Traffic congestion in road networks has been studied as the congestion game in game theory. In the existing work, the road usage by each agent was assumed to be static during the whole time horizon of the agent's travel, as in the classical congestion game. This assumption, however, should be reconsidered because each agent sequentially uses roads composing the route. In this paper, we propose a multi-agent distributed route selection scheme based on a gradient descent method considering the time-dependency among agents' road usage for vehicular networks. The proposed scheme first estimates the time-dependent flow on each road by considering the agents' probabilistic occupation under the first-in-first-out (FIFO) policy. Then, it calculates the optimal route choice probability of each route candidate using the gradient descent method and the estimated time-dependent flow. Each agent finally selects one route according to the optimal route choice probabilities. We first prove that the proposed scheme can exponentially converge to the steady-state at the convergence rate inversely proportional to the product of the number of agents and that of individual route candidates. Through simulations under a grid-like network and a real road network, we show that the proposed scheme can improve the actual travel time by 5.1% and 2.5% compared with the conventional static-flow based approach, respectively. In addition, we demonstrate that the proposed scheme is robust against incomplete information sharing among agents, which would be caused by its low penetration ratio or limited transmission range of wireless communications.

In recent years, federated learning has attracted more and more attention as it could collaboratively train a global model without gathering the users' raw data. It has brought many challenges. In this paper, we proposed layer-based federated learning system with privacy preservation. We successfully reduced the communication cost by selecting several layers of the model to upload for global averaging and enhanced the privacy protection by applying local differential privacy. We evaluated our system in non independently and identically distributed scenario on three datasets. Compared with existing works, our solution achieved better performance in both model accuracy and training time.

In this paper, we propose a novel user selection scheme based on jointly combining channel gain (CG) and signal to interference plus noise ratio (SINR) to improve the sum-rate as well as to reduce the computation complexity of multi-user massive multi-input multi-output (MU-massive MIMO) downlink transmission through a block diagonalization (BD) precoding technique. By jointly considering CG and SINR based user sets, sum-rate performance improvement can be achieved by selecting higher gain users with better SINR conditions as well as by eliminating the users who cause low sum-rate in the system. Through this approach, the number of possible outcomes for the user selection scheme can be reduced by counting the common users for every pair of user combinations in the selection process since the common users of CG-based and SINR-based sets possess both higher channel gains and better SINR conditions. The common users set offers not only sum-rate performance improvements but also computation complexity reduction in the proposed scheme. It is shown by means of computer simulation experiments that the proposed scheme can increase the sum-rate with lower computation complexity for various numbers of users as compared to conventional schemes requiring the same or less computational complexity.

Unsupervised Feature selection is an important dimensionality reduction technique to cope with high-dimensional data. It does not require prior label information, and has recently attracted much attention. However, it cannot fully utilize the discriminative information of samples, which may affect the feature selection performance. To tackle this problem, in this letter, we propose a novel discriminative virtual label regression method (DVLR) for unsupervised feature selection. In DVLR, we develop a virtual label regression function to guide the subspace learning based feature selection, which can select more discriminative features. Moreover, a linear discriminant analysis (LDA) term is used to make the model be more discriminative. To further make the model be more robust and select more representative features, we impose the ℓ2,1-norm on the regression and feature selection terms. Finally, extensive experiments are carried out on several public datasets, and the results demonstrate that our proposed DVLR achieves better performance than several state-of-the-art unsupervised feature selection methods.

Siamese visual tracking, viewed as a problem of max-similarity matching to the target template, has absorbed increasing attention in computer vision. However, it is a challenge for current Siamese trackers that the demands of balance between accuracy in real-time tracking and robustness in long-time tracking are hard to meet. This work proposes a new Siamese based tracker with a dual-pipeline correlated fusion network (named as ADF-SiamRPN), which consists of one initial template for robust correlation, and the other transient template with the ability of adaptive feature optimal selection for accurate correlation. By the promotion from the learnable correlation-response fusion network afterwards, we are in pursuit of the synthetical improvement of tracking performance. To compare the performance of ADF-SiamRPN with state-of-the-art trackers, we conduct lots of experiments on benchmarks like OTB100, UAV123, VOT2016, VOT2018, GOT-10k, LaSOT and TrackingNet. The experimental results of tracking demonstrate that ADF-SiamRPN outperforms all the compared trackers and achieves the best balance between accuracy and robustness.

In distributed processing for communication services, a proper server selection scheme is required to reduce delay by ensuring the event occurrence order. Although a conservative synchronization algorithm (CSA) has been used to achieve this goal, an optimistic synchronization algorithm (OSA) can be feasible for synchronizing distributed systems. In comparison with CSA, which reproduces events in occurrence order before processing applications, OSA can be feasible to realize low delay communication as the processing events arrive sequentially. This paper proposes an optimal server selection scheme that uses OSA for distributed processing systems to minimize end-to-end delay under the condition that maximum status holding time is limited. In other words, the end-to-end delay is minimized based on the allowed rollback time, which is given according to the application designing aspects and availability of computing resources. Numerical results indicate that the proposed scheme reduces the delay compared to the conventional scheme.

In 2019, a new selection method, named fitness-distance balance (FDB), was proposed. FDB has been proved to have a significant effect on improving the search capability for evolutionary algorithms. But it still suffers from poor flexibility when encountering various optimization problems. To address this issue, we propose a functional weights-enhanced FDB (FW). These functional weights change the original weights in FDB from fixed values to randomly generated ones by a distribution function, thereby enabling the algorithm to select more suitable individuals during the search. As a case study, FW is incorporated into the spherical search algorithm. Experimental results based on various IEEE CEC2017 benchmark functions demonstrate the effectiveness of FW.

Relation extraction is one of the key basic tasks in natural language processing in which distant supervision is widely used for obtaining large-scale labeled data without expensive labor cost. However, the automatically generated data contains massive noise because of the wrong labeling problem in distant supervision. To address this problem, the existing research work mainly focuses on removing sentence-level noise with various sentence selection strategies, which however could be incompetent for disposing word-level noise. In this paper, we propose a novel neural framework considering both intra-sentence and inter-sentence relevance to deal with word-level and sentence-level noise from distant supervision, which is denoted as Sentence-Related Gated Piecewise Convolutional Neural Networks (SR-GPCNN). Specifically, 1) a gate mechanism with multi-head self-attention is adopted to reduce word-level noise inside sentences; 2) a soft-label strategy is utilized to alleviate wrong-labeling propagation problem; and 3) a sentence-related selection model is designed to filter sentence-level noise further. The extensive experimental results on NYT dataset demonstrate that our approach filters word-level and sentence-level noise effectively, thus significantly outperforms all the baseline models in terms of both AUC and top-n precision metrics.

An efficient Feature selection strategy is important in the dimension reduction of data. Extensive existing research efforts could be summarized into three classes: Filter method, Wrapper method, and Embedded method. In this work, we propose an integrated two-stage feature extraction method, referred to as FWS, which combines Filter and Wrapper method to efficiently extract important features in an innovative hybrid mode. FWS conducts the first level of selection to filter out non-related features using correlation analysis and the second level selection to find out the near-optimal sub set that capturing valuable discrete features by evaluating the performance of predictive model trained on such sub set. Compared with the technologies such as mRMR and Relief-F, FWS significantly improves the detection performance through an integrated optimization strategy.Results show the performance superiority of the proposed solution over several well-known methods for feature selection.

Predictive spatial-monitoring, which predicts spatial information such as road traffic, has attracted much attention in the context of smart cities. Machine learning enables predictive spatial-monitoring by using a large amount of aggregated sensor data. Since the capacity of mobile networks is strictly limited, serious transmission delays occur when loads of communication traffic are heavy. If some of the data used for predictive spatial-monitoring do not arrive on time, prediction accuracy degrades because the prediction has to be done using only the received data, which implies that data for prediction are ‘delay-sensitive’. A utility-based allocation technique has suggested modeling of temporal characteristics of such delay-sensitive data for prioritized transmission. However, no study has addressed temporal model for prioritized transmission in predictive spatial-monitoring. Therefore, this paper proposes a scheme that enables the creation of a temporal model for predictive spatial-monitoring. The scheme is roughly composed of two steps: the first involves creating training data from original time-series data and a machine learning model that can use the data, while the second step involves modeling a temporal model using feature selection in the learning model. Feature selection enables the estimation of the importance of data in terms of how much the data contribute to prediction accuracy from the machine learning model. This paper considers road-traffic prediction as a scenario and shows that the temporal models created with the proposed scheme can handle real spatial datasets. A numerical study demonstrated how our temporal model works effectively in prioritized transmission for predictive spatial-monitoring in terms of prediction accuracy.

In this paper, we explore the physical layer security of an Internet of Things (IoT) network comprised of multiple relay-user pairs in the presence of multiple malicious eavesdroppers and channel estimation error (CEE). In order to guarantee secure transmission with channel estimation error, we propose a channel estimation error oriented joint relay-user pair and friendly jammer selection (CEE-JRUPaFJS) scheme to improve the physical layer security of IoT networks. For the purpose of comparison, the channel estimation error oriented traditional round-robin (CEE-TRR) scheme and the channel estimation error oriented traditional pure relay-user pair selection (CEE-TPRUPS) scheme are considered as benchmark schemes. The exact closed-form expressions of outage probability (OP) and intercept probability (IP) for the CEE-TRR and CEE-TPRUPS schemes as well as the CEE-JRUPaFJS scheme are derived over Rayleigh fading channels, which are employed to characterize network reliability and security, respectively. Moreover, the security-reliability tradeoff (SRT) is analyzed as a metric to evaluate the tradeoff performance of CEE-JRUPaFJS scheme. It is verified that the proposed CEE-JRUPaFJS scheme is superior to both the CEE-TRR and CEE-TPRUPS schemes in terms of SRT, which demonstrates our proposed CEE-JRUPaFJS scheme are capable of improving the security and reliability performance of IoT networks in the face of multiple eavesdroppers. Moreover, as the number of relay-user pairs increases, CEE-TPRUPS and CEE-JRUPaFJS schemes offer significant increases in SRT. Conversely, with an increasing number of eavesdroppers, the SRT of all these three schemes become worse.

A modified whale optimization algorithm (MWOA) with dynamic leader selection mechanism and novel population updating procedure is introduced for pattern synthesis of linear antenna array. The current best solution is dynamic changed for each whale agent to overcome premature with local optima in iteration. A hybrid crossover operator is embedded in original algorithm to improve the convergence accuracy of solution. Moreover, the flow of population updating is optimized to balance the exploitation and exploration ability. The modified algorithm is tested on a 28 elements uniform linear antenna array to reduce its side lobe lever and null depth lever. The simulation results show that MWOA algorithm can improve the performance of WOA obviously compared with other algorithms.

In this paper, user scheduling with beam selection for full-digital massive multi-input multi-output (MIMO) is proposed. Inter-user interference (IUI) can be canceled by precoding such as zero-forcing at a massive MIMO base station if ideal hardware implementation is assumed. However, owing to the non-ideal characteristics of hardware components, IUI occurs among multiple user terminals allocated on the same resource. Thus, in the proposed scheme, the directions of beams for allocated user terminals are adjusted to maximize the total user throughput. User allocation based on the user throughput after the adjustment of beam directivity is then carried out. Numerical results obtained through computer simulation show that when the number of user terminals in the cell is two and the number of user terminals allocated to one resource block (RB) is two, the throughput per subcarrier per subframe improves by about 3.0 bits. On the other hand, the fairness index (FI) is reduced by 0.03. This is because only the probability in the high throughput region increases as shown in the cumulative distribution function (CDF) of throughput per user. Also, as the number of user terminals in the cell increases, the amount of improvement in throughput decreases. As the number of allocated user terminals increases, more user terminals are allocated to the cell-edge, which reduces the average throughput.

Various software fault prediction models have been proposed in the past twenty years. Many studies have compared and evaluated existing prediction approaches in order to identify the most effective ones. However, in most cases, such models and techniques provide varying results, and their outcomes do not result in best possible performance across different datasets. This is mainly due to the diverse nature of software development projects, and therefore, there is a risk that the selected models lead to inconsistent results across multiple datasets. In this work, we propose the use of bandit algorithms in cases where the accuracy of the models are inconsistent across multiple datasets. In the experiment discussed in this work, we used four conventional prediction models, tested on three different dataset, and then selected the best possible model dynamically by applying bandit algorithms. We then compared our results with those obtained using majority voting. As a result, Epsilon-greedy with ϵ=0.3 showed the best or second-best prediction performance compared with using only one prediction model and majority voting. Our results showed that bandit algorithms can provide promising outcomes when used in fault prediction.

Feature selection is important for learning algorithms, and it is still an open problem. Antlion optimizer is an excellent nature inspired method, but it doesn't work well for feature selection. This paper proposes a hybrid approach called Ant-Antlion Optimizer which combines advantages of antlion's smart behavior of antlion optimizer and ant's powerful searching movement of ant colony optimization. A mutation operator is also adopted to strengthen exploration ability. Comprehensive experiments by binary classification problems show that the proposed algorithm is superiority to other state-of-art methods on four performance indicators.

This paper provides theoretical analyses for maximum cyclic autocorrelation selection (MCAS)-based spectrum sensing techniques in cognitive radio networks. The MCAS-based spectrum sensing techniques are low computational complexity spectrum sensing in comparison with some cyclostationary detection. However, MCAS-based spectrum sensing characteristics have never been theoretically derived. In this study, we derive closed form solutions for signal detection probability and false alarm probability for MCAS-based spectrum sensing. The theoretical values are compared with numerical examples, and the values match well with each other.

Multi-cycle Test looks promising a way to reduce the test application time of POST (Power-on Self-Test) for achieving a targeted high fault coverage specified by ISO26262 for testing automotive devices. In this paper, we first analyze the mechanism of Stuck-at Fault Detection Degradation problem in multi-cycle test. Based on the result of our analysis we propose a novel solution named FF-Control Point Insertion technique (FF-CPI) to achieve the reduction of scan-in patterns by multi-cycle test. The FF-CPI technique modifies the captured values of scan Flip-Flops (FFs) during capture operation by directly reversing the value of partial FFs or loading random vectors. The FF-CPI technique enhances the number of detectable stuck-at faults under the capture patterns. The experimental results of ISCAS89 and ITC99 benchmarks validated the effectiveness of FF-CPI technique in scan-in pattern reduction for POST.

The communications quality of content delivery networks (CDNs), which are geographically distributed networks that have been optimized for content delivery, deteriorates when interflow congestion conditions are severe. Herein, we propose an adaptive server and path switching scheme that is based on the estimated acquisition throughput of each path. We also provide simulation results that show our proposed method can provide higher throughput performance levels than existing methods.

Sketch face recognition is to match sketch face images to photo face images. The main challenge of sketch face recognition is learning discriminative feature representations to ensure intra-class compactness and inter-class separability. However, traditional sketch face recognition methods encouraged samples with the same identity to get closer, and samples with different identities to be further, and these methods did not consider the intra-class compactness of samples. In this paper, we propose triplet-margin-center loss to cope with the above problem by combining the triplet loss and center loss. The triplet-margin-center loss can enlarge the distance of inter-class samples and reduce intra-class sample variations simultaneously, and improve intra-class compactness. Moreover, the triplet-margin-center loss applies a hard triplet sample selection strategy. It aims to effectively select hard samples to avoid unstable training phase and slow converges. With our approach, the samples from photos and from sketches taken from the same identity are closer, and samples from photos and sketches come from different identities are further in the projected space. In extensive experiments and comparisons with the state-of-the-art methods, our approach achieves marked improvements in most cases.

This paper presents a novel spectrum sensing technique based on selection diversity combining in cognitive radio networks. In general, a selection diversity combining scheme requires a period to select an optimal element, and spectrum sensing requires a period to detect a target signal. We consider that both these periods are required for the spectrum sensing based on selection diversity combining. However, conventional techniques do not consider both the periods. Furthermore, spending a large amount of time in selection and signal detection increases their accuracy. Because the required period for spectrum sensing based on selection diversity combining is the summation of both the periods, their lengths should be considered while developing selection diversity combining based spectrum sensing for a constant period. In reference to this, we discuss the spectrum sensing technique based on selection diversity combining. Numerical examples are shown to validate the effectiveness of the presented design techniques.