Triboelectric generator is attracting much attention as a power source of electronics application. Electromotive force induced by rubbing is a key for triboelectric generator. From dielectric physics point of view, there are two microscopic origins for electromotive force, i.e., electronic charge displacement and dipolar rotation. A new way for evaluating these two origins is an urgent task. We have been developing an optical second-harmonic generation (SHG) technique as a tool for probing charge displacement and dipolar alignment, selectively, by utilizing wavelength dependent response of SHG to the two origins. In this paper, an experimental way that identifies polarity of electronic charge displacement, i.e., positive charge and negative charge, is proposed. Results showed that the use of local oscillator makes it possible to identify the polarity of charges by means of SHG. As an example, positive and negative charge distribution created by rubbing polyimide surface is illustrated.

3D video contents depend on the shooting condition, which is camera positioning. Depth range control in the post-processing stage is not easy, but essential as the video from arbitrary camera positions must be generated. If light field information can be obtained, video from any viewpoint can be generated exactly and post-processing is possible. However, a light field has a huge amount of data, and capturing a light field is not easy. To compress data quantity, we proposed the visually equivalent light field (VELF), which uses the characteristics of human vision. Though a number of cameras are needed, VELF can be captured by a camera array. Since camera interpolation is made using linear blending, calculation is so simple that we can construct a ray distribution field of VELF by optical interpolation in the VELF3D display. It produces high image quality due to its high pixel usage efficiency. In this paper, we summarize the relationship between the characteristics of human vision, VELF and VELF3D display. We then propose a method to control the depth range for the observed image on the VELF3D display and discuss the effectiveness and limitations of displaying the processed image on the VELF3D display. Our method can be applied to other 3D displays. Since the calculation is just weighted averaging, it is suitable for real-time applications.

Input devices based on direct touch have replaced traditional ones and become the mainstream interactive technology for handheld devices. Although direct touch interaction proves to be easy to use, its problems, e.g. the occlusion problem and the fat finger problem, lower user experience. Camera-based mobile interaction is one of the solutions to overcome the problems. There are two typical interaction styles to generate camera-based pointing interaction for handheld devices: move the device or move an object before the camera. In the first interaction style, there are two approaches to move a cursor's position across the handheld display: move it towards the same direction or the opposite direction which the device moves to. In this paper, the results of a comparison research, which compared the pointing performances of three camera-based pointing techniques, are presented. All pointing techniques utilized input from the rear-facing camera. The results indicate that the interaction style of moving a finger before the camera outperforms the other one in efficiency, accuracy, and throughput. The results also indicate that within the interaction style of moving the device, the cursor positioning style of moving the cursor to the opposite direction is slightly better than the other one in efficiency and throughput. Based on the findings, we suggest giving priority to the interaction style of moving a finger when deploying camera-based pointing techniques on handheld devices. Given that the interaction style of moving the device supports one-handed manipulation, it also worth deploying when one-handed interaction is needed. According to the results, the cursor positioning style of moving the cursor towards the opposite direction which the device moves to may be a better choice.

The phaseless antenna measurement technique is advantageous for high-frequency near-field measurements in which the uncertainty of the measured phase is a problem. In the phaseless measurement, which is expected to be used in the frequency band with a short wavelength, a slight positional deviation error of the probe greatly deteriorates the measurement result. This paper proposes a phase retrieval method that can compensate the measurement errors caused by misalignment of a probe and its jig. And this paper proposes a far-field estimation method by phase resurrection that incorporated the compensation techniques. We find that the positioning errors are due to the random errors occurring at each measurement point because of minute vibrations of the probe; in addition, we determine that the stationary depth errors occurring at each measurement surface as errors caused by improper setting of the probe jig. The random positioning error is eliminated by adding a low-pass filter in wavenumber space, and the depth positioning error is iteratively compensated on the basis of the relative residual obtained in each plane. The validity of the proposed method is demonstrated by estimating the far-field patterns using the results from numerical simulations, and is also demonstrated using measurement data with probe-positioning error. The proposed method can reduce the probe-positioning error and improve the far-field estimation accuracy by more over than 10 dB.

This paper proposes a transparent glass quartz antenna for 5G-millimeter-wave-connected vehicles and clarifies the characteristics of signal reception when the glass antennas are placed on the windows of a vehicle traveling in an urban environment. Synthetic fused quartz is a material particularly suited for millimeter-wave devices owing to its excellent low transmission loss. Realizing synthetic fused quartz devices requires accurate micromachining technology specialized for the material coupled with the material technology. This paper presents a transparent antenna comprising a thin mesh pattern on a quartz substrate for installation on a vehicle window. A comparison of distributed transparent antennas and an omnidirectional antenna shows that the relative received power of the distributed antenna system is higher than that of the omnidirectional antenna. In addition, results show that the power received is similar when using vertically and horizontally polarized antennas. The design is verified in a field test using transparent antennas on the windows of a real vehicle.

Build systems are essential tools for developing large software projects. Traditionally, build systems have been designed for high incremental-build performance. However, the longer build times of recent large C++ projects have imposed a requirement on build systems: i.e., unity builds. Unity builds are a build technique for speeding up sequential compilation of many source files by bundling multiple source files into one. Unity builds lead to a significant reduction in build time through removal of redundant parsing of shared header files. However, unity builds have a negative effect on incremental builds because each compiler task gets larger. Our previous study reported existing unity builds overlook many better bundle configurations that improve unity-build performance without increasing the incremental-build time. Motivated by the problem, we present a novel build system for better performance in unity builds. Our build system aims to achieve competitive unity-build performance in full builds with mitigating the negative effect on incremental builds. To accomplish this goal, our build system uses sophisticated bundle strategies developed on the basis of hints extracted from the preprocessed code of each source file. Thanks to the strategies, our build system finds better bundle configurations that improve both of the full-build performance and the incremental-build performance in unity builds. For example, in comparison with the state-of-the-art unity builds of WebKit, our build system improves build performance by 9% in full builds, by 39% in incremental builds, and by 23% in continuous builds that include both types of the builds.

Since wild animals are causing more accidents and damages, it is important to safely detect them as early as possible. In this paper, we propose two battery-powered wild animal detection nodes based on deep learning that can automatically detect wild animals; the detection information is notified to the people concerned immediately. To use the proposed nodes outdoors where power is not available, we devise power saving techniques for the proposed nodes. For example, deep learning is used to save power by avoiding operations when wild animals are not detected. We evaluate the operation time and the power consumption of the proposed nodes. Then, we evaluate the energy consumption of the proposed nodes. Also, we evaluate the detection range of the proposed nodes, the accuracy of deep learning, and the success rate of communication through field tests to demonstrate that the proposed nodes can be used to detect wild animals outdoors.

In this paper, we improve upon the automatic building extraction method, which uses a variational inference Gaussian mixture model for performing color clustering, by accelerating its computational speed. The improved method decreases the computational time using an image with reduced resolution upon applying color clustering. According to our experiment, in which we used 106 scenery images, the improved method could extract buildings at a rate 86.54% faster than that of the conventional methods. Furthermore, the improved method significantly increased the extraction accuracy by 1.8% or more by preventing over-clustering using the reduced image, which also had a reduced number of the colors.

A quadratic extension field (QEF) defined by F1 = Fp[α]/(α2+1) is typically used for a supersingular isogeny Diffie-Hellman (SIDH). However, there exist other attractive QEFs Fi that result in a competitive or rather efficient performing the SIDH comparing with that of F1. To exploit these QEFs without a time-consuming computation of the initial setting, the authors propose to convert existing parameter sets defined over F1 to Fi by using an isomorphic map F1 → Fi.

We propose a coding/decoding strategy that surpasses the symmetric information rate of a binary insertion/deletion (ID) channel and approaches the Markov capacity of the channel. The proposed codes comprise inner trellis codes and outer irregular low-density parity-check (LDPC) codes. The trellis codes are designed to mimic the transition probabilities of a Markov input process that achieves a high information rate, whereas the LDPC codes are designed to maximize an iterative decoding threshold in the superchannel (concatenation of the ID channels and trellis codes).

Authors had proposed a hybrid electromagnetic field analysis method suitable for an airport surface so far. In this paper, the hybrid method is validated by measurements by using a 1/50 scale-model of an airport considering several layouts of the buildings and sloping ground. The measured power distributions agreed with the analyzed ones within 5 dB errors excepting null points and the null positions of the distribution is also estimated within one wavelength errors.

Large-scale disasters can lead to a severe damage or destruction of optical transport networks including the data-plane (D-plane) and control and management-plane (C/M-plane). In addition to D-plane recovery, quick recovery of the C/M-plane network in modern software-defined networking (SDN)-based fiber optical networks is essential not only for emergency control of surviving optical network resources, but also for quick collection of information related to network damage/survivability to enable the optimal recovery plan to be decided as early as possible. With the advent of the Internet of Things (IoT) technologies, low energy consumption, and low-cost IoT devices have been more common. Corresponding long-distance networking technologies such as low-power wide-area (LPWA) and LPWA-based mesh (LPWA-mesh) networks promise wide coverage sensing and environment data collection capabilities. We are motivated to take an infrastructure-less IoT approach to provide long-distance, low-power and inexpensive wireless connectivity and create an emergency C/M-plane network for early disaster recovery. In this paper, we investigate the feasibility of fiber networks C/M-plane recovery using an IoT-based extremely narrow-band, and lossy links system (FRENLL). For the first time, we demonstrate a field-trial experiment of a long-latency/loss tolerable SDN C/M-plane that can take advantage of widely available IoT resources and easy-to-create wireless mesh networks to enable the timely recovery of the C/M-plane after disaster.

For insertion and deletion channels, there are many coding schemes based on low-density parity-check (LDPC) codes, such as spatially coupled (SC) LDPC codes and concatenated codes of irregular LDPC codes and markers. However, most of the previous works have problems, such as poor finite-length performance and unrealistic settings for codeword lengths and decoding iterations. Moreover, when using markers, the decoder receives log-likelihood (LLR) messages with different statistics depending on code bit position. In this paper, we propose a novel concatenation scheme using protograph-based LDPC code and markers that offers excellent asymptotic/finite-length performance and a structure that controls the irregularity of LLR messages. We also present a density evolution analysis and a simple optimization procedure for the proposed concatenated coding scheme. For two decoding scenarios involving decoding complexity, both asymptotic decoding thresholds and finite-length performance demonstrate that the newly designed concatenated coding scheme outperforms the existing counterparts: the irregular LDPC code with markers, the SC-LDPC code, and the protograph LDPC code, which is optimized for an additive white Gaussian noise channel, with markers.

In this paper, we analyzed the pulse responses of dispersion medium with periodically conducting strips by using a fast inversion Laplace transform (FILT) method combined with point matching method (PMM) for both the TM and TE cases. Specifically, we investigated the influence of the width and number of the conducting strips on the pulse response and distribution of the electric field.

We demonstrated a compact 16×16 multicast switch (MCS) made from a silica-based planar lightwave circuit (PLC). The switch utilizes a new electrical connection method based on surface mount technology (SMT). Five electrical connectors are soldered directly to the PLC by using the standard reflow process used for electrical devices. We reduced the chip size to half of one made with conventional wire bonding technology. We obtained satisfactory solder contacts and excellent switching properties. These results indicate that the proposed method is suitable for large-scale optical switches including MCSs, variable optical attenuators, dispersion compensators, and so on.

We demonstrated 1-Tb/s-class transmissions of field-deployed large-core low-loss fiber links, which is compliant with ITU-T G.654.E, using our newly developed real-time transponder consisting of a state-of-the-art 16-nm complementary metal-oxide-semiconductor (CMOS) based digital signal processing application-specific integrated circuit (DSP-ASIC) and an indium phosphide (InP) based high-bandwidth coherent driver modulator (HB-CDM). In this field experiment, we have achieved record transmission distances of 1122km for net data-rate 1-Tb/s transmission with dual polarization-division multiplexed (PDM) 32 quadrature amplitude modulation (QAM) signals, and of 336.6 km for net data-rate 1.2-Tb/s transmission with dual PDM-64QAM signals. This is the first demonstration of applying hybrid erbium-doped fiber amplifier (EDFA) and backward-distributed Raman amplifier were applied to terrestrial G.654.E fiber links. We also confirmed the stability of signal performance over field fiber transmission in wavelength division multiplexed (WDM) condition. The Q-factor fluctuations respectively were only less than or equal to 0.052dB and 0.07dB for PDM-32QAM and PDM-64QAM signals within continuous measurements for 60 minutes.

In this letter, the structural analysis of nonbinary cyclic and quasi-cyclic (QC) low-density parity-check (LDPC) codes with α-multiplied parity-check matrices (PCMs) is concerned. Using analytical methods, several structural parameters of nonbinary cyclic and QC LDPC codes with α-multiplied PCMs are determined. In particular, some classes of nonbinary LDPC codes constructed from finite fields and finite geometries are shown to have good minimum and stopping distances properties, which may explain to some extent their wonderful decoding performances.

Vehicle logo detection technology is one of the research directions in the application of intelligent transportation systems. It is an important extension of detection technology based on license plates and motorcycle types. A vehicle logo is characterized by uniqueness, conspicuousness, and diversity. Therefore, thorough research is important in theory and application. Although there are some related works for object detection, most of them cannot achieve real-time detection for different scenes. Meanwhile, some real-time detection methods of single-stage have performed poorly in the object detection of small sizes. In order to solve the problem that the training samples are scarce, our work in this paper is improved by constructing the data of a vehicle logo (VLD-45-S), multi-stage pre-training, multi-scale prediction, feature fusion between deeper with shallow layer, dimension clustering of the bounding box, and multi-scale detection training. On the basis of keeping speed, this article improves the detection precision of the vehicle logo. The generalization of the detection model and anti-interference capability in real scenes are optimized by data enrichment. Experimental results show that the accuracy and speed of the detection algorithm are improved for the object of small sizes.

In this paper, we propose a notion for high-dimensional generalizations of mutually orthogonal Latin squares (MOLS) and mutually orthogonal diagonal Latin squares (MODLS), called mutually dimensionally orthogonal d-cubes (MOC) and mutually dimensionally orthogonal diagonal d-cubes (MODC). Systematic constructions for MOC and MODC by using polynomials over finite fields are investigated. In particular, for 3-dimensional cubes, the results for the maximum possible number of MODC are improved by adopting the proposed construction.

Over the past two decades, irregular low-density parity-check (LDPC) codes have not been able to decode information corrupted by insertion and deletion (ID) errors without markers. In this paper, we bring to light the existence of irregular LDPC codes that approach the symmetric information rates (SIR) of the channel with ID errors, even without markers. These codes have peculiar shapes in their check-node degree distributions. Specifically, the check-node degrees are scattered and there are degree-2 check nodes. We propose a code construction method based on the progressive edge-growth algorithm tailored for the scattered check-node degree distributions, which enables the SIR-approaching codes to progress in the finite-length regime. Moreover, the SIR-approaching codes demonstrate asymptotic and finite-length performance that outperform the existing counterparts, namely, concatenated coding of irregular LDPC codes with markers and spatially coupled LDPC codes.