In this letter, an active complex filter with finite transmission zeros is proposed. In order to obtain a complex prototype ladder filter including no inductors, a new circuit transformation is proposed. This circuit is classified into the RiCR filter. It is shown that it includes no negative capacitors when it is obtained through a frequency transformation. The validity of the proposed method is confirmed through computer simulation.

This paper proposes a simple source data exchange method for channel switching in space-time block code. If one transmits source data on another antenna, then the receiver should change combining method in order to adapt it. No one except knowing the channel switching sequence can decode the received data correctly. In case of exchanging data for channel switching, four orthogonal frequency division multiplexing symbols are exchanged according to a format of space-time block code. In this paper, I proposes two simple sign exchanges without exchanging four orthogonal-frequency division multiplexing symbols which occurs a different combining and channel switching method in the receiver.

Time-sequence data is high dimensional and contains a lot of information, which can be utilized in various fields, such as insurance, finance, and advertising. Personal data including time-sequence data is converted to anonymized datasets, which need to strike a balance between both privacy and utility. In this paper, we consider low-rank matrix factorization as one of anonymization methods and evaluate its efficiency. We convert time-sequence datasets to matrices and evaluate both privacy and utility. The record IDs in time-sequence data are changed at regular intervals to reduce re-identification risk. However, since individuals tend to behave in a similar fashion over periods of time, there remains a risk of record linkage even if record IDs are different. Hence, we evaluate the re-identification and linkage risks as privacy risks of time-sequence data. Our experimental results show that matrix factorization is a viable anonymization method and it can achieve better utility than existing anonymization methods.

This work develops a system called CLAP that detects and classifies “potentially unwanted applications” (PUAs) such as adware or remote monitoring tools. Our approach leverages DNS queries made by apps. Using a large sample of Android apps from third-party marketplaces, we first reveal that DNS queries can provide useful information for detection and classification of PUAs. We then show that existing DNS blacklists are limited when performing these tasks. Finally, we demonstrate that the CLAP system performs with high accuracy.

In an OFDM communication system using quadrature amplitude modulation (QAM) signals, peak envelope powers (PEPs) of the transmitted signals can be well controlled by using QAM Golay complementary sequence pairs (CSPs). In this letter, by making use of a new construction, a family of new 16-QAM Golay CSPs of length N=2m (integer m≥2) with binary inputs is presented, and all the resultant pairs have the PEP upper bound 2N. However, in the existing such pairs from other references their PEP upper bounds can arrive at 3.6N when the worst case happens. In this sense, novel pairs are good candidates for OFDM applications.

A method to reconstruct the surface shape of a scatterer from the relative intensity of the scattered field is proposed. Reconstruction of the scatterer shape has been studied as an inverse problem. An approach that employs boundary-integral equations can determine the scatterer shape with low computation resources and high accuracy. In this method, the reconstruction process is performed so that the error between the measured far field of the sample and the computed far field of the estimated scatterer shape is minimized. The amplitude of the incident wave at the sample is required to compute the scattered field of the estimated shape. However, measurement of the incident wave at the sample (measurement without the sample) is inconvenient, particularly when the output power of the wave source is temporally unstable. In this study, we improve the reconstruction method with boundary-integral equations for practical use and expandability to various types of samples. First, we propose new boundary-integral equations that can reconstruct the sample shape from the relative intensity at a finite distance. The relative intensity is independent from the amplitude of the incident wave, and the reconstruction process can be performed without measuring the incident field. Second, the boundary integral equation for reconstruction is discretized with boundary elements. The boundary elements can flexibly discretize various shapes of samples, and this approach can be applied to various inverse scattering problems. In this paper, we present a few reconstruction processes in numerical simulations. Then, we discuss the reason for slow-convergence conditions and introduce a weighting coefficient to accelerate the convergence. The weighting coefficient depends on the distance between the sample and the observation points. Finally, we derive a formula to obtain an optimum weighting coefficient so that we can reconstruct the surface shape of a scatterer at various distances of the observation points.

Radio signals show small characteristic differences between radio transmitters resulted from their idiosyncratic hardware properties. Based on the parameters estimation of transmitter imperfections, a novel radiometric identification method is presented in this letter. The fingerprint features of the radio are extracted from the mismatches of the modulator and the nonlinearity of the power amplifier, and used to train a support vector machine classifier to identify the class label of a new data. Experiments on real data sets demonstrate the validation of this method.

Under the framework of traditional power spectrum based feature extraction, in order to extract more discriminative information for playback attack detection, this paper proposes a feature by making use of deep neural network to describe the nonlinear relationship between power spectrum and discriminative information. Namely, constant-Q deep coefficients (CQDC). It relies on constant-Q transform, deep neural network and discrete cosine transform. In which, constant-Q transform is used to convert signal from the time domain into the frequency domain because it is a long-term transform that can provide more frequency detail, deep neural network is used to extract more discriminative information to discriminate playback speech from genuine speech and discrete cosine transform is used to decorrelate among the feature dimensions. ASVspoof 2017 corpus version 2.0 is used to evaluate the performance of CQDC. The experimental results show that CQDC outperforms the existing power spectrum obtained from constant-Q transform based features, and equal error can reduce from 19.18% to 51.56%. In addition, we found that discriminative information of CQDC hides in all frequency bins, which is different from commonly used features.

This Letter explores the adaptive hybrid automatic repeat request (HARQ) using rate-compatible polar codes constructed with a common information set. The rate adaptation problem is formulated using Markov decision process and solved by a dynamic programming framework in a low-complexity way. Simulation verifies the throughput efficiency of the proposed adaptive HARQ.

One goal in stack-queue mixed layouts of a graph subdivision is to obtain a layout with minimum number of subdivision vertices per edge when the number of stacks and queues are given. Dujmović and Wood showed that for every integer s, q>0, every graph G has an s-stack q-queue subdivision layout with 4⌈log(s+q)q sn(G)⌉ (resp. 2+4⌈log(s+q)q qn(G)⌉) division vertices per edge, where sn(G) (resp. qn(G)) is the stack number (resp. queue number) of G. This paper improves these results by showing that for every integer s, q>0, every graph G has an s-stack q-queue subdivision layout with at most 2⌈logs+q-1sn(G)⌉ (resp. at most 2⌈logs+q-1qn(G)⌉ +4) division vertices per edge. That is, this paper improves previous results more, for graphs with larger stack number sn(G) or queue number qn(G) than given integers s and q. Also, the larger the given integer s is, the more this paper improves previous results.

Power line communications (PLC) is a communication technology that uses a power-line as a transmission medium. Previous studies have shown that connecting an AC adapter such as a mobile phone charger to the power-line affects signal quality. Therefore, in this paper, the authors analyze the influence of chargers on inter-computer communications using packet capture to evaluate communications quality. The analysis results indicate the occurrence of a short duration in which packets are not detected once in a half period of the power-line supply: named communication forbidden time. For visualizing the communication forbidden time and for evaluating the communications quality of the inter-computer communications using PLC, the authors propose an instantaneous power-line frequency synchronized superimposed chart and its plotting algorithm. Further, in order to analyze accurately, the position of the communication forbidden time can be changed by altering the initial burst signal plotting position. The difference in the chart, which occurs when the plotting start position changes, is also discussed. We show analysis examples using the chart for a test bed data assumed an ideal environment, and show the effectiveness of the chart for analyzing PLC inter-computer communications.

Blob detection is an important part of computer vision and a special case of region detection with important applications in the image analysis. In this paper, the dilation operator in standard mathematical morphology is firstly extended to the order dilation operator of soft morphology, three soft morphological filters are designed by using the operator, and a novel blob detection algorithm called SMBD is proposed on that basis. SMBD had been proven to have better performance of anti-noise and blob shape detection than similar blob filters based on mathematical morphology like Quoit and N-Quoit in terms of theoretical and experimental aspects. Additionally, SMBD was also compared to LoG and DoH in different classes, which are the most commonly used blob detector, and SMBD also achieved significantly great results.

Thanks to the ability to bring immersive experiences to users, Virtual Reality (VR) technologies have been gaining popularity in recent years. A key component in VR systems is omnidirectional content, which can provide 360-degree views of scenes. However, at a given time, only a portion of the full omnidirectional content, called viewport, is displayed corresponding to the user's current viewing direction. In this work, we first develop Weighted-Viewport PSNR (W-VPSNR), an objective quality metric for quality assessment of omnidirectional content. The proposed metric takes into account the foveation feature of the human visual system. Then, we build a subjective database consisting of 72 stimuli with spatial varying viewport quality. By using this database, an evaluation of the proposed metric and four conventional metrics is conducted. Experiment results show that the W-VPSNR metric well correlates with the mean opinion scores (MOS) and outperforms the conventional metrics. Also, it is found that the conventional metrics do not perform well for omnidirectional content.

A low-complexity time-invariant angle-range dependent directional modulation (DM) based on time-modulated frequency diverse array (TM-FDA-DM) is proposed to achieve point-to-point physical layer security communications. The principle of TM-FDA is elaborated and the vector synthesis method is utilized to realize the proposal, TM-FDA-DM, where normalization and orthogonal matrices are designed to modulate the useful baseband symbols and inserted artificial noise, respectively. Since the two designed matrices are time-invariant fixed values, which avoid real-time calculation, the proposed TM-FDA-DM is much easier to implement than time-invariant DMs based on conventional linear FDA or logarithmical FDA, and it also outperforms the time-invariant angle-range dependent DM that utilizes genetic algorithm (GA) to optimize phase shifters on radio frequency (RF) frontend. Additionally, a robust synthesis method for TM-FDA-DM with imperfect angle and range estimations is proposed by optimizing normalization matrix. Simulations demonstrate that the proposed TM-FDA-DM exhibits time-invariant and angle-range dependent characteristics, and the proposed robust TM-FDA-DM can achieve better BER performance than the non-robust method when the maximum range error is larger than 7km and the maximum angle error is larger than 4°.

This paper introduces methods to modify a buggy sequential gate-level circuit to conform to the specification. In order to preserve the optimization efforts, the modifications should be as small as possible. Assuming that the locations to be modified are given, our proposed method finds an appropriate set of fan-in signals for the patch function of those locations by iteratively calculating the state correspondence between the specification and the buggy circuit and applying a method for debugging combinational circuits. The experiments are conducted on ITC99 benchmark circuits, and it is shown that our proposed method can work when there are at most 30,000 corresponding reachable state pairs between two circuits. Moreover, a heuristic method using the information of data-path FFs is proposed, which can find a correct set of fan-ins for all the benchmark circuits within practical time.

We propose a distributed blind equalization method for wireless sensor networks, in which a source sends data and each node performs time-domain equalization to estimate the data from a received signal that is affected by inter-symbol interference. The equalization can be performed distributively based on the mutually referenced equalization principle. Even if the nodes in the network are not fully connected to each other, the average consensus technique enables us to perform the equalization of all channels.

Sequences that attain the smallest possible absolute sidelobes (SPASs) of periodic autocorrelation function (PACF) play fairly important roles in synchronization of communication systems, Large scale integrated circuit testing, and so on. This letter presents an approach to construct 16-QAM sequences of even periods, based on the known quaternary sequences. A relationship between the PACFs of 16-QAM and quaternary sequences is established, by which when quaternary sequences that attain the SPASs of PACF are employed, the proposed 16-QAM sequences have good PACF.

Filter bank multicarrier with offset quadrature amplitude modulation (FBMC-OQAM) is considered an alternative to conventional orthogonal frequency division multiplexing (OFDM) to meet the various requirements proposed by future communication networks. Among the different perspectives on the merits of FBMC-OQAM and OFDM, a straightforward metric is the bit error probability (BEP). This paper presents a general analytical framework for BEP evaluation that is applicable to FBMC-OQAM and OFDM systems in both Rayleigh and Rician multipath fading channels. Explicit BEP expressions are derived for Gray-coded pulse amplitude modulation (PAM) and square quadrature amplitude modulation (QAM) signals with arbitrary constellation sizes. The theoretical analysis results show excellent agreement with the numerical simulation results in different channel scenarios.

Volleyball video analysis plays important roles in providing data for TV contents and developing strategies. Among all the topics of volleyball analysis, qualitative player action recognition is essential because it potentially provides not only the action that being performed but also the quality, which means how well the action is performed. However, most action recognition researches focus on the discrimination between different actions. The quality of an action, which is helpful for evaluation and training of the player skill, has only received little attention so far. The vital problems in qualitative action recognition include occlusion, small inter-class difference and various kinds of appearance caused by the player change. This paper proposes a 3D global and multi-view local features combination based recognition framework with global team formation feature, ball state feature and abrupt pose features. The above problems are solved by the combination of 3D global features (which hide the unstable and incomplete 2D motion feature caused by occlusion) and the multi-view local features (which get detailed local motion features of body parts in multiple viewpoints). Firstly, the team formation extracts the 3D trajectories from the whole team members rather than a single target player. This proposal focuses more on the entire feature while eliminating the personal effect. Secondly, the ball motion state feature extracts features from the 3D ball trajectory. The ball motion is not affected by the personal appearance, so this proposal ignores the influence of the players appearance and makes it more robust to target player change. At last, the abrupt pose feature consists of two parts: the abrupt hit frame pose (which extracts the contour shape of the player's pose at the hit time) and abrupt pose variation (which extracts the pose variation between the preparation pose and ending pose during the action). These two features make difference of each action quality more distinguishable by focusing on the motion standard and stability between different quality actions. Experiments are conducted on game videos from the Semifinal and Final Game of 2014 Japan Inter High School Games of Men's Volleyball in Tokyo Metropolitan Gymnasium. The experimental results show the accuracy achieves 97.26%, improving 11.33% for action discrimination and 91.76%, and improving 13.72% for action quality evaluation.

Hybrid 200Gchip/s QAM-based opto-electrical labels with high orthogonality are generated using the convolution of optical 16-level and electrical 4-level PSK codes. The combined simultaneous use of optical and electrical encoding increases system flexibility and code orthogonality, as well as code recognition performance. By performing 50 G-class low-speed LN-PM-based electrical processing on the 200 Gchip/s PSK-based optical code labels generated by a multiport optical encoder, the value of PCR indicating the code orthogonality is increased significantly, and the receiver sensitivity is improved by 0.5dB to achieve LER =10-9 in the next-generation optical packet switching networks.