Macro/microcellular systems have recently been proposed to accommodate both fast and slow moving users. If macrocells and microcells reuse the same frequency band in a macro/microcellular system, the interference between both types of cells can become a critical problem and degrade system capacity, particularly in CDMA systems. In this paper, Frequency Division CDMA (FD-CDMA) is applied to CDMA macro/spot-microcellular systems and uplink capacity is evaluated. The CDMA frequency band is divided into several subbands and both macrocells and microcells reuse the same subbands simultaneously. Interference signals from both types of cells are dispersed by dividing the frequency band, and performance degradation resulting from interference is reduced at both the macrocell and microcell. By reusing the same frequency band for macrocells and microcells, the system capacities become more flexible and can be changed according to variations in traffic. This paper describes the detail of the FD-CDMA system. Uplink capacities are calculated for some cell conditions such as microcell size or location through simulation evaluations. A comparison with a non-reuse subband system as well as results of adaptive control of subbands are described.

We propose a new bit timing recovery (BTR) scheme, what we call Step Sampled BTR (SSBTR), that can lower the sampling clock frequency and shorten the clock phase convergence time, for burst signals in high bit rate wireless access systems. The SSBTR scheme has the following characteristics. A sine wave resulting from the BTR code passing through a Nyquist Transmission System is always used, the sampling clock has a lower frequency than the system clock, and the clock phase of Intermediate Frequency (IF) signal input can be estimated from as few as 3 sampled data. The SSBTR scheme corrects the clock phase only once in a burst signal. Therefore, in some wireless access systems, some kind of operation must be performed after the SSBTR, in order to deal with long burst signals, instability of the system clock, and so on. In other wireless access systems that do not have these problems, clock phase can be fixed by the SSBTR scheme alone. The preformance of the SSBTR scheme with respect to additive white Gaussian noise (AWGN) was examined by computer simulation. In addition, when SSBTR is implemented in hardware, there are imperfections in the circuitry that lead to phase estimation error and thus deterioration, so we studied the effects of several such imperfections by computer simulation. The results of these simulations clarify the performance of the SSBTR scheme.

This paper explores the potential of multiwave interconnectionsoptical interconnections that employ wavelength components as multiplexable information carriersfor constructing next-generation multiprocessor systems using MCM technology. A hypercube-based multiprocessor network called the multiwave hypercube (MWHC) is proposed, where multiwave interconnections provide highly-flexible dynamic communication channels among processing elements. A performance analysis shows that the use of multiwavelength optics makes possible the reduction of network complexity on an MCM substrate, while supporting low-latency message routing.

The segmentation of images into regions that have some common properties is a fundamental problem in low level computer vision. In this paper, the region growing method to segmentation is studied. In the study, a coarse to fine processing strategy is adopted to identify the homogeneity of the subregion of an image. The pixels in the image are checked by a nested triple-layer neighborhood system based hypothesis test. The pixels can then be classified into single pixels or grain pixels with different size and coarseness. Instead of using the global threshold to the region growing, local thresholds are determined adaptively for each pixel in the image. The strength of the proposed method lies in the fact that the thresholds are computed automatically. Experiments for synthetic and natural images show the efficiency of our method.

This study was conducted to assess the relationship between fatigue and pupillary responses. Pupillary responses, ECG and blood pressure were measured for 24 hours every 30 min in 8 subjects. A questionnaire was used to rate subjective feeling of fatigue. Twenty-four hours were divided equally into four 6-hour blocks. Subjective feeling of fatigue increased markedly in the fourth block, and the difference in subjective fatigue between fourth and first blocks was significant. Of nine pupillary responses, the pupil diameter was found to decrease with time. With respect to the function of the autonomic nervous system such as heart rate, systolic blood pressure and diastolic blood pressure, only heart rate was found to be sensitive to the increased subjective feeling of fatigue. A significant difference was found in the mean pupil diameter and mean heart rate between the last and first blocks. This result indicates that pupil diameter is related to fatigue and can be used to assess fatigue. Possible implications for fatigue assessment are discussed.

In contrast to previous algorithms for reconfiguring processor arrays under the assumption that spare rows and columns are placed on the perimeter of the array or on fixed positions, our new algorithm employs movable and partitionable spare rows and columns. The objective of moving and partitioning spare rows and/or columns is the elimination of faulty processors each of which is blocked in all directions to spare processors. The results of our computer simulation indicate that reconfigurability can significantly be improved.

We present a new method for the adaptive control of nonminimum phase continuous-time systems based on the pole-zero placement using approximate inverse systems to avoid the unstable pole-zero cancellations. Using this method effect of the unstable zeros cab be compensated approximately. We show how unstable pole-zoro cancellations can be avoided, and that this method has the advantage of being able to determine an approximate inverse system independently of the plant zeros. The proposed scheme uses only the available input and output data and the stability using approximate inverse systems is analyzed. Finally, the results of computer simulation are presented to illustrate the effectiveness of the proposed method.

Rapid advancing technology and customer demand for sophisticated services are driving the global telecommunications environment into fully competitive and multi service providers environment. To cope with this new environment successfully, open network and open telecommunication management are essential. Telecommunication management is becoming more and more important to realize flexible and dynamic telecommunication services. This paper first gives a view of the new environment in the telecommunication industry and discusses the direction to be taken by service providers. Then, a concept of multi-domain management is proposed to meet a dynamically changing environment. Finally, the paper describes the subjects for the development of telecommunication management system and suggests that a competition based on harmony between the users, service providers and vendors is needed to make customers satisfied with telecommunication services.

Dynamic Term Rewriting Calculus is a new computation model proposed by the authors for the purpose of formal description and verification of algorithms treating Term Rewriting Systems. The computation of DTRC is basically term rewriting. The characteristic features of DTRC are dynamic change of rewriting rules during computation and hierarchical declaration of not only function symbols and variables but also rewriting rules. These features allow us to program metacomputation of TRSs in DTRC, that is , we can implement in DTRC in a natural way those algorithms which manipulate term rewriting systems as well as those procedures which verify such algorithms. In this paper, we give a formal description of DTRC. We then show some results on confluence property of DTRC.

Electric fishes generate an AC electric field around themselves by the electric organ in the tail. Spatial distortion of the field by nearby objects is detected by an electroreceptor array located an over the body surface to localize the object electrically when other senses such as vision and mechanosense are useless. Each fish has its own 'frequency band' for its electric organ discharges, and jamming of the electrolocation system occurs when two fish with similar discharge frequencies encounter. To avoid janmming, the fish shift their discharge frequencies in appropriate directions. A computational algorithm for this electrical behavior and its neuronal implementation by the brain have been discovered. The design features of the system, however, are rather complex for this simple behavior and cannot be readily explained by functional optimization processes during evolution. To gain insights into the origin of the design features, two independently evolved electric fish species which perform the same behavior are compared. Complex features of the neuronal computation may be explained by the evolutionary history of neuronal elements.

This paper presents a discrete-time multiple short-time Fourier transform (MSTFT) suitable for a time-frequency analysis and synthesis of discrete-time nonstationary signals. An overcomplete set of multiple windows in used for a frame constitution in l2 (Z) so that higher quality signal analysis and perfect reconstruction of the signal are achieved. A design method for a prototype window is given where the window can satisfy regularity condition and have a flexible, good time and frequency characteristic under constraint of the uncertainty principle. A dual frame is constructed using the prototype windows in the framework of a frame operator method. Efficient implementation structures for the MSTFT and its inverse transform appropriate for real time numerical processing is presented. Simulation results are given to illustrate the effectiveness for design of the MSTFT. The performance advantages as a new signal analysis tool are demonstrated with an experimental signal.

As enterprises use ATM networks for their private networks and as these private networks use public ATM networks for wide area communication, the need for the customers to be able to manage both private and public networks is increasing. Currently, some standardization work is being done towards providing this capability to customers. In this paper, we propose a new customer network management (CNM) system architecture for the management of both private and public ATM networks in a uniform way. The particular features of the proposed architecture lies in the efficient support of the complex hierarchical TMN manager-agent relationships at M3 and M4 interfaces, and the support of SNMP and CMIP integration. The TMN hierarchical many-to-many manager-agent relationships are realized by the utilization of a CORBA-based Shared Management Knowledge (SMK) system. We have implemented a prototype of ATM CNM system, and measured the performance for the demonstration of the suitability of the proposed architecture.

A neural network approach called the "Gradual Neural Network (GNN)" for the time slot assignment problem in the TDM multicast switching system is presented in this paper. The goal of this NP-complete problem is to find an assignment of packet transmission requests into a minimum number of time slots. A packet can be transmitted from one source to several destinations simultaneously by its replication. A time slot represents a switching configuration of the system with unit time for each packet transmission through an I/O line. The GNN consists of the binary neural network and the gradual expansion scheme. The binary neural network satisfies the constraints imposed on the system by solving the motion equation, whereas the gradual expansion scheme minimizes the number of required time slots by gradually expanding activated neurons. The performance is evaluated through simulations in practical size systems, where the GNN finds far better solutions than the best existing altorithm.

An advanced intelligent network (IN) provides service management along with telecommunication services, and has a two-layer architecture, i.e., a transmission layer and an intelligent layer. An advanced IN's programmability is achieved by a service-independent platform of nodes in the intelligent layer, and service-dependent software called logic programs. In contrast to telecommunication services, models for service management have not yet been established. This paper presents both execution and specification models for service management. The execution model is composed of three hierarchies that apply to various kinds of management operation. The specification model has the capability to define the details of data items. The specification language for service management is also proposed. Simulation on dynamic SQL based DBMS solved that; (1) Logic programs for service management can be made small size on the model, and (2) To provide efficient database operation, programmability must be enhanced if service management includes table with variable number of field operation.

In this paper a cyclic place-timed controlled marked graph (PTCMG), which is an extended class of a cyclic controlled marked graph (CMG), is presented as a model of discrete event systems (DESs). In a PTCMG, time constraints are attached to places instead of transitions. The time required for a marked place to be marked again is represented in terms of time constraints attached to places. The times required for an unmarked place to be marked under various controls, are calculated. The necessary and sufficient condition for a current marking to be in the admissible marking set with respect to the given forbidden condition is provided, as is the necessary and sufficient condition for a current marking to be out of the admissible marking set with respect to the forbidden condition in one transition. A maximally permissive state feedback control is synthesized in a PTCMG to guarantee a larger admissible marking set than a CMG for most forbidden state problems. Practical applications are illustrated for a railroad crossing problem and an automated guided vehicle (AGV) coordination problem in a flexible manufacturing facility.

A GaAs SPDT switch IC operating at a low power supply voltage of 2.7 V has been developed for use in 1.9 GHz band personal handy phone system (PHS). In combination with MESFETs with low on-resistance and high breakdown voltage, the switch IC adopts parallel-LC resonant circuits and utilizes both stacked FETs and an additional shunt capacitor at the receiver side in order to realize low insertion loss, high isolation and low distortion characteristics. An insertion loss of 0.55 dB and an isolation of 35.8 dB were obtained at 1.9 GHz. The IC also achieved an output power of 25.0 dBm at 1 dB gain compression point, a second order distortion of -54.3 dBc and an adjacent channel leakage power of -66 dBc at 600 kHz apart from 1.9 GHz at 19 dBm output power.

We have developed a GaAs direct-conversion π/4 shifted QPSK modulator IC equipped with variable attenuators for controlling the output power level of the 1.9 GHz Personal Handy Phone system in Japan (PHS). The IC was successfully demonstrated showing state-of-the-art performance with the image rejection ratio of more than 36 dBc at a low input power of -10 dBm in 1.9 GHz frequency range. By using the "Gate Current Control method by Pull-down FET's" (GCCPF), the equipped attenuators vary the output power from 0 dB to -28 dB by 4 dB step. The IC operates at a 2.7 V supply with power dissipation of 259 mW. The 2.64.6 mm2 chip with about 400 elements was fabricated by a 0.5 µm WNx-gate BPLDD GaAs MESFET process.

We have studied the flowthrough operation to simplify operation processes and to promote the efficiency of operation flows. In this paper, we introduce the Construction Manager System (CMS) that cooperates with the ATM Transport Network Operation System (ATMOS). This system directs the construction processes using the construction tickets newly defined by the GDMO (Guidelines for the Definitions of Managed Objects); these tickets and action scenarios are prepared inside the SMS (Scenario Management System). We confirm that CMS can perform construction management using the construction tickets instead of the traditional off-line communications such as the telephone and the facsimile. Furthermore, because CMS cooperates with ATMOS, it is able to manage actual network elements (NEs) and conduct board costruction processes by using construction tickets. Moreover, CMS can confirm that the construction processes of the actual NEs have actually been executed through the Q3 interface. As a result, we verify the basic technique for flowthrough operation for configuration management.

Outage probability evaluation for a new category of wireless access systems is discussed. Wireless access systems dealt with in this paper are links which connect a portable terminal to a base station through a line-of-sight path. It is also assumed that the terminal equipment is operated in a still atate during actual communications. This mobility restriction enables the wireless access to have a capacity as high as the Mbit-order with high quality performance. Multipath fading observed in such a system may have more moderate variations than Rayleigh distribution. This paper tentatively designates the above wireless access as relocatable systems, and attempts to analyze their error performance, approximating the fading characteristics with Gamma-distribution. Also dynamic relations between bit error rate (BER) and signal-to-noise ratio are calculated under Gamma-distribution fading. Based on the analyses prediction methods for outage probability of typical QPSK systems are given, and thus it is established to design the performance aspect of relocatable systems with different features from both fixed and mobile systems.

Recently, a wavelength division multi/demultiplexing system has been viewed with keen interest because it is possible to increase the transmission capacity and system flexibility. An arrayed waveguide grating (AWG) type of Multi/demultiplexer which is one of the key components to realize such a system has been developed by using Planar Lightwave Circuits (PLCs). Newly designed optical circuits have been incorporated into the AWG to control the center wavelength and to expand the pass band width. The 3 dB pass band width is 1.4 times that of a conventional AWG. It is confirmed that the newly developed AWG has low polarization dependence, low temperature dependence and high reliability.