In this paper, we propose two parallel processing methods for multidimensional (MD) sampling lattice alteration. The use of our proposed methods enables us to alter the sampling lattice of a given MD signal sequence in parallel without any redundancy caused by up- and down-sampling, even if the alteration is rational and non-separable. Our proposed methods are provided by extending two conventional block processing techniques for FIR filtering: the overlap-add method and the overlap-save method. In these proposed methods, firstly a given signal sequence is segmented into some blocks, secondly sampling lattice alteration is implemented for each block data individually, and finally the results are fitted together to obtain the output sequence which is identical to the sequence obtained from the direct sampling lattice alteration. Besides, we provide their efficient implementation: the DFT-domain approach, and give some comments on the computational complexity in order to show the effectiveness of our proposed methods.

This paper presents an improved neural network for channel assignment problems in cellular mobile communication systems in the new co-channel interference model. Sengoku et al. first proposed the neural network for the same problem, which can find solutions only in small size cellular systems with up to 40 cells in our simulations. For the practical use in the next generation's cellular systems, the performance of our improved neural network is verified by large size cellular systems with up to 500 cells. The newly defined energy function and the motion equation with two heuristics in our neural network achieve the goal of finding optimum or near-optimum solutions in a nearly constant time.

A subharmonic injection-locked oscillator (ILO) MMIC chain is proposed for the local oscillators and synthesizers used at millimeter-wave frequencies. A fabricated, primary 11-GHz-band injection-locked oscillator MMIC for the first stage ILO in the ILO-chain MMIC, achieves a wide subharmonic-injection-locking range at the subharmonic factors, 1/n (n=1, 2, 3, ), of 1/1, 1/2 and 1/3. The ILO MMIC abilities for synthesizer applications were confirmed with an injection-locking time of only 100-200 nsec, which is less than 1/100 that of PLL oscillators, and also with free-running oscillation performance and a wide injection locking range within a temperature range of -30 and 80.

We have developed a planar devic technology consisting of 0.15-µm Au/WSiN-gate GaAs-heterostructure MESFETs (HMESFETs) fabricated by self-aligned ion-implantation. The gate-drain breakdown voltage has been improved to 10 V by using an asymmetric LDD structure, and the maximum oscillation frequency is 190 GHz. Because asymmetric and symmetric FETs can be fabricated simultaneously, this technology is suitable for use in making multi-functional millimeter-wave MMICs.

Multifrequency microwave radiometry has been investigated for non-invasive measurement of temperatures in a human body. In this paper, we propose a new temperature profile model function, which is based on thermo-physiological considerations, for use in model fitting method of retrieving a temperature profile from a set of multifrequency radiometric data. The microwave radiometric technique using the new model function was tested by numerical simulations against animal experiment and clinical data reported elsewhere. The results show that the microwave radiometric technique can be used effectively to measure temperature profiles in tissues over a depth range from 0 to about 4.5 cm.

A full confocal Gaussian beam open resonator system that determines the dielectric properties of low-loss materials in the 60-GHz band is developed. To achieve high Q values a quasi-optical coupling method is used to feed the resonator. It is connected to a computer-controlled HP 8510C vector network analyzer for automatic measurement. The frequency variation method is used and the data are processed using the open resonator scalar theory. Results from 96% and 99.5% alumina samples with thicknesses ranging from 0.38 mm to 1 mm, are presented in the V band, with loss tangent values of the order of 100 µ radians. This system should be able to measure substrates as thin as less than 0.1 mm to 0.3 mm, which are the thicknesses of substrates in practical use.

A transmission power control technique on a TDD-CDMA/TDMA system for wireless multimedia networks is proposed. The assumed network connects mobile terminals to a node of an ATM based high speed LAN through a radio central unit. Only human interface facilities are implemented into the terminal so that users access integrated services through the node of the network. The uplink (from a mobile terminal to a radio central unit) employs a CDMA scheme to transmit human interface signals (2.4kbit/s) and the downlink employs a TDMA scheme to transmit display interface signals (24 Mbit/s). Both the CDMA and the TDMA signals occupy the same frequency band. To mitigate bit error rate degradation due to the fading, the radio central unit estimates the impulse response of the channel from the received CDMA signals and controls the transmission power of the TDMA signals to compensate the fading attenuation. The bit error rate performance of the downlink with the proposed transmission power control is theoretically analyzed under several fading conditions. Numerical results using the Nakagami-m fading model and recent propagation measurements show that the proposed power control technique compensates the fading attenuation and improves the bit error rate performances. The bit error rate of the downlink is reduced from 10-2 to 10-5 at the symbol SNR of 20dB by employing the proposed transmission power control, which is less sensitive to the severity of the fading. Furthermore, the proposed transmission power control is implemented without increasing the terminal complexity because all the processing on the power control of the downlink is carried out only in the radio central unit.

The most creative tasks in synthesizing pipelined data paths executing software descriptions are determinations of latency and stage of pipeline, operation scheduling and hardware allocation. They are interrelated closely and depend on each other; thus finding its optimal solution has been a hard problem so far. By using simulated annealing methodology, these three tasks can be formulated as a three dimensional placement problem of operations in stage, time step and functional units space. This paper presents an efficient method based on simulated annealing to provide excellent solutions to the problem of not only the determinations of latency and stage of pipeline, operation scheduling and hardware allocation simultaneously, but also the pipelined data path synthesis under the constraints of performance or hardware cost. It is able to find a near optimal latency and stage of pipeline, an operation schedule and a hardware allocation in a reasonable time, while effectively exploring the existing tradeoffs in the design space.

This paper deals with the method of integration of voice and data in wireless communication systems. By applying the DSV (Data Steal into Voice) technique to D-TDMA (Dynamic Time Division Multiple Access) systems, this paper presents an MAC (Media Access Control) method of integration of voice and data for the systems such as cellular radios and cordless phones. After a brief review of the D-TDMA scheme and the DSV technique, the protocol called D-TDMA/DSV is described. Then, a static analysis to derive the channel capacity and a dynamic analysis to evaluate the throughput and delay performance are presented. An extension of TFA (Transient Fluid Approximation) analysis is employed in the dynamic analysis. With the same system parameters, the capacity of D-TDMA/DSV is compared with that of the traditional D-TDMA. Under the limitation of the blocking probability required for cellular radios, some numerical examples of dynamic analysis are given to show the throughput and delay performance of the system.

The simulation of a specific absorption rate (SAR) with a temperature distribution becomes more important in the treatment planning for microwave hyperthermia. The simulation technique can also be used to estimate SAR distribution inside human body under hazardous electromagnetic (EM) field circumstances. In the simulation, to use exact permittivity of biological tissues becomes very important to obtain accurate SAR distribution. The permittivity of the medium is very sensitive to the temperature. Therefore, it is considered that the SAR distribution is also very sensitive to the tissue temperature. In this paper, SAR distribution is calculated using FDTD method considering tissue temperature under the electromagnetic (EM) field irradiation. Simulations of temperature distribution are also performed using heat transfer equation. In addition, temperature depending blood flow is taking into account to obtain temperature depending SAR distribution. The results can be used to estimate temperature depending heat generation which can be applied such as microwave hyperthermia treatment.

This paper describes the multiple access performance of parallel combinatory spread spectrum (PC/SS) communication systems in nonfading and Rayleigh fading multipath channels. The PC/SS systems can provide the high-speed data transmission capability by transmitting multiple pseudo-noise sequences out of a pre-assigned sequence set. The performance is evaluated in terms of average bit error rate (BER) by numerical computation. In nonfading white gaussian channel, the PC/SS systems are superior to conventional direct sequence spread spectrum (DS/SS) systems under the identical spreading factor condition. In Rayleigh fading channel, the performance of the PC/SS system without diversity is poorer than that of the DS/SS system. By including the explicit and implicit diversity, the performance of the PC/SS system becomes better than that of conventional DS/SS systems. A longer spreading sequence is assignable to a PC/SS system having the spreading factor equal to that in the conventional DS/SS system. Hence, the error control coding is easily. It is found that the PC/SS systems including diversity and Reed-Solomon coding improves the multiple access performance.

This paper proposes a human interface where a novel input method is used to substitute conventional input devices. It overcomes the deficiencies of physical devices, as it is based on image processing techniques. The proposed interface is composed of three parts: extraction of a person's handshape from a digitized image, detection of its fingertip, and interpretation by a software application. First, images of a pointing hand are digitized to obtain a sequence of monochrome frames. In each frame the hand is isolated from the background by means of gray-level slicing; with threshold values calculated dynamically by the combination of movement detection and histogram analysis. The advantage of this approach is that the system adapts itself to any user and compensates any changes in the illumination, while in conventional methods the threshold values are previously defined or markers have to be attached to the hand in order to give reference points. Second, once the hand is isolated, fingertip coordinates are extracted by scanning the image. Third, the coordinates are inputted to an application interface. Overall, as the algorithms are simple and only monochrome images are used, the amount of processing is kept low, making this system suitable to real-time processing without needing expensive hardware.

A channel equalization technique on a time division duplex CDMA/TDMA system for wireless multimedia networks is investigated, and the bit error rate performance of the system is theoretically analyzed. The assumed network connects mobile terminals to a node of ATM based high speed LAN through a radio central unit. Only human interface facilities are implemented into the terminal so that users access integrated services through the node of the network. The uplink (from a mobile terminal to a radio central unit) employs a CDMA scheme to transmit human interface signals and the downlink employs a TDMA scheme to transmit display interface signals. Both the CDMA and the TDMA signals occupy the same frequency band. To mitigate bit error rate degradation due to fading, the radio central unit estimates the impulse response of the channel from the received CDMA signals and subtracts the replica signal to cancel the major intersymbol interference (ISI) component. Numerical results using the Nakagami-m fading model and recent propagation measurements show that the proposed TPC technique compensates the fading attenuation and the proposed CEQ cancels the major ISI component. The bit error rate performance of the downlink with the proposed CEQ is superior to that with the DFE by 12dB of the symbol SNR at the BER=10-6 over a specular channel, and the system with the proposed CEQ achieves a BER=10-6 at the symbol SNR=12dB. Furthermore, the channel equalizer is implemented without increases in complexity of the terminal because all the processing on the equalization is carried out only in the radio central unit.

To support high bit rate and high quality indoor radio communication systems, we have to solve intersymbol interference (ISI) problem caused by frequency-selective fading. Recently multi-carrier modulation technique is considered to be one of the effective methods for this problem. In this paper we propose Partial Frequency ARQ (Automatic Repeat reQuest) system which can achieve effective ARQ scheme for multi-carrier packet communication. This system operates partial retransmission of erroneous power faded packets, and it is superior to the traditional ARQ systems. Furthermore two different protocols are examined for this system: Static Carrier Assignment (SCA) and Dynamic Carrier Assignment (DCA). By computer simulation we found that DCA method can achieve better performance than SCA in terms of both throughput and packet transmission delay.

The investigation of device functions required from the systems point of view will be important for the development of the next generation of VLSI devices and systems. In this paper, a super pass transistor (SPT) model is presented as a quantum device candidate for future VLSI systems based on multiple-valued logic. A possible quantum device structure for the SPT model is also described, which employs the concepts of a lateral-resonant-tunneling quantum-dot transistor and a heterostructure field-effect transistor. Since it has the powerful capability of detecting multiple signal levels, the SPT will be useful for the implementation of highly compact multiple-valued VLSI systems. To exploit the functionality of the SPT, a super pass gate (SP-gate) corresponding to a single SPT is proposed as a multiple-valued universal logic module. The mathematical properties of the SP-gate are discussed. A design method for a multiple-valued SP-gate network is presented. An application of SP-gates to a multiple-valued image processing system is also demonstrated. The SP-gate network for the multiple-valued image processing system is evaluated in comparison with the corresponding NMOS implementation in terms of the number of transistors, interconnections and cascaded transistor stages. The size of a generalized series-parallel SP-gate network is also evaluated in comparison with a functionally equivalent multiple-valued series-parallel MOS pass transistor network. The results show that highly compact multiple-valued VLSI systems can be achieved if the SPT-model can be realized by an actual quantum device.

A fiber optic temperature sensor using a conventional graded index multimode optical fiber is proposed. The multimode fiber is excited by two selected modes using a computer-generated holographic filter. A clear periodic signal created by interference between two modes is observed in the experiment.

The subject is the horizontal coil's temperature rise in DY for high frequency by being unavoidable for the tendency of more information on display monitor equipments. Writers made the temperature-balance model from a point of view that this temperature rise is coming from the heat rise and the conductivity, and we expressed the temperature rise of DY by using amount of the heat rise and conductivity characteristics of each element. Also, we indicated the method to decide about the selection of the wire size of coils, the section area and deflection sensitivity, with regard to reducing the temperature rise. We confirmed the effect of the temperature rise reduction by about 9 on products, under the condition of 64 kHz horizontal frequency.

Currently there is considerable world-wide speculation regarding the introduction of optical fiber cable into access networks, because optical fiber has a big potential for providing attractive multimedia services. Since optical fiber cable can provide a variety of grade of services, high-reliability of cable networks would be required compared with the conventional copper cable networks. To develop multimedia telecommunication networks as an infrastructure, it is urgent to clarify the highly reliable optical fiber cable network architecture. Since cable network architecture deeply depends on regional conditions such as demand, area size, duct layer networks (consisting of ducts, manholes, tunnels, feeder points etc.), it is necessary to develop a cable network designing tool with user-friendly interfaces for efficiently evaluating cable network architectures. This paper firstly proposes the heuristic algorithms enhanced by the disjoint-shortest-path and the depth-first-search methods that would be applicable for real access networks. Secondly, the design method of highly reliable optical fiber cable network based on the heuristic algorithms in terms of network cost and unavailability caused by cable breakdown is proposed. It can design the combination of star- and loop-shaped (where two diversified routes exist between a feeder point and central office) cable network. Furthermore, comparison with the conventional design method which simply applies star- or loop-shaped cable network is done in terms of economy and reliability on real access networks in the Tokyo metropolitan area. It is concluded that the proposed method can reduce the network cost further and realize a short unavailability value compared with the conventional method.

The applicability of Dynamic Channel Assignment methods to a Reuse Partitioning system in cellular radio systems is investigated in this paper. The investigations indicate that such a system has a tendency to increase the difference between blocking probability for the partitioning two coverage areas in comparison with the conventional Reuse Partitioning system employing Fixed Channel Assignment method. Two schemes using new Channel Rearrangement algorithms are also proposed in order to alleviate the difference as a disadvantage which gives unequal service to the system. The simulation results show that the proposed schemes are able to reduce the difference significantly while increasing the carried traffic by 10% as compared with the conventional system.

We compared--for the same propagation conditions and parameters--the performances of distributed dynamic channel assignment (DDCA) strategies and the performance of fixed channel assignment (FCA). This comparison quantitatively showed the effects of DDCA strategies in increasing spectrum efficiency. It also showed that using DDCA with transmitter power control (TPC) increases the system capacity to 3 4 times what it is with FCA and to 1.4 1.8 times what it is when using DDCA without TPC. We also evaluated the blocking rate and the interference probability for the inside of a cell and found that these are generally much higher close to the cell border than they are near the base station.