bit error rate (BER) improvement gained by the DSSS communication system using the filter with the optimized notch bandwidth is also shown. Computer simulation results are compared with those obtained analytically to demonstrate the validity of theoretical predictions for various received signal parameters.

It is widely known that the family of projection filters includes the generalized inverse filter, and that the family of parametric projection filters includes parametric generalized projection filters. However, relations between the family of parametric projection filters and constrained least squares filters are not sufficiently clarified. In this paper, we consider relations between parameter estimation and image restoration by these families. As a result, we show that the restored image by the family of parametric projection filters is a maximum penalized likelihood estimator, and that it agrees with the restored image by constrained least squares filter under some suitable conditions.

We show a method to determine a Steiner Minimum Tree (SMT) and a necessary and sufficient condition that an SMT is a full Steiner tree for three given points in -geometry ( = 3m, m is a positive integer). The -geometry allows only orientations with angles i/ (i and ( 2) are integers), and fill up the gap between the rectilinear geometry ( = 2) and the Euclidean geometry ( = ). An SMT in -geometry ( = 3m) has a similar property to that in the Euclidean geometry. The method to determine an SMT in -geometry is an extension of the well-known method in the Euclidean geometry. The Steiner point in -geometry is any point in the intersection area with a parallelogram and a Steiner locus. Then there are infinite candidate locations of the Steiner point. The Steiner point in the Euclidean geometry is that in -geometry ( = 3m).

This paper presents a method of simple adaptive control (SAC) for nonlinear systems using Elman recurrent neural networks (ERNNs). The control input is given by the sum of the output of a simple adaptive controller and the output of the ERNN. The ERNN is used to compensate the nonlinearity of plant dynamics that is not taken into consideration in the usual SAC. The role of the ERNN is to construct a linearized model by minimizing the output error caused by nonlinearities in the control systems.

In this paper, a new maximum likelihood filter with finite impulse response (FIR) structures is proposed for state space signal models with both system and observation noises. This filter is called the maximum likelihood FIR (MLF) filter. The proposed MLF filter doesn't require a priori information of the window initial state and processes the finite observations on the most recent window linearly. The proposed MLF filter is first represented in a batch form, and then in an iterative form for computational advantage. The proposed MLF filter has good inherent properties such as time-invariance, unbiasedness, deadbeat, robustness. The validity of the proposed MLF filter is illustrated by a computer simulation on a sinusoidal signal.

This paper presents the performance modeling, analysis, and simulation of SIP-T (Session Initiation Protocol for Telephones) signaling system in carrier class packet telephony network for NGN (Next Generation Networks). Until recently, fone of the greatest challenges in the migration from existing PSTN (Public Switched Telephone Network) toward NGN is to build a carrier class packet telephony network that preserves the ubiquity, quality, and reliability of PSTN services while allowing the greatest flexibility for use of new packet telephony technology. The SIP-T signaling system defined in IETF (Internet Engineering Task Force) draft is a mechanism that uses SIP (Session Initiation Protocol) to facilitate the interconnection of PSTN with carrier class packet telephony network. Based on IETF, the SIP-T signaling system not only promises scalability, flexibility, and interoperability with PSTN but also provides call control function of MGC (Media Gateway Controller) to set up, tear down, and manage VoIP (Voice over IP) calls in carrier class packet telephony network. In this paper, we derive the buffer size, the mean of queueing delay, and the variance of queueing delay of SIP-T signaling system that are the major performance evaluation parameters for improving QoS (Quality of Service) and system performance of MGC in carrier class packet telephony network focused on toll by-pass or tandem by-pass of PSTN. First, we assume a mathematical model of the M/G/1 queue with non-preemptive priority assignment to represent SIP-T signaling system. Second, we derive the formulas of buffer size, queueing delay, and delay variation for the non-preemptive priority queue by queueing theory respectively. Besides, some numerical examples of buffer size, queueing delay, and delay variation are presented as well. Finally, the theoretical estimates are shown to be in excellent consistence with simulation results.

A new type of triple-band antenna is introduced by combing a tab monopole antenna (TMA) and a planar inverted F antenna (PIFA). The antenna configuration is shown to operate at three discrete frequencies: GSM 900, GSM 1800 (DCS) and GSM 1900 (PCS). The performance of an antenna is presented as well as the results of the computer simulations with a software package based on the Finite Element Method. The simulated results with the real antenna's experimental results. The advantage of the design suggested in this paper is its simplicity of manufacturing and low cost.

This paper proposes a new method to reduce sinusoidal noise components whose frequencies are known. The new method is based on the simultaneous equations technique. The technique does not require the secondary path filter: thereby the automatic recovering of the noise reduction effect deteriorated by secondary path changes becomes possible. This paper also presents computer simulation results to examine the performance of the new method.

In this paper, a novel continuous complementary sliding control was proposed to improve the tracking performance given the available control bandwidth and the extend of parameter uncertainty. With this control law, the ultimate bound of tracking error was shown to be reduced at least by half, as compared with the conventional continuous sliding control. More strikingly, the proposed control can effectively improve the error transient response during the reaching phase. We presented a composite complementary sliding control scheme for a class of uncertain nonlinear systems including the nonlinear electrohydraulic position servo control system, which will be used as an illustrated example. Simulation results indicated exceptional good tracking performance to step and sine wave reference inputs can be obtained. In addition, the disturbance rejection property of the controller to single-frequency sinusoidal disturbances is also outstanding.

A circuit that carries out an Hadamard transform of an input image using the pulse width modulation technique is proposed. The proposed circuit architecture realizes the function of an Hadamard transform with a full-size pixel image. A test chip that we designed and fabricated integrates 64 64 pixels in a 4.9 mm 4.9 mm area, with 0.35 µm CMOS technology. The functional operation and linearity of this chip are measured. An image processing application utilizing this chip is demonstrated.

MOSFETs can be used as capacitors, but its capacitance can vary by 5 to 7 times as its terminal voltage varies. To reduce the voltage dependence of the capacitance, this paper proposed two types of devices: one is called accumulation MOSFET (AMOS) and the other is formed by two conventional PMOS connected in anti-parallel. These two devices are readily available in the standard digital CMOS processes. The proposed capacitors were implemented in three different CMOS processes. The measured results show that the capacitances of both devices have less voltage dependence than a single PMOS. The voltage dependence of the AMOS capacitance can be as small as 17%. The minimum capacitance per unit area of the AMOS is 1.8 times that of the double-poly capacitor in an analog/mixed-mode CMOS process. To verify the usefulness of these two types of capacitors, they are used as compensation capacitors in a conventional two-stage amplifier. The measured results show that the amplifier compensated by the AMOS capacitor has little variation (6%) of the unity-gain frequency over the input common-mode range. Due to its smaller die area and cheaper digital process, AMOS can be used as compensation capacitor without resorting to more expensive analog process.

This paper proposes a new method of retrieving images from large image databases. The method is based on VQ (Vector Quantization) of local texture features at interest points automatically detected in an image. The texture features are extracted by Gabor wavelet filter bank, and rearranged for rotation. These features are classified by VQ and then construct a pattern histogram. Retrievals are performed by just comparing pattern histograms between images.

The cutoff filter and circular window are critically important elements of circular waveguide TE11 mode transmission systems, but no detailed analysis of their characteristics has yet been undertaken. In order to gain a detailed understanding of return loss and other frequency characteristics, one must analyze the electromagnetic (E-M) fields in the waveguide cavity to the cutoff domain and higher mode oscillations. In this work we present a theoretical analysis employing a method in which E-M fields are represented in the form of transmission equations, and show that the results are in remarkably close agreement with experimental results obtained from a prototype device. It is also demonstrated that the results obtained by the proposed method are far more accurate than those obtained using conventional approximation theory.

This paper presents a novel low-energy memory design technique based on variable analysis for on-chip data memory (RAM) in application-specific systems, which called VAbM technique. It targets the exploitation of both data locality and effective data width of variables to reduce energy consumed by data transfer and storage. Variables with higher access frequency and smaller effective data width are assigned into a smaller low-energy memory with fewer bit lines and word lines, placed closer the processor. Under constraints of the number of memory banks, VAbM technique use variable analysis results to perform allocating and assigning on-chip RAM into multiple banks, which have different size with different number of word lines and different number of bit lines tailored to each application requirements. Experimental results with several real embedded applications demonstrate significant energy reduction up to 64.8% over monolithic memory, and 27.7% compared to memory designed by memory banking technique.