In integrated circuit design of advanced technology nodes, layout density uniformity significantly influences the manufacturability due to the CMP variability. In analog design, especially, designers are suffering from passing the density checking since there are few useful tools. To tackle this issue, we focus a transistor-array(TA)-style analog layout, and propose a density optimization algorithm consistent with complicated design rules. Based on TA-style, we introduce a density-aware layout format to explicitly control the layout pattern density, and provide the mathematical optimization approach. Hence, a design flow incorporating our density optimization can drastically reduce the design time with fewer iterations. In a design case of an OPAMP layout in a 65nm CMOS process, the result demonstrates that the proposed approach achieves more than 48× speed-up compared with conventional manual layout, meanwhile it shows a good circuit performance in the post-layout simulation.

This paper presents an efficient wideband two-dimensional direction-of-arrival (DOA) estimation for an L-shaped microphone array. We propose a way to construct a wideband sample cross-correlation matrix without any process of DOA preliminary estimation, such as beamforming technique, by exploiting sample cross-correlation matrices of two different frequencies for all frequency bins. Subsequently, wideband DOAs can be estimated by using this wideband matrix along with a scheme of estimating DOA in a narrowband subspace method. Therefore, a contribution of our study is providing an alternative framework for recent narrowband subspace methods to estimating the DOA of wideband sources directly. It means that this framework enables cutting-edge techniques in the existing narrowband subspace methods to implement the wideband direction estimation for reducing the computational complexity and facilitating the estimation algorithm. Theoretical analysis and effectiveness of the proposed method are substantiated through numerical simulations and experiments, which are performed in reverberating environments. The results show that performance of the proposed method performs better than others over a range of signal-to-noise ratio with just a few microphones. All these advantages make the proposed method a powerful tool for navigation systems based on acoustic signal processing.

Sparse arrays can usually achieve larger array apertures than uniform linear arrays (ULA) with the same number of physical antennas. However, the conventional direction-of-arrival (DOA) estimation algorithms for sparse arrays usually require the spatial smoothing operation to recover the matrix rank which inevitably involves heavy computational complexity and leads to a reduction in the degrees-of-freedom (DOFs). In this paper, a low-complex DOA estimation algorithm by exploiting the discrete Fourier transform (DFT) is proposed. Firstly, the spatial spectrum of the virtual array constructed from the sparse array is established by exploiting the DFT operation. The initial DOA estimation can obtain directly by searching the peaks in the DFT spectrum. However, since the number of array antennas is finite, there exists spectrum power leakage which will cause the performance degradation. To further improve the angle resolution, an iterative process is developed to suppress the spectrum power leakage. Thus, the proposed algorithm does not require the spatial smoothing operation and the computational complexity is reduced effectively. In addition, due to the extention of DOF with the application of the sparse arrays, the proposed algorithm can resolve the underdetermined DOA estimation problems. The superiority of the proposed algorithm is demonstrated by simulation results.

We show that the non-trivial correlation of two properly chosen column sequences of length q-1 from the array structure of two Sidelnikov sequences of periods qe-1 and qd-1, respectively, is upper-bounded by $(2d-1)sqrt{q} + 1$, if $2leq e < d < rac{1}{2}(sqrt{q}-rac{2}{sqrt{q}}+1)$. Based on this, we propose a construction by combining properly chosen columns from arrays of size $(q-1) imes rac{q^e-1}{q-1}$ with e=2,3,...,d. The combining process enlarge the family size while maintaining the upper-bound of maximum non-trivial correlation. We also propose an algorithm for generating the sequence family based on Chinese remainder theorem. The proposed algorithm is more efficient than brute force approach.

This paper improves our previously proposed semi-blind uplink interference suppression scheme for multicell multiuser massive MIMO systems by incorporating the beamspace approach. The constant modulus algorithm (CMA), a known blind adaptive array scheme, can fully exploit the degree of freedom (DoF) offered by massive antenna arrays to suppress inter-user interference (IUI) and inter-cell interference (ICI). Unfortunately, CMA wastes a lot of the benefit of DoF for null-steering even when the number of incoming signal is fewer than that of receiving antenna elements. Our new proposal introduces the beamspace method which degenerates the number of array input for CMA from element-space to beamspace. It can control DoF expended for subsequent interference suppression by CMA. Optimizing the array beamforming gain and null-steering ability, can further improve the output signal-to-interference and noise power ratio (SINR). Computer simulation confirmed that our new proposal reduced the required number of data symbols by 34.6%. In addition, the 5th percentile SINR was also improved by 14.3dB.

A W-band corporate-feed 16×16-slot array antenna with low sidelobe level is designed and fabricated. The basic unit of the array is a 2×2-circular-slot subarray with step square cavities and uses an E-plane waveguide as the feeding line. An efficient method to design an unequal power-splitting ratio but equal phase (UPEP) E-plane waveguide T-junction (E-T) is proposed for constructing a 1-to-64 power-tapering feed network, which is the critical part to realize low sidelobe level. The whole array is fabricated with aluminum by milling and bonded by the vacuum brazing process. The measured results demonstrate that the array can achieve a 7.2% bandwidth with VSWR<1.5 and holistic sidelobe levels lower than -23.5dB in E-plane and H-plane from 89GHz ∼ 95.8GHz. The measured gain is higher than 31.7dBi over the working band with the antenna efficiency better than 67.5%.

We present a seven-bit multilayer true-time delay (TTD) circuit operating from 1 to 7GHz for wideband phased array antennas. By stacking advanced substrates with low dielectric loss, the TTD with PCB process is miniaturized and has low insertion loss. The signal vias with surrounding ground vias are designed to provide impedance matching throughout the band, allowing the overall group delay to be flat. The standard deviation of the TTD for all states is below 19ps, which is 1.87% of the maximum group delay. The maximum delay is 1016ps with resolution of 8ps. The implemented TTD is 36.6×19.4mm2 and consumes 0.65mW at 3.3V supply for all the delay states. The measured input/output return loss is better than 12.1dB for the band of 1-7GHz.

We have developed a novel array configuration based on the combination of sum and difference co-arrays. There have been many studies on array antenna configurations that enhance the degree of freedom (DOF) of an array, but the maximum DOF of the difference co-array configuration is often limited. With our proposed array configuration, called “sum and difference composite co-array”, we aim to further enhance the DOF by combining the concept of sum co-array and difference co-array. The performance of the proposed array configuration is evaluated through computer simulated beamforming*.

This paper introduces a method that identifies human activity from the height and Doppler Radar Cross Section (RCS) information detected by Multiple-Input Multiple-Output (MIMO) radar. This method estimates the three-dimensional target location by applying the MUltiple SIgnal Classification (MUSIC) method to the observed MIMO channel; the Doppler RCS is calculated from the signal reflected from the target. A gesture recognition algorithm is applied to the trajectory of the temporal transition of the estimated human height and the Doppler RCS. In experiments, the proposed method achieves over 90% recognition rate (average).

Wireless communication security has been increasingly important nowadays. Directional modulation (DM) is seen as a promising wireless physical layer security technology. Traditional DM is a transmit-side technology that projects digitally modulated information signals in the desired directions (or at the desired locations) while simultaneously distorting the constellation formats of the same signals in other directions (or at all other locations). However, these directly exposed digitally modulated information signals are easily intercepted by eavesdroppers along the desired directions (or around the desired locations). A new DM scheme for secure point-to-multipoint communication based on the spread spectrum assisted orthogonal frequency diverse array (short for SS-OFDA-M-DM) is proposed in this paper. It can achieve point-to-multipoint secure communication for multiple cooperative receivers at different locations. In the proposed SS-OFDA-M-DM scheme, only cooperative users that use specific DM receivers with right spread spectrum parameters can retrieve right symbols. Eavesdroppers without knowledge of spread spectrum parameters cannot intercept useful signals directly at the desired locations. Moreover, they cannot receive normal symbols at other locations either even if the right spread spectrum parameters are known. Numerical simulation results verify the validity of our proposed scheme.

In sparsity-based optimization problems for two dimensional (2-D) direction-of-arrival (DOA) estimation using L-shaped nested arrays, one of the major issues is computational complexity. A 2-D DOA estimation algorithm is proposed based on reconsitution sparse Bayesian learning (RSBL) and cross covariance matrix decomposition. A single measurement vector (SMV) model is obtained by the difference coarray corresponding to one-dimensional nested array. Through spatial smoothing, the signal measurement vector is transformed into a multiple measurement vector (MMV) matrix. The signal matrix is separated by singular values decomposition (SVD) of the matrix. Using this method, the dimensionality of the sensing matrix and data size can be reduced. The sparse Bayesian learning algorithm is used to estimate one-dimensional angles. By using the one-dimensional angle estimations, the steering vector matrix is reconstructed. The cross covariance matrix of two dimensions is decomposed and transformed. Then the closed expression of the steering vector matrix of another dimension is derived, and the angles are estimated. Automatic pairing can be achieved in two dimensions. Through the proposed algorithm, the 2-D search problem is transformed into a one-dimensional search problem and a matrix transformation problem. Simulations show that the proposed algorithm has better angle estimation accuracy than the traditional two-dimensional direction finding algorithm at low signal-to-noise ratio and few samples.

A novel algorithm is proposed for estimating the direction of arrival (DOA) of linear frequency modulated (LFM) signals for the uniform circular array (UCA). Firstly, the UCA is transformed into an equivalent virtual uniform linear array (ULA) using the mode-space algorithm. Then, the short time Fourier transform (STFT) of each element's output is worked out. We can obtain the spatial time-frequency distribution matrix of the virtual ULA by selecting the single-source time-frequency (t-f) points in the t-f plane and then get the signal subspace of the array. The characteristics nature of the Bessel function allow us to obtain the multiple invariance (MI) of the virtual ULA. So the multiple rotational invariant equation of the array can be obtained and its closed-form solution can be worked out using the multi-least-squares (MLS) criterion. Finally, the two dimensional (2-D) DOA estimation of LFM signals for UCA can be obtained. Numerical simulation results illustrate that the UCA-STFT-MI-ESPRIT algorithm proposed in this paper can improve the estimation precision greatly compared with the traditional ESPRIT-like algorithms and has much lower computational complexity than the MUSIC-like algorithms.

All digital phased arrays generate multiple beams concurrently through the digital beam forming technique, which features digital processing with multiple identical receiving/transmitting channels in RF or microwave frequencies. However, the performance of this process strongly depends on accurately matching the amplitude and phase of the channels, as mismatching is likely to degrade radar performance. In this paper, we present a method to calibrate receiving array by using NCO phase increasing algorithm, which simplifies array system by removing the external far-field calibration signals often needed in array systems. Both analysis and simulation results suggest that the proposed method attains better calibration performance than existing approaches, even with a low SNR input signal. Experiments also varify that the proposed calibration method is effective and achieves a desired radiation pattern. We can further boost calibration accuracy and reduce calibration time by programming NCO phase width and NCO phase resolution.

As big data attracts attention in a variety of fields, research on data exploration for analyzing large-scale scientific data has gained popularity. To support exploratory analysis of scientific data, effective summarization and visualization of the target data as well as seamless cooperation with modern data management systems are in demand. In this paper, we focus on the exploration-based analysis of scientific array data, and define a spatial V-Optimal histogram to summarize it based on the notion of histograms in the database research area. We propose histogram construction approaches based on a general hierarchical partitioning as well as a more specific one, the l-grid partitioning, for effective and efficient data visualization in scientific data analysis. In addition, we implement the proposed algorithms on the state-of-the-art array DBMS, which is appropriate to process and manage scientific data. Experiments are conducted using massive evacuation simulation data in tsunami disasters, real taxi data as well as synthetic data, to verify the effectiveness and efficiency of our methods.

Wireless communication security has become a hot topic in recent years. The directional modulation (DM) is a promising secure communication technique that has attracted attentions of many researchers. Several different frequency diverse arrays (FDAs) are used to obtain the direction-range-dependent DM signals in previous literatures. However, most of them are not ideal enough to obtain a nonperiodic dot-shaped secure area. In this paper, the symmetrical multi-carrier frequency diverse array with logarithmical frequency increment, named the symmetrical-multilog-FDA, is used to obtain the direction-range-dependent DM signals that are normal at the desired locations while disordered at other locations. Based on the symmetrical-multilog-FDA, we derive the closed-form expression of baseband-weighted vector using the artificial-noise-aided zero-forcing approach. Compared with previous schemes, the proposed scheme can obtain a more fine-focusing nonperiodic dot-shaped secure area at the desired location. In addition, it can achieve a point-to-multipoint secure communication for multiple cooperative receivers at different locations.

This paper presents a method combining array signal processing and adaptive noise cancellation to suppress unwanted ambient interferences in in situ measurement of radiated emissions of equipment. First, the signals received by the antenna array are processed to form a main data channel and an auxiliary data channel. The main channel contains the radiated emissions of the equipment under test and the attenuated ambient interferences. The auxiliary channel only contains the attenuated ambient interferences. Then, the adaptive noise cancellation technique is used to suppress the ambient interferences based on the correlation of the interferences in the main and auxiliary channels. The proposed method overcomes the problem that the ambient interferences in the two channels of the virtual chamber method are not correlated, and realizes the suppression of multi-source ambient noises in the use of fewer array elements. The results of simulation and experiment show that the proposed method can effectively extract radiated emissions of the equipment under test in complex electromagnetic environment. Finally, discussions on the effect of the beam width of the main channel and the generalization of the proposed method to three dimensionally distributed signals are addressed.

This paper studies the performance of the quantitative RF power variation in Radio-over-Fiber beam forming system utilizing a phased array-antenna integrating photo-diodes in downlink network for next generation millimeter wave band radio access. Firstly, we described details of fabrication of an integrated photonic array-antenna (IPA), where a 60GHz patch antenna 4×2 array and high-speed photo-diodes were integrated into a substrate. We evaluated RF transmission efficiency as an IPA system for Radio-over-Fiber (RoF)-based mobile front hall architecture with remote antenna beam forming capability. We clarified the characteristics of discrete and integrated devices such as an intensity modulator (IM), an optical fiber and the IPA and calculated RF power radiated from the IPA taking account of the measured data of the devices. Based on the experimental results on RF tone signal transmission by utilizing the IPA, attainable transmission distance of wireless communication by improvement and optimization of the used devices was discussed. We deduced that the antenna could output sufficient power when we consider that the cell size of the future mobile communication systems would be around 100 meters or smaller.

In order to provide an alternative solution of human machine interfaces, this paper proposed to recognize 10 human hand gestures regularly used in the consumer electronics controlling scenarios based on a three-dimensional radar array. This radar array was composed of three low cost 24GHz K-band Doppler CW (Continuous Wave) miniature I/Q (In-phase and Quadrature) transceiver sensors perpendicularly mounted to each other. Temporal and spectral analysis was performed to extract magnitude and phase features from six channels of I/Q signals. Two classifiers were proposed to implement the recognition. Firstly, a decision tree classifier performed a fast responsive recognition by using the supervised thresholds. To improve the recognition robustness, this paper further studied the recognition using a two layer CNN (Convolutional Neural Network) classifier with the frequency spectra as the inputs. Finally, the paper demonstrated the experiments and analysed the performances of the radar array respectively. Results showed that the proposed system could reach a high recognition accurate rate higher than 92%.

We present a novel hybrid beamforming architecture for high speed 5G technologies. The architecture combines several new concepts to achieve significant hardware and cost reduction for large antenna arrays. Specifically, we employ an on-site code division multiplexing scheme to group several antenna elements into a single analog-to-digital converter (ADC). This approach significantly reduces analog hardware and power requirements by a factor of 8 to 32. Additionally, we employ a novel analog frequency independent beamforming scheme to eliminate phase shifters altogether and allow for coherent combining at the analog front-end. This approach avoids traditional phase-shifter-based approaches typically associated with bulky and inefficient components. Preliminary analysis shows that for an array of 800 elements, as much as 97% reduction in cost and power is achieved using the hybrid beamformer as compared to conventional beamformer systems.

This paper presents a design for the perpendicular-corporate feed in a four-layer circularly-polarized parallel-plate slot array antenna. We place a dielectric layer with adequate permittivity in the region between the coupling-aperture and the radiating-slot layers to remove x-shaped cavity walls completely in the radiating part of a conventional planar corporate-feed waveguide slot array antenna. To address fabrication constraints, the dielectric layer consists of PTFE and air. It excites a strong standing wave in the region and so provides 2×2-element subarrays with uniform excitation. None of the slot layers are in electrical contact due to air gaps between the slot layers. The four-layer structure with apertures for circular polarization contributes to wideband design for axial ratios because of the eigenmodes in the desired band. We realize an 11.9% bandwidth for axial ratios of less than 3.0dB as confirmed by measurements in the 60GHz band. At the design frequency, the measured realized gain is 32.7dBi with an antenna efficiency of 75.5%.