This paper proposes route advertisement policies (RAP) and an inbound traffic engineering (ITE) technique for a multihomed autonomous system (AS) employing the Border Gateway Protocol (BGP) and provider aggregatable (PA) addressing. The proposed RAP avail the advantage of address aggregation benefit of PA addressing. If multiple address spaces are allocated to each of the ASes that are multihomed to multiple upstream ASes, reduction of the forwarding information base (FIB) and quick convergence are achieved. However, multihoming based on PA addressing raises two issues. First, more specific address information is hidden due to address aggregation. Second, multiple allocated address spaces per AS does not provide the capability of ITE. To cope with these two limitations, we propose i) RAP to ensure connectivity among ASes with fewer routes installed in the FIB of each top-tier AS, and ii) an ITE technique to control inbound routes into multihomed ASes. Our ITE technique does not increase the RIB and FIB sizes in the Internet core. We implement the proposed RAP in an emulation environment with BGP using the Quagga software suite and our developed Hierarchical Automatic Number Allocation (HANA) protocols. We use HANA as a tool to automatically allocate hierarchical PA addresses to ASes. We confirm that with our proposed policies the FIB and RIB (routing information base) sizes in tier-1 ASes do not change with the increase of tier-3 ASes, and the number of BGP update messages exchanged is reduced by up to 69.9% from that achieved with conventional BGP RAP. We also confirmed that our proposed ITE technique, based on selective prefix advertisement, can indeed control inbound traffic into a multihomed AS employing PA addressing.

In this research, we propose an effective stability analysis method to impacting systems with periodically moving borders (periodic borders). First, we describe an n-dimensional impacting system with periodic borders. Subsequently, we present an algorithm based on a stability analysis method using the monodromy matrix for calculating stability of the waveform. This approach requires the state-transition matrix be related to the impact phenomenon, which is known as the saltation matrix. In an earlier study, the expression for the saltation matrix was derived assuming a static border (fixed border). In this research, we derive an expression for the saltation matrix for a periodic border. We confirm the performance of the proposed method, which is also applicable to systems with fixed borders, by applying it to an impacting system with a periodic border. Using this approach, we analyze the bifurcation of an impacting system with a periodic border by computing the evolution of the stable and unstable periodic waveform. We demonstrate a discontinuous change of the periodic points, which occurs when a periodic point collides with a border, in the one-parameter bifurcation diagram.

Distributed Reflective Denial of Services (DRDoS) attacks have gained huge popularity and become a major factor in a number of massive cyber-attacks. Usually, the attackers launch this kind of attack with small volume of requests to generate a large volume of attack traffic aiming at the victim by using IP spoofing from legitimate hosts. There have been several approaches, such as static threshold based approach and confirmation-based approach, focusing on DRDoS attack detection at victim's side. However, these approaches have significant disadvantages: (1) they are only passive defences after the attack and (2) it is hard to trace back the attackers. To address this problem, considerable attention has been paid to the study of detecting DRDoS attack at source side. Because the existing proposals following this direction are supposed to be ineffective to deal with small volume of attack traffic, there is still a room for improvement. In this paper, we propose a novel method to detect DRDoS attack request traffic on SDN(Software Defined Network)-enabled gateways in the source side of attack traffic. Our method adjusts the sampling rate and provides a traffic-aware adaptive threshold along with the margin based on analysing observed traffic behind gateways. Experimental results show that the proposed method is a promising solution to detect DRDoS attack request in the source side.

This letter considers a legitimate proactive eavesdropping scenario, where a half-duplex legitimate monitor hires a third-party jammer for jamming the suspicious communication to improve the eavesdropping performance. The interaction between the third-party jammer and the monitor is modeled as a Stackelberg game, where the jammer moves first and sets the price for jamming the suspicious communication, and then the legitimate monitor moves subsequently and determines the requested transmit power of the jamming signals. We derive the optimal jamming price and the optimal jamming transmit power. It is shown that the proposed price-based proactive eavesdropping scheme is effective in improving the successful eavesdropping probability compared to the case without jamming. It is also shown that the proposed scheme outperforms the existing full-duplex scheme when the residual self-interference cannot be neglected.

In recent years, the number of traffic accidents caused by elderly drivers has increased in Japan. However, cars are an important mode of transportation for the elderly. Therefore, to ensure safe driving, a system that can assist elderly drivers is required. We propose a driver-agent system that provides support to elderly drivers during and after driving and encourages them to improve their driving. This paper describes the prototype system and the analysis conducted of the teaching records of a human instructor, the impression caused by the instructions on a subject during driving, and subjective evaluation of the driver-agent system.

We propose an estimation method of pedestrian detectability considering the driver's visual adaptation to drastic illumination change, which has not been studied in previous works. We assume that driver's visual characteristics change in proportion to the elapsed time after illumination change. In this paper, as a solution, we construct multiple estimators corresponding to different elapsed periods, and estimate the detectability by switching them according to the elapsed period. To evaluate the proposed method, we construct an experimental setup to present a participant with illumination changes and conduct a preliminary simulated experiment to measure and estimate the pedestrian detectability according to the elapsed period. Results show that the proposed method can actually estimate the detectability accurately after a drastic illumination change.

This work presents a hybrid formulation of the stochastic reduced order model (SROM) algorithm, which makes use of Gauss quadrature, a key ingredient of the stochastic collocation method, to avoid the cumbersome optimization process required by SROM for optimal extraction of the sample set. With respect to classic SROM algorithms, the proposed formulation allows a significant reduction in computation time and burden as well as a remarkable improvement in the accuracy and convergence rate in the estimation of statistical moments. The method is here applied to a specific case study, that is the prediction of crosstalk in a two-conductor wiring structure with electrical and geometrical parameters not perfectly known. Both univariate and multivariate analyses are carried out, with the final objective being to compare the performance of the two SROM formulations with respected to Monte Carlo simulations.

NAND flash memories used in solid-state drives (SSDs) will be replaced with storage-class memories (SCMs), which are comparable with NAND flash in their cost, and with DRAM in their speed. This paper describes the performance difference of the SCM/NAND flash hybrid SSD and the SCM-based SSD with between sector-unit read (512 Byte) and page-unit read (16 KByte, NAND flash page-size) using synthetic and real workload. Also, effect of the SCM read-unit size on SSD performance are analyzed. When SCM write/read latency is 0.1 us, performance difference of the SCM/NAND flash hybrid SSD with between page- and sector-unit read is about 1% and 6% at most for the write-intensive and read-intensive workloads, respectively. However, performance of the SCM-based SSD is significantly improved when sector-unit read is used because extra read latency does not occur. Especially, the SCM-based SSD IOPS is improved by 131% for proj_3 (read-hot-random), because its read request size is small but its read request ratio is large. This paper also shows IOPS of SCM-based SSD write/read with sector-unit read can be predicted by the average write/read request size of workloads.

We present an 82.5GS/s over-sampling based burst-mode clock and data recovery (BM-CDR) IC chip-set comprising an 82.5GS/s over-sampling IC using 8×10.3GHz multi-phase clocks and a dual-rate data selector logic IC to realize the 10.3Gb/s and 1.25Gb/s dual-rate burst-mode fast-lock operation required for 10-Gigabit based fiber-to-the-x (FTTx) services supported by 10-Gigabit Ethernet passive optical network (10G-EPON) systems. As the key issue for designing the proposed 82.5GS/s BM-CDR, a fresh study of the optimum number of multi-phase clocks, which is equivalent to the sampling resolution, is undertaken, and details of the 10.3Gb/s cum 1.25/Gb/s dual-rate optimum phase data selection logic based on a blind phase decision algorithm, which can realize a full single-platform dual-rate BM-CDR, ate also presented. By using the power of the proposed 82.5GS/s over-sampling BM-CDR in cooperation with our dual-rate burst-mode optical receiver, we further demonstrated that a short dual-rate and burst-mode preamble of 256ns supporting receiver settling and CDR recovery times was successfully achieved, while obtaining high receiver sensitivities of -31.6dBm at 10.3Gb/s and -34.6dBm at 1.25Gb/s and a high pulse-width distortion tolerance of +/-0.53UI, which are superior to the 10G-EPON standard.

In order to reduce the memory cell errors in real-usage of NAND flash-based SSD, real usage-based precise reliability test for NAND flash of SSDs has been proposed. Reliability of the NAND flash memories of the SSDs is seriously degraded as the scaling of memory cells. However, conventional simple reliability tests of read-disturb and data-retention cannot give the same result as the real-life VTH shift and memory cell errors. To solve this problem, the proposed reliability test precisely reproduces the real memory cell failures by emulating the complicated read, write, and data-retention with SSD emulator. In this paper, the real-life VTH shift and memory cell errors between two generations of NAND flash memory with different characterized real workloads are provided. Using the proposed test method, 1.6-times BER difference is observed when write-cold and read-hot workload (hm_1) and write-hot and read-hot workload (prxy_1) are compared in 1Ynm MLC NAND flash. In addition, by NAND flash memory scaling from 1Xnm to 1Ynm generations, the discrepancy of error numbers between the conventional reliability test result and actual reliability measured by proposed reliability test is increased by 6.3-times. Finally, guidelines for read reference voltage shifts and strength of ECCs are given to achieve high memory cell reliability for various workloads.

In this paper, a new and an accurate symbol error probability's analytical model of Rectangular Quadrature Amplitude Modulation in α-µ fading channel is presented for single-user single-input multi-output environment, which can be easily extended to generalized fading channels. The maximal-ratio combining technique is utilized at the receiving end and unified moment generating functions are used to derivate the results. The fading mediums considered are independent and non-identical. The mathematical model presented is applicable for slow and frequency non-selective fading channels only. The final expression is presented in terms of Meijer G-function; it contains single integrals with finite limits to evaluate the mathematical expressions with numerical techniques. The beauty of the model will help evaluate symbol error probability of rectangular quadrature amplitude modulation with spatial diversity over various fading mediums not addressed in this article. To check for the validity of derived analytical expressions, comparison is made between theoretical and simulation results at the end.

In this letter, we propose a generalized quadrature spatial modulation technique (GQSM) which offers additional bits per channel use (bpcu) gains and a low complexity greedy detector algorithm, structured orthogonal matching pursuit (S-OMP)- GQSM, based on compressive sensing (CS) framework. Simulation results show that the bit error rate (BER) performance of the proposed greedy detector is very close to maximum likelihood (ML) and near optimal detectors based on convex programming.

A memory controller refreshes DRAM rows periodically in order to prevent DRAM cells from losing data over time. Refreshes consume a large amount of energy, and the problem becomes worse with the future larger DRAM capacity. Previously proposed selective refreshing techniques are either conservative in exploiting the opportunity or expensive in terms of required implementation overhead. In this paper, we propose a novel DRAM selective refresh technique by using page residence in a memory hierarchy of hardware-managed TLB. Our technique maximizes the opportunity to optimize refreshing by activating/deactivating refreshes for DRAM pages when their PTEs are inserted to/evicted from TLB or data caches, while the implementation cost is minimized by slightly extending the existing infrastructure. Our experiment shows that the proposed technique can reduce DRAM refresh power 43.6% on average and EDP 3.5% with small amount of hardware overhead.

To reduce the backbone video traffic generated by video surveillance, we propose an intelligent video surveillance system that offers multi-modal sensor-based event detection and event-driven video rate adaptation. Our proposed system can detect pedestrian existence and movements in the monitoring area by using multi-modal sensors (camera, laser scanner and infrared distance sensor) and control surveillance video quality according to the detected events. We evaluate event detection accuracy and video traffic volume in the experiment scenarios where up to six pedestrians pass through and/or stop at the monitoring area. Evaluation results conclude that our system can significantly reduce video traffic while ensuring high-quality surveillance.

This paper proposes a technique for broadcasting control of Smart Air Conditioners (SACs) by implementing the Narrowband Powerline Communications (NB-PLC) technology. The Master Control Room (MCR) generates commands for SACs operation that are sent over power lines by using the communication protocol known as Smart Energy Profile 1.0 (SEP 1.0). The proposed system can also offers features like Demand Response (DR) to facilitate the Smart Grid (SG). Field measurements elucidate the performance of NB-PLC systems. Measurements are carried out by injecting and receiving the NB-PLC signal over low voltage (LV) power lines, medium voltage (MV) power lines and across transformers. A hybrid communication system, NB-PLC integrated with Optical Fiber Network (OFN), is developed for the automation of Distribution System (DS) of Lahore Electric Supply Company (LESCO). The developed system was tested for the DR program in order to support the Smart Air Conditioning system within Lahore. It is suggested that by adjusting the commercial SACs parameters, the task of energy conservation can be achieved by optimizing the peak load curves for greater efficiency. Moreover, data of various types of appliances can also be communicated to the MCR for the purpose of demand side management.

Advanced driver assistance system (ADAS) can recognize traffic signals, vehicles, pedestrians, and so on all over the vehicle. However, because the ADAS is based on images taken in an outdoor environment, it is susceptible to ambient weather such as fog. So, preprocessing such as de-fog and de-hazing techniques is required to prevent degradation of object recognition performance due to decreased visibility. But, if such a fog removal technique is applied in an environment where there is little or no fog, the visual quality may be deteriorated due to excessive contrast improvement. And in foggy road environments, typical fog removal algorithms suffer from color distortion. In this paper, we propose a temporal filter-based fog detection algorithm to selectively apply de-fogging method only in the presence of fog. We also propose a method to avoid color distortion by detecting the sky region and applying different methods to the sky region and the non-sky region. Experimental results show that in the actual images, the proposed algorithm shows an average of more than 97% fog detection accuracy, and improves subjective image quality of existing de-fogging algorithms. In addition, the proposed algorithm shows very fast computation time of less than 0.1ms per frame.

High dynamic range (HDR) images contain more details of the scene as compared to commonly used low dynamic range (LDR) images. The additional information in the HDR images is important for applications such as high-quality graphics rendering, sensing, scene analysis, and surveillance etc. Moreover, HDR images would provide better visualization experience on HDR displays, which might become more common in near future. Therefore, it is important to encode the entire dynamic range of the HDR images. In this paper, a new lossless, four-channel, eight bits per channel, format for encoding floating-point HDR images is proposed. The format is similar to the well-known RGBE format but constructs the E channel differently for better accuracy. Experimental results show that our technique could reduce the rounding error of the RGBE by more than 88%. In addition, there was a reduction of 44.3% in average error for all 33 images in the database used for this study.

This paper studies a simultaneous wireless information and power transfer (SWIPT) system in which the transmitter not only sends data and energy to many types of wireless users, such as multiple information decoding users, multiple hybrid power-splitting users (i.e., users with a power-splitting structure to receive both information and energy), and multiple energy harvesting users, but also prevents information from being intercepted by a passive eavesdropper. The transmitter is equipped with multiple antennas, whereas all users and the eavesdropper are assumed to be equipped with a single antenna. Since the transmitter does not have any channel state information (CSI) about the eavesdropper, artificial noise (AN) power is maximized to mask information as well as to interfere with the eavesdropper as much as possible. The non-convex optimization problem is formulated to minimize the transmit power satisfying all signal-to-interference-plus-noise (SINR) and harvested energy requirements for all users so that the remaining power for generating AN is maximized. With perfect CSI, a semidefinite relaxation (SDR) technique is applied, and the optimal solution is proven to be tight. With imperfect CSI, SDR and a Gaussian randomization algorithm are proposed to find the suboptimal solution. Finally, numerical performance with respect to the maximum SINR at the eavesdropper is determined by a Monte-Carlo simulation to compare the proposed AN scenario with a no-AN scenario, as well as to compare perfect CSI with imperfect CSI.

This paper proposes a method for reducing the peak-to-average power ratio (PAPR) at the output signal of a digital predistortion linearizer (DPDL) that compensates for frequency dependent intermodulation distortion (IMD) components. The proposed method controls the amplitude and phase values of the frequency components corresponding to the transmission bandwidth of the output signal. A DPDL employing the proposed method simultaneously provides IMD component cancellation of out-of-band components and PAPR reduction at the output signal. This paper identifies the amplitude and phase conditions to minimize the PAPR. Experimental results based on a 2-GHz band 1-W class power amplifier show that the proposed method improves the drain efficiency of the power amplifier when degradation is allowed in the error vector magnitude. To the best knowledge of the authors, this is the first PAPR reduction method for DPDL that reduces the PAPR while simultaneously compensating for IMD components.

This paper describes the design and experiment results of a 25Gbps vertical-cavity surface emitting laser (VCSEL) driver circuit for a multi channel optical transmitter. To compensate for the non-linearity of the VCSEL and achieve high speed data rate communication, an asymmetric pre-emphasis technique is proposed for the VCSEL driver. An asymmetric pre-emphasis signal can be created by adjusting the duty ratio of the emphasis signal. The VCSEL driver adopts a double cascode connection that can apply a drive current from a high voltage DC bias and feed-forward compensation that can enhance the band-width for common-cathode VCSEL. For the design of the optical module structure, a two-tier low temperature co-fired ceramics (LTCC) package is adopted to minimize the wire bonding between the signal pad on the LTCC and the anode pad on the VCSEL. This structure and circuit reduces the simulated deterministic jitter from 12.7 to 4.1ps. A test chip was fabricated with the 65-nm standard CMOS process and demonstrated to work as an optical transmitter. An experimental evaluation showed that this VCSEL driver with asymmetric pre-emphasis reduced the total deterministic jitter up to 8.6ps and improved the vertical eye opening ratio by 3% compared with symmetric pre-emphasis at 25Gbps with a PRBS=29-1 test signal. The power consumption of the VCSEL driver was 3.0mW/Gbps/ch at 25Gbps. An optical transmitter including the VCSEL driver achieved 25-Gbps, 4-ch fully optical links.