Drones have been attractive for many kinds of industries, but limited power supply from batteries has impeded drones from being operated for longer hours. Microwave power transmission (MPT) is one of the most prospective technologies to release them from the limitation. Since, among several types of drones, micro-drone has shorter available flight time, it is reasonable to provide micro-drone with wireless charging access with an MPT system. However, there is no suitable rectenna for micro-drone charging applications in preceding studies. In this paper, an MPT system for micro-drone was proposed at C-band where a lightweight and compact rectenna array with 20-W class output power was developed. Under illumination of a flat-top beam with 203 mW/cm2 of power density, a 16-element rectenna array was measured. The 16-element rectenna was formed with the aid of a honeycomb substrate for lightness and GaAs Schottky barrier diodes for high output. It was 37.5 g in weight and 146.4 mm by 146.4 mm in size. It output 27.0 W of dc power at 19.0 V at 5.8 GHz when radio frequency power of 280 W was generated by the injection-locked magnetron and 134 W was transmitted from the transmitting phased array. The power-to-weight ratio was 0.72W/g. The power conversion efficiency was 61.9%. These numbers outperformed the rectennas in the preceding studies and are suitable for an MPT system to micro-drone.

This paper proposes a method for cooperative multi-static Multiple Input Multiple Output (MIMO) radar that can estimate the number of targets. The purpose of this system is to monitor humans in an indoor environment. First, target positions within the estimation range are roughly detected by the Capon method and the mode vector corresponding to the detected positions is calculated. The mode vector is multiplied by the eigenvector to eliminate the virtual image. The spectrum of the evaluation function is calculated from the remaining positions, and the number of peaks in the spectrum is defined as the number of targets. Experiments carried out in an indoor environment confirm that the proposed method can estimate the number of targets with high accuracy.

Research on wireless power transmission technology is being actively conducted, and studies on spatial transmission methods such as SSPS are currently underway for applications such as power transfer to the upper part of steel towers and power transfer to flying objects such as drones. To enable such applications, it is necessary to examine the configuration of the power-transfer and power-receiving antennas and to improve the RF-DC conversion efficiency (hereinafter referred to as conversion efficiency) of the rectifier circuit on the power-receiving antenna. To improve the conversion efficiency, various methods that utilize full-wave rectification rather than half-wave rectification have been proposed. However, these come with problems such as a complicated circuit structure, the need for additional capacitors, the selection of components at high frequencies, and a reduction in mounting yield. In this paper, we propose a method to improve the conversion efficiency by loading a high-impedance microstrip line as a feedback line in part of the rectifier circuit. We analyzed a class-F rectifier circuit using circuit analysis software and found that the conversion efficiency of the conventional configuration was 54.2%, but the proposed configuration was 69.3%. We also analyzed a measuring circuit made with a discrete configuration in the 5.8-GHz band and found that the conversion efficiency was 74.7% at 24dBm input.

Frequency delta sigma modulation (FDSM) is a unique analog to digital conversion technique featuring large dynamic range with wide frequency band width. It can be used for high performance digital-output sensors, if the oscillator in the FDSM is replaced by a variable frequency oscillator whose frequency depends on a certain external physical quantity. One of the most important parameters governing the performance of these sensors is a phase noise of the oscillator. The phase noise is an essential error source in the FDSM, and it is quite important for this type of sensors because they use a high frequency oscillator and an extremely large oversampling ratio. In this paper, we will discuss the quantitative effects of the phase noise on the FDSM output on the basis of a simple model. The model was validated with experiments for three types of oscillators.

In this paper, we propose a direct digital RF transmitter with a 1-bit band-pass delta-sigma modulator (BP-DSM) that uses high order image components of the 7th Nyquist zone in Manchester coding for microwave and milimeter wave application. Compared to the conventional non-return-to-zero (NRZ) coding, in which the high order image components of 1-bit BP-DSM attenuate severely in the form of sinc function, the proposed 1-bit direct digital RF transmitter in Manchester code can improve the output power and signal-to-noise ratio (SNR) of the image components at specific (4n-1)th and (4n-2)th Nyquist Zone, which is confirmed by calculating of the power spectral density. Measurements are made to compare three types of 1-bit digital-to-analog converter (DAC) signal in output power and SNR; NRZ, 50% duty return-to-zero (RZ) and Manchester coding. By using 1 Vpp/8Gbps DAC output, 1-bit signals in Manchester coding show the highest output power of -20.3dBm and SNR of 40.3dB at 7th Nyquist Zone (26GHz) in CW condition. As a result, compared to NRZ and RZ coding, at 7th Nyquist zone, the output power is improved by 8.1dB and 6dB, respectively. Meanwhile, the SNR is improved by 7.6dB and 4.9dB, respectively. In 5Mbps-QPSK condition, 1-bit signals in Manchester code show the lowest error vector magnitude (EVM) of 2.4% and the highest adjacent channel leakage ratio (ACLR) of 38.2dB with the highest output power of -18.5dBm at 7th Nyquist Zone (26GHz), respectively, compared to the NRZ and 50% duty RZ coding. The measurement and simulation results of the image component of 1-bit signals at 7th Nyquist Zone (26GHz) are consistent with the calculation results.

A noise-robust and accuracy-enhanced microwave imaging algorithm is presented for microwave ablation monitoring of cancer treatment. The ablation impact of dielectric change can be assessed by microwave inverse scattering analysis, where the dimension and dielectric drop of the ablation zone enable safe ablation monitoring. We focus on the distorted Born iterative method (DBIM), which is applicable to highly heterogeneous and contrasted dielectric profiles. As the reconstruction accuracy and convergence speed of DBIM depend largely on the initial estimate of the dielectric profile or noise level, this study exploits a prior estimate of the DBIM for the pre-ablation state to accelerate the convergence speed and introduces the matched-filter-based noise reduction scheme in the DBIM framework. The two-dimensional finite-difference time-domain numerical test with realistic breast phantoms shows that our method significantly enhances the reconstruction accuracy with a lower computational cost.

An f0/2f0 (frequency ratio of two) microstrip diplexer with simple circuit configuration as well as low and wideband insertion-loss characteristics is proposed. It is a parallel combination of a coupled line for f0 port and a wave-trap circuit composed of a transmission line and an open stub for 2f0 port. All the lines and stub have a quarter-wave length for f0. Matching circuits are not needed. Circuit and electro-magnetic simulation results prove that the proposed f0/2f0 diplexer exhibits well-balanced properties of insertion loss (IL), IL bandwidth, and isolation, as compared to conventional simple f0/2f0 diplexers composed of two wave-trap circuits or two coupled lines. The proposed diplexer is fabricated on a resin substrate in a microstrip configuration at frequencies of f0/2f0=2.5/5 GHz. Measured results are in good agreement with simulations and support the above conclusion. The proposed diplexer exhibits ILs of 0.46/0.56 dB with 47/47% relative bandwidth (for f0/2f0), which are lower and wider than f0/2f0 diplexers in literatures at the same frequency bands.

Recently, GaN devices are often adopted in microwave power amplifiers to improve the performances. And many new design methods of microwave power amplifier were proposed. As a result, a high-efficiency and super compact microwave signal source has become easily available. It opens up the way for new microwave heating systems. In this paper, the recent progress on design methods of microwave power amplifier and the applications for microwave heating are described. In the first, a device model of GaN transistor is explained. An equivalent thermal model is introduced into the electrical non-linear equivalent device model. In the second, an active load-pull (ALP) measurement system to design a high-efficiency power amplifier is explained. The principle of the conventional closed-loop ALP system is explained. To avoid the risk of oscillation for the closed-loop ALP system, novel ALP systems are proposed. In the third, a microwave heating system is explained. The heating system monitors the reflection wave. Then, the frequency of the signal source and the phase difference between antennas are controlled to minimize the reflection wave. Absorption efficiency of more than 90% was obtained by the control of frequency and phase. In the last part, applications for a medical instrument is described.

A planar electromagnetic field stirrer with periodically arranged metal patterns and diode switches is proposed for improving uneven heating of a heated object placed in a microwave oven. The reflection phase of the proposed stirrer changes by switching the states of diodes mounted on the stirrer and the electromagnetic field in the microwave oven is stirred. The temperature distribution of a heated object located in a microwave oven was simulated and measured using the stirrer in order to evaluate the improving effect of the uneven heating. As the result, the heated parts of the objects were changed with the diode states and the improving effect of the uneven heating was experimentally indicated.

Microwave mammography is a promising alternative to X-ray based imaging modalities, because of its small size, low cost, and cell-friendly exposure. More importantly, this modality enables the suppression of surface reflection clutter, which can be enhanced by introducing accurate surface shape estimations. However, near-field measurements can reduce the shape estimation accuracy, due to a mismatch between the reference and observed waveforms. To mitigate this problem, this study incorporates envelope-based shape estimation and finite-difference time-domain (FDTD)-based waveform correction with a fractional derivative adjustment. Numerical simulations based on realistic breast phantoms derived from magnetic resonance imaging (MRI) show that the proposed method significantly enhances the accuracy of breast surface imaging and the performance of surface clutter rejection.

In the beam-type microwave power transmission system, it is required to minimize the interference with communication and the influence on the human body. Retrodirective system that re-radiates a beam in the direction of arrival of a signal is well known as a beam control technique for accurate microwave power transmission. In this paper, we newly propose to apply the retrodirective system to both transmitting and receiving antennas. The leakage to the outside of the system is expected to minimize self-convergently while following the atmospheric fluctuation and the antenna movement by repeating the retrodirective between the transmitting and receiving antenna in this system. We considered this phenomenon theoretically using an infinite array antenna model. Finally, it has been shown by the equivalent circuit simulation that stable transmission can be realized by oscillating the system.

This paper introduces a method that identifies human activity from the height and Doppler Radar Cross Section (RCS) information detected by Multiple-Input Multiple-Output (MIMO) radar. This method estimates the three-dimensional target location by applying the MUltiple SIgnal Classification (MUSIC) method to the observed MIMO channel; the Doppler RCS is calculated from the signal reflected from the target. A gesture recognition algorithm is applied to the trajectory of the temporal transition of the estimated human height and the Doppler RCS. In experiments, the proposed method achieves over 90% recognition rate (average).

This paper describes a non-contact and noise-tolerant heart rate monitoring system using a 24-GHz microwave Doppler sensor. The microwave Doppler sensor placed at some distance from the user's chest detects the small vibrations of the body surface due to the heartbeats. The objective of this work is to detect the instantaneous heart rate (IHR) using this non-contact system in a car, because the possible application of the proposed system is a driver health monitoring based on heart rate variability analysis. IHR can contribute to preventing heart-triggered disasters and to detect mental stress state. However, the Doppler sensor system is very sensitive and it can be easily contaminated by motion artifacts and road noise especially while driving. To address this problem, time-frequency analysis using the parametric method and template matching method are employed. Measurement results show that the Doppler sensor, which is pasted on the clothing surface, can successfully extract the heart rate through clothes. The proposed method achieves 13.1-ms RMS error in IHR measurements conducted on 11 subjects in a car on an ordinary road.

The paper presents the analysis, design and performance of PCB (Printed Circuit Board)-based cross-coupled differential VCOs using a novel LC-tank. As compared with the conventional LC-tank, a novel LC-tank is comprised of only chip inductors and thus has an advantage in providing a higher cutoff frequency. This feature attributes to the use of the parasitic elements of the chip inductors and capacitors. The cutoff frequencies were compared for both LC-tanks by calculation, simulation and measurement. Then the traditional cross-coupled differential oscillators having both LC-tanks were designed, fabricated and performed by using 0.35µm SiGe HBTs and 1005-type chip devices. The implemented oscillator using a novel LC-tank has shown a 0.12GHz higher oscillation frequency, while phase noise characteristics were almost the same. In addition, the cross-coupled differential oscillator utilizes a series RL circuit in order to suppress the concurrent oscillations. The implemented cross-coupled differential VCO employing Si varactor diodes with a capacitance ratio of 2.5 to 1 has achieved a tuning frequency of 0.92 to 1.28GHz, an output power greater than -13.5dBm, a consumed power less than 8.7mW and a phase noise at 100kHz offset in a range from -104 to -100dBc/Hz.

Recently, a multi-way TE10 mode power divider based on the TE10-TEp0 mode transducers consisting of a linearly arranged single-mode waveguide (SMWG) and an over-moded waveguide (OMWG) has been reported. However, the multi-way power divider based on the present mode transducer results in poor isolation and output matching characteristics. In this paper, an improvement of the isolation and the output matching characteristics is attempted by inserting the resistive sheets in the OMWG. It is shown that the isolation characteristics of about 20 dB are achieved by adjusting the dimensions of the resistive sheets. The validity of the design results is confirmed by an experiment.

This paper presents the Received-Signal-Strength-Indicator (RSSI) based living-body radar, which uses only a single RF front-end and a few parasitic antennas. This radar measures the RSSI variation at the single active antenna while varying the terminations of the parasitic antennas. The propagation channel is estimated from just the temporal transition of RSSI; our proposal reconstructs the phase information of the signal. In this paper, we aim to estimate the direction of living-body. Experiments are carried out and it is found that most angular errors are within the limit of the angular width of the living-body.

To aim to achieve a high-performance computation for microwave simulations with low cost, small size machine and low energy consumption, a method of the FDTD dedicated computer has been investigated. It was shown by VHDL logical circuit simulations that the FDTD dedicated computer with a dataflow architecture has much higher performance than that of high-end PC and GPU. Then the remaining task of this work is large scale computations by the dedicated computer, since microwave simulations for only 18×18×Z grid space (Z is the number of girds for z direction) can be executed in a single FPGA at most. To treat much larger numerical model size for practical applications, this paper considers an implementation of a domain decomposition method operation of the FDTD dedicated computer in a single FPGA.

A TM010 cavity power combiner is presented, which achieves direct interface to microstrip lines via magnetic field coupling. A prototype is fabricated and its S-matrix measured. From the S-parameters we calculate that it shows less than 0.85 dB insertion loss over 250 MHz bandwidth at X-band. The return power to the input ports is less than -15 dB over this bandwidth. We verify the insertion loss estimation using S-matrix, by measuring transmission S-parameter of a concatenated 2-port divider-combiner network. Similarly analyzed is the case of performance of power combiner when one of the input fails. We find that we can achieve graceful degradation provided we ensure some particular reflection phase at the degraded port.

The Time Domain Boundary Element Method (TDBEM) has its advantages in the analysis of transient electromagnetic fields (wake fields) induced by a charged particle beam with curved trajectory in a particle accelerator. On the other hand, the TDBEM has disadvantages of huge required memory and computation time compared with those of the Finite Difference Time Domain (FDTD) method or the Finite Integration Technique (FIT). This paper presents a comparison of the FDTD method and 4-D domain decomposition method of the TDBEM based on an initial value problem formulation for the curved trajectory electron beam, and application to a full model simulation of the bunch compressor section of the high-energy particle accelerators.

A continuous flow reactor equipped with a low-loss flow channel and a microwave cavity was developed for synthesizing nanophosphors. A continuous solution synthesis of YVO4:Eu,Bi nanophosphor was succeeded through the rapid hydrothermal method using this equipment. Internal quantum efficiency of YVO4:Eu,Bi nanophosphor obtained by 20 minutes microwave heating is about 30% at 320 nm as high as that obtained by 6 hours hydrothermal treatment in autoclave.