In order to optimize the performance of thermoelectric devices, we have fabricated and characterized the micrometer-scaled Si thermopile preserving the phonon-drag effect, where the Si thermopile consists of p- and n-type Si wire pairs. The measured Seebeck coefficient of the p-type Si wire was found to be higher than the theoretical value calculated only from the carrier transport, which indicates the contribution of phonon-drag part. Moreover, the measured Seebeck coefficient increased with increasing the width of Si wire. This fact is considered due to dependency of phonon-drag part on the wire width originating from the reduction of phonon-boundary scattering. These contributions were observed also in measured output voltage of Si-wire thermopile. Hence, the output voltage of Si-wire thermopile is expected can be enhanced by utilizing the phonon-drag effect in Si wire by optimizing its size and carrier concentration.

Data-driven untying of a recursive autoencoder (RAE) is proposed for utterance intent classification for spoken dialogue systems. Although an RAE expresses a nonlinear operation on two neighboring child nodes in a parse tree in the application of spoken language understanding (SLU) of spoken dialogue systems, the nonlinear operation is considered to be intrinsically different depending on the types of child nodes. To reduce the gap between the single nonlinear operation of an RAE and intrinsically different operations depending on the node types, a data-driven untying of autoencoders using part-of-speech (PoS) tags at leaf nodes is proposed. When using the proposed method, the experimental results on two corpora: ATIS English data set and Japanese data set of a smartphone-based spoken dialogue system showed improved accuracies compared to when using the tied RAE, as well as a reasonable difference in untying between two languages.

Hydrophobic DNA (H-DNA) nano-film was formed as the surface modifier on a thin glass plate working as a slab optical waveguide (SOWF). Cytochrom c (cytc) molecules were immobilized from aqueous solution with direct contacting to the H-DNA nano-film for 30 minutes. From SOWG absorption spectral changes during automated solution exchange (SE) processes, it was found that about 28.1% of cytc molecules was immobilized in the H-DNA nano-film with keeping their reduction functionality by reducing reagent.

Android malwares are rapidly becoming a potential threat to users. Among several Android malware detection schemes, the scheme using Inter-Component Communication (ICC) is gathering attention. That scheme extracts numerous ICC-related features to detect malwares by machine learning. In order to mitigate the degradation of detection performance caused by redundant features, Correlation-based Feature Selection (CFS) is applied to feature before machine learning. CFS selects useful features for detection in accordance with the theory that a good feature subset has little correlation with mutual features. However, CFS may remove useful ICC-related features because of strong correlation between them. In this paper, we propose an effective feature selection scheme for Android ICC-based malware detection using the gap of the appearance ratio. We argue that the features frequently appearing in either benign apps or malwares are useful for malware detection, even if they are strongly correlated with each other. To select useful features based on our argument, we introduce the proportion of the appearance ratio of a feature between benign apps and malwares. Since the proportion can represent whether a feature frequently appears in either benign apps or malwares, this metric is useful for feature selection based on our argument. Unfortunately, the proportion is ineffective when a feature appears only once in all apps. Thus, we also introduce the difference of the appearance ratio of a feature between benign apps and malwares. Since the difference simply represents the gap of the appearance ratio, we can select useful features by using this metric when such a situation occurs. By computer simulation with real dataset, we demonstrate our scheme improves detection accuracy by selecting the useful features discarded in the previous scheme.

A Brillouin optical correlation domain reflectometry (BOCDR) system, which can set measuring point to arbitrary distance that is aligned in a random order along an optical fiber (i.e., random accessibility), is proposed to measure dynamic strain and experimentally evaluated. This random-access system can allocate measurement bandwidth to measuring point by assigning the measurement times at each measuring point of the total number of strain measurements. This assigned number is not always equally but as necessary for plural objects with different natural frequencies. To verify the system, strain of two vibrating objects with different natural frequencies was measured by one optical fiber which is attached to those objects. The system allocated appropriate measurement bandwidth to each object and simultaneously measured dynamic strain corresponding to the vibrating objects.

We propose an object detector using a sliding window method for an event-driven camera which outputs a subtracted frame (usually a binary value) when changes are detected in captured images. Since sliding window skips unchanged portions of the output, the number of target object area candidates decreases dramatically, which means that our system operates faster and with lower power consumption than a system using a straightforward sliding window approach. Since the event-driven camera output consists of binary precision frames, an all binarized convolutional neural network (ABCNN) can be available, which means that it allows all convolutional layers to share the same binarized convolutional circuit, thereby reducing the area requirement. We implemented our proposed method on the Xilinx Inc. Zedboard and then evaluated it using the PETS 2009 dataset. The results showed that our system outperformed BCNN system from the viewpoint of detection performance, hardware requirement, and computation time. Also, we showed that FPGA is an ideal method for our system than mobile GPU. From these results, our proposed system is more suitable for the embedded systems based on stationary cameras (such as security cameras).

This paper presents an ultra-low-power class-AB bulk-driven operational transconductance amplifier operating in the subthreshold region. Employing the partial positive feedback in current mirrors, the effective transconductance and output voltage swing are enhanced considerably without additional power consumption and layout area. Both traditional and proposed OTAs are designed and simulated for a 180 nm CMOS process. They dissipate an ultra low power of 192 nW. The proposed OTA features not only a DC gain enhancement of 14 dB but also a slew rate improvement of 200%. In addition, the improved gain leads to a 5.3 times wider unity-gain bandwidth than that of the traditional OTA.

This paper investigates the wireless information surveillance in a suspicious millimeter wave (mmWave) wireless communication system via the spoofing relay based proactive eavesdropping approach. Specifically, the legitimate monitor in the system acts as a relay to simultaneously eavesdrop and send spoofing signals to vary the source transmission rate. To maximize the effective eavesdropping rate, an optimization problem for both hybrid precoding design and power distribution is formulated. Since the problem is fractional and non-convex, we resort to the Dinkelbach method to equivalently reduce the original problem into a series of non-fractional problems, which is still coupling. Afterwards, based on the BCD-type method, the non-fractional problem is reduced to three subproblems with two introduced parameters. Then the GS-PDD-based algorithm is proposed to obtain the optimal solution by alternately optimizing the three subproblems and simultaneously updating the introduced parameters. Numerical results verify the effectiveness and superiority of our proposed scheme.

Link-level and node-level blocking in photonic networks has been intensively investigated for several decades and the C/D/C approach to OXCs/ROADMs is often emphasized. However, this understanding will have to change in the future large traffic environment. We herein elucidate that exploiting node-level blocking can yield cost-effective large-capacity wavelength routing networks in the near future. We analyze the impact of link-level and node-level blocking in terms of traffic demand and assess the fiber utilization and the amount of hardware needed to develop OXCs/ROADMs, where the necessary number of link fibers and that of WSSs are used as metrics. We clarify that the careful introduction of node-level blocking is the more effective direction in creating future cost effective networks; compared to C/D/C OXCs/ROADMs, it offers a more than 70% reduction in the number of WSSs while the fiber increment is less than ~2%.

This paper presents a 6th-order quadrature bandpass delta sigma AD modulator (QBPDSM) with 2nd-order image rejection using dynamic amplifier and noise coupling (NC) SAR quantizer embedded by passive adder for the application of wireless communication system. A novel complex integrator using dynamic amplifier is proposed to improve the energy efficiency of the QBPDSM. The NC SAR quantizer can realize an additional 2nd-order noise shaping and 2nd-order image rejection by the digital domain noise coupling technique. As a result, the 6th-order QBPDSM with 2nd-order image rejection is realized by two complex integrators using dynamic amplifier and the NC SAR quantizer. The SPICE simulation results demonstrate the feasibility of the proposed QBPDSM in 90nm CMOS technology. Simulated SNDR of 76.30dB is realized while a sinusoid -3.25dBFS input is sampled at 33.3MS/s and the bandwidth of 2.083MHz (OSR=8) is achieved. The total power consumption in the modulator is 6.74mW while the supply voltage is 1.2V.

Many users are exposed to threats of drive-by download attacks through the Web. Attackers compromise vulnerable websites discovered by search engines and redirect clients to malicious websites created with exploit kits. Security researchers and vendors have tried to prevent the attacks by detecting malicious data, i.e., malicious URLs, web content, and redirections. However, attackers conceal parts of malicious data with evasion techniques to circumvent detection systems. In this paper, we propose a system for detecting malicious websites without collecting all malicious data. Even if we cannot observe parts of malicious data, we can always observe compromised websites. Since vulnerable websites are discovered by search engines, compromised websites have similar traits. Therefore, we built a classifier by leveraging not only malicious but also compromised websites. More precisely, we convert all websites observed at the time of access into a redirection graph and classify it by integrating similarities between its subgraphs and redirection subgraphs shared across malicious, benign, and compromised websites. As a result of evaluating our system with crawling data of 455,860 websites, we found that the system achieved a 91.7% true positive rate for malicious websites containing exploit URLs at a low false positive rate of 0.1%. Moreover, it detected 143 more evasive malicious websites than the conventional content-based system.

Technological developments in direction control of axonal outgrowth are a must for advances in regenerative medicine of the nervous system. In order to solve the problem, we fabricate a new neural cell culture sheet by applying the soft lithography technique to micro-patterning of the extracellular matrix and using thin-film biodegradable polymer for the scaffold. Micro-trenches were coated with Dulbecco's phosphate-buffered saline (-) containing laminin, using micro-molding in capillaries (MIMIC), a soft lithography technique. Biodegradable thin films with micro-trenches were fabricated by UV-curing a polyanhydride solution covering the negative SU-8 mold through thiol-ene polymerization. Both approaches were performed conveniently, rapidly, and accurately. It is thought that these techniques are excellent in terms of convenience and high speed, and can contribute greatly to regenerative medicine.

Hydrophobic DNA (H-DNA) nano-film was formed on a thin glass plate of 50μm thick working as a slab optical waveguide. Bromothymol blue (BTB) molecules were immobilized from aqueous solution with direct contacting to the H-DNA nano-film for 20 minutes. From changes in absorption spectra observed with slab optical wave guide (SOWG) during automated solution exchange (SE) processes for 100 times, it was found that about 95% of bromothymol blue (BTB) molecules was immobilized in the H-DNA nano-film with keeping their functionality of color change responsible to pH change in the solution.

This paper presents various Iterative Progressive Numerical Methods (IPNMs) for the computation of electromagnetic (EM) wave scattering from many objects. We previously modified the original IPNM from the standpoint of the classical and the IDR-based linear iterative solvers. We demonstrate the performance of the IDR(s)-based IPNMs through some numerical examples of EM wave scattering from regularly placed 27 perfectly electric conducting spheres.

Traffic matrix (TM) estimation has been extensively studied for decades. Although conventional estimation techniques assume that traffic volumes are unchanged between origins and destinations, packets are often lost on a path due to traffic burstiness, silent failures, etc. Counting every path at every link, we could easily get the traffic volumes with their change, but this approach significantly increases the measurement cost since counters are usually implemented using expensive memory structures like a SRAM. This paper proposes a mathematical model to estimate TMs including volume changes. The method is established on a Boolean fault localization technique; the technique requires fewer counters as it simply determines whether each link is lossy. This paper extends the Boolean technique so as to deal with traffic volumes with error bounds that requires only a few counters. In our method, the estimation errors can be controlled through parameter settings, while the minimum-cost counter placement is determined with submodular optimization. Numerical experiments are conducted with real network datasets to evaluate our method.

Many linear codes with two or three weights have recently been constructed due to their applications in consumer electronics, communication, data storage system, secret sharing, authentication codes, association schemes, and strongly regular graphs. In this paper, two classes of p-ary linear codes with two or three weights are presented. The first class of linear codes with two or three weights is obtained from a certain non-quadratic function. The second class of linear codes with two weights is obtained from the images of a certain function on $mathbb{F}_{p^m}$. In some cases, the resulted linear codes are optimal in the sense that they meet the Griesmer bound.

The number of infected hosts on enterprise networks has been increased by drive-by download attacks. In these attacks, users of compromised popular websites are redirected toward websites that exploit vulnerabilities of a browser and its plugins. To prevent damage, detection of infected hosts on the basis of proxy logs rather than blacklist-based filtering has started to be researched. This is because blacklists have become difficult to create due to the short lifetime of malicious domains and concealment of exploit code. To detect accesses to malicious websites from proxy logs, we propose a system for detecting malicious URL sequences on the basis of three key ideas: focusing on sequences of URLs that include artifacts of malicious redirections, designing new features related to software other than browsers, and generating new training data with data augmentation. To find an effective approach for classifying URL sequences, we compared three approaches: an individual-based approach, a convolutional neural network (CNN), and our new event de-noising CNN (EDCNN). Our EDCNN reduces the negative effects of benign URLs redirected from compromised websites included in malicious URL sequences. Evaluation results show that only our EDCNN with proposed features and data augmentation achieved a practical classification performance: a true positive rate of 99.1%, and a false positive rate of 3.4%.

An efficient two-layer coding method using the histogram packing technique with the backward compatibility to the legacy JPEG is proposed in this paper. The JPEG XT, which is the international standard to compress HDR images, adopts two-layer coding scheme for backward compatibility to the legacy JPEG. However, this two-layer coding structure does not give better lossless performance than the other existing methods for HDR image compression with single-layer structure. Moreover, the lossless compression of the JPEG XT has a problem on determination of the coding parameters; The lossless performance is affected by the input images and/or the parameter values. That is, finding appropriate combination of the values is necessary to achieve good lossless performance. It is firstly pointed out that the histogram packing technique considering the histogram sparseness of HDR images is able to improve the performance of lossless compression. Then, a novel two-layer coding with the histogram packing technique and an additional lossless encoder is proposed. The experimental results demonstrate that not only the proposed method has a better lossless compression performance than that of the JPEG XT, but also there is no need to determine image-dependent parameter values for good compression performance without losing the backward compatibility to the well known legacy JPEG standard.

Permission warnings and privacy policy enforcement are widely used to inform mobile app users of privacy threats. These mechanisms disclose information about use of privacy-sensitive resources such as user location or contact list. However, it has been reported that very few users pay attention to these mechanisms during installation. Instead, a user may focus on a more user-friendly source of information: text description, which is written by a developer who has an incentive to attract user attention. When a user searches for an app in a marketplace, his/her query keywords are generally searched on text descriptions of mobile apps. Then, users review the search results, often by reading the text descriptions; i.e., text descriptions are associated with user expectation. Given these observations, this paper aims to address the following research question: What are the primary reasons that text descriptions of mobile apps fail to refer to the use of privacy-sensitive resources? To answer the research question, we performed empirical large-scale study using a huge volume of apps with our ACODE (Analyzing COde and DEscription) framework, which combines static code analysis and text analysis. We developed light-weight techniques so that we can handle hundred of thousands of distinct text descriptions. We note that our text analysis technique does not require manually labeled descriptions; hence, it enables us to conduct a large-scale measurement study without requiring expensive labeling tasks. Our analysis of 210,000 apps, including free and paid, and multilingual text descriptions collected from official and third-party Android marketplaces revealed four primary factors that are associated with the inconsistencies between text descriptions and the use of privacy-sensitive resources: (1) existence of app building services/frameworks that tend to add API permissions/code unnecessarily, (2) existence of prolific developers who publish many applications that unnecessarily install permissions and code, (3) existence of secondary functions that tend to be unmentioned, and (4) existence of third-party libraries that access to the privacy-sensitive resources. We believe that these findings will be useful for improving users' awareness of privacy on mobile software distribution platforms.

Recently, IoT compatible products have been popular, and various kinds of things are IoT compliant products. In these devices, cryptosystems and authentication are not treated properly, and security measures for IoT devices are not sufficient. Requirements of authentication for IoT devices are power saving and one-to-many communication. In this paper, we propose a zero-knowledge identification scheme using LDPC codes. In the proposed scheme, the zero-knowledge identification scheme that relies on the binary syndrome decoding problem is improved and the computational cost of identification is reduced by using the sparse parity-check matrix of the LDPC codes. In addition, the security level, computational cost and safety of the proposed scheme are discussed in detail.